Study on a novel vertical enhancement-mode Ga2O3 MOSFET with FINFET structure

A novel enhanced mode(E-mode)Ga₂O₃ metal-oxide-semiconductor field-effect transistor(MOSFET)with vertical FINFET structure is proposed and the characteristics of that device are numerically investigated.It is found that the concentration of the source region and the width coupled with the height of the channel mainly effect the on-state characteristics.The metal material of the gate,the oxide material,the oxide thickness,and the epitaxial layer concentration strongly affect the threshold voltage and the output currents.Enabling an E-mode MOSFET device requires a large work function gate metal and an oxide with large dielectric constant.When the output current density of the device increases,the source concentration,the thickness of the epitaxial layer,and the total width of the device need to be expanded.The threshold voltage decreases with the increase of the width of the channel area under the same gate voltage.It is indicated that a set of optimal parameters of a practical vertical enhancement-mode Ga₂O₃ MOSFET requires the epitaxial layer concentration,the channel height of the device,the thickness of the source region,and the oxide thickness of the device should be less than 5×10¹⁶ cm^-3,less than 1.5μm,between 0.1μm-0.3μm and less than 0.08μm,respectively.     

Normally-off AlGaN/GaN heterojunction field-effect transistors with in-situ AlN gate insulator

AlGaN/GaN heterojunction field-effect transistors (HFETs) with p-GaN cap layer are developed for normally-off operation, in which an in-situ grown AlN layer is utilized as the gate insulator. Compared with the SiN_x gate insulator, the AlN/p-GaN interface presents a more obvious energy band bending and a wider depletion region, which helps to positively shift the threshold voltage. In addition, the relatively large conduction band offset of AlN/p-GaN is beneficial to suppress the gate leakage current and enhance the gate breakdown voltage. Owing to the introduction of AlN layer, normally-off p-GaN capped AlGaN/GaN HFET with a threshold voltage of 4 V and a gate swing of 13 V is realized. Furthermore, the field-effect mobility is approximately 1500 cm²·V^-1·s^-1 in the 2DEG channel, implying a good device performance.     

阶梯AlGaN外延新型Al0.25Ga0.75N/GaNHEMTs器件实验研究

本文报道了作者提出的阶梯AlGaN外延层新型AlGaN/GaN HEMTs结构的实验结果. 实验利用感应耦合等离子体刻蚀(ICP)刻蚀栅边缘的AlGaN外延层, 形成阶梯的AlGaN 外延层结构, 获得浓度分区的沟道2DEG, 使得阶梯AlGaN外延层边缘出现新的电场峰, 有效降低栅边缘的高峰电场, 从而优化了AlGaN/GaN HEMTs器件的表面电场分布. 实验获得了阈值电压-1.5 V的新型AlGaN/GaN HEMTs器件. 经过测试, 同样面积的器件击穿电压从传统结构的67 V提高到新结构的106 V, 提高了58%左右; 脉冲测试下电流崩塌量也比传统结构减少了30%左右, 电流崩塌效应得到了一定的缓解.     

Evaluation of a gate-first process for AlGaN/GaN metal-oxide-semiconductor heterostructure field-effect transistors with low ohmic annealing temperature

In this paper, TiN/AlO_x gated Al Ga N/Ga N metal–oxide–semiconductor heterostructure field-effect transistors(MOSHFETs) were fabricated for gate-first process evaluation. By employing a low temperature ohmic process, ohmic contact can be obtained by annealing at 600℃ with the contact resistance approximately 1.6 ?·mm. The ohmic annealing process also acts as a post-deposition annealing on the oxide film, resulting in good device performance. Those results demonstrated that the TiN/AlO_x gated MOS-HFETs with low temperature ohmic process can be applied for self-aligned gate Al Ga N/Ga N MOS-HFETs.     

