Impact of autocatalysis chemical reaction on nonlinear radiative heat transfer of unsteady three-dimensional Eyring–Powell magneto-nanofluid flow

The structure of the chaotic attractor of a system is mainly determined by the nonlinear functions in system equations. By using a new saw-tooth wave function and a new stair function, a novel complex grid multiwing chaotic system which belongs to non-Shil’nikov chaotic system with non-hyperbolic equilibrium points is proposed in this paper. It is particularly interesting that the complex grid multiwing attractors are generated by increasing the number of non-hyperbolic equilibrium points, which are different from the traditional methods of realising multiwing attractors by adding the index-2 saddle-focus equilibrium points in double-wing chaotic systems. The basic dynamical properties of the new system, such as dissipativity, phase portraits, the stability of the equilibria, the time-domain waveform, power spectrum, bifurcation diagram, Lyapunov exponents, and so on, are investigated by theoretical analysis and numerical simulations. Furthermore, the corresponding electronic circuit is designed and simulated on the Multisim platform. The Multisim simulation results and the hardware experimental results are in good agreement with the numerical simulations of the same system on Matlab platform, which verify the feasibility of this new grid multiwing chaotic system.     

Hybrid nanofluid flow over two different geometries with Cattaneo–Christov heat flux model and heat generation: A model with correlation coefficient and probable error

The authors scrutinize the steady, MHD flow of SiO₂−MoS₂/water hybrid nanofluid towards two different geometries i.e. a wedge and a cone. The Tiwari and Das model is implemented with a generalized–Fourier's model, popularized as Cattaneo-Christov heat flux model. Analysis of heat transfer also incorporates the effects of suction, heat generation and thermal radiation. To showcase the relationship between engineering quantities and pertinent parameters involved in the study, the correlation coefficient for heat transfer coefficient and the skin friction coefficient is computed followed by the computation of probable error and statistical declaration. Similarity transformations are utilized to remodel the constitutive laws of flow in non-dimensional form. Numerical computation of non-linear, coupled O.D.E.’s is performed with the support of the Runge-Kutta-Fehlberg scheme and shooting method. Graphical and tabular illustrations of computed results are provided to report the variation in flow properties with the fluctuation in physical parameters. In both cases, i.e. flow close to a wedge and a cone, the temperature of hybrid nanofluid enhances on intensifying the thermal radiation and experiences a decrement with thermal relaxation parameter and magnetic field. Rising values of the suction parameter, thermal relaxation parameter, and thermal radiation cause increment in heat transfer coefficient. Interestingly, it was spotted that the heat generation parameter has contrary effects on temperature distribution over the two geometries.     

Nonlinear Rayleigh–Taylor instability of the cylindrical fluid flow with mass and heat transfer

The nonlinear Rayleigh–Taylor stability of the cylindrical interface between the vapour and liquid phases of a fluid is studied. The phases enclosed between two cylindrical surfaces coaxial with mass and heat transfer is derived from nonlinear Ginzburg–Landau equation. The F-expansion method is used to get exact solutions for a nonlinear Ginzburg–Landau equation. The region of solutions is displayed graphically.     

Analytical study of Cattaneo–Christov heat flux model for a boundary layer flow of Oldroyd-B fluid

We investigate the Cattaneo–Christov heat flux model for a two-dimensional laminar boundary layer flow of an incompressible Oldroyd-B fluid over a linearly stretching sheet. Mathematical formulation of the boundary layer problems is given. The nonlinear partial differential equations are converted into the ordinary differential equations using similarity transformations. The dimensionless velocity and temperature profiles are obtained through optimal homotopy analysis method(OHAM). The influences of the physical parameters on the velocity and the temperature are pointed out. The results show that the temperature and the thermal boundary layer thickness are smaller in the Cattaneo–Christov heat flux model than those in the Fourier's law of heat conduction.     

