Synthesis and P-P cleavage reactions of [P(X)X']2; X-ray structures of [Co[P(X)X'](CO)3] and P4[P(X)X']2[X = N(SiMe3)2, X'= NPri2

Treatment of P(X)(X')Cl with KC8 gave the crystalline diphosphine [P(X)X']2 (1) which dissociated reversibly into the phosphinyl radical *P(X)X' (2), a plausible intermediate in the reaction of with [Cr(CO)6], [Co(NO)(CO)3] or P4, yielding [Cr[P(X)X']2(CO)3] (3), [Co[P(X)X'](CO)3] (4), or 1,4-P4[P(X)X']2 (5); the P(X)X' substituent is pyramidal at P in but planar in [X = N(SiMe3)2, X'= NPri2].     

Das iso-Tetraphosphan P[P(SiMe3)Me]2[P(SiMe3)2]

H ? C Bond Cleavage in Ferrocene by Organylruthenium Complexes Cp*(Me₃P)₂RuCH₂CMe₃ ( 1 ) reacts at 85°C with ferrocene ( 2 ) by cleavage of one H? C bond in 2 to give CpFe[η⁵-C₅H₄Ru(PMe₃)₂Cp*] ( 3 ) (Cp = η⁵-C₅H₅; Cp* = η⁵-C₅Me₅) and neopentane. The ruthenium atom in 3 has a distorted tetrahedral geometry, the planar Cp ligands in the ferrocenyl fragment are eclipsed. Solutions of 3 in [D₆]benzene or [D₈]THF exhibit H? D exchange of the ferrocenyl protons. In the [D₈]THF molecule only the α-deuterium atoms are exchanged. Reaction pathways for this exchange are discussed.     

Darstellung und Kristallstrukturen von Ag[N(CN)2](PPh3)2, Cu[N(CN)2](PPh3)2 und Ag[N(CN)2](PPh3)3

Preparation and Crystal Structures of Ag[N(CN)₂](PPh₃)₂, Cu[N(CN)₂](PPh₃)₂, and Ag[N(CN)₂](PPh₃)₃ The coordination compounds Ag[N(CN)₂](PPh₃)₂ ( 1 ), Cu[N(CN)₂](PPh₃)₂ ( 2 ), and Ag[N(CN)₂](PPh₃)₃ ( 3 ) are obtained by the reaction of AgN(CN)₂ or CuN(CN)₂ with triphenylphosphane in CH₂Cl₂. X‐ray structure determinations were performed on single crystals of 1 , 2 , and 3 · C₆H₅Cl. The three compounds crystallize monoclinic in the space group P2₁/n with the following unit cell parameters. 1 : a = 1216.07(9), b = 1299.5(2), c = 2148.4(3) pm, β = 99.689(13)°, Z = 4; 2 : a = 1369.22(10), b = 1257.29(5), c = 1888.04(15) pm, β = 94.395(7)°, Z = 4; 3 · C₆H₅Cl: a = 1276.6(4), b = 1971.7(3), c = 2141.3(5) pm, β = 98.50(3)°, Z = 4. In all structures the metal atoms have a distorted tetrahedral coordination. The crystal structure of 3 · C₆H₅Cl shows monomeric molecular units with terminal coordinated dicyanamide. The crystal structure of 1 is built up by dinuclear units, which are bridged by dicyanamide ligands. However, the crystal structure of 2 corresponds to a onedimensional coordination polymer, bridged by dicyanamide anions.     

Das P(SiMe2)3P

P(SiMe₂)₃P Li₃P (produced from the elements) forms with Me₂SiCl₂ at 20°C in toluene the bicyclic compound P(SiMe₂)₃P 4 beside small amounts of ClMe₂Si? P(SiMe₂)₂P? SiMe₂Cl and traces of P₄(SiMe₂)₆ 7. 4 can be transformed into 7 by thermal treatment. With the formation of 4 the existence of a bicyclic silylphosphane is confirmed which has already been mentioned in connection with P(SiEt₂)₃P [1], but could not be proven until now.     

