First-principles investigation of structural,elastic, electronic and magnetic properties of Be0.75Co0.25Y (YS,Se and Te) compounds

We have theoretically investigated the structural, elastic, electronic and magnetic properties of Be_0.75Co_0.25Y (YS, Se and Te) alloys, in their zinc-blend phase. This study is carried out by using the full-potential augmented plane wave plus local orbitals method within the density functional theory. Foe computing the exchange-correlation potential, the Wu and Cohen generalized gradient approximation is employed to calculate structural and elastic properties whereas the modified Becke and Johnson potential local density approximation is utilized to examine electronic and magnetic properties. By minimizing the total energy in paramagnetic (PM) and ferromagnetic (FM) phases, it is found the studied compounds are stable in FM structure. The mechanical behavior of the studied compounds is reported with the calculation of shear modulus, Young's modulus, and Poisson's ratio provides. Such mechanical aspects might be useful for the experimentalists to study the mechanical properties upon alloying BeY compounds with Co. We also compute electronic structures, density of states (total and partial), pd-exchange splitting and magnetic moments. Moreover, bond nature is studied by estimating the spin polarized charge densities of Be_0.75Co_0.25Y (YS, Se and Te).     

An Improved Study of Electronic Band Structure and Optical Parameters of X-Phosphides (X=B,Al, Ga,In) by Modified Becke-Johnson Potential

We report the electronic band structure and optical parameters of X-Phosphides (X=B, Al,Ga,In) by first-principles technique based on a new approximation known as modified Becke-Johnson (mBJ). This potential is considered more accurate in elaborating excited states properties of insulators and semiconductors as compared to LDA and GGA. The present calculated band gaps values of BP, AlP, GaP, and InP are 1.867 eV, 2.268 eV, 2.090 eV, and 1.377 eV respectively, which are in close agreement to the experimental results. The band gap values trend in this study is as: Eg (mBJ-GGA/LDA)Eg (GGA) Eg (LDA). Optical parametric quantities (dielectric constant, refractive index, reflectivity and optical conductivity) which based on the band structure are also presented and discussed. BP, AlP, GaP, and InP have strong absorption in between the energy range 4-9eV, 4-7eV, 3-7eV, and 2-7eV respectively. Static dielectric constant, static refractive index and coefficient of reflectivity at zero frequency, within mBJ-GGA, are also calculated. BP, AlP, GaP, and InP show significant optical conductivity in the range 5.2-10eV, 4.3-8eV, 3.5-7.2eV, and 3.2-8eV respectively. The present study endorses that the said compounds can be used in opto-electronic applications, for different energy ranges.     

An Improved Study of Electronic Band Structure and Optical Parameters of X-Phosphides (X=B,Al, Ga,In) by Modified Becke-Johnson Potential

We report the electronic band structure and optical parameters of X-Phosphides (X=B, Al, Ga, In) by first-principles technique based on a new approximation known as modified Becke-Johnson (mBJ). This potential is considered more accurate in elaborating excited states properties of insulators and semiconductors as compared to LDA and GGA. The present calculated band gaps values of BP, AlP, GaP, and InP are 1.867 eV, 2.268 eV, 2.090 eV, and 1.377 eV respectively, which are in close agreement to the experimental results. The band gap values trend in this study is as: E_g(mBJ-GGA/LDA) > E_g(GGA) > E_g(LDA). Optical parametric quantities (dielectric constant, refractive index, reflectivity and optical conductivity) which based on the band structure are also presented and discussed. BP, AlP, GaP, and InP have strong absorption in between the energy range 4-9 eV, 4-7 eV, 3-7 eV, and 2-7 eV respectively. Static dielectric constant, static refractive index and coefficient of reflectivity at zero frequency, within mBJ-GGA, are also calculated. BP, AlP, GaP, and InP show significant optical conductivity in the range 5.2-10 eV, 4.3-8 eV, 3.5-7.2 eV, and 3.2-8 eV respectively. The present study endorses that the said compounds can be used in opto-electronic applications, for different energy ranges.     

