基于时间反转理论的聚焦Lamb波结构损伤成像

从理论和实验上研究了时间反转法在频散和多模式的Lamb波结构健康检测方面的应用.当Lamb波在包含有损伤的板类结构中传播时,损伤的存在表现为一个被动波源.采用分布式传感器网络,基于传递函数的观点,通过推导由损伤这个被动波源产生的时间反转波场幅值的表达式,证实了当观察点位于损伤位置时,时间反转波场的幅值最大.为验证时间反转方法的聚焦效应,提出了一种适合于分布的激励/接收传感器网络的成像方法,该方法可以对损伤定位并近似确定损伤尺寸.结合有限元的实验结果显示了Lamb波检测信号的能量可在损伤处聚焦,表明时间反转     

A time reversal damage imaging method for structure health monitoring using Lamb waves

This paper investigates the Lamb wave imaging method combining time reversal for health monitoring of a metal-lic plate structure.The temporal focusing effect of the time reversal Lamb waves is investigated theoretically.It demonstrates that the focusing effect is related to the frequency dependency of the time reversal operation.Numerical simulations are conducted to study the time reversal behaviour of Lamb wave modes under broadband and narrowband excitations.The results show that the reconstructed time reversed wave exhibits close similarity to the reversed nar-rowband tone burst signal validating the theoretical model.To enhance the similarity,the cycle number of the excited signal should be increased.Experiments combining finite element model are then conducted to study the imaging method in the presence of damage like hole in the plate structure.In this work,the time reversal technique is used for the recompression of Lamb wave signals.Damage imaging results with time reversal using broadband and narrowband excitations are compared to those without time reversal.It suggests that the narrowband excitation combined time reversal can locate and determine the size of structural damage more precisely,but the cycle number of the excited signal should be chosen reasonably.     

Multiple-mode Lamb wave scattering simulations using 3D elastodynamic finite integration technique

We have implemented three-dimensional (3D) elastodynamic finite integration technique (EFIT) simulations to model Lamb wave scattering for two flaw-types in an aircraft-grade aluminum plate, a rounded rectangle flat-bottom hole and a disbond of the same shape. The plate thickness and flaws explored in this work include frequency-thickness regions where several Lamb wave modes exist and sometimes overlap in phase and/or group velocity. For the case of the flat-bottom hole the depth was incrementally increased to explore progressive changes in multiple-mode Lamb wave scattering due to the damage. The flat-bottom hole simulation results have been compared to experimental data and are shown to provide key insight for this well-defined experimental case by explaining unexpected results in experimental waveforms. For the rounded rectangle disbond flaw, which would be difficult to implement experimentally, we found that Lamb wave behavior differed significantly from the flat-bottom hole flaw. Most of the literature in this field is restricted to low frequency-thickness regions due to difficulties in interpreting data when multiple modes exist. We found that benchmarked 3D EFIT simulations can yield an understanding of scattering behavior for these higher frequency-thickness regions and in cases that would be difficult to set up experimentally. Additionally, our results show that 2D simulations would not have been sufficient for modeling the complicated scattering that occurred.     

一种定征固体板表面性质的兰姆波方法

基于Ritec-SNAP系统建立了兰姆波实验系统，分析了用兰姆波幅频特性定征固体板表面性质的可行性。实验结果表明，用高阶、多模兰姆波的幅频特性可准确定征固体板表面性质的变化。     

各向同性板中盲孔缺陷的兰姆波拓扑成像

将拓扑成像用于各向同性板中盲孔缺陷的兰姆波检测。由于缺陷关于板中面是非对称的,兰姆波模式转换的影响不能忽略。成像方法是基于无缺陷参考媒质中两个超声场(直接声场和伴随声场)的计算。以传感器激励信号为声源,计算直接声场;以盲孔引起的兰姆波散射信号为声源,计算伴随声场。拓扑成像通过直接声场与伴随声场的相乘,可消除无缺陷处多模式混叠的干扰,提高成像分辨率。建立有限元模型,通过不同时刻的瞬态声场图可视化地显示多模式兰姆波在缺陷处的聚焦过程,揭示拓扑成像方法的物理机理。数值结果表明,相对于经典的延迟求和以及时间反转方法,拓扑成像对盲孔缺陷有更强的适应能力。即使对于复杂的包含模式转换的兰姆波信号,拓扑图像的质量依然没有受到影响。文中提出的成像方法对板类结构中非对称缺陷的兰姆波检测具有一定的应用潜力。     