Kristallstruktur des Zinkamids Zn[N(SiMe3)2]2

Crystal Structure of the Zinc Amide Zn[N(SiMe₃)₂]₂ X‐ray quality crystals of Zn[N(SiMe₃)₂]₂ (monoclinic, P2₁/c) are obtained by sublimation of the zinc amide Zn[N(SiMe₃)₂]₂ at —30 °C in vacuo (300 torr). According to the result of the X‐ray structural analysis, Zn[N(SiMe₃)₂]₂ contains an almost linear N‐Zn‐N unit with two short N‐Zn bonds.     

Synthesis of the (N2)3- radical from Y2+ and its protonolysis reactivity to form (N2H2)2- via the Y[N(SiMe3)2]3/KC8 reduction system

Examination of the Y[N(SiMe(3))(2)](3)/KC(8) reduction system that allowed isolation of the (N(2))(3-) radical has led to the first evidence of Y(2+) in solution. The deep-blue solutions obtained from Y[N(SiMe(3))(2)](3) and KC(8) in THF at -35 °C under argon have EPR spectra containing a doublet at g(iso) = 1.976 with a 110 G hyperfine coupling constant. The solutions react with N(2) to generate (N(2))(2-) and (N(2))(3-) complexes {[(Me(3)Si)(2)N](2)(THF)Y}(2)(μ-η(2):η(2)-N(2)) (1) and {[(Me(3)Si)(2)N](2)(THF)Y}(2)(μ-η(2):η(2)-N(2))[K(THF)(6)] (2), respectively, and demonstrate that the Y[N(SiMe(3))(2)](3)/KC(8) reaction can proceed through an Y(2+) intermediate. The reactivity of (N(2))(3-) radical with proton sources was probed for the first time for comparison with the (N(2))(2-) and (N(2))(4-) chemistry. Complex 2 reacts with [Et(3)NH][BPh(4)] to form {[(Me(3)Si)(2)N](2)(THF)Y}(2)(μ-N(2)H(2)), the first lanthanide (N(2)H(2))(2-) complex derived from dinitrogen, as well as 1 as a byproduct, consistent with radical disproportionation reactivity.     

Synthesis, isolation, and characterization of trisodium tricarbonyliridate (3-), Na3[Ir(CO)3]. Initial studies on its derivative chemistry and structural characterizations of trans-[Ir(CO)3(EPh3)2](-), E = Ge, Sn, and trans-[Co(CO)3(SnPh3)2](-1)

Reduction of Na[Ir(CO)4] by sodium metal in (Me2N)3PO, followed by treatment with liquid ammonia, provided high yields (ca. 90%) of unsolvated Na3[Ir(CO)3], a thermally stable, pyrophoric orange solid. This substance contains iridium in its lowest known formal oxidation state of -3 and has been characterized by IR spectroscopy, elemental analyses, and derivative chemistry, i.e., by its conversion to the triphenylgermyl and triphenylstannyl complexes, trans-[Ir(CO)3(EPh3)2](-), E = Ge, Sn. Single-crystal X-ray structures of the tetraethylammonium salts of these species, as well as [Co(CO)3(SnPh3)2](-), confirm the trigonal bipyramidal nature of the anions, originally predicted on the basis of their IR spectra in the carbonyl stretching frequency region. These structural characterizations provide important additional evidence for the presence of metal tricarbonyl units in Na3[M(CO)3], M = Co, Ir.     

Bildung und struktur der Cyclophosphane P4(CMe3)2[P(CMe3)2]2 und P4(SiMe3)2[P(CMe3)2]2

