Determination of flavanol and procyanidin (by degree of polymerization 1-10) content of chocolate, cocoa liquors, powder(s), and cocoa flavanol extracts by normal phase high-performance liquid chromatography: collaborative study

An international collaborative study was conducted on an HPLC method with fluorescent detection (FLD) for the determination of flavanols and procyanidins in materials containing chocolate and cocoa. The sum of the oligomeric fractions with degree of polymerization 1-10 was the determined content value. Sample materials included dark and milk chocolates, cocoa powder, cocoa liquors, and cocoa extracts. The content ranged from approximately 2 to 500 mg/g (defatted basis). Thirteen laboratories representing commercial, industrial, and academic institutions in six countries participated in the study. Fourteen samples were sent as blind duplicates to the collaborators. Results from 12 laboratories yielded repeatability relative standard deviation (RSDr) values that were below 10% for all materials analyzed, ranging from 4.17 to 9.61%. The reproducibility relative standard deviation (RSD(R)) values ranged from 5.03 to 12.9% for samples containing 8.07 to 484.7 mg/g. In one sample containing a low content of flavanols and procyanidins (approximately 2 mg/g), the RSD(R) was 17.68%. Based on these results, the method is recommended for Official First Action for the determination of flavanols and procyanidins in chocolate, cocoa liquors, powder(s), and cocoa extracts.     

Determination of beta-carotene in supplements and raw materials by reversed-phase high pressure liquid chromatography: collaborative study

Twelve laboratories representing 4 countries participated in an interlaboratory study conducted to determine all-trans-veta-carotene and total beta-carotene in dietary supplements and raw materials. Thirteen samples were sent as blind duplicates to the collaborators. Results obtained from 11 laboratories are reported. For products composed as softgels and tablets that were analyzed for total beta-carotene, the reproducibility relative standard deviation (RSDR) ranged from 3.35 to 23.09% and the HorRat values ranged from 1.06 to 3.72. For these products analyzed for trans beta-carotene, the reproducibility relative standard deviation (RSDR) ranged from 4.28 to 22.76% and the HorRat values ranged from 0.92 to 3.37. The RSDr and HorRat values in the analysis of a beadlet raw material were substantial and it is believed that the variability within the material itself introduced significant variation in subsampling. The method uses high pressure liquid chromatography (LC) in the reversed-phase mode with visible light absorbance for detection and quantitation. If high levels of alpha-carotenes are present, a second LC system is used for additional separation and quantitation of the carotene species. It is recommended that the method be adopted as an AOAC Official Method.     

Gravimetric determination of amylase-treated neutral detergent fiber in feeds with refluxing in beakers or crucibles: collaborative study

As an important constituent of animal feeds, fiber represents the portion of feeds that is bulky and difficult to digest. The neutral detergent fiber (NDF) method, developed over 30 years ago, is the method of choice for measuring total fiber in forages and other feeds. Several modifications that were made to improve its general applicability to all feeds and others developed in individual laboratories often resulted in variability among laboratories in measuring NDF. The amylase-treated NDF (aNDF) method, therefore, was developed as an accurate and precise method of measuring total insoluble fiber in feeds. A collaborative study was conducted to evaluate the repeatability and reproducibility of the aNDF method over the full range of animal feed materials. Twelve laboratories representing research, feed company, regulatory, and commercial feed testing laboratories analyzed 11 materials as blind duplicates. The materials represented feed matrixes, including animal products; high-protein, high-fat, and high-pectin feeds; oil seeds; grains; heated by-product feeds; and legume and grass hays and silages. Materials selected varied in chemical composition and contained 0-90% aNDF, 1-16% ash, 1-20% crude fat, 1-40% crude protein, and 0-50% starch. Correcting results for changes in blanks and reporting results as ash-free aNDF organic matter (aNDFom) improved the repeatability and reproducibility of results when aNDF was <25%. The within-laboratory repeatability standard deviation (Sr) for percentage aNDFom in feeds varied from 0.21 to 1.82 and among-laboratory reproducibility standard deviation (S(R)) varied from 0.37 to 2.24. The HORRAT was <2 for all materials except feed materials containing >10% fat. However, standard deviations of repeatability and reproducibility for feeds with >10% fat were similar to those of other materials. It is recommended that the aNDF method be accepted for Official First Action status.     