第一性原理计算MAlH4(M=Na,K)的结构和弹性性质

基于密度泛函理论研究并比较了两种储氢材料NaAlH₄和KAlH₄的晶格参数,弹性性质和电子结构.计算结果表明NaAlH₄和KAlH₄都是绝缘体,Al—H之间是共价键,M(M=Na,K)与AlH₄之间是离子键.NaAlH₄和KAlH₄的弹性常数都比较小而且NaAlH₄的弹性常数要大于KAlH₄的弹性常数,对此给予了解释. 关键词： 配位金属氢化物 电子结构 弹性性质     

Spin-polarized calculations of electronic structures in ferromagnetic and antiferromagnetic Zn0.75TM0.25Se (TM=Cr,Fe, Co and Ni)

In this work, we aim to examine the spin-polarized electronic band structures, the local densities of states as well as the magnetism of Zn_1−xTM_xSe (TM=Cr, Fe, Co and Ni) diluted magnetic semiconductors in the ferromagnetic (FM) and antiferromagnetic (AFM) phases, and with 25% of TM. The calculations are performed by the developed full-potential augmented plane wave plus local orbitals method within the spin density functional theory. As exchange-correlation potential we used the generalized gradient approximation (GGA) form. We treated the ferromagnetic and antiferromagnetic phases and we found that all compounds are stable in the ferromagnetic structure. Structural properties are computed after total energy minimization. Our results show that the cohesive energies of Zn_0.75TM_0.25Se are greater than that of zinc blende ZnSe. We discuss the electronic structures, total and partial densities of states, local moments and the p–d exchange splitting. Furthermore, we found that p–d hybridization reduces the local magnetic moment of TM and produces small local magnetic moments on the nonmagnetic Zn and Se sites. We found also that in the AFM phase the TM local magnetic moments are smaller than in the FM phase; this is due to the greater interaction of the TM d-up and d-down orbitals.     

Study of magnetic and optical properties of Zn_(1-x)TM_xTe(TM = Mn,Fe,Co,Ni) diluted magnetic semiconductors:First principle approach

We present structural,magnetic and optical characteristics of Zn_(1-x)TM_xTe(TM = Mn,Fe,Co,Ni and x = 6.25%),calculated through Wien2 k code,by using full potential linearized augmented plane wave(FP-LAPW) technique.The optimization of the crystal structures have been done to compare the ferromagnetic(FM) and antiferromagnetic(AFM) ground state energies,to elucidate the ferromagnetic phase stability,which further has been verified through the formation and cohesive energies.Moreover,the estimated Curie temperatures T_c have demonstrated above room temperature ferromagnetism(RTFM) in Zn_(1-x)TM_xTe(TM =Mn,Fe,Co,Ni and x= 6.25%).The calculated electronic properties have depicted that Mn- and Co-doped ZnTe behave as ferromagnetic semiconductors,while half-metallic ferromagnetic behaviors are observed in Fe- and Ni-doped ZnTe.The presence of ferromagnetism is also demonstrated to be due to both the p-d and s-d hybridizations between the host lattice cations and TM impurities.The calculated band gaps and static real dielectric constants have been observed to vary according to Penn's model.The evaluated band gaps lie in near visible and ultraviolet regions,which make these materials suitable for various important device applications in optoelectronic and spintronic.     

Analysis of the valence electronic structures and calculation of the physical properties of Fe,Co, and Ni

The valence electronic structures of Fe, Co and Ni have been investigated with Empirical Electron Theory of Solids and Molecules. The magnetic moments, Curie temperature, cohesive energy and melting point have been calculated according to the valence electronic structure. These calculations fit the experimental data very well. Based on the calculations, the magnetic moments are proportional to the number of 3d magnetic electrons. Curie temperatures are related to the magnetic electrons and the bond lengths between magnetic atoms. Cohesive energies increase with the increase of the number of covalent electrons, and the decrease of the number of magnetic and dumb pair electrons. The melting point is mainly related to the number of covalent electron pairs distributed in the strongest bond. The contribution from the lattice electrons is very small, the dumb pair electrons weaken the melting point; however, the contribution to melting point of the magnetic electrons can be neglected. It reveals that the magnetic and thermal properties are closely related to the valence electronic structures, and the changes or transitions between the electrons obviously affect the physical properties. Supported by the National High Technology Development Program of China (Grant No. 2007AA03Z458)     

