Low-repetition-rate,all-polarization-maintaining Yb-doped fiber laser mode-locked by a semiconductor saturable absorber

A low-repetition-rate, all-polarization-maintaining(PM)-fiber sub-nanosecond oscillator is presented, which is simple and low-cost, composed of standard components. The ring cavity is elongated by 114-m-long standard PM fiber, and passively mode-locked by a fiber pigtailed semiconductor saturable absorber. Linearly polarized pulses with 1.66 MHz repetition rate and 22 dB polarization extinction ratio are generated at a wavelength of 1030 nm, which is determined by an intracavity filter. In addition, to demonstrate that the oscillator is a good seed for high energy pulse generation, an all-fiber master oscillator power amplifier is built and amplified pulses with energy about 2 μJ are obtained.     

Passively Q-switched Er-doped fiber laser using a semiconductor saturable absorber mirror

A passively Q-switched Er-doped fiber laser using a semiconductor saturable absorber mirror (SESAM) is demonstrated. Q-switching is observed with the output power produced at a slope efficiency of 29.4% with respect to the absorbed pump power. The maximum average output power of 8.37 mW is achieved. The pulse repetition frequency obtained can be turned from 1.72 to 7.95 kHz. The pulse energy of 17.2 nJ has been obtained at the pump power of 46.75 mW, and the pulse width is 30 μs.     

国产纺锤形增益光纤主振荡功率放大器实现5 kW输出

设计了纤芯直径小—大—小变化的“纺锤形”增益光纤,利用该光纤可均衡模式不稳定和受激拉曼散射抑制的矛盾,提升光纤激光器的输出功率。基于自研的纺锤形增益光纤搭建了主振荡功率放大器（MOPA）,实现了5 kW的功率输出,放大器光光效率为66.6%,拉曼散射抑制比大于45 dB,M²因子约2.0。通过优化光纤的设计,可以提升激光器的光束质量和效率。

     

Sequential generation of self-starting diverse operations in all-fiber laser based on thulium-doped fiber saturable absorber

Self-starting Q-switching, Q-switched mode-locking and mode-locking operation modes are achieved sequentially in an all-fiber erbium-doped fiber laser with thulium-doped fiber saturable absorber for the first time. The central wavelengths of Q-switching, Q-switched mode-locking and mode-locking operation modes are 1569.7 nm, 1570.9 nm, and 1572 nm, respectively. The mode-locking operation of the proposed fiber laser generates stable dark soliton with a repetition rate of 0.99 MHz and signal-to-noise ratio of 65 dB. The results validate the capability of generating soliton pulse by doped fiber saturable absorber. Furthermore, the proposed fiber laser is beneficial to the applications of optical communication and signal processing system.     

基于石墨烯可饱和吸收体的纳秒锁模掺铥光纤激光器

报道了一种基于石墨烯可饱和吸收体的纳秒锁模掺铥光纤激光器.该激光器采用环形腔结构,利用自制的三层石墨烯薄膜作为可饱和吸收体实现锁模.同时在腔内插入一个窄带光纤光栅,约束腔内起振的纵模数,适当调节抽运功率和偏振控制器的角度,得到了重复频率为3.8 MHz、脉宽在3.8—94.3 ns之间灵活可调的2μm纳秒锁模脉冲输出,整个脉宽调节范围超过90 ns.此外,由于获得的兆赫兹纳秒锁模脉冲时间带宽积在49—1119范围内,即存在强烈的啁啾,因而可作为2μm波段啁啾脉冲放大系统中的种子源使用.     

A novel actively and passively mode-locked semiconductor optical amplifier fiber ring laser

A novel actively and passively mode-locked semiconductor optical amplifier fiber ring laser was presented, where semiconductor optical amplifier provided cavity gain and introduced nonlinear polarization rotation, whereas, intensity modulator not only acted as modulator but also polarizer. The pulses with duration below 3 ps (FWHM) and peak power about 16 mW at a repetition rate of 10 GHz can be obtained in our system and the system stability may be enhanced. To investigate system parameters effects on mode-locked pulses, a theoretical model was developed.     

A theoretical and experimental study on all-normal-dispersion Yb-doped mode-locked fiber lasers

We report on a theoretical and experimental study of an all-normal-dispersion (ANDi) Yb-doped mode-locked fiber laser, in which nonlinear polarization rotation (NPR) is used to realize mode-locking without any dispersion compensation. Based on the coupled nonlinear Schrdinger (CNLS) equation, a model simulating the mode-locked process of an allnormal-dispersion ring fiber laser is developed, which shows that the achievement of stable mode-locking depends on the alignment of the polarization controller (PC) along the fast-polarization axis of the fiber, the birefringence intensity, and the net cavity dispersion. According to the theoretical analysis, stable mode-locked pulses with pulse duration 300 ps and average output power 33.9mW at repetition rate 36MHz are obtained.     