Determination of coenzyme Q10 content in raw materials and dietary supplements by high-performance liquid chromatography-UV: collaborative study

An international collaborative study was conducted of a high-performance liquid chromatographic (HPLC)-UV method for the determination of coenzyme Q10 (CoQ10, ubidecarenone) in raw materials and dietary supplements. Ten collaborating laboratories determined the total CoQ10 content in 8 blind duplicate samples. Sample materials included CoQ10 raw material and 4 finished product dietary supplements representing softgels, hardshell gelatin capsules, and chewable wafers. In addition, collaborating laboratories received a negative control and negative control spiked with CoQ10 at low and high levels to determine recovery. Materials were extracted with an acetonitrile-tetrahydrofuran-water mixture. Ferric chloride was added to the test solutions to ensure all CoQ10 was in the oxidized form. The HPLC analyses were performed on a C18 column using UV detection at 275 nm. Repeatability relative standard deviations (RSDr) ranged from 0.94 to 5.05%. Reproducibility relative standard deviations (RSDR) ranged from 3.08 to 17.1%, with HorRat values ranging from 1.26 to 5.17. Recoveries ranged from 74.0 to 115%. Based on these results, the method is recommended for Official First Action for determination of CoQ10 in raw materials and dietary supplement finished products containing CoQ10 at a concentration of >100 mg CoQ10/g test material.     

Determination of the total nitrogen content of hard, semihard, and processed cheese by the Kjeldahl method: collaborative study

The objective of this collaborative study was to determine interlaboratory performance statistics for a modified and optimized version of AOAC Method 920.123 for the determination of the total nitrogen content of hard, semihard, and processed cheese by Kjeldahl analysis. Details included addressing the issues of material homogeneity, test portion size (1 g), quantitative transfer (weighing on to filter paper), ensuring system suitability (nitrogen recoveries), and using AOAC Method 991.20 as the basis for nitrogen analysis. Fifteen laboratories tested 18 pairs of blind duplicate cheese materials with a crude protein content between 18 and 36%. Materials represented hard, semihard, and processed commercial cheeses with a wide range of composition. Statistical performance parameters expressed as crude protein (nitrogen x 6.38), g/100 g, with invalid and outlier data removed were mean = 26.461, repeatability standard deviation (Sr) 0.111, reproducibility standard deviation (S(R)) = 0.153, repeatability relative standard deviation (RSDr) = 0.42%, reproducibility relative standard deviation (RSDR) = 0.58%, repeatability (r) = 0.312, and reproducibility (R) = 0.428. The interlaboratory study results were acceptable and comparable to those for the milk Kjeldahl nitrogen method on a relative nitrogen basis. The Study Directors recommend that this modified method for the determination of total nitrogen in hard, semihard, and processed cheese by Kjeldahl analysis be adopted First Action as an improved method to replace Method 920.123.     

Immunoaffinity column cleanup with liquid chromatography for determination of aflatoxin B1 in corn samples: interlaboratory study

An interlaboratory study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for the determination of aflatoxin B1 levels in corn samples, enforced by European Union legislation. A test portion was extracted with methanol-water (80 + 20); the extract was filtered, diluted with phosphate-buffered saline solution, filtered on a microfiber glass filter, and applied to an immunoaffinity column. The column was washed with deionized water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. Aflatoxin B1 was separated and determined by reversed-phase LC with fluorescence detection after either pre- or postcolumn derivatization. Precolumn derivatization was achieved by generating the trifluoroacetic acid derivative, used by 8 laboratories. The postcolumn derivatization was achieved either with pyridinium hydrobromide perbromide, used by 16 laboratories, or with an electrochemical cell by the addition of bromide to the mobile phase, used by 5 laboratories. The derivatization techniques used were not significantly different when compared by the Student's t-test; the method was statistically evaluated for all the laboratories. Five corn sample materials, both spiked and naturally contaminated, were sent to 29 laboratories (22 Italian and 7 European). Test portions were spiked with aflatoxin B1 at levels of 2.00 and 5.00 ng/g. The mean values for recovery were 82% for the low level and 84% for the high contamination level. Based on results for spiked samples (blind pairs at 2 levels) as well as naturally contaminated samples (blind pairs at 3 levels), the values for relative standard deviation for repeatability (RSDr) ranged from 9.9 to 28.7%. The values for relative standard deviation for reproducibility (RSDR) ranged from 18.6 to 36.8%. The method demonstrated acceptable within- and between-laboratory precision for this matrix, as evidenced by the HorRat values.     

