First-principles investigations on structural stability,mechanical, and thermodynamic properties of LaT_2Al_(20)(T = Ti,V,Cr,Nb,and Ta) intermetallic cage compounds

First principles calculations were used to explore the structural stability, mechanical properties, and thermodynamic properties of LaT_2 Al_(20)(T = Ti, V, Cr, Nb, and Ta) intermetallics. The calculated formation enthalpy and phonon frequencies indicate that LaT_2Al_(20) intermetallics exhibit the structural stability. The elastic moduli(B, G, E, and Hv) indicate that these intermetallics possess the better elastic properties than pure Al. The values of Poisson's ratio v and B/G demonstrate that LaT_2Al_(20) intermetallics are all brittle materials. The anisotropy of elasticity and Young's modulus(three-and two-dimensional figures) indicate that LaT_2Al_(20) compounds are anisotropic. Importantly, the calculated thermal quantities demonstrate that LaT_2Al_(20) intermetallics possess the better thermal physical properties than pure Al at high temperatures.     

First-principles study of the structural, elastic, electronic, optical, and vibrational properties of intermetallic Pd2Ga

The structural, elastic, electronic, optical, and vibrational properties of the orthorhombic Pd₂Ga compound are investigated using the norm-conserving pseudopotentials within the local density approximation in the frame of density functional theory. The calculated lattice parameters have been compared with the experimental values and found to be in good agreement with these results. The second-order elastic constants and the other relevant quantities, such as the Young's modulus, shear modulus, Poisson's ratio, anisotropy factor, sound velocity, and Debye temperature, have been calculated. It is shown that this compound is mechanically stable after analysing the calculated elastic constants. Furthermore, the real and imaginary parts of the dielectric function and the optical constants, such as the optical dielectric constant and the effective number of electrons per unit cell, are calculated and presented. The phonon dispersion curves are derived using the direct method. The present results demonstrate that this compound is dynamically stable.     

First-principles study on electronic structure and elastic properties of Ti2SC

We have performed first-principles study on electronic structure and elastic properties of Ti₂SC. The absence of band gap at the Fermi level and the finite value of the density of states at the Fermi energy reveal the metallic behavior of this compound. The five independent elastic constants were derived and the bulk modulus, Young's modulus, shear modulus, and Poisson's ratio were determined. The high bulk modulus and hardness was found to be originated from the strong Ti 3d-S 2p hybridization. Such strong MA bonding is unusual in the MAX phases studied so far. Ti₂SC is elastically stable and exhibits highly elastic isotropy.     

Ab initio calculations of the elastic, electronic, optical, and vibrational properties of PdGa compound under pressure

The structural, elastic, electronic, optical, and vibrational properties of cubic PdGa compound are investigated using the norm-conserving pseudopotentials within the local density approximation (LDA) in the framework of the density functional theory. The calculated lattice constant has been compared with the experimental value and has been found to be in good agreement with experimental data. The obtained electronic band structures show that PdGa compound has no band gap. The second-order elastic constants have been calculated, and the other related quantities such as the Young’s modulus, shear modulus, Poisson’s ratio, anisotropy factor, sound velocities, and Debye temperature have also been estimated. Our calculated results of elastic constants show that this compound is mechanically stable. Furthermore, the real and imaginary parts of the dielectric function and the optical constants such as the electron energy-loss function, the optical dielectric constant and the effective number of electrons per unit cell are calculated and presented in the study. The phonon dispersion curves are also derived using the direct method.     