退火对AlGaInP/GaInP多量子阱 LED外延片性能的影响

采用LP-MOCVD技术在n-GaAs衬底上生长了AlGaInP/GaInP多量子阱红光LED外延片.研究表明退火对外延片性能有重要影响.与未退火样品相比,460℃退火15min,外延片p型GaP层的空穴浓度由5.6×10¹⁸cm^-3增大到6.5×10¹⁸cm^-3,p型AlGaInP层的空穴浓度由6.0×10¹⁷cm^-3增大到1.1×10¹⁸cm^-3.但退火温度为780℃时,p型GaP层和p型AlGaInP层的空穴浓度分别下降至8×10¹⁷cm^-3和1.7×10¹⁷cm^-3,且Mg原子在AlGaInP系材料中的扩散加剧,导致未掺杂AlGaInP/GaInP多量子阱呈现p型电导.在460～700℃退火范围内,并没有使AlGaInP/GaInP多量子阱的发光性能发生明显变化.但退火温度为780℃时,AlGaInP/GaInP多量子阱的发光强度是退火前的2倍.     

940nm垂直腔面发射激光器的设计及制备

利用PICS3D计算得到InGaAs/GaAsP应变补偿量子阱的增益特性,得到量子阱的各项参数,再通过传输矩阵理论和TFCalc膜系设计软件分别仿真出上下分布式布拉格反射镜的白光反射谱.采用金属有机化合物气相沉积技术外延生长了垂直腔面发射激光器结构,之后通过干法刻蚀、湿法氧化以及金属电极等芯片技术制备得到8μm氧化孔径的VCSEL芯片.最终,测试得到其光电特性实现室温下阈值电流和斜效率分别为0.95 mA和0.96 W/A,在6 mA电流和2 V电压下输出功率达到4.75 mW,并测试了VCSEL的高温特性.     

Improved device performance of recessed-gate AlGaN/GaN HEMTs by using in-situ N2O radical treatment

The N₂O radicals in-situ treatment on gate region has been employed to improve device performance of recessed-gate AlGaN/GaN high-electron-mobility transistors (HEMTs). The samples after gate recess etching were treated by N₂O radicals without physical bombardment. After in-situ treatment (IST) processing, the gate leakage currents decreased by more than one order of magnitude compared to the sample without IST. The fabricated HEMTs with the IST process show a low reverse gate current of 10^-9 A/mm, high on/off current ratio of 10⁸, and high f_T×L_g of 13.44 GHz· μm. A transmission electron microscope (TEM) imaging illustrates an oxide layer with a thickness of 1.8 nm exists at the AlGaN surface. X-ray photoelectron spectroscopy (XPS) measurement shows that the content of the Al-O and Ga-O bonds elevated after IST, indicating that the Al-N and Ga-N bonds on the AlGaN surface were broken and meanwhile the Al-O and Ga-O bonds formed. The oxide formed by a chemical reaction between radicals and the surface of the AlGaN barrier layer is responsible for improved device characteristics.     

InGaZnO薄膜晶体管背板的栅极驱动电路静电释放失效研究

本文通过解析阵列基板栅极驱动(gate driver on array, GOA)电路中发生静电释放(electro-static discharge,ESD)的InGaZnO薄膜晶体管(InGaZnO thin-film transistor, IGZO TFT)器件发现:栅极Cu金属扩散进入了SiN_x/SiO_2栅极绝缘层;源漏极金属层成膜前就发生了ESD破坏;距离ESD破坏区域越近的IGZO TFT,电流开关比越小,直到源漏极与栅极完全短路.本文综合IGZO TFT器件工艺、GOA区与显示区金属密度比、栅极金属层与绝缘层厚度非均匀性分布等因素,采用ESD器件级分析与系统级分析相结合的方法,提出栅极Cu:SiN_x/SiO_2界面缺陷以及这三层薄膜的厚度非均匀分布是导致GOA电路中沟道宽长比大的IGZO TFT发生ESD失效的关键因素,并针对性地提出了改善方案.     