Determination of glucosamine in raw materials and dietary supplements containing glucosamine sulfate and/or glucosamine hydrochloride by high-performance liquid chromatography with FMOC-Su derivatization: collaborative study

A collaborative study was conducted for determination of glucosamine in raw materials and dietary supplements containing glucosamine sulfate and/or glucosamine hydrochloride by high-performance liquid chromatography (HPLC) with N-(9-fluorenyl-methoxycarbonyloxy) succinimide (FMOC-Su) derivatization. Thirteen blind materials, one pair of which were duplicates, were tested by 12 collaborating laboratories. The test samples consisted of various commercial products, including tablets, capsules, drink mix, and liquids as well as raw materials, blanks, and those for spike recovery analyses. The tests with blank products and products spiked with glucosamine showed good specificity of the method. The average recoveries at spike levels of 100 and 150% of the declared amount were 99.0% with a relative standard deviation (RSD) of 2.1%, and 101% with an RSD of 2.3%, respectively. The test results between laboratories on each commercial product were reproducible with RSD values of no more than 4.0%, and the results were repeatable in the same laboratory with an average RSD of 0.7%. HorRat values ranged from 0.5 to 1.7 on both tests of spike recovery and reproducibility between laboratories on commercial products. The average determination coefficient of the calibration curves from the laboratories was 0.9995 with an RSD of 0.03%. All of the 12 collaborating laboratories succeeded in the study and none of their reported test results were outliers, partly indicating the robustness of the method. It is recommended that the method be accepted by AOAC INTERNATIONAL as Official First Action.     

Liquid chromatographic analysis of vitamin B6 in reconstituted infant formula: collaborative study

A liquid chromatographic (LC) method was validated for the determination of total vitamin B6 in infant formula. Total vitamin B6 was quantified by converting the phosphorylated and free vitamers into pyridoxine. Pyridoxine was determined by ion pair reversed-phase LC with fluorescence detection. The method was subjected to an AOAC collaborative study involving a factory-manufactured, milk- and soy-based infant formula. Each was spiked at 3 concentrations in the range of 0-1 microg/g and sent as blind duplicate to participant laboratories. Nine laboratories returned valid data which were statistically analyzed for outliers and precision parameters. The repeatability relative standard deviation (RSD(r)) ranges were 2.0-4.0 and 3.5-5.9% for fortified milk- and soy-based formulas, respectively. The reproducibility relative standard deviation (RSD(R)) ranges were 8.2-8.4 and 6.7-11.2% for fortified milk- and soy-based formulas, respectively. HORRAT values ranged from 0.42 to 0.53, indicating that the precision of the method is acceptable. The mean RSD(r):RSD(R) values were 0.60 and 0.55 for milk- and soy-based formulas, respectively. As expected, RSDs for the unfortified samples were higher, but their HORRAT values (0.81 and 2.06) helped define a realistic limit of quantitation as 0.05 microg/g. Recovery data were quantitative and varied between 81.4 and 98.0% (mean = 89.8%) for each of 6 spiked materials.     

Determination of neutral lactase activity in industrial enzyme preparations by a colorimetric enzymatic method: collaborative study

Thirteen laboratories participated in a collaborative study to validate a colorimetric assay for determining neutral lactase activity in industrial enzyme preparations. Each laboratory received 5 duplicate samples with activity levels of 2000 and 5000 neutral lactase units provided by 4 commercial suppliers. Two laboratories did not return results. Method performance was calculated according to AOAC guidelines. From the 11 remaining laboratories, 3 were excluded from statistical analysis because of invalid data determined during initial review by Youden pair, value versus laboratory. Repeatability relative standard deviation (RSDr) values ranged from 3.20 to 8.62%, and reproducibility relative standard deviation (RSDR) values ranged from 8.77 to 16.35%. With outliers excluded, RSDr values ranged from 2.94 to 5.01%, and RSDR values ranged from 7.50 to 13.84%. The colorimetric enzymatic method for determining neutral lactase activity in industrial enzyme preparations has been adopted first action by AOAC INTERNATIONAL.     