用超声背向散射谱定征柱状固体的弹性常数

根据流体中圆柱固体对超声波的背向散射谱与固体弹性参数的密切关系,本提出了材料弹性参数测量的一种新方法－超声背向散射谱法;测量了铜合金杆和铝合金杆的超声背向散射谱,并反演得到了它们的杨氏模量和泊松比。和传统的静力学方法相比,超声背向散射法测得的数据较精确,且对被测材料不会造成任何损伤。     

Orientation dependence of elastic properties in orthorhombic Ca_3Mn_2O_7

Elastic properties are important in fundamental understanding of multiferroic materials. However, up to now, there is no work about anisotropy of elastic properties in orthorhombic Ca_3Mn_2O_7. In this study, using coordinate transformation method, we investigated basic elastic parameters(elastic constants c'_(ij)) and engineering elastic parameters(Young's modulus E, Poisson's ratio v, and the rigidity modulus G') of orthorhombic Ca_3Mn_2O_7 along arbitrary orientations. The detailed anisotropic characteristics of these parameters were presented. The results reveal the orientation related elastic properties in mm2 point group orthorhombic Ca_3Mn_2O_7.     

Structural and mechanical stability of rare-earth diborides

Structural and mechanical properties of several rare-earth diborides were systematically investigated by first principles calculations. Specifically, we studied XB2 , where X=Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, and Lu in the hexagonal AlB2 , ReB2 , and orthorhombic OsB2 -type structures. The lattice parameters, bulk modulus, bond distances, second order elastic constants, and related polycrystalline elastic moduli (e.g., shear modulus, Young’s modulus, Poisson’s ratio, Debye temperature, sound velocities) were calculated. Our results indicate that these compounds are mechanically stable in the considered structures, and according to "Chen’s method", the predicted Vickers hardness shows that they are hard materials in AlB2 - and OsB2 -type structures.     

Estimation of dynamic elastic constants from the amplitude and velocity of Rayleigh waves

In this paper a method is proposed to characterize the elasticity of isotropic linear materials from the generation and detection of an acoustic surface wave. For the calculation of the elastic constants, it is sufficient that only one of the faces of the sample be accessible. The methodology is based on both the measurement of the Rayleigh wave velocity and on the determination of the normal to longitudinal amplitude ratio calculated from the normal and longitudinal components of the displacement of a point. The detection of two consecutive surface wave pulses using a single experimental setup permits the determination of the elastic constants. The method is applied to calculate Young's modulus and Poisson's ratio of an aluminum sample as well as their systematic uncertainties. The results obtained give a relative uncertainty for Young's modulus on the order of the sixth part of that calculated for Poisson's ratio.     

L12型铝合金的结构、弹性和电子性质的第一性原理研究

运用第一性原理方法研究了L12型铝合金相Al3Sc和Al3Zr的晶体结构、电子结构和弹性.结合能和形成能的计算表明,两种合金具有较强的合金化能力,且Al3Zr较Al3Sc具有更强的结构稳定性.电子结构分析表明,费米能级以下较多的价电子数决定了Al3Zr具有较强的结构稳定性.计算并分析比较了两种合金相的单晶弹性常数(C11,C12和C44)以及多晶弹性模量(体弹性模量B、剪切模量G、杨氏模量Y、泊松比ν和各向异性因子A).通过对比实验和其他理论计算结果,进一步分析和解释了两种合金相的力学性质.     

Phase transition,elastic and electronic properties of topological insulator Sb_2Te_3 under pressure: First principle study

The phase transition, elastic and electronic properties of three phases(phase Ⅰ,Ⅱ, and Ⅲ) of Sb_2Te_3 are investigated by using the generalized gradient approximation(GGA) with the PBESOL exchange–correlation functional in the framework of density-functional theory. Some basic physical parameters, such as lattice constants, bulk modulus, shear modulus,Young's modulus, Poisson's ratio, acoustic velocity, and Debye temperature Θ are calculated. The obtained lattice parameters under various pressures are consistent with experimental data. Phase transition pressures are 9.4 GPa(Ⅰ→Ⅱ) and 14.1 GPa(Ⅱ→Ⅲ), which are in agreement with the experimental results. According to calculated elastic constants, we also discuss the ductile or brittle characters and elastic anisotropies of three phases. Phases Ⅰ and Ⅲ are brittle, while phaseⅡ is ductile. Of the three phases, phaseⅡ has the most serious degree of elastic anisotropy and phase Ⅲ has the slightest one.Finally, we investigate the partial densities of states(PDOSs) of three phases and find that the three phases possess some covalent features.     