Corrosion and erosion monitoring in plates and pipes using constant group velocity Lamb wave inspection

Recent improvements in tomographic reconstruction techniques generated a renewed interest in short-range ultrasonic guided wave inspection for real-time monitoring of internal corrosion and erosion in pipes and other plate-like structures. Emerging evidence suggests that in most cases the fundamental asymmetric A₀ mode holds a distinct advantage over the earlier market leader fundamental symmetric S₀ mode. Most existing A₀ mode inspections operate at relatively low inspection frequencies where the mode is highly dispersive therefore very sensitive to variations in wall thickness. This paper examines the potential advantages of increasing the inspection frequency to the so-called constant group velocity (CGV) point where the group velocity remains essentially constant over a wide range of wall thickness variation, but the phase velocity is still dispersive enough to allow accurate wall thickness assessment from phase angle measurements. This paper shows that in the CGV region the crucial issue of temperature correction becomes especially simple, which is particularly beneficial when higher-order helical modes are also exploited for tomography. One disadvantage of working at such relatively high inspection frequency is that, as the slower A₀ mode becomes faster and less dispersive, the competing faster S₀ mode becomes slower and more dispersive. At higher inspection frequencies these modes cannot be separated any longer based on their vibration polarization only, which is mostly tangential for the S₀ mode while mostly normal for the A₀ at low frequencies, as the two modes become more similar as the frequency increases. Therefore, we propose a novel method for suppressing the unwanted S₀ mode based on the Poisson effect of the material by optimizing the angle of inclination of the equivalent transduction force of the Electromagnetic Acoustic Transducers (EMATs) used for generation and detection purposes.     

Ultrasonic Lamb wave method for sizing of spot welds

Two spot-welded thin sheets can be treated as two elastic waveguides coupled by a small common welded region. It is proposed to use Lamb waves to evaluate the quality of the weld. The feasibility of selecting the working frequency and mode number of the Lamb wave so that no resonance of the elastic vibrations appears in the weld region is considered analytically. This condition ensures a one-to-one correspondence between the mean diameter of the spot-weld region and the coefficient of transmission of the Lamb waves through it.A simple technique is suggested for determining the transmission coefficient and the scattering patterns of Lamb waves at the weld region. Experiments indicate that, to a satisfactory approximation, the wave transmission coefficient is proportional to the cube of the weld diameter. This allows a unique determination of the dimension of the welded region on the basis of the amplitude of the transmitted signal.     

利用扩散场信息的超声兰姆波全聚焦成像

利用兰姆波的扩散场信号,实现了距离传感器较近缺陷的全聚焦成像.通过两传感器接收的扩散场全矩阵信号进行互相关,恢复出两传感器之间的格林函数响应,重建新的全矩阵.该重建全矩阵削弱了直接耦合采集响应信号中存在的早期饱和非线性效应信号,恢复了被遮盖的近距离缺陷散射信号.在含缺陷的各向同性铝板中激发兰姆波,重建信号的早期信息与直接俘获信号的后期信息相结合形成混合全矩阵,结合全聚焦成像,优化成像效果.所提方法为薄板类结构中距离传感器较近缺陷的兰姆波无损检测提供了理论指导.     

