Reduction of silver nitrate by polyaniline nanotubes to produce silver-polyaniline composites

Polyaniline (PANI) nanotubes were prepared by oxidation of aniline in 0.4 M acetic acid. They were subsequently used as a reductant of silver nitrate in 1 M nitric acid, water or 1 M ammonium hydroxide at various molar ratios of silver nitrate to PANI. The resulting PANI-silver composites contained silver nanoparticles of 40–60 nm size along with macroscopic silver flakes. Under these experimental conditions, silver was always produced outside the PANI nanotubes. Changes in the molecular structure of PANI were analyzed by FTIR spectroscopy. Silver content in the composites was determined as a residue by thermogravimetric analysis, and confirmed by density measurements. The highest conductivity of a composite, 68.5 S cm⁻¹, was obtained at the nitrate to PANI molar ratio of 0.67 in water. Also, the best reaction yield was obtained in water. Reductions performed in an acidic medium gave products with conductivity of 10⁻⁴–10⁻² S cm⁻¹, whereas the reaction in alkaline solution yielded non-conducting products.     

Doping of processable conducting poly(m‐aminophenol) with silver nanoparticles

Processable poly(m‐aminophenol) (PmAP) was synthesized using ammonium persulfate (APS) oxidant in 0.6 M sodium hydroxide solution at room temperature. Soluble silver hydroxide ammonium complex was formed by dissolving silver nitrate in excess liquor ammonia and the thermal decomposition of this complex easily produced silver nanoparticle. Then, in situ silver nanoparticle‐doped PmAP film was obtained by casting PmAP film from dimethyl sulfoxide (DMSO) with silver hydroxide ammonia complex mixture at 140°C. The nanocomposite was characterized by ultraviolet‐visible spectroscopy, Fourier transformed spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy, electron dispersion spectroscopy, thermogravimetric analysis, and X‐ray diffraction analysis. The average size of the nanoparticle was around 130–140 nm as confirmed by the TEM analysis. Synthesized PmAP silver nanocomposite showed the highest DC‐conductivity of 1.03 × 10^?6 S/cm. From the above characterizations, it can be said that silver nanoparticle shows some doping effect on the conductivity of PmAP. The doping level of the silver nanoparticle inside the polymer was optimized in terms of DC‐conductivity of the silver nanoparticle‐doped PmAP film. Copyright © 2009 John Wiley & Sons, Ltd.     

Antibacterial studies of bio-functionalized carbon decorated silver nanoparticles (AgNPs)

In the present report, Lemon juice (bio-extract) extract was efficaciously used for the synthesis of bio-functionalized silver nanoparticles (Ag-1, Ag-2 & Ag-3 NPs) and decorated with carbon material obtained from mustard oil. The morphology, size, crystal structure, formation and interaction were studied by means of innumerable analytical methods including scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. The XRD results approve the formation of AgNPs with face-centered cubic (fcc) lattice. The XRD results also exhibit some unassigned peaks which might be due to the presence of bio-organic materials on the surface of AgNPs. The bands observed from the IR spectra showing the involvement of biomolecules onto the surface of silver nanoparticles. Mostly citric acid plays a major role in bio-reduction, capping agent, and stabilization of silver ions. We attained maximal inhibition zone (2.10 ​± ​0.05 and 2.03 ​± ​0.027) counter to gram-negative bacteria K. pneumoniae and P. bacilli with Ag-3 respectively, but lowest inhibition zone (1.27 ​± ​0.22) contrary to S. aureus as a gram-positive bacteria with Ag-2.     

In situ generation of silver nanoparticles in cellulose matrix using Azadirachta indica leaf extract as a reducing agent

In the present work, silver nanoparticles (AgNPs) were in situ generated in cellulose matrix using leaf extract of Azadirachta indica as a reducing agent. The cellulose/AgNP composite films prepared were characterized by FTIR, X-ray diffraction (XRD), scanning electron microscope, and antibacterial tests. The infrared spectra indicated the association of organic materials with silver nanoparticles to serve as capping agents. Scanning electron micrographs showed that synthesized silver nanoparticles were nearly uniform and spherical in shape with diameter in the range of 61–110?nm. XRD confirmed the formation of AgNPs and Ag–O nanoparticles. The nanocomposite films showed good antibacterial activity against Escherichia coli bacteria.     

