FeAl(B2) 合金La, Ac, Sc 和 Y 元素微合金化的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法, 研究了稀土元素(La, Ac, Sc 和 Y) 微合金化对FeAl (B2) 有序金属间化合物合金晶体结构、 弹性和电子性能的影响. 计算结果表明: 稀土元素Y 易于取代Fe位, 而Sc, La和Ac易于取代Al位, 其中Ac元素的加入使晶格点阵发生最大的变形. 弹性性能的计算表明La, Ac, Sc 和 Y 元素的加入可以改善FeAl (B2) 的塑性, 其中Fe₇Al₈Sc具有最好的塑性和硬度. 稀土元素对合金性能的影响, 主要是由于稀土原子的加入改变了Fe和Al电子之间的杂化作用. 计算结果与已有的试验结果和理论结果相一致.     

First-principles investigation of the effects of B impurities on the mechanical properties of NiAl intermetallics

We have investigated the effects of B impurities on the structure and mechanical properties of NiAl intermetallics by using a first-principles pseudopotential total-energy method, based on the density functional theory with a generalized gradient approximation. We found that the impurity B atoms can either replace Ni atoms or Al atoms or both, depending on the surrounding environment. We demonstrated that the presence of B will cause an increase in brittleness and a decrease in the ductility of NiAl for the...     

A first-principles study of B2 NiAl alloyed with rare earth elements Pr,Pm,Sm,and Eu

The structural,elastic,and electronic properties of NiAl alloyed with rare earth elements Pr,Pm,Sm,and Eu are investigated by using density functional theory(DFT).The study suggests that Pr,Pm,Sm,and Eu all tend to be substituted for an Al site.Ni8Al7Pm possesses the largest ductility.Only the hardness and ductility of Ni8Al7Eu are enhanced simultaneously.The covalency strength of the Ni-Al bond in Ni8Al7Pm is higher than that in Ni8Al7Eu.The covalency strength of an Al-Al bond and that of a Ni-Ni bond in Ni8Al7Eu are higher than that in Ni8Al7Pm.The Ni-Pm bond and the Ni-Eu bond are covalent,and the covalency strength of the Ni-Pm bond is greater.The Al-Pm bond and the Al-Eu bond show great covalency strength and ionicity,respectively.     

Structural,electronic and vibrational properties of ordered intermetallic alloys CoZ (Z = Al,Be, Sc and Zr) from first-principles total-energy calculations

Self-consistent band calculations on four intermetallic compounds of the CsCl structure are presented. The calculations were performed employing the self-consistent ultrasoft pseudopotential method based on the density functional theory, within the local density approximation and the generalized gradient approximation. The calculations predicted that the equilibrium lattice constants are in excellent agreement with the experiment for CoAl and are 1% smaller than experimental values for CoBe, CoSc and CoZr, respectively. In the present study, ordered CoAl do not show any magnetic moment, whereas the other three compounds have moderate magnetic moments of about 0.2 and 0.7 Bohr magnetons (μ_B ) per atom. The elastic constants are calculated using two approaches, the energy-strain method and the use of phonon dispersion curves. The values obtained from the two methods are in reasonable agreement for the studied intermetallic compounds CoZ (Z?=?Al, Be, Sc and Zr). The brittleness and ductility properties of CoZ (Z?=?Al, Be, Sc and Zr) are determined by Poisson’s ratio σ criterion and Pugh’s criterion. The calculated elastic constants satisfy the mechanical stability criterion and the ductility of CoZr and CoSc is predicted by Pugh’s criterion. The band structure and density of states, and phonon dispersion curves have been obtained and compared with the available experimental results as well as with existing theoretical calculations. We studied and discussed the position of Fermi level for the selected four intermetallic compounds.     

Theoretics-directed effect of copper or aluminum content on the ductility characteristics of Al-based(Al_3Ti,AlTi,AlCu,AlTiCu_2)intermetallic compounds

First-principle simulations have been applied to investigate the effect of copper(Cu) or aluminum(Al) content on the ductility of Al_3Ti,AlTi,AlCu,and AlTiCu_2 alloys.The mechanical stable and elastic properties of Al-based intermetallic compounds are researched by density functional theory with the generalized gradient approximation(DFT-GGA).The calculated lattice constants are in conformity with the previous experimental and theoretical data.The deduced elastic constants show that the investigated Al_3Ti,AlTi,AlCu,and AlTiCu_2 structures are mechanically stable.Shear modulus,Young's modulus,Poisson's ratio,and the ratio B/G have also been figured out by using reckoned elastic constants.A further analysis of Young's modulus and Poisson's ratio reveals that the third added element copper content has significant effects on the Al-Ti-based ICs ductile character.     