Boundary layer flow and heat transfer of a Casson fluid past a symmetric porous wedge with surface heat flux

The aim of this paper is to investigate numerically the boundary layer forced convection flow of a Casson fluid past a symmetric porous wedge. Similarity transformations are used to convert the governing partial differential equations into ordinary ones. With the help of the shooting method, the reduced equations are then solved numerically. Comparisons are made with the previously published results in some special cases and they are found to be in excellent agreement with each other. The results obtained in this study are illustrated graphically and discussed in detail. The velocity is found to increase with an increasing Falkner-Skan exponent whereas the temperature decreases. With the rise of the Casson fluid parameter, the fluid velocity increases but the temperature is found to decrease in this case. Fluid velocity is suppressed with the increase of suction. The skin friction decreases with the increasing value of Casson fluid parameter. It is found that the temperature decreases as the Prandtl number increases and thermal boundary layer thickness decreases with the increasing value of Prandtl number. A significant finding of this investigation is that flow separation can be controlled by increasing the value of the Casson fluid parameter as well as by increasing the amount of suction.     

Analytical prediction of multiple solutions for MHD Jeffery–Hamel flow and heat transfer utilizing KKL nanofluid model

In this framework, the novel analytical approach is presented to predict the dual solutions of Jeffery–Hamel (JH) transport model utilizing KKL (Koo–Kleinstreuer–Li) Al₂O₃ model with magnetic field, Ohmic heating and viscous dissipation. The predictor homotopy analysis method (PHAM) is applied to realize the existence of multiple solutions (bifurcation) for stretching/shrinking parameter and channel angle. It is observed that the dual solutions exist only for convergent channel. The eigenvalue problem is constructed to perform stability analysis which shows the physically stability of the upper branch. A numerical validation with Runge–Kutta–Fehlberg (RKF) shooting method using MATLAB is also carried out for verification. The Reynolds number is responsible to increase the velocity of fluid for both branches of the solution. For the increasing values of Ec and M, the Nusselt number decreases and increases respectively.     

Erratum to “Boundary layer flow and heat transfer of a Casson fluid past a symmetric porous wedge with surface heat flux”

We would like to acknowledge the misprinted terms in our published paper “Boundary layer flow and heat transfer of a Casson fluid past a symmetric porous wedge with surface heat flux” [Chin. Phys. B 23 044702 (2014)]. Since only two misprints exist and the main results of the published paper are correct, we present the correct equations in this erratum.     

An optimal analysis for Darcy–Forchheimer 3D flow of nanofluid with convective condition and homogeneous–heterogeneous reactions

Here Darcy–Forchheimer 3D stretching flow of nanoliquid in the presence of convective condition and homogeneous–heterogeneous reactions is analyzed. Impacts of thermophoresis, Brownian diffusion and zero nanoparticles mass flux condition are considered. Adequate transformation procedure give rise to system in terms of ordinary differential equations. The governing mathematical system has been tackled by optimal homotopic technique. Graphical results have been presented for temperature and concentration dsitributions. Numerical benchmark is provided to study the values of skin friction coefficients and local Nusselt number. Skin friction coefficients are declared increasing functions of porosity and Forchheimer parameters. Furthermore the local Nusselt number is reduced for larger values of porosity and Forchheimer parameters.     

Numerical approach for stagnation point flow of Sutterby fluid impinging to Cattaneo–Christov heat flux model

This paper presents a comprehensive modelling and simulation study on the optimum parameters that control the distortion and noise of semiconductor lasers (SLs) subject to multichannel modulation for use in analog cable television (CATV) fibre links. The study is based on numerical integration of the rate equation model of the semiconductor laser. The parameters comprise the modulation index per channel (m / ch), number of loaded channels (N) and fibre length \((L_{F})\). The signal distortions include the composite second-order (CSO) and composite triple beat (CTB) distortions. The noise is assessed in terms of the relative intensity noise (RIN) and carrier-to-noise ratio (CNR). In order to achieve acceptable CNR values for SL, m / ch should be less than 7.5 and 2% when loading 12 and 80 channels, respectively. For the CATV fibre link with \(L_{F} = 10 \hbox { km}\), the increase in the number of channels from 12 to 80 corresponds to lowering the optimum value of m / ch from 7 to 1%. The increase of \(L_{F}\) to 50 km limits the optimum value of m / ch between 1.4 and 1%, which corresponds to loading between 12 and 17 channels only.     