Formation and Structure of the Cyclophosphanes P₄(CMe₃)₂[P(CMe₃)₂]₂ and P₄(SiMe₃)₂[P(CMe₃)₂]₂ n-Triphosphanes showing a SiMe₃ and a Cl substituent at the atoms P¹ and P², like (Me₃C)₂P? P(SiMe₃)? P(CMe₃)Cl 3 or (Me₃C)₂P? P(Cl)? P(SiMe₃)₂ 4 are stable only at temperatures below ?30°C. Above this temperature these compounds lose Me₃SiCl, thus forming cyclotetraphosphanes, P₄(CMe₃)₂[P(CMe₃)₂]₂ 1 out of 3 , P₄(SiMe₃)₂[P(SiMe₃)₂]₂ 2a (cis) and 2b (trans) out of 4 . The formation of 1 proceeds via (Me₃C)₂P? P?PCMe₃ 5 as intermediate compound, which after addition to cyclopentadiene to give the Diels-Alder-adduct 6 (exo and endo isomers) was isolated. 6 generates 5 , which then forms the dimer compound 1 . Likewise (Me₃C)₂P? P?P-SiMe₃ 8 (as proven by the adduct 7 ) is formed out of 4 , leading to 2a (cis) and 2b (trans). Compound 1 is also formed out of the iso-tetraphosphane P[P(CMe₃)₂]₂[P(CMe₃)Cl] 9 , which loses P(CMe₃)₂Cl when warmed to a temperature of 20°C. 1 crystallizes monoclinically in the space group P2₁/a (no. 14); a = 1762.0(15) pm; b = 1687.2(18) pm; c = 1170.5(9) pm; β = 109.18(5)° and Z = 4 formula units in the elementary cell. The molecule possesses E conformation. The central four-membered ring is puckered (approx. symmetry 4 2m; dihedral angle 47.4°), thus bringing the substituents into a quasi equatorial position and the nonbonding electron pairs into a quasi axial position. The bond lengths in the four-membered ring of 1 (d (P? P) = 222.9 pm) are only slightly longer than the exocyclic bonds (221.8 pm). The endocyclic bond angles \documentclass{article}\pagestyle{empty}\begin{document}$ \bar \beta $\end{document}(P/P/P) are 85.0°, the torsion angles are ±33° and d (P? C) = 189.7 pm.     

自由基C59N及双体(C59N)2的理论研究

用INDO系列方法对自由基C59N及双体(C59N)2进行了理论研究,结果表明: N的掺入使C60笼发生畸变, N向笼外突出, 碳氮6-6键上的C自旋密度较大, 两C59N自由基在这个碳上以C-C单键连接形成双体为C2h, C2v对称性。其中C2v构型更稳定, 且N与附近的三个碳均以单键连接。理论计算的电子光谱与实验吻合较好。(C59N)2易分解为单体C59N。     

Preparation and Characterization of Halogen-Boron-Phosphorus Compounds. X-ray Crystal Structures of X(3)B.P(SiMe(3))(3) and [X(2)BP(SiMe(3))(2)](2) (X = Cl, Br)

The 1:1 mole ratio reactions of boron trihalides (BX(3)) with tris(trimethylsilyl)phosphine [P(SiMe(3))(3)] produced 1:1 Lewis acid/base adducts [X(3)B.P(SiMe(3))(3), X = Cl (1), Br (2), I (5)]. Analogous 1:1 mole ratio reactions of these boron trihalides with lithium bis(trimethylsilyl)phosphide [LiP(SiMe(3))(2)] produced dimeric boron-phosphorus ring compounds {[X(2)BP(SiMe(3))(2)](2), X = Br (3), Cl (4)}. X-ray crystallographic studies were successfully conducted on compounds 1-4. Compound 1 crystallized in the orthorhombic space group Pbca, with a = 13.420(3) ?, b = 17.044(5) ?, c = 21.731(7) ?, V = 4970.6(25) ?(3), and D(calc) = 1.229 g cm(-3) for Z = 8; the B-P bond length was 2.022(9) ?, Compound 2 crystallized in the orthorhombic space group Pbca, with a = 13.581(6) ?, b = 17.106(7) ?, c = 22.021(9) ?, V = 5116(4) ?(3), and D(calc) = 1.540 g cm(-3) for Z = 8; the B-P bond length was 2.00(2) ?. Compound 3 crystallized in the monoclinic space group P2(1)/n, with a = 9.063(5) ?, b = 16.391(8) ?, c = 9.331(4) ?, V = 1379.2(12) ?(3), and D(calc) = 1.676 g cm(-3) for Z = 2; the B-P bond length was 2.023(10) ?. Compound 4 crystallized in the monoclinic space group P2(1)/n, with a = 9.143(5) ?, b = 16.021(8) ?, c = 9.170(4) ?, V = 1342.2(11) ?(3), and D(calc) = 1.282 g cm(-3) for Z = 2; the B-P bond length was 2.025(3) ?. Thermal decomposition studies were performed on compounds 1-4, yielding colored powders with boron:phosphorus ratios greater than 1:1 and significant C and H contamination indicated by elemental analyses.     