Electronic and thermodynamic and elastic properties of pyrite RuO2

This paper calculates the elastic,thermodynamic and electronic properties of pyrite (P a3ˉ) RuO2 by the plane-wave pseudopotential density functional theory (DFT) method.The lattice parameters,normalized elastic constants,Cauchy pressure,brittle–ductile relations,heat capacity and Debye temperature are successfully obtained.The Murnaghan equation of state shows that pyrite RuO2 is a potential superhard material.Internal coordinate parameter increases with pressure,which disagrees with experimental data.An analysis based on electronic structure and the pseudogap reveals that the bonding nature in RuO2 is a combination of covalent,ionic and metallic bonding.A study of the elastic properties indicates that the pyrite phase is isotropic under usual conditions.The relationship between brittleness and ductility shows that pyrite RuO2 behaves in a ductile matter at zero pressure and the degree of ductility increases with pressure.     

过渡金属氮化物中单原子固溶和力学性能的第一性原理研究

基于密度泛函理论(DFT)的第一性原理,计算Si原子在Ti族和V族氮化物中以及B、C和Ge原子在TiN晶体中固溶的稳定结构,讨论置换型和间隙型固溶的低能量稳定结构与晶体间距的关系,研究金属氮化物和固溶原子固溶结构的力学性能.结果表明:Si原子在TiN、ZrN、HfN和TaN晶体中固溶以及Ge原子在TiN晶体中固溶情况为,单原子不进入对应过渡金属氮化物晶体中形成间隙固溶或置换固溶,随着晶体间距离变化单原子可以在晶体之间形成间隙固溶或置换固溶;Si原子在NbN以及B原子在TiN晶体中可以实现间隙固溶,而不能形成置换固溶;Si原子在VN和C原子在TiN晶体中固溶结构形式均为置换固溶.单原子固溶形成低能量置换型固溶体和间隙型固溶体的弹性常数、体模量和剪切模量均低于原过渡金属氮化物的对应值.     

高温高压下立方氮化硼和六方氮化硼的结构、力学、热力学、电学以及光学性质的第一性原理研究

本文采用基于密度泛函理论的第一性原理平面波赝势和局域密度近似方法,优化了立方和六方氮化硼的几何结构,系统地研究了零温高压下立方和六方氮化硼的几何结构、力学、电学以及光学性质.结构与力学性质研究表明:立方氮化硼的结构更加稳定,两种结构的氮化硼均表现出一定的脆性,而六方氮化硼的热稳定性则相对较差;电学性质研究表明:立方氮化硼和六方氮化硼均为间接带隙半导体,且立方氮化硼比六方氮化硼局域性更强;光学性质结果显示:立方氮化硼和六方氮化硼对入射光的通过性都很好,在高能区立方氮化硼对入射光的表现更加敏感.此外,还研究了高温高压下立方氮化硼的热力学性质,并得到其热膨胀系数、热容、德拜温度和格林艾森系数随温度和压力的变化关系.本文的理论研究阐述了高压下立方氮化硼和六方氮化硼的相关性质,为今后的实验研究提供了比较可靠的理论依据.     

Band structure,Fermi surface,elastic,thermodynamic,and optical properties of AlZr_3,AlCu_3,and AlCu_2Zr:First-principles study

The electronic properties(Fermi surface,band structure,and density of states(DOS)) of Al-based alloys AlM_3(M=Zr and Cu) and AlCu_2Zr are investigated using the first-principles pseudopotential plane wave method within the generalized gradient approximation(GGA).The structural parameters and elastic constants are evaluated and compared with other available data.Also,the pressure dependences of mechanical properties of the compounds are studied.The temperature dependence of adiabatic bulk modulus,Debye temperature,specific heat,thermal expansion coefficient,entropy,and internal energy are all obtained for the first time through quasi-harmonic Debye model with phononic effects for T = 0 K-100 K.The parameters of optical properties(dielectric functions,refractive index,extinction coefficient,absorption spectrum,conductivity,energy-loss spectrum,and reflectivity) of the compounds are calculated and discussed for the first time.The reflectivities of the materials are quite high in the IR-visible-UV region up to ~ 15 eV,showing that they promise to be good coating materials to avoid solar heating.Some of the properties are also compared with those of the Al-based Ni_3 Al compound.     