衍射增强计算机断层技术研究

对衍射增强计算机断层技术进行了分析研究，提出了一种新方法.应用该方法只需在摇摆曲线一点处对物体进行360°范围内旋转投影成像，即可获得物体的折射率梯度分布以及吸收系数与散射系数和分布.该方法较以前的方法，大大简化了实验步骤. 关键词： 同步辐射 衍射增强 计算机断层     

Tomographic reconstruction of damage images in hollow cylinders using Lamb waves

Lamb wave tomography (LWT) is a potential and efficient technique for non-destructive tomographic reconstruction of damage images in structural components or materials. A two-stage inverse algorithm proposed by the authors for quickly reconstructing the damage images was applied to hollow cylinders. An aluminum hollow cylinder with an internal surface pit and a Carbon Fiber Reinforced Plastic (CFRP) laminated hollow cylinder with an artificial internal surface damage were used to validate the proposed method. The results show that the present method is capable of successfully reconstructing the images of the above damages in a larger inspection area with much less experimental data compared to some conventional ultrasonic tomography techniques.     

Thickness measurement in composite materials using Lamb waves

Pulse propagation in plate elements is investigated with the identification of Lamb modes in the range 40–150 kHz. The possibilities of the application of this technique in the measurement of thickness in composites and coarse materials are evaluated, particularly in ferrocement materials.     

板状结构Lamb波频散补偿与聚焦接收成像检测

对板状结构中Lamb波的频散和多模现象进行了理论分析,采用有限元仿真方法获取了Lamb波与缺陷作用后的回波信号,对信号进行聚焦接收处理,即在一定距离范围内利用导波频散特性对各个模式信号进行频散补偿,提取补偿后信号的幅值,结果表明当所得信号幅值最大时,所对应的补偿距离等于缺陷与换能器之间的实际距离.利用这一结论,提出了以...     

Microcrack localization using a collinear Lamb wave frequency-mixing technique in a thin plate

A novel Lamb wave frequency-mixing technique is proposed for locating microcracks in a thin plate,which does not require the resonance condition of Lamb wave mixing and can accurately locate the microcracks through only one-time sensing.Based on the bilinear stress-strain constitutive model,a two-dimensional finite element(FE)model is built to investigate the frequency-mixing response induced by the interaction between two primary Lamb waves and a microcrack.When two primary Lamb waves of A0 and S0 modes with different frequencies excited on the same side of the plate simultaneously impinge on the examined microcrack,under the modulation of the contact acoustic nonlinearity,the microcrack itself can be deemed as the secondary sound source and it will radiate the Lamb waves of new combined frequencies.Based on the time of flight of the generated A0 mode at difference frequency,an indicator named normalized amplitude index(NAI)is defined to directly locate the multi-microcracks in the given plate.It is found that the number and location of the microcracks can be intuitively visualized by using the NAI based frequency-mixing technique.It is also demonstrated that the proposed frequency mixing technique is a promising approach for the microcrack localization.     

Acoustic wave diffraction in reflective groove structures

A reflective groove structure is a component part of an acoustic surface wave resonator. The diffraction effects in this structure are the subject of this paper. Reflective groove structures are characterized by a concentration of acoustic wave energy, and losses due to diffraction are small.     

An oscillator using high order Lamb wave modes

An oscillator using high order Lamb wave modes is presented. Due to the multimode property of Lamb waves, high frequency oscillators using high order mode Lamb waves can be fabricated. To select the operating mode of the Lamb wave oscillator, a high order mode selector is inserted into the feedback loop. An oscillator using the 13th antisymmetric mode (a₁₃) in Lamb wave is achieved in experiments and the oscillating frequency is 5.30 times higher than that of the a₀ mode excited by the interdigital transducer.     

Lamb波多特征参数的复合材料损伤程度 评估方法*

航空航天飞行器、风电等工程机械结构的安全性保障至关重要,复合材料等新材料的大量应用,进一步提升了对结构健康监测的难度和要求。裂纹、脱层等复合材料结构典型损伤形成机理复杂、易扩展,损伤程度累积严重时会造成结构的突然失效。面向复合材料结构的损伤监测与诊断,现有的方法大多很难实现对结构损伤程度的跟踪评估,进而无法对结构的安全性评价提供依据。采用Lamb波监测理论,基于其传播距离远、对小损伤敏感等特点,通过研究分析典型损伤对Lamb波结构响应信号传播的多个特征作用过程和机理,采用多尺度分析,提取结构损伤时频域多特征参数;借助于神经网络的非线性映射能力,构建多特征复合材料结构损伤程度评估模型,实现对不同程度下典型结构损伤的评估。在环氧玻璃纤维复合材料板结构上的实验验证结果表明：提取的Lamb波时频域多特征参数,对不同程度典型损伤有一定的敏感性,所构建的损伤程度评估系统可以较为有效的实现损伤的程度估计。     