金属Pt薄膜上二氧化钒的制备及其电致相变性能研究

通过引入SiO₂氧化物缓冲层, 在金属Pt电极上利用射频磁控溅射技术成功制备出高质量的VO₂薄膜. 详细研究了SiO₂厚度对VO₂薄膜的晶体结构、微观形貌和绝缘体–金属相变(MIT)性能的影响. 结果表明厚度0.2 μm以上的SiO₂缓冲层能够有效 消除VO₂薄膜与金属薄膜之间的巨大应力, 制备出具有明显相变特性的VO₂薄膜. 当缓冲层达到0.7 μm以上, 获得的薄膜具有明显的(011)晶面择优取向, 表面平整致密, 相变前后电阻率变化达到3个数量级以上. 基于该技术制备了Pt-SiO₂/VO₂-Au三明治结构, 通过在垂直膜面方向施加很小的驱动电压, 观察到明显的阶梯电流跳跃, 证实实现了电致绝缘体–金属相变过程. 该薄膜制备工艺简单, 性能稳定, 器件结构灵活可应用于集成式电控功能器件. 关键词： 二氧化钒薄膜 相变特性 电致相变 阈值电压     

单晶金刚石氢终端场效应晶体管特性

基于微波等离子体化学气相淀积生长的单晶金刚石制作了栅长为2μm的耗尽型氢终端金刚石场效应晶体管,并对器件特性进行了分析.器件的饱和漏电流在栅压为-6 V时达到了96 mA/mm,但是在-6 V时栅泄漏电流过大.在-3.5 V的安全工作栅压下,饱和漏电流达到了77 mA/mm.在器件的饱和区,宽5.9 V的栅电压范围内,跨导随着栅电压的增加而近线性增大到30 mS/mm.通过对器件导通电阻和电容-电压特性的分析,氢终端单晶金刚石的二维空穴气浓度达到了1.99×10~(13)cm~(-2),并且迁移率和载流子浓度均随着栅压向正偏方向的移动而逐渐增大.分析认为,沟道中高密度的载流子、大的栅电容以及迁移率的逐渐增加是引起跨导在很大的栅压范围内近线性增加的原因.     

MoO3为缓冲层的高效非掺杂蓝色有机发光二极管

以典型蓝色发光材料-联苯乙烯衍生物(4,4’-bis(2,2’-diphenylvinyl) -1,1’-biphenyl,DPVBi)为发光层,采用MoO3为阳极缓冲层制备了结构简单的非掺杂型蓝色有机电致发光器件.在电流密度为20 mA/cm2、MoO3缓冲层厚度为0.5 nm对器件效率约为无缓冲层器件效率的18倍,...     

Electric field modulation technique for high-voltage AlGaN/GaN Schottky barrier diodes

A novel structure of AlGaN/GaN Schottky barrier diode(SBD) featuring electric field optimization techniques of anode-connected-field-plate(AFP) and magnesium-doped p-type buried layer under the two-dimensional electron gas(2DEG) channel is proposed.In comparison with conventional AlGaN/GaN SBDs,the magnesium-doped p-type buried layer in the proposed structure can provide holes that can help to deplete the surface 2DEG.As a result,surface field strength around the electrode edges is significantly suppressed and the electric field along the channel is distributed more evenly.Through 2D numerical analysis,the AFP parameters(field plate length,L AFP,and field plate height,T AFP) and p-type buried layer parameters(p-type layer concentration,N P,and p-type layer thickness,T P) are optimized to achieve a three-equal-peak surface channel field distribution under exact charge balance conditions.A novel structure with a total drift region length of 10.5 μm and a magnesium-doped p-type concentration of 1 × 1017cm-3achieves a high breakdown voltage(V B) of 1.8 kV,showing 5 times improvement compared with the conventional SBD with the same device dimension.     