β-distribution for Reynolds stress and turbulent heat flux in relaxation turbulent boundary layer of compression ramp

A challenge in the study of turbulent boundary layers(TBLs) is to understand the non-equilibrium relaxation process after separation and reattachment due to shock-wave/boundary-layer interaction. The classical boundary layer theory cannot deal with the strong adverse pressure gradient, and hence, the computational modeling of this process remains inaccurate. Here, we report the direct numerical simulation results of the relaxation TBL behind a compression ramp, which reveal the presence of intense large-scale eddies, with significantly enhanced Reynolds stress and turbulent heat flux. A crucial finding is that the wall-normal profiles of the excess Reynolds stress and turbulent heat flux obey a β-distribution, which is a product of two power laws with respect to the wall-normal distances from the wall and from the boundary layer edge. In addition, the streamwise decays of the excess Reynolds stress and turbulent heat flux also exhibit power laws with respect to the streamwise distance from the corner of the compression ramp. These results suggest that the relaxation TBL obeys the dilation symmetry, which is a specific form of self-organization in this complex non-equilibrium flow. The β-distribution yields important hints for the development of a turbulence model.     

Similarity solutions for boundary layer flow and heat transfer of a FENE-P fluid with thermal radiation

This Letter presents a numerical study of the flow and heat transfer of an incompressible FENE-P fluid over a non-isothermal surface. The governing partial differential equations are converted into ordinary differential equations by a similarity transformation. The effects of the thermal radiation are considered in the energy equation, and the variations of dimensionless surface temperature and dimensionless surface temperature gradient, as well as the heat transfer characteristics with various physical parameters are graphed and tabulated. Two cases are studied, namely, (i) the sheet with prescribed surface temperature (PST case) and (ii) the sheet with prescribed heat flux (PHF case). Moreover, the mechanical characteristics of the corresponding flow are also presented.     

Convective heat and zero-mass flux conditions in the time-dependent second-grade nanofluid flow by unsteady bidirectional surface movement

In this paper, a theoretical model is developed for the deliberation of time-dependent 3D magnetohydrodynamics second-grade (SG) nanofluid with radiation effects past an unsteady stretched surface. The work is carried out by involving the physical effects of thermophoresis and Brownian movement. To find the desired solutions, more practical boundary conditions are introduced familiar as the Robin and zero-mass diffusion conditions. The derived model of partial differential form is reframed into the structure of ordinary differential expressions by implementing the dimensionless variables which are reported numerically through the Runge-Kutta-Fehlberg (RKF) scheme with shooting procedure. Numerically determined skin-friction data and energy transportation rate are also addressed with appropriate analysis. Solutions are performed for nanofluid velocity, concentration of nanoparticles and nanofluid temperature. The analysis of dissimilar parametric values on liquid velocity, concentration of nanoparticles and temperature is reported using plots and tabulated data. The presence of Hartman and Biot numbers demonstrated the higher temperature curves. The nanoparticle concentration and temperature distributions reduced for larger unsteady parameter values. A comparison is also provided for limiting cases to authenticate our obtained results.     

Heat transfer in boundary layer stagnation-point flow towards a shrinking sheet with non-uniform heat flux

In this paper, the effect of non-uniform heat flux on heat transfer in boundary layer stagnation-point flow over a shrinking sheet is studied. The variable boundary heat fluxes are considered of two types: direct power-law variation with the distance along the sheet and inverse power-law variation with the distance. The governing partial differential equations (PDEs) are transformed into non linear self-similar ordinary differential equations (ODEs) by similarity transformations, and then those are solved using very efficient shooting method. The direct variation and inverse variation of heat flux along the sheet have completely different effects on the temperature distribution. Moreover, the heat transfer characteristics in the presence of non-uniform heat flux for several values of physical parameters are also found to be interesting.     