基于模式分离的兰姆波逆时偏移成像

应用频率域逆时偏移方法实现各向同性和各向异性板中缺陷的兰姆波成像.由于缺陷引起的多模态散射信号会在重建图像中形成伪像,根据基本导波模式振动对称性的差别进行了模式分离预处理.基于多元阵列超声技术,开展了铝板和复合板内缺陷频率域逆时偏移超声成像方法的数值仿真研究.首先,建立有限元模型,采用环形传感器数值采集由缺陷引起的兰姆波散射信号,然后,将采集到的多模式散射信号进行模式分离处理,再将模式分离后的兰姆波散射信号经时间反转后并在相应的接收器处重新激励,在频域中运用格林函数反向传播兰姆波散射信号,获取监测区域的声场信息,与正向传播声场进行互相关,重建缺陷图像.首先对铝板中单缺陷以及复合材料板中相邻的两个相同缺陷进行数值仿真,对比有无模式分离处理的缺陷逆时偏移成像效果,体现出模式分离的重要性.在此基础上,采用逆时偏移方法对复合板材内位置邻近、深度不同的双缺陷进行识别.数值结果表明,模式分离预处理后的缺陷重建图像能够有效去除多模式干扰产生的伪像.文中提出的成像方法对各向同性板和各向异性板内缺陷的检测和成像具有很好的发展潜力,可以准确地探测多个缺陷的形状、尺寸和深度.     

Application of tomography method in millimeter wavelengths band I. Theoretical

Tomographic methods of image reconstruction of two-dimensional cross-sections of volumetric objects in millimeter wavelengths band are suggested and considered. It is shown that in the frequency band under consideration, the images of investigated objects may be obtained by first-order diffraction tomography method (Born, Rytov or high frequency approximation of the first-order for scattered electromagnetic field).     

多通道超声兰姆波检测板状结构中的裂纹

超声兰姆(Lamb)波在结构缺陷检测方面愈来愈受到重视,但目前Lamb波的应用局限于单信号源激励,单通道接收的方法,容易受到噪声干扰,其后续的信号分析处理也比较复杂。本文旨在采用多通道Lamb波对板状结构中的裂纹进行定量分析与诊断。在铝板的表面凿刻出不同深度的凹槽作为裂纹,通过线阵换能器采集在一定传播距离内的多通道Lamb波信号,并采用二维傅里叶变换分析在不同深度的裂纹下,Lamb波模式能量的变化规律。结果表明,相对于完好铝板中的Lamb波信号,裂纹的存在会使Lamb波发生模式转换现象,并且转换模式能量百分比随裂纹深度的增加而线性增加。其结果为Lamb波评价板状结构中的裂纹状况提供了一种可能的方法。     

Liquid level sensor using ultrasonic Lamb waves

This paper describes a novel, noninvasive method for measurement of liquid level in closed metal tanks that are under high pressure. It is based on the use of ultrasonic Lamb waves propagating along the tank wall. Contact with liquid substantially changes the characteristics of these waves and this can be used as an indicator of liquid presence. Theoretical analysis shows that the symmetric and antisymmetric Lamb wave modes, both fundamental and higher order, are sensitive to presence of the liquid. The optimal wave frequency depends on the thickness of the tank wall and wall material. A prototype level sensor based on this principle has been developed. It uses two pairs of wedge transducers to generate and detect Lamb waves propagating along the circumference of the gas tank. An operating frequency of 100 kHz is found to be optimal for use with tanks having a wall thickness of 30-50 mm. Prototype sensors developed under this program have been used successfully in oil fields in the far northern region of Russia.