Ternary composites of multi-wall carbon nanotubes,polyaniline, and noble-metal nanoparticles for potential applications in electrocatalysis

Multi-wall carbon nanotubes were coated with a conducting polymer, polyaniline phosphotungstate. Such composite structures have mixed electronic and proton conductivity, high surface area and porosity. These materials were decorated with catalytically-active noble metals — Pt, Pd, and Rh. Metal nanoparticles were uniformly distributed in the polymer matrix. Such ternary composites can be considered as electrode materials in sensors, electrolysers, supercapacitors, and especially in low-temperature fuel cells with a proton-conducting polymer membrane.     

多尺度结构Ag/PA6纳米纤维膜的制备及其催化性能

随着工业的进步,废水处理特别是印染废水的处理成为亟待解决的问题.银纳米粒子因其特殊的物理化学性能而表现出催化活性,但银纳米粒子的团聚限制了其使用,所以出现了一系列新的载体材料,如微球、薄膜和纤维等.其中电纺纳米纤维由于具有高比表面积,作为载体材料具有非常大的优势,而将常规电纺纳米纤维作为载体也已有报道.但是,将具有更高比表面积的电纺纳米纤维作为载体,特别是一种类似于树枝状结构的多尺度纳米纤维作为载体还鲜有报道.本文制备了一种多尺度结构的PA6纳米纤维膜,该纳米纤维膜由直径为50?120 nm的主纤维和10?50 nm的分支纤维构成;由于分支纤维的出现,多尺度结构纳米纤维膜的比表面积得到了提高,可以为银纳米粒子的负载提供更多附着位点.制备的多尺度结构纳米纤维膜通过银胶溶液浸渍成功地负载银纳米粒子,对制备的纳米纤维膜的形态、化学结构以及对亚甲基蓝的催化性能进行了探讨.SEM,EDS和TEM结果表明,银纳米粒子成功地负载在多尺度结构纳米纤维的表面,并且银纳米粒子的粒径以及负载量可以通过变换银胶溶液的浓度合理调控.此外,与常规PA6纳米纤维膜相比,多尺度结构纳米纤维膜更有利于银纳米粒子的分散,同样通过银胶溶液A浸渍,负载在多尺度结构纳米纤维上银纳米粒子粒径为8.6 nm,而负载在普通PA6纳米纤维上银纳米粒子粒径为11.2 nm.XPS分析表明,银纳米粒子成功地负载到多尺度结构纳米纤维上,并且经不同银胶溶液处理,纳米纤维膜的载银量不同.通过O的高能XPS分析发现,银纳米粒子与PA6分子间形成了配位键,这在一定程度上有利于Ag纳米粒子的固定,阻止了Ag纳米粒子的团聚.Ag/PA6纳米纤维膜以及多尺度结构Ag/PA6纳米纤维膜催化降解实验表明,多尺度结构Ag/PA6纳米纤维膜具有较高的催化活性,反应2 h后对10 mg/L亚甲基蓝的降解率达到98.13%,并且降解过程符合伪一级动力学.不同浸渍液浓度处理纳米纤维膜催化实验表明,Ag纳米粒子的大小以及含量都会影响纳米纤维的催化活性,纳米粒子粒径越小,其催化活性越高;不同NaBH4加入量催化体系催化实验表明,随着NaBH4加入量的增大,催化体系的降解率增高,其对催化体系的催化性能起着至关重要的作用;其他条件一定,随着染料初始浓度的增大,催化体系的催化性能下降;循环实验表明,经5次循环之后,其降解率仍高达83.5%,该纳米纤维膜具有一定的循环使用性能.     

Polyaniline-coated coconut fibers: Structure,properties and their use as conductive additives in matrix of polyurethane derived from castor oil

Electrically conducting fibers based on coconut fibers (CF) and polyaniline (PANI) were prepared through in situ oxidative polymerization of aniline (ANI) in the presence of CF using iron (III) chloride hexahydrate (FeCl_3.6H₂O) or ammonium persulfate (APS) as an oxidant. The PANI-coated coconut fibers (CF-PANI) displayed various morphologies, electrical conductivities and percentages of PANI on the CF surface. For both systems, a PANI conductive layer was present on the CF surface, which was responsible for an electrical conductivity of around 1.5 × 10⁻¹ and 1.9 × 10⁻² S cm⁻¹ for composites prepared with FeCl₃.6H₂O and APS, respectively; values that are similar to that of pure PANI. In order to modify the structure and properties of polyurethane derived from castor oil (PU) both CF-PANI and pure PANI were used as conductive additives. The PU/CF-PANI composites exhibited higher electrical conductivity than pure PU and PU/PANI blends. Additionally, the PU/CF-PANI composites showed a variation in electrical resistivity according to the compressive stress applied, indicating that these materials could be applied for pressure-sensitive applications.     