用双粒子模型研究微量元素与Ni在Ni3Al晶界共富集现象

双粒子模型的基础是描述原子之间相互作用势为EAM(embedded atom method)势的Monte Carlo模拟. 模型建议：在Ni₃Al晶界弛豫时，微量元素原子既被看作为偏析子又被看作为诱发子. 作为偏析子它在晶界偏析(或富集)，作为诱发子它诱发Ni原子在晶界偏析(或富集). 可见本模型能解析共偏析(或共富集)现象. 根据正(或诱发子)效应与负(或偏析子)效应的联合影响，模型解释了Ni在Ni₃Al晶界最明显富集现象. 关键词： 偏析子与诱发子 基体效应 在晶界共富集 晶界内聚性     

The influence of 3d-metal alloy additions on the elastic and thermodynamic properties of CuPd3

Embedded-atom method （EAM） potentials are used to investigate the effects of alloying （e.g. 3d-metals） on the trends of elastic and thermodynamic properties for CuPd3 alloy. Our calculated lattice parameter, cohesive energy, and elastic constants of CuPd3 are consistent with the available experimental and theoretical data. The results of elastic constants indicate that all these alloys are mechanically stable. Further mechanical behavior analysis shows that the additions of Cr, Fe, Co, and Ni could improve the hardness of CuPd3 while V could well increase its ductility. Moreover, in order to evaluate the thermodynamic contribution of 3d-metals, the Debye temperature, phonon density of states, and vibrational entropy for CuMPd6 alloy are also investigated.     

Electronic structure,phase stability,and vibrational properties of Ir-based intermetallic compound IrX (X=Al,Sc, and Ga)

The phase stability and mechanical properties of B2 type IrX (X=Al, Sc and Ga) compounds are investigated. Self-consistenttotal-energy calculations in the framework of density functional theory using the Generalized Gradient Approximation (GGA) to determine the equations of state and the elastic constants of IrX (X=Al, Sc, and Ga) in the B2 phase have been performed. The calculations predicted the equilibrium lattice constants, which are about 1% greater than experiments for IrAl, 1.81% for IrGa, and 0.71% for IrSc compound. IrAl is shown to be the least compressible, and it is followed by IrGa and the IrSc compound. The phase stability of the studied compounds is checked. The brittleness and ductility properties of IrX (X=Al, Sc, and Ga) are determined by Poisson's ratio σ criterion and Pugh's criterion. IrGa compound is a ductile material; however, IrAl and IrSc show brittleness. The band structure and density of states (DOS), and phonon dispersion curves have been obtained and analyzed. The position of the Fermi level and the contribution of d electrons to the density of states near E_F is studied and discussed in detail. We also used the phonon density of states and quasiharmonic approximation to calculate and predict some thermodynamic properties such as constant-volume specific heat capacity of the B2 phase of IrX (X=Al, Sc and Ga) compounds.     

First-principles investigations on structural,elastic, electronic properties and Debye temperature of orthorhombic Ni3Ta under pressure

The structural, elastic, electronic properties and Debye temperature of Ni₃Ta under different pressures are investigated using the first-principles method based on density functional theory. Our calculated equilibrium lattice parameters at 0 GPa well agree with the experimental and previous theoretical results. The calculated negative formation enthalpies and elastic constants both indicate that Ni₃Ta is stable under different pressures. The bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν are calculated by the Voigt–Reuss–Hill method. The bigger ratio of B/G indicates Ni₃Ta is ductile and the pressure can improve the ductility of Ni₃Ta. In addition, the results of density of states and the charge density difference show that the stability of Ni₃Ta is improved by the increasing pressure. The Debye temperature Θ _D calculated from elastic modulus increases along with the pressure.     

Site preference of Ti and Nb in L12-ordered Co-Al-W phase and their effect on the properties of the alloy: first-principles study

In this work,the equilibrium structure,electronic and elastic properties of L1₂-ordered Co-Al-W and Co-Al-W-X(X=Ti and Nb)phase were calculated,using first-principles calculations.Among six nonequivalent sites(Al₁,Al₂,Co₃,Co₄,W₅,W₆),Ti and Nb prefer to occupy the W₆site,since the formation enthalpy of the system is lowest when Ti and Nb occupy the W。site.Both Ti and Nb most affect the density of states of Al atoms.Compared with the Al₂ site,which is the sub-preference site of Ti and Nb,the density of states of Al atoms is higher with the addition of Ti and Nb in the W₆site,which means that the latter system is more stable.According to the bulk modulus B,shear modulus G,Young's modulus E,hardness Hv and Poisson's ratioσ,for Co₃(AI,W)alloy,the addition of Ti and Nb in the W₆site decreases its hardness hut increases its duetility.This work cnnfirms that Ti and Nh can stahilize the Cag(Al,W)alloy and have a positive effect in solving the relatively poor ductility of this alloy,which has important implications for the development of cobalt.based alloys.     