Effect of gate length on breakdown voltage in AlGaN/GaN high-electron-mobility transistor

The effects of gate length L_G on breakdown voltage VBRare investigated in AlGaN/GaN high-electron-mobility transistors(HEMTs) with L_G= 1 μm~20 μm. With the increase of L_G, VBRis first increased, and then saturated at LG= 3 μm. For the HEMT with L_G= 1 μm, breakdown voltage VBRis 117 V, and it can be enhanced to 148 V for the HEMT with L-_G= 3 μm. The gate length of 3 μm can alleviate the buffer-leakage-induced impact ionization compared with the gate length of 1 μm, and the suppression of the impact ionization is the reason for improving the breakdown voltage.A similar suppression of the impact ionization exists in the HEMTs with LG 3 μm. As a result, there is no obvious difference in breakdown voltage among the HEMTs with LG= 3 μm~20 μm, and their breakdown voltages are in a range of 140 V–156 V.     

700℃退火下铝调制镍硅锗薄膜的外延生长机理

文章研究了在700℃退火下,铝插入层调制镍和硅锗合金反应形成单相镍硅锗化物的生长机理.透射电镜测试结果表明,镍硅锗薄膜和硅锗衬底基本达到赝晶生长;二次质谱仪和卢瑟福沟道背散射测试结果表明,在镍硅锗薄膜形成的过程中,铝原子大部分移动到镍硅锗薄膜的表面.研究结果表明,铝原子的存在延迟了镍和硅锗合金的反应,镍硅锗薄膜的热稳定性和均匀性都得到了提高.最后,基于上述实验结果给出了铝原子调制形成外延镍硅锗薄膜的生长机理.     

Ni/Au与N掺杂p型ZnO的欧姆接触

研究了Au,In,Ni/Au三种不同金属膜与N掺杂p型ZnO的接触特性,发现Ni/Au双层膜更适合作为其欧姆电极材料,并比较了不同气氛和不同温度退火对Ni/Au电极的影响.发现在O₂中退火电极性能发生蜕变,而在N₂中退火性能得到改善.指出即使在N₂中退火,退火温度的选择也是至关重要的,本实验在400℃,氮气气氛下退火150s,得到了较好的欧姆接触特性.     

Origin of cathodic degradation and new phase formation at the La0.9Sr0.1MnO3/YSZ interface

New phase formation at the La_0.9Sr_0.1MnO₃/YSZ interface and its effects on the cathodic performances were studied at 900 °C in air. The resistance caused by the interfacial product layer kept increasing with time to reach up to 40% of the total resistance after 500 h. The interfacial product was identified as La₂Zr₂O₇ by XRD measurement. The electrical conductivity of La₂Zr₂O₇ (2.4 × 10⁻⁵ S cm⁻¹ at 1000 °C), measured by AC impedance and current interruption methods, was 4 to 7 orders of magnitude smaller than those of La_0.9Sr_0.1MnO₃ electrode or YSZ electrolyte. Either the electronic conductivity or the electrochemical O₂ reduction activity of La₂Zr₂O₇ was negligible. Combining these results, a conclusion was made that the cathodic degradation comes mainly from the growth of interfacial product layer and its contribution to the cell resistance increment is ohmic in nature.     

Conductivity and applications of Li-biphenyl-1,2-dimethoxyethane solution for lithium ion batteries

The total conductivity of Li-biphenyl-1,2-dimethoxyethane solution(Li_xBp(DME)_(9.65), Bp = biphenyl, DME = 1,2-dimethoxyethane, x = 0.25, 0.50, 1.00, 1.50, 2.00) is measured by impedance spectroscopy at a temperature range from 0℃ to 40℃. The Li_(1.50)Bp(DME)_(9.65) has the highest total conductivity 10.7 m S/cm. The conductivity obeys Arrhenius law with the activation energy(E_(a(x=0.50))= 0.014 eV, E_(a(x=1.00))= 0.046 eV). The ionic conductivity and electronic conductivity of Li_xBp(DME)_(9.65) solutions are investigated at 20℃ using the isothermal transient ionic current(ITIC) technique with an ion-blocking stainless steal electrode. The ionic conductivity and electronic conductivity of Li_(1.00)Bp(DME)_(9.65) are measured as 4.5 mS/cm and 6.6 mS/cm, respectively. The Li_(1.00)Bp(DME)_(9.65) solution is tested as an anode material of half liquid lithium ion battery due to the coexistence of electronic conductivity and ionic conductivity. The lithium iron phosphate(LFP) and Li_(1.5)Al_(0.5)Ti_(1.5)(PO_4)_3(LATP) are chosen to be the counter electrode and electrolyte, respectively. The assembled cell is cycled in the voltage range of 2.2 V-3.75 V at a current density of 50 mA/g. The potential of Li_(1.00)Bp(DME)_(9.65) solution is about 0.3 V vs. Li~+/Li, which indicates the solution has a strong reducibility. The Li_(1.00)Bp(DME)_(9.65) solution is also used to prelithiate the anode material with low first efficiency, such as hard carbon, soft carbon and silicon.     