First-Principles Calculations of Structural,Elastic and ElectronicProperties of Tetragonal HfO2under Pressure

Structural, elastic and electronic properties of tetragonal HfO₂ at applied hydrostatic pressure up to 50 GPa have been investigated using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory (DFT). The calculated ground-state properties are in good agreement with previous theoretical and experimental data. Six independent elastic constants of tetragonal HfO₂ have been calculated at zero pressure and high pressure. From the obtained elastic constants, the bulk, shear and Young's modulus, Poisson's coefficients, acoustic velocity and Debye temperature have been calculated at the applied pressure. Band structure shows that tetragonal HfO₂ is an indirect band gap. The variation of the gap versus pressure is well fitted to a quadratic function.     

Combining Brillouin spectroscopy and laser-SAW technique for elastic property characterization of thick DLC films

Surface Brillouin spectroscopy (SBS) has been widely used for elastic property characterization of thin films. For films thicker than 500 nm, however, the wavelength of surface acoustic wave in the frequency range available for SBS is smaller than film thickness, and the SBS measures only the Rayleigh wave of the film. The laser-SAW technique, on the other hand, measures only the low-frequency portion of the surface acoustic wave dispersion and can estimate only one elastic modulus of the film (typically Young's modulus). In this work, we have combined the two methods to determine both Young's modulus and Poisson's ratio of a diamond-like carbon (DLC) film. It was found that reasonable estimates can be obtained for the longitudinal wave velocity, shear wave velocity, and Young's modulus of the film. The Poisson's ratio, however, still has a relatively large measurement error.     

Structural,Elastic, and Electronic Properties of a New Phase of Carbon

Based on density function theory with the ultrasoft pseudopotential scheme in the frame of the local density approximation and the generalized gradient approximation, the structural, elastic, and electronic properties of carbon with P222₁ phase have been systematically studied in this paper. The calculated results show that the P222₁ phase of carbon is mechanically stable and dynamically stable at ambient pressure. The anisotropy studies of Young's modulus, Poisson's ratio, shear anisotropic factor, the percentage of elastic anisotropy for bulk modulus, the percentage of elastic anisotropy for shear modulus and the universal anisotropic index show that P222₁ phase of carbon exhibits anisotropy. In addition, P222₁ phase is an indirect semiconductor with bandgap of 3.423 eV. But, the band gap of P222₁ phase for carbon increase with increasing pressure.     

Phase transition, elastic, thermodynamic properties of zinc-blend BeSe from first-principles

The structural phase transition, elastic, thermodynamics properties of BeSe in zinc-blende were investigated by performing first-principles calculations within generalized gradient approximation. The phase transition pressure P_t between the B3 phase and the B8 phase of BeSe was determined. The pressure dependencies of elastic constants, shear modulus, Young's modulus, and Poisson's ratio of BeSe are calculated. The thermodynamic properties of the zinc-blende structure BeSe are calculated by using the quasi-harmonic Debye model. The pressure and temperature dependencies of the heat capacity and the thermal expansion coefficient, as well as the Grüneisen parameter are investigated systematically in the ranges of 0–50 GPa and 0–1200 K.     

Elastic properties and electronic structures of lanthanide hexaborides

The structural, elastic, and electronic properties of a series of lanthanide hexaborides(Ln B6) have been investigated by performing ab initio calculations based on the density functional theory using the Vienna ab initio simulation package.The calculated lattice and elastic constants of Ln B6 are in good agreement with the available experimental data and other theoretical results. The polycrystalline Young's modulus, shear modulus, the ratio of bulk to shear modulus B/G, Poisson's ratios, Zener anisotropy factors, as well as the Debye temperature are calculated, and all of the properties display some regularity with increasing atomic number of lanthanide atoms, whereas anomalies are observed for Eu B6 and Yb B6. In addition, detailed electronic structure calculations are carried out to shed light on the peculiar elastic properties of Ln B6.The total density of states demonstrates the existence of a pseudogap and indicates lower structure stability of Eu B6 and Yb B6 compared with others.     