Co、Ni和Ga合金化对DO_(19)-Ti_3Al弹性性能影响的第一性原理研究

采用第一性原理的方法研究了Co、Ni和Ga元素对DO_(19)-Ti_3Al晶体的弹性性能的影响,结果表明:Co和Ni原子倾向于置换Ti原子而Ga原子则更倾向于置换Al原子;Co和Ni元素固溶可以减弱晶体内部电子杂化效应从而增大Ti_3Al晶体的本征塑性,其中Co元素的对晶体的本征塑性的增大效果显著;Ga元素固溶后Ti_3Al晶体的强度和硬度将得到提高.     

Al_xCrFeNiTi系高熵合金成分和弹性性质关系

为了探索Al_xCrFeNiTi系高熵合金组成成分和弹性性质的关系,结合固溶体特征参数和第一性原理计算,研究Al元素含量对Al_xCrFeNiTi (x=0, 0.5, 1, 2, 3, 4)合金结构和弹性性质的影响,并分析合金固溶体特征参数与弹性性质之间的关系.结果表明:Al_xCrFeNiTi系合金的价电子浓度随着Al含量的增加逐渐减小,合金在体心立方结构下的形成焓均低于面心立方结构,说明研究的Al_xCrFeNiTi系合金会形成单一的体心立方结构固溶体;合金的晶格常数和形成能力强弱随着Al含量的增加而增大,但合金的结构稳定性略有下降;当合金元素按照等原子比进行成分配比时,合金的原子尺寸差异最大; Al_xCrFeNiTi系合金中不同原子之间除了金属键结合外,还表现出一定的共价和离子键结合特征;对于Al_xCrFeNiTi系合金而言,随着热力学熵焓比的增大,合金体弹模量和韧性随之增大;随着合金混合焓的增加,合金在压缩方向的各向异性程度明显降低.热力学熵焓比和混合焓可作为Al_xCrFeNiTi系高熵合金成分设计的重要参数.     

Cr、Mn、Co、Ni掺杂对Al13Fe4相稳定性和力学性能影响的第一性原理研

采用基于密度泛函理论的第一性原理计算方法,系统地研究了不同掺杂浓度下过渡族元素Cr、Mn、Co、Ni在Al13Fe4相中的占位情况、结构稳定性和机械性能. 计算得到所有的Al13(Fe24-xMx) (M=Cr、Mn、Co、Ni;X=1,2,4)相都具有良好的热力学稳定性和机械稳定性. 相同掺杂浓度化合物的形成焓按如下顺序减小：Al78(Fe24-xCrx) > Al78(Fe24-xMnx) > Al13Fe4 > Al78(Fe24-xNix) > Al78(Fe24-xCox).形成焓的降低增加了Al13Fe4相成核驱动力,Co和Ni有利于促进Al-Fe合金中Al13Fe4相形核,细化Al13Fe4相. 过渡族元素可以改善金属间化合物的脆性,增强塑性变形能力. 并且随着掺杂浓度的增加,过渡族元素的加入对脆性的改善呈先增大后减小的趋势.     

金属纳米线弹性性能的尺寸效应及其内在机理的模拟研究

本文应用分子动力学(MD)方法和改进分析型嵌入原子模型(MAEAM)研究了Ni, Al和V纳米线的弹性性能尺寸效应及表面对其影响, 并计算了相应完整晶格材料的弹性性能. 结果表明本文计算完整晶格材料的弹性性能与已有实验和理论的结果相符合. 而计算所得各金属纳米线的体模量明显低于相应块体材料的结果, 且随纳米线的尺寸增加而呈指数增加, 并接近于常数. 在此基础上, 通过研究Ni, Al和V纳米线表面能的尺寸效应及其分布特征进一步探讨了自由表面在尺寸影响纳米线弹性性能过程中的作用及其内在机理.     

Ground-state properties of boron-doped diamond

Boron-doped diamond undergoes an insulator-metal or even a superconducting transition at some critical value of the dopant concentration. We study the equilibrium lattice parameter and bulk modulus of boron-doped diamond experimentally and in the framework of the density functional method for different levels of boron doping. We theoretically consider the possibility for the boron atoms to occupy both substitutional and interstitial positions and investigate their influence on the electronic structure of the material. The data suggest that boron softens the lattice, but softening due to substitutions of carbon with boron is much weaker than due to incorporation of boron into interstitial positions. Theoretical results obtained for substitution of carbon are in very good agreement with our experiment. We present a concentration dependence of the lattice parameter in boron-doped diamond, which can be used for to identify the levels of boron doping in future experiments. The text was submitted by the authors in English.