Design optimization of all-optical actively mode-locked ring laser based on cross-gain modulation in a semiconductor optical amplifier

A complete and detailed model is presented that describes the main physical phenomena that occur in an actively mode-locked fiber ring laser based on cross-gain modulation in a semiconductor optical amplifier employed as both the gain medium and mode-locking element. The relationship between key laser parameters and the output pulse characteristics is numerically analyzed to provide simple design rules and derive a set of necessary operational conditions. The adoption of these rules and the satisfaction of these conditions enables the optimization of the laser performance and the generation of short and high energy mode-locked output pulses.     

Multiwavelength fiber laser using S-band erbium-doped fiber amplifier and semiconductor optical amplifier

A multiwavelength fiber ring laser that is based on an S-band erbium-doped fiber amplifier (EDFA) and a semiconductor optical amplifier (SOA) is developed. An optical switch is used to switch the multiwavelength fiber laser between S-band and L-band. This fiber laser can stably lase seven wavelengths in the S-band or 28 wavelengths in the L-band. Additionally, the lasing wavelengths with a signal-to-noise ratio of over 33 dB and a wavelength spacing of 100 GHz are demonstrated experimentally. The average powers of the lasing wavelength in the S-band and the L-band are −7.53 and −12.15 dBm, respectively.     

高功率、低量子亏损同带抽运掺镱光纤放大器

开展了基于同带抽运的高功率、低量子亏损的掺镱光纤放大器实验研究. 搭建了一台输出功率为21 W的1018 nm短波 长掺镱光纤激光器, 并利用其对双包层掺镱光纤进行同带抽运, 获得18.6 W的1080 nm波段激光输出, 光-光转换效率高达90.86%. 关键词： 光纤放大器 同带抽运 双包层光纤 转换效率     

Q-switched and mode-locked diode-pumped Nd:YVO4 laser with an intracavity composite semiconductor saturable absorber

We have demonstrated a passively Q-switched and mode-locked Nd:YVO₄ laser with an intracavity composite semiconductor saturable absorber (ICSSA). Stable Q-switched and mode-locked pulses with Q-switched envelope pulse duration of 180 ns and pulse repetition rate of 72 KHz have been obtained. The maximum average output power was 1.45 W at 8 W incident pump power. The repetition rate of the mode-locked pulses inside the Q-switched envelope was 154 MHz. Experimental results revealed that this ICSSA was suitable for Q-switched and mode-locked solid-state lasers.     

超低频率全正色散半导体可饱和吸收镜被动锁模光纤激光器

通过延长激光器环形腔腔长,利用高浓度掺杂的单模掺镱光纤,搭建了超低重复频率、全正色散结构的半导体可饱和吸收镜被动锁模光纤激光器。激光器的中心波长、重复频率、平均功率及单脉冲能量分别为1 064 nm,281.5 kHz,11 mW和39 nJ。为了稳定中心波长,实现自启动,激光器腔体内接入了一个带通滤波器。该激光器运行稳定,无调Q不稳定现象,极大减小了半导体可饱和吸收镜被损坏的机会。     

超低频率全正色散半导体可饱和吸收镜被动锁模光纤激光器

 通过延长激光器环形腔腔长,利用高浓度掺杂的单模掺镱光纤,搭建了超低重复频率、全正色散结构的半导体可饱和吸收镜被动锁模光纤激光器。激光器的中心波长、重复频率、平均功率及单脉冲能量分别为1 064 nm,281.5 kHz,11 mW和39 nJ。为了稳定中心波长,实现自启动,激光器腔体内接入了一个带通滤波器。该激光器运行稳定,无调Q不稳定现象,极大减小了半导体可饱和吸收镜被损坏的机会。     

光纤耦合头对行波半导体激光放大器工作特性的影响

本文阐述了半导体激光放大器组件中,末端带高折射率类球透镜的锥形光纤耦合头对放大器芯片的外腔反馈效应,从理论上对这种耦合头的反馈效应进行了计算.为了使计算结果更接近于实际情况,在理论分析中引入了厚透镜表面的菲涅耳(Fresnel)反射及有限孔径的影响.     

Fiber optical parametric oscillator based on photonic crystal fiber pumped with all-normal-dispersion mode-locked Yb:fiber laser

We demonstrate a cost effective, linearly tunable fiber optical parametric oscillator based on a home-made photonic crystal fiber pumped with a mode-locked ytterbium-doped fiber laser, providing linely tuning ranges from 1018 nm to 1038 nm for the idler wavelength and from 1097 nm to 1117 nm for the signal wavelength by tuning the pump wavelength and the cavity length. In order to obtain the desired fiber with a zero dispersion wavelength around 1060 rim, eight sam- ples of photonic crystal fibers with gradually changed structural parameters are fabricated for the reason that it is difficult to accurately customize the structural dimensions during fabrication. We verify the usability of the fabricated fiber experimen- tally via optical parametric generation and conclude a successful procedure of design, fabirication, and verification. A seed source of home-made all-normal-dispersion mode-locked ytterbium-doped fiber laser with 38.57 ps pulsewidth around the 1064 nm wavelength is used to pump the fiber optical parametric oscillator. The wide picosecond pulse pump laser enables a larger walk-off tolerance between the pump light and the oscillating light as well as a longer photonic crystal fiber of 20 m superior to the femtosecond pulse lasers, resulting in a larger parametric amplification and a lower threshold pump power of 15.8 dBm of the fiber optical parametric oscillator.     