Bildung von NH4[Hg3(NH)2](NO3)3 und Umwandlung in [Hg2N](NO3)

Formation of NH₄[Hg₃(NH)₂](NO₃)₃ and Transformation to [Hg₂N](NO₃) NH₄[Hg₃(NH)₂](NO₃)₃ ( 1 ) and [Hg₂N](NO₃) ( 2 ) are obtained from conc. aqueous ammonia solutions of Hg(NO₃)₂ at ambient temperature and under hydrothermal conditions at 180 °C, respectively, as colourless and dark yellow to light brown single crystals. The crystal structures {NH₄[Hg₃(NH)₂](NO₃)₃: cubic, P4₁32, a = 1030.4(2) pm, Z = 4, R_all = 0.028; [Hg₂N](NO₃): tetra gonal, P4₃2₁2, a = 1540.4(1), c = 909.8(1) pm, Z = 4, R_all = 0.054} have been determined from single crystal data. Both exhibit network type structures in which [HNHg₃] and [NHg₄] tetrahedra of the partial structures of 1 and 2 are connected via three and four vertices, respectively. 1 transforms at about 270 °C in a straightforward reaction to 2 whereby the decomposition products of NH₄NO₃ are set free. 2 decomposes at about 380 °C forming yellow HgO. Most certainly, 1 is identical with a mineral previously analyzed as “Hg(NH₂)(NO₃)” with the same Hg:N:O ratio.     

A mechanistic study of the samarium(II)-mediated reduction of aryl nitro compounds to the corresponding crylamines. The crystal structures of [Sm[N(SiMe(3))(2)](2)(thf)](2)(mu(2)-O) and [(Me(3)Si)(2)N](2)Sm(thf)(mu-PhNNPh)Sm[N(SiMe(3))(2)](2)

Treatment of nitrobenzene and other various nitroarenes with 6 equiv of samarium(II) under strictly anhydrous conditions allows for the isolation of aniline or the corresponding arylamine. Reducing the number of samarium(II) equivalents allows for the isolation of intermediate species, e.g., azoarenes or hydrazines. Use of Sm[N(SiMe(3))(2)](2), in place of the typically used SmI(2), has allowed for the detailed examination of the aqueous and nonaqueous species formed in this reduction and has been instrumental in delineation of the stepwise reaction mechanism. This is the first time that the reaction intermediates of an organic reaction mediated by samarium(II) have been isolated and analyzed by (1)H NMR and X-ray crystallography.     

Structural characterization of Pu[N(SiMe(3))(2)](3), a synthetically useful nonaqueous plutonium(III) precursor

A rare, and synthetically versatile, nonaqueous plutonium complex, Pu[N(SiMe3)2]3 (1), has been structurally characterized by single-crystal X-ray diffraction for the first time and reveals significantly shorter agostic interactions compared to the cerium(III) analogue, indicating possible covalency differences.     

Reaction of the silylene Si[(NCH2But)2C6H4-1,2] with the alkali metal silylamides M[N(SiMe3)R](M = Li, Na or K; R = SiMe3 or SiMe2Ph)

The thermally stable silylene Si[(NCH(2)Bu(t))(2)C(6)H(4)-1,2] 1 undergoes oxidative addition reactions with the alkali metal silylamides MN(SiMe(3))(2)(M = Li, Na or K) to afford the new alkali metal amides MN(SiMe(3))[(1)SiMe(3)][M = Li (2), Na (3) or K (4)]. Reaction of two equivalents of 1 with LiN(R)(SiMe(3)) leads in a two-step process to the compound LiN[(1)R][(1)SiMe(3)][R = SiMe(2)Ph (5) or SiMe(3) (6)]. Alternatively, 1 reacts with 3 to afford NaN[(1)SiMe(3)](2) (7). The structures of 2-5 and are presented and the formation of 2-7 is discussed.