Peristaltic blood flow with gold nanoparticles as a third grade nanofluid in catheter: Application of cancer therapy

Cancer is dangerous and deadly to most of its patients. Recent studies have shown that gold nanoparticles can cure and overcome it, because these particles have a high atomic number which produce the heat and leads to treatment of malignancy tumors. A motivation of this article is to study the effect of heat transfer with the blood flow (non-Newtonian model) containing gold nanoparticles in a gap between two coaxial tubes, the outer tube has a sinusoidal wave traveling down its wall and the inner tube is rigid. The governing equations of third-grade fluid along with total mass, thermal energy and nanoparticles are simplified by using the assumption of long wavelength. Exact solutions have been evaluated for temperature distribution and nanoparticles concentration, while approximate analytical solutions are found for the velocity distribution using the regular perturbation method with a small third grade parameter. Influence of the physical parameters such as third grade parameter, Brownian motion parameter and thermophoresis parameter on the velocity profile, temperature distribution and nanoparticles concentration are considered. The results pointed to that the gold nanoparticles are effective for drug carrying and drug delivery systems because they control the velocity through the Brownian motion parameter $N_b$ and thermophoresis parameter $N_t$. Gold nanoparticles also increases the temperature distribution, making it able to destroy cancer cells.     

Magnetohydrodynamic flow of burgers fluid with heat source and power law heat flux

Here magnetohydrodynamic (MHD) two-dimensional (2D) flow of an incompressible Burgers material bounded by a permeable stretched surface is addressed. The boundary layer flow equations are modelled. Heat transfer is discussed for power law heat flux at the surface and heat source. Convergent series solutions are constructed. Clarification of different emerging variables is presented through graphs of velocity, temperature and local Nusselt number. The present solutions are matched with the available published work in a limiting case.     

Unsteady MHD flow and heat transfer of fractional Maxwell viscoelastic nanofluid with Cattaneo heat flux and different particle shapes

The paper aims to investigate the unsteady natural convection flow and heat transfer of fractional Maxwell viscoelastic nanofluid in magnetic field over a vertical plate. The effect of nanoparticle shape is first introduced to the study of fractional Maxwell viscoelastic nanofluid. Fractional shear stress and Cattaneo heat flux model are applied to construct the governing boundary layer equations of momentum and energy, which are solved numerically. The quantities of physical interest are graphically presented and discussed in detail. It is found that particle shape and fractional derivative parameters have profound influence on the flow and heat transfer.     

Impact of melting heat transfer in the time-dependent squeezing nanofluid flow containing carbon nanotubes in a Darcy-Forchheimer porous media with Cattaneo-Christov heat flux

This study aims to investigate the time-dependent squeezing of nanofluid flow, comprising carbon nanotubes of dual nature, e.g. single-walled carbon nanotubes, and multi-walled carbon nanotubes,between two parallel disks. Numerical simulations of the proposed novel model are conducted,accompanied by Cattaneo-Christov heat flux in a Darcy-Forchheimer permeable media. Additional impacts of homogeneous–heterogeneous reactions are also noted, including melting heat. A relevant transformation procedure is implemented for the transition of partial differential equations to the ordinary variety. A computer software-based MATLAB function, bvp4c, is implemented to handle the envisioned mathematical model. Sketches portraying impacts on radial velocity, temperature, and concentration of the included parameters are given, and deliberated upon. Skin friction coefficient and local Nusselt number are evaluated via graphical illustrations. It is observed that the local inertia coefficient has an opposite impact on radial velocity and temperature field. It is further perceived that melting and radiation parameters demonstrate a retarding effect on temperature profile.