Y12TM（TM=Sc、Ti、V、Cr、Mn、Fe、Co、Ni、Cu、Zn）团簇的电子结构与磁性研究

基于第一性原理,在密度泛函理论框架下,用广义梯度近似(GGA)研究了二十面体Y12TM(TM=Sc、Ti、V、Cr、Mn、Fe、Co、Ni、Cu、Zn)团簇的电子结构和磁性,计算了它们的束缚能(BE)、中心原子到表面原子的间距、最高占据轨道(HOMO)、最低占据轨道(LUMO)及其能隙.研究表明:Y13、Y12Sc、Y12Ti、Y12V、Y12Cr团簇的主体原子和杂质原子呈现出铁磁性作用,而Y12Mn、Y12Fe、Y12Co、Y12Ni、Y12Cu、Y12Zn团簇的主体原子和杂质原子呈现出反铁磁作用.     

Ni原子链填充碳纳米管的能量、电子结构和磁性的第一性原理计算

在广义梯度近似(GGA)下,利用密度泛函理论(DFT)框架下的第一性原理投影缀加波(PAW)赝势方法,研究了单根Ni原子链填充扶手椅型(n,n)(5≤n≤9)单壁碳纳米管的能量、电子结构和磁性.结果表明(5,5)碳纳米管直径过小排斥Ni原子链的插入,(6,6)碳纳米管是容纳Ni原子链的最小碳纳米管,特别是Ni原子链位于其中心轴线上时的形成能最低.以Ni@(6,6)和Ni@(7,7)系统为例,计算并分析了其自旋极化能带结构,电子总态密度,分波态密度和磁性,发现Ni原子的3d态电子 关键词： Ni原子链 碳纳米管 电子结构 磁性能     

First-principles calculation of the structural,electronic,and magnetic properties of cubic perovskite RbXF_3(X = Mn,V,Co,Fe)

First-principles calculations by means of the full-potential linearized augmented plane wave method using the generalized gradient approximation with correlation effect correction(GGA+U) within the framework of spin polarized density functional theory(DFT+U) are used to study the structural,electronic,and magnetic properties of cubic perovskite compounds RbXF_3(X = Mn,V,Co,and Fe).It is found that the calculated structural parameters,i.e.,lattice constant,bulk modulus,and its pressure derivative are in good agreement with the previous results.Our results reveal that the strong spin polarization of the 3d states of the X atoms is the origin of ferromagnetism in RbXF_3.Cohesive energies and the magnetic moments of RbXF_3 have also been calculated.The calculated electronic properties show the half-metallic nature of RbCoF_3 and RbFeF_3,making these materials suitable for spintronic applications.     

First principles study on the structural, electronic and optical properties of diluted magnetic semiconductors Zn1-xCoxX （X=S, Se, Te）

The electronic and optical properties of zincblende ZnX（X=S, Se, Te） and ZnX：Co are studied from density functional theory （DFT） based first principles calculations. The local crystal structure changes around the Co atoms in the lattice are studied after Co atoms are doped. It is shown that the Co-doped materials have smaller lattice constant （about 0.6%-0.9%）. This is mainly due to the shortened Co-X bond length. The （partial） density of states （DOS） is calculated and differences between the pure and doped materials are studied. Results show that for the Co-doped materials, the valence bands are moving upward due to the existence of Co 3d electron states while the conductance bands are moving downward due to the reduced lattice constants. This results in the narrowed band gap of the doped materials. The complex dielectric indices and the absorption coefficients are calculated to examine the influences of the Co atoms on the optical properties. Results show that for the Co-doped materials, the absorption peaks in the high wavelength region are not as sharp and distinct as the undoped materials, and the absorption ranges are extended to even higher wavelength region.     