First-principles calculations of structural, elastic, electronic and optical properties of the antiperovskite AsNMg3

The density functional theory (DFT) calculations of structural, elastic, electronic and optical properties of the cubic antiperovskite AsNMg₃ has been reported using the pseudo-potential plane wave method (PP-PW) within the generalized gradient approximation (GGA). The equilibrium lattice, bulk modulus and its pressure derivative have been determined. The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk and shear moduli, Young's modulus and Poisson's ratio for ideal polycrystalline AsNMg₃ aggregate. We estimated the Debye temperature of AsNMg₃ from the average sound velocity. This is the first quantitative theoretical prediction of the elastic properties of AsNMg₃ compound, and it still awaits experimental confirmation. Band structure, density of states and pressure coefficients of energy gaps are also given. The fundamental band gap (Γ-Γ) initially increases up to 4 GPa and then decreases as a function of pressure. Furthermore, the dielectric function, optical reflectivity, refractive index, extinction coefficient, and electron energy loss are calculated for radiation up to 30 eV. The all results are compared with the available theoretical and experimental data.     

First-principles calculations of elastic and thermo-physical properties of Al, Mg and rare earth lanthanide elements

The elastic constants of the Al, Mg and rare earth (RE) lanthanide elements have been calculated at T=0 K by using the projector augmented-wave (PAW) method within the generalized gradient approximation (GGA). The bulk moduli, shear moduli, Young's moduli and Poisson's ratio of poly-crystalline solid are estimated from the calculated elastic constants of single crystal. Based on the quasi-harmonic Debye model, the Debye temperature, heat capacity, Grüneisen parameter and linear thermal expansion coefficient are also estimated. The present calculated results are in reasonable agreement with the available experimental data and other theoretical results. The present calculation of elastic constants for Ce also indicates that the PAW potential (named “Ce_3”), for which one f electron is kept frozen in the core and hence fix the valency of Ce to three (Ce_3) does not yield good results for the elastic constants.     

硅酸镁钙钛矿弹性及热力学特性的第一性原理计算

基于密度泛函理论的第一性原理计算,结合准谐德拜模型研究了高压下硅酸镁钙钛矿的弹性及热力学特性. 计算得到的物态方程数据、热容、热膨胀系数等在宽广的温度和压力范围与实验结果及其他理论计算结果吻合. 根据有限应变理论计算了硅酸镁钙钛矿的弹性常数,并讨论了杨氏模量、泊松比、德拜温度、晶体各向异性随压力的变化.     

The structural, electronic, elastic and optical properties of AlCu(Se1−xTex)2 compounds from first-principle calculations

The structural, electronic structure, elastic and optical properties of the AlCu(Se_1−xTe_x)₂ compounds have been investigated by using a first-principles method based on density functional theory. The lattice constants of the quaternary compounds AlCu(Se_1−xTe_x)₂ increase with the increasing of Te composition. The calculated lattice constants for the ternary compounds i.e. AlCuSe₂ and AlCuTe₂ are in good agreement with the experimental data. The band structures show that the compounds have direct band gap and the band gaps are found to vary nonlinearly with composition. The total and part density of states of the quaternary AlCu(Se_1−xTe_x)₂ compounds are discussed. The calculated elastic constants indicate that all of the AlCu(Se_1−xTe_x)₂ compounds are mechanically stable. The bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν can be obtained by using the Voigt-Reuss-Hill averaging scheme. The B/G ratios of the AlCu(Se_1−xTe_x)₂ compounds indicate that AlCu(Se_0.8Te_0.2)₂ is ductile and the others are brittle. The Debye temperature of the AlCu(Se_1−xTe_x)₂ compounds decreases a little with increasing Te content except the compound with x = 0.4. The dielectric functions, refractive index, extinction coefficient, absorption spectrums and energy-loss function of the AlCuSe₂ and AlCuTe₂ are also calculated and discussed in this work.