Significant enhancement of electrical and thermal conductivities of polyethylene carbon nanotube composites by the addition of a low amount of silver nanoparticles

Electrically and thermally conductive high‐density polyethylene composites filled with hybrid fillers, multiwall carbon nanotubes (MWCNTs) and silver nanoparticles (Ag‐NPs), have been prepared in the melt state. The investigation of their electrical and thermal conductivities while comparing with high‐density polyethylene/MWCNT binary composites shows that the addition of only 3 vol% of Ag‐NPs does not reduce the electrical percolation threshold (P_c) that remains as low as 0.40 vol% of MWCNTs but leads to an increase in the maximum dc electrical conductivity of PE/MWCNT composites by two orders of magnitudes. Moreover, the association of both Ag‐NPs and carbon nanotube particles improved our composite's thermal conductivity. Copyright © 2014 John Wiley & Sons, Ltd.     

Complexation of phthalate oxygens in poly(ethylene phthalate) with silver ions and its effect on the formation of silver nanoparticles

The interaction of a phthalate group in poly(ethylene phthalate) (PEP) with silver ion has been elaborated in detail to understand the reduction behavior of silver ions to silver nanoparticles. Previously, the polymer electrolytes consisting of silver ions dissolved in PEP have shown highly stable separation performance for propylene/propane mixtures primarily due to the retardation of the reduction reaction of silver ions to silver nanoparticles, which is possible by means of the chelating bonds between phthalate groups and silver ions. Thus, in this study, the interaction was systematically investigated by both the theoretical ab initio calculation and the experimental Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. The results show that the interaction of silver ion with phthalate group in PEP is approximately two times stronger than that with other functional groups such as amide, ketone, and ester in various polymers, in which the latter ones show the rapid reduction reaction and consequently lose their olefin carrier activity with time. Therefore, it is concluded that the reduction reaction of silver ions to silver nanoparticles is retarded remarkably in PEP/silver salts systems primarily because of the strong interaction between the phthalate group in PEP and silver ion, and consequently the formation of silver nanoparticles would be effectively prohibited, as confirmed by transmission electron microscopy and ultraviolet–visible spectroscopy. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3344–3350, 2004     

Effect of the polymer matrix on the formation of silver nanoparticles in polymer–silver salt complex membranes

When polymer–silver salt complex membranes were exposed to UV irradiation, the separation performances of both the permeance and selectivity for propylene–propane decreased, which was primarily attributed to the reduction of the silver ions in the membranes to silver nanoparticles. Here, the effect of the polymer matrix on the formation of silver nanoparticles in the polymer–silver salt complex membranes was investigated. This effect was assessed for the complexes of two kinds of silver salts (AgBF₄ and AgCF₃SO₃) with several polymeric ligands containing three different carbonyl groups, including poly(vinyl pyrrolidone) (PVP) with an amide group, poly(vinyl methyl ketone) (PVMK) with a ketone group, and poly(methyl methacrylate) (PMMA) with an ester group. UV–vis spectra and transmission electron microscopy (TEM) images clearly indicated that the reduction rate of the silver ions has the following order in the various polymer matrices: PVP > PVMK > PMMA, whereas the size and the distribution of the nanoparticles exhibited the reverse order. The tendency to form silver nanoparticles was explained in terms of the differences between the comparative strengths of the interactions of the silver ions with the different carbonyl oxygens in the matrices, as well as that of the silver ions with counteranions, which was characterized by X‐ray photoelectron spectroscopy (XPS) and FT‐Raman spectroscopy. It was concluded that when the concentration of free silver ions was low due to weak polymer–silver ion and strong silver ion–anion interactions, as found with PMMA, the reduction rate of silver ions to silver nanoparticles was slow. Therefore, the PMMA–silver complex membranes were less sensitive to decreases in separation performance upon UV irradiation than compared to the PVP membranes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1168–1178, 2006     

聚苯胺在防腐领域的应用

综述导电聚苯胺用于金属防腐蚀领域的最新进展,并且探讨了其相关的防腐机理。     

Norvancomycin-capped silver nanoparticles: Synthesis and antibacterial activities against E. coli