Ni-X-In(X=Mn,Fe和Co)合金的缺陷稳定性和磁性能的第一性原理研究

Ni-Mn-In是一种新型的磁控形状记忆合金, 它通过磁场诱导逆马氏体相变实现形状记忆效应. 实验中常围绕化学计量比Ni₂MnIn合金进行成分调整, 以获得适宜的马氏体相变温度与居里温度, 在这个过程中必然会产生多种点缺陷. 本文使用量子力学计算软件包VASP, 在密度泛函理论的框架下通过第一原理计算, 系统地研究了非化学计量比Ni-X-In(X=Mn, Fe 和Co)合金的缺陷形成能和磁性能. 反位缺陷中, In和Ni在X亚晶格的反位缺陷(In_X和Ni_X)的形成能最低, Ni和X反位于Y的亚晶格(Ni_Y和X_Y)得到较高的形成能. 因此, In原子可以稳定立方母相的结构, 而X原子对母相结构稳定性的影响则相反; 空位缺陷中最高的形成能出现在In空位缺陷, 再次肯定了In原子对稳定母相结构的作用. 此外, 详细研究了点缺陷周围原子的磁性能以及电荷分布. 本文的计算结果在指导实验中的成分设计和开发新型磁控形状记忆合金方面具有重要意义.     

LiGaX2(X=S,Se, Te)的电子结构,光学和弹性性质的第一性原理计算

采用基于第一性原理的密度泛函理论赝势平面波方法,对LiGaX₂(X=S, Se, Te)的能带结构、态密度、光学以及弹性性质进行了理论计算. 能带结构计算表明LiGaS₂ 的禁带宽度为4.146 eV, LiGaSe₂ 的禁带宽度为3.301 eV, LiGaTe₂ 的禁带宽度为2.306 eV; 其价带主要由Ga-4p 层电子和X- np 层电子的能态密度决定; 同时也对LiGaX< 关键词： 电子结构 光学性质 弹性性质 LGX     

SinMn (n=2--14) 的结构和电子性质

采用密度泛函理论对SinMn (n=2--14)的几何结构和电子性质进行了研究,结果表明,从Si12Mn 团簇开始,Mn原子陷入了Si原子形成的笼内;二阶能量差分,分裂能和垂直电离势都表明5,10,12是团簇的幻数,其中Si12Mn团簇是最稳定的;在所研究的团簇中,Si5Mn团簇中Mn原子的磁矩是最大的(3.923uB);Mn 原子的4s, 3d 和Si原子的3s, 4p的较强杂化是导致Mn原子磁矩减小的原因;当n ≥7时,SinMn团簇的总磁矩是1 uB.     

过渡金属掺杂GaN的电子结构和光学性质理论研究

采用基于密度泛函理论的第一性原理平面波赝势法计算不同过渡金属（V, Cr, Mn, Fe, Co, Ni）掺杂GaN的电子结构及光学性质,分析掺杂对电子结构及光学性质的影响.结果表明,过渡金属掺杂在GaN的禁带中引入杂质能带,除掺Fe体系外其它掺杂体系都表现为半金属性.除掺Fe和Ni体系在低能区没有出现光吸收外,其它体系均在低能区杂质能级处出现光吸收.     

Ab initio study of structural, electronic and optical properties of Be-doped CdS, CdSe and CdTe compounds

Full-potential linearized augmented plane wave plus local orbitals (FP-LAPW+lo) method within density functional theory (DFT) has been utilized to calculate structural, electronic and optical properties of Be-doped CdS, CdSe and CdTe compounds with the dopant concentration x in the range 0≤x≤1. For the contribution of exchange-correlation potential, we used Wu-Cohen generalized gradient approximation (GGA) to calculate structural parameters, whereas both Wu-Cohen and Engel-Vosko GGA have been applied to calculate electronic structure of the materials. Only a slight deviation from Vegard's law has been observed for the calculated lattice constants and bulk moduli of the alloys. Structural and chemical factors that affect the band-gap bowing of these semiconductor alloys have been estimated and discussed. Density of states curves and charge density maps have been calculated and analyzed. Lastly, optical properties of both binary and their related ternary alloys have been discussed in terms of the calculated dielectric function. The resultant optical parameters are compared with the available experimental data and other calculations.     