基于多通单元的高能量耗散孤子锁模光纤振荡器

为了在有限抽运功率条件下探索基于大模场面积光 子晶体光纤的耗散孤子锁模振荡器的能量提升潜力, 本文利用多通单元将基于掺镱大模场面积光子晶体光纤锁模振荡器的腔长延展, 消除了有限抽运功率的限制, 使得该系统能够在较低平均功率水平下获得更高的单脉冲能量. 实验上构建了重复频率低至15.58 MHz的高能量光子晶体光纤锁模脉冲振荡器, 并通过分别使用6 nm带宽和12 nm带宽的两种不同带宽的光谱滤光片, 能够直接输出平均功率分别为3.73 W和4.9 W的啁啾脉冲, 对应单脉冲能量分别为239 nJ和314 nJ. 经过光栅对去啁啾后, 最窄脉冲宽度分别为56 fs和75 fs, 对应峰值功率均超过3 MW. 关键词： 多通单元 耗散孤子 飞秒 光纤激光器     

Stable multiwavelength and passively mode-locked Yb-doped fiber laser based on nonlinear polarization rotation

Based on the nonlinear polarization rotation (NPR) technique and a fiber Mach–Zehnder interferometer (MZI), a fiber laser which can work in two different modes has been demonstrated. In one mode, it works as a continuous wave (CW) multiwavelength laser, and stable dual-, triple- and tetra-wavelength lasing with the wavelength spacing of 1.1 nm are obtained. In the other mode, it works as a passively mode-locked fiber laser, and the generated pulses have a repetition rate of 10.6 MHz, an FWHM width of 800 ps and the largest energy of 1 nJ. The multi-functional property makes this fiber laser a very convenient, cost effective and multi-purpose laser source.     

Periodic adjustment of the position of a laser beam spot on a semiconductor saturable absorber mirror in a passively mode-locked solid-state laser

A laser diode end-pumped passively mode-locked Nd:YVO₄ solid-state laser with a semiconductor saturable absorber mirror (SESAM), in which the intracavity laser beam spot on the SESAM can be adjusted periodically, is investigated. Inserting a rectangular prism (RP) into the laser cavity is a promising approach towards the goal of periodically moving the position of the focus spot of the intracavity pulse on the SESAM surface to avoid the long-time irradiation of the laser beam on the same position, thereby solving a series of problems caused by damage to the SESAM and greatly prolonging its usage life. The adjustment of the rectangular prism in the laser cavity does not break the stable continuous wave (CW) mode-locked condition. The laser generates a stable picosecond pulse sequence at 1064 nm with an output power of 3.6 W and a pulse width of 14 ps. The instabilities of the output power and the pulse width are 1.77% and 4.5%, respectively.     

Degenerate four-wave mixing based all-optical wavelength conversion in a semiconductor optical amplifier and highly-nonlinear photonic crystal fiber parametric loop mirror

The idler is separated from the co-propagating pump in a degenerate four-wave mixing (DFWM) with a symmetrical parametric loop mirror (PALM), which is composed of two identical SOAs and a 70 m highly-nonlinear photonic crystal fiber (HN-PCF). The signal and pump are coupled into the symmetrical PALM from different ports, respectively. After the DFWM based wavelength conversion (WC) in the clockwise and anticlockwise, the idler exits from the signal port, while the pump outputs from its input port. Therefore, the pump is effectively suppressed in the idler channel without a high-speed tunable filter. Contrast to a traditional PALM, the DFWM based conversion efficiency is increased greatly, and the functions of the amplification and the WC are integrated in the smart SOA and HN-PCF PALM.     

Observation of wavelength-switchable solitons in an all-polarization-maintaining erbium-doped fiber cavity based on graphene saturable absorber reflector

We present the generation of wavelength-switchable single-polarization solitons in an all-polarization-maintaining erbium-doped fiber laser mode-locked by a graphene saturable absorber. Ultrashort pulses centered at the wavelength of 1531.6 nm with the duration of 816 fs and centered at the wavelength of 1557.8 nm with the duration of 402 fs are separately obtained from the same fiber laser cavity. The cavity loss adjusted by the gold reflector plays a crucial role in wavelength switching.