The synthesis of norvancomycin (NVan)-capped silver nanoparticles (Ag@NVan) and their notable in vitro antibacterial activities against E. coli, a Gram-negative bacterial strain (GNB), are reported here. Mercaptoacetic acid-stabilized spherical silver nanoparticles with a diameter of 16±4 nm are prepared by a simple chemical reaction. The formation process of the silver nanoparticles is investigated by UV-visible (UV-vis) spectroscopy and transmission electron microscopy (TEM). NVan is then grafted to the terminal carboxyl of the mercaptoacetic acid in the presence of N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDAC). The TEM images of single bacteria treated with Ag@NVan show that plenty of Ag@NVan aggregate in the cell wall of E. coli. A possible antibacterial mechanism is proposed that silver nanoparticles may help destroy the stability of the outer membrane of E. coli, which makes NVan easier to bind to the nether part of the peptidoglycan structure. The antibacterial activities of silver nanoparticles on their own, together with the rigid polyvalent interaction between Ag@NVan and cell wall, enables Ag@NVan to be an effective inhibitor of GNB. This kind of bionanocomposites might be used as novel bactericidal materials and we also provide an effective synthesis method for preparing functional bioconjugated nanoparticles here.     

In situ formation of silver nanoparticles within an amphiphilic graft copolymer film

Silver nanoparticles were prepared by UV irradiation from silver salts, such as AgBF₄ or AgNO₃, when dissolved in an amphiphilic film of poly((oxyethylene)₉ methacrylate)‐graft‐poly((dimethyl siloxane)_n methacrylate), POEM‐g‐mPDMS. The in situ formation of silver nanoparticles in the graft copolymer film was confirmed by transmission electron microscopy (TEM), UV‐visible spectroscopy, and wide angle X‐ray scattering (WAXS). The results demonstrated that the use of AgBF₄ yielded silver nanoparticles with a smaller size (～5 nm) and narrower particle distribution when compared with AgNO₃. The formation of silver nanoparticles was explained in terms of the interaction strength of the silver ions with the ether oxygens of POEM, as revealed by differential scanning calorimetry (DSC) and X‐ray photoelectron spectroscopy (XPS). It was thus concluded that a stronger interaction of silver ions with the ether oxygens results in a more stable formation of silver nanoparticles, which produces uniform and small‐sized nanoparticles. DSC and small angle X‐ray scattering (SAXS) data also showed the selective incorporation and in situ reduction of the silver ions within the hydrophilic POEM domains. Excellent mechanical properties of the nanocomposite films (3–5 × 10⁵ dyn/cm²) were observed, mostly because of the confinement of silver nanoparticles in the POEM chains as well as interfaces created by the microphase separation of the graft copolymer film. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1283–1290, 2007     

Cellulose fibers modified with silver nanoparticles

Cellulose fibers modified with silver nanoparticles were prepared using N-methylmorpholine-N-oxide as a direct solvent and analyzed in this study. Silver nanoparticles were generated as a product of AgNO₃ reduction by means of three methods under varying light conditions (daylight and darkroom). Influence of generating conditions on the size, the type and the number weighting of created nanoparticles was examined. Dynamic Light Scattering technique (DLS) was used for determination of those parameters. DLS analysis showed that the best method, i.e. the one that allowed the generation of the greatest number of silver nanoparticles with the smallest diameter and the smallest agglomerates, was incubation of cellulose pulp with AgNO₃ in a darkroom for 24 h. Mechanical and hydrophilic properties of all obtained fibers were also determined. Results showed that the method of silver nanoparticles generation did not influence significantly mechanical and hydrophilic properties of the modified fibers, because in all cases only small decreases of the studied parameters were observed.     

Norvancomycin-capped silver nanoparticles: Synthesis and antibacterial activities against E. coli

The synthesis of norvancomycin (NVan)-capped silver nanoparticles (Ag@NVan) and their notable in vitro antibacterial activities against E. coli, a Gram-negative bacterial strain (GNB), are reported here. Mercaptoacetic acid-stabilized spherical silver nanoparticles with a diameter of 16±4 nm are prepared by a simple chemical reaction. The formation process of the silver nanoparticles is investigated by UV-visible (UV-vis) spectroscopy and transmission electron microscopy (TEM). NVan is then grafted to the terminal carboxyl of the mercaptoacetic acid in the presence of N-(3-Dimethylaminopropyl)-N′-ethylcarbodiimide hydrochloride (EDAC). The TEM images of single bacteria treated with Ag@NVan show that plenty of Ag@NVan aggregate in the cell wall of E. coli. A possible antibacterial mechanism is proposed that silver nanoparticles may help destroy the stability of the outer membrane of E. coli, which makes NVan easier to bind to the nether part of the peptidoglycan structure. The antibacterial activities of silver nanoparticles on their own, together with the rigid polyvalent interaction between Ag@NVan and cell wall, enables Ag@NVan to be an effective inhibitor of GNB. This kind of bionanocomposites might be used as novel bactericidal materials and we also provide an effective synthesis method for preparing functional bioconjugated nanoparticles here. Supported by the National Natural Science Foundation of China (Grant No. 50373036) and Fok Ying Tung Education Foundation (Grant No. J20040212)     