具有高阈值电压和大栅压摆幅的常关型槽栅AlGaN/GaN金属氧化物半导体高电子迁移率晶体管

介绍了一种具有高阈值电压和大栅压摆幅的常关型槽栅AlGaN/GaN金属氧化物半导体高电子迁移率晶体管。采用原子层淀积(ALD)方法实现Al₂O₃栅介质的沉积。槽栅常关型AlGaN/GaN MOS-HEMT的栅长(L_g)为2 μm,栅宽(W_g)为0.9 mm(0.45 mm×2),栅极和源极(L_gs)之间的距离为5 μm,栅极和漏极(L_gd)之间的距离为10 μm。在栅压为－20 V时,槽栅常关型AlGaN/GaN MOS-HEMT的栅漏电仅为0.65 nA。在栅压为+12 V时,槽栅常关型AlGaN/GaN MOS-HEMT的栅漏电为225 nA。器件的栅压摆幅为－20~+12 V。在栅压V_gs=+10 V时,槽栅常关型AlGaN/GaN MOS-HEMT电流和饱和电流密度分别达到了98 mA和108 mA/mm (W_g=0.9 mm), 特征导通电阻为4 mΩ·cm²。槽栅常关型AlGaN/GaN MOS-HEMT的阈值电压为+4.6 V,开启与关断电流比达到了5×10⁸。当V_ds=7 V时,器件的峰值跨导为42 mS/mm (W_g=0.9 mm,V_gs=+10 V)。在V_gs=0 V时,栅漏间距为10 μm的槽栅常关型AlGaN/GaN MOS-HEMT的关断击穿电压为450 V,关断泄露电流为0.025 mA/mm。     

ZnO/ZnMgO异质结场效应管的制备与性能研究

利用等离子体增强化学气相沉积(PECVD)技术,在ZnO/ZnMgO异质结构上制备SiO₂作为栅绝缘层,采用光刻与腐蚀工艺制备ZnO/ZnMgO异质结场效应管。电学性能测试及计算结果表明器件栅压调控作用明显。发现栅端漏电流对器件性能造成一定影响。在低温条件下,栅绝缘层产生钝化,从而能够改善器件的性能。     

Atomic-layer-deposited Al_2O_3 and HfO_2 on InAlAs: A comparative study of interfacial and electrical characteristics

Al_2O_3 and HfO_2 thin films are separately deposited on n-type InAlAs epitaxial layers by using atomic layer deposition(ALD).The interfacial properties are revealed by angle-resolved x-ray photoelectron spectroscopy(AR-XPS).It is demonstrated that the Al_2O_3 layer can reduce interfacial oxidation and trap charge formation.The gate leakage current densities are 1.37×10~6 A/cm~2 and 3.22×10~6 A/cm~2 at+1V for the Al_2O_3/InAlAs and HfO_2/InAlAs MOS capacitors respectively.Compared with the HfO_2/InAlAs metal-oxide-semiconductor(MOS) capacitor,the Al_2O_3/InAlAS MOS capacitor exhibits good electrical properties in reducing gate leakage current,narrowing down the hysteresis loop,shrinking stretch-out of the C-V characteristics,and significantly reducing the oxide trapped charge(Q_(ot)) value and the interface state density(D_(it)).