Structural,elastic, electronic and thermal properties of M2SbP (M = Ti,Zr and Hf)

The structural, elastic, electronic and thermal properties of M₂SbP (M = Ti, Zr and Hf) were studied by means of a pseudo-potential plane-wave method based on the density functional theory within both the local density approximation and the generalised gradient approximation. The optimised zero-pressure geometrical parameters, i.e. the two unit cell lengths (a, c) and the internal coordinate (z), were in good agreement with available experimental and theoretical data. The effect of high pressure, up to 20 GPa, on the lattice constants shows that the contractions along the a-axis were higher than along c-axis. The anisotropic independent elastic constants were calculated using the static finite strain technique. Numerical estimations of the bulk modulus, shear modulus, Young's modulus, Poisson's ratio, average sound velocity and Debye temperature for ideal polycrystalline M₂SbP aggregates were performed in the framework of the Voigt–Reuss–Hill approximation. The calculated band structures show that all studied materials are electrical conductors. Analysis of the atomic site projected densities showed that the bonding is of covalent–ionic nature with the presence of metallic character. The density of states at the Fermi level is dictated by the transition metal d–d bands; the Sb element has little effect. Thermal effects on some macroscopic properties of M₂SbP were predicted using the quasi-harmonic Debye model, in which the lattice vibrations are taken into account. The variations of the volume expansion coefficient, heat capacity and Debye temperature with pressure and temperature in the ranges 0–50 GPa and 0–2000 K were obtained successfully.     

Theoretical investigations of structural, electronic and thermal properties of Ti2AlX(X=C,N)

We have carried out a first-principles total-energy calculations of the structural and the electronic properties for the series of H-phases compounds Ti₂AlC and Ti₂AlN. We have applied the full-potential linearized augmented plane waves (FP-LAPW) method based on the density functional theory (DFT) using the local-density approximation (LDA) and/or the generalized gradient approximation (GGA). The quasi-harmonic Debye model, using a set of total energy versus volume calculations obtained with the FP-LAPW method which is applied to study the thermal and vibrational effects. Temperature and pressure effects on the structural parameters, thermal expansions, heat capacities and Debye temperatures are determined from the non-equilibrium Gibbs functions.     

Structural,elastic, thermodynamic and electronic properties of LuX (X = N,Bi and Sb) compounds: first principles calculations

ABSTRACT

The structural, electronic, elastic and thermodynamic properties of LuX (X = N, Bi and Sb) based on rare earth into phases, Rocksalt (B1) and CsCl (B2) have been investigated using full-potential linearized muffin-tin orbital method (FP-LMTO) within density functional theory. Local density approximation (LDA) for exchange-correlation potential and local spin density approximation (LSDA) are employed. The structural parameters as lattice parameters a₀, bulk modulus B, its pressure derivate B’ and cut-off energy (E_c) within LDA and LSDA are presented. The elastic constants were derived from the stress–strain relation at 0 K. The thermodynamic properties for LuX using the quasi-harmonic Debye model are studied. The temperature and pressure variation of volume, bulk modulus, thermal expansion coefficient, heat capacities, Debye temperature and Gibbs free energy at different pressures (0–50 GPa) and temperatures (0–1600 K) are predicted. The calculated results are in accordance with other data.     

(Ti1-xNbx)5AlC4(x=0.4, 0.75, 1)固溶体系的第一性原理研究

采用第一性原理计算,通过投影缀加波(PAW)和广义梯度近似(GGA)研究三元层状化合物(MAX) Ti₅AlC₄中Nb多比例掺杂M位元素.通过计算该固溶体系的声子谱、生成焓和弹性常数,讨论了(Ti_1-xNb_x)₅AlC₄固溶体系的稳定性,得到了三种稳定的结构：(Ti_0.6Nb_0.4)₅AlC₄、(Ti_0.25Nb_0.75)₅AlC₄和Nb₅AlC₄,即(Ti_1-xNb_x)₅AlC₄(x=0.4, 0.75, 1)固溶体系.Bader电荷、局域电荷密度、态密度表明该固溶体系呈现出金属特性,且电导率随着掺杂比例的增大,电荷不断转移,电导率增强.通过计算不同掺...