Voltammetric studies of sumatriptan on the surface of pyrolytic graphite electrode modified with multi-walled carbon nanotubes decorated with silver nanoparticles

Multi-walled carbon nanotube decorated with silver nanoparticles (AgNPs-MWCNT) is used as an effective strategy for modification of the surface of pyrolytic graphite electrode (PGE). This modification procedure improved colloidal dispersion of the decorated MWCNTs in water, affording uniform and stable thin films for altering the surface properties of the working electrode. Robust electrode for sensing applications is obtained in a simple solvent evaporation process. The electrochemical behavior of sumatriptan (Sum) at the bare PGE and AgNPs-MWCNT modified PGE is investigated. The results indicate that the AgNPs-MWCNT modified PGE significantly enhanced the oxidation peak current of Sum. A remarkable enhancement in microscopic area of the electrode together with strong adsorption of Sum on the surface of the modified electrode resulted in a considerable increase in the peak current of Sum. Experimental parameters, such as scan rate, pH, accumulation conditions and amount of the modifier used on the PGE surface are optimized by monitoring the CV responses toward Sum. It is found that a maximum current response can be obtained at pH 7.4 after accumulation at open circuit for 150 s. Further experiments demonstrated that the oxidative peak currents increased linearly with Sum concentration in the range of 8.0 × 10⁻⁸-1.0 × 10⁻⁴ mol L⁻¹ with a detection limit of 4.0 × 10⁻⁸ mol L⁻¹. The modified electrode showed high sensitivity, selectivity, long-term stability and remarkable voltammetric reproducibility in response to Sum. These excellent properties make the prepared sensor suitable for the analysis in pharmaceutical and clinical preparations. The modified electrode was successfully applied for the accurate determination of trace amounts of Sum in pharmaceutical preparations.     

Photoresponsive water‐dispersible polyaniline nanoparticles through template synthesis with copolymer micelle containing coumarin groups

A novel kind of photosensitive water‐dispersible polyaniline (PANI) nanoparticles was designed and prepared by template synthesis using a photo‐responsive vinyl‐coumarin (VM)/2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) copolymer micelle containing coumarin moieties. The resulting PANI nanoparticles exhibited reversible photo‐crosslinking and photo‐decrosslinking behavior similar to coumarin moiety upon irradiation with different UV light as verified by UV–vis absorption. In addition, photoinduced size change of the PANI nanoparticles after 365 nm UV light irradiation was successfully monitored by dynamic light scattering and transmission electron microscopy measurements, further confirming the photosensitivity of the obtained PANI nanoparticles by the incorporation of VM/AMPS copolymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Electrical and humidity sensing properties of synthesized hydrophosphoric acid doped polyaniline

H₃PO₄ doped polyaniline was synthesized by a single‐step chemical polymerization method using ammonium persulfate as an oxidizing agent. The material characterization was done by SEM, UV–vis spectroscopy and thermogravimetric analysis (TGA). The pellets of the synthesized material were used to study the electrical properties, using a four‐probe method. The room temperature electrical conductivity is found to be 0.2201 S/cm. The electrical resistance in response to the varying humid environment (ranging between 20 and 100% RH) is recorded to evaluate the sensitivity of the H₃PO₄ polyaniline samples toward humidity. The resistance of the samples is found to vary by three orders of magnitude for 20–100% RH and is found to decrease with increasing humidity. The response and recovery time are observed to be 12–14 and 26–30 sec, respectively. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Conducting Polyaniline Doped with Polymeric Acids

Conducting polyaniline doped with polymeric acids was synthesized by a in situ chemical polymerization method. The synthesized polymers were characterized by using UV‐Visible, FT‐IR spectroscopy and SEM analysis. Thermal stability of these polymers was evaluated by using TGA/DSC analysis. Among the three polymeric acids used for doping purpose, poly(vinyl sulphonic acid) doped polyaniline is found to be more conducting than those doped with other acids. From the temperature dependent conductivity measurements, an increase in conductivity with increase in temperature was observed.