Measurement of resistant starch by enzymatic digestion in starch and selected plant materials: collaborative study

Interlaboratory performance statistics was determined for a method developed to measure the resistant starch (RS) content of selected plant food products and a range of commercial starch samples. Food materials examined contained RS (cooked kidney beans, green banana, and corn flakes) and commercial starches, most of which naturally contain, or were processed to yield, elevated RS levels. The method evaluated was optimized to yield RS values in agreement with those reported for in vivo studies. Thirty-seven laboratories tested 8 pairs of blind duplicate starch or plant material samples with RS values between 0.6 (regular maize starch) and 64% (fresh weight basis). For matrixes excluding regular maize starch, repeatability relative standard deviation (RSDr) values ranged from 1.97 to 4.2%, and reproducibility relative standard deviation (RSDR) values ranged from 4.58 to 10.9%. The range of applicability of the test is 2-64% RS. The method is not suitable for products with <1% RS (e.g., regular maize starch; 0.6% RS). For such products, RSDr and RSDR values are unacceptably high.     

Graphite furnace atomic absorption spectrometric determination of lead and cadmium extracted from ceramic foodware: Collaborative Study

A modification of the official flame atomic absorption spectrometric (FAAS) method for determining lead and cadmium extracted from ceramic foodware was collaboratively studied. In the modified method, graphite furnace atomic absorption spectrometry (GFAAS) is substituted for FAAS. The modified method also includes mandatory quality control procedures to improve method performance. The extraction procedure of the official method (leaching with 4% acetic acid for 24 h at room temperature) remains unchanged. Seven laboratories analyzed blind duplicate portions of 3 ceramicware leach solutions containing Pb at concentrations of 0.0196, 0.403, and 3.73 microg/mL and Cd at concentrations of 0.00236, 0.0456, and 0.544 microg/mL. Performance of the modified method compared well with that of the official method. The repeatability relative standard deviation (RSDr) ranged from 0.87 to 6.7% for Pb and from 3.7 to 11% for Cd. The reproducibility relative standard deviation (RSDR) ranged from 4.5 to 12% for Pb and from 7.0 to 11% for Cd. Accuracy of collaborator results was 97-98% for Pb and 93-101% for Cd. Quality control results and quantitation limits were excellent. Method quantitation limits varied among laboratories from 0.005 to 0.019 microg/mL for Pb and from 0.0004 to 0.0019 microg/mL for Cd. The modified method was adopted First Action by AOAC INTERNATIONAL.     

Determination of arsenic, cadmium, mercury, and lead by inductively coupled plasma/mass spectrometry in foods after pressure digestion: NMKL interlaboratory study

Thirteen laboratories participated in an interlaboratory method performance (collaborative) study on a method for the determination of arsenic, cadmium, mercury, and lead by inductively coupled plasma/mass spectrometry (ICP/MS) after pressure digestion including the microwave heating technique. Prior to the study, the laboratories were able to practice on samples with defined element levels (pretrial test). The method was tested on a total of 7 foodstuffs: carrot puree, fish muscle, mushroom, graham flour, simulated diet, scampi, and mussel powder. The elemental concentrations in mg/kg dry matter (dm) ranged from 0.06-21.4 for As, 0.03-28.3 for Cd, 0.04-0.6 for Hg, and 0.01-2.4 for Pb. The materials used in the study were presented to the participants as blind duplicates, and the participants were asked to perform single determinations on each sample. The repeatability relative standard deviations (RSDr) for As ranged from 3.8 to 24%, for Cd from 2.6 to 6.9%, for Hg from 4.8 to 8.3%, and for Pb from 2.9 to 27%. The reproducibility relative standard deviations (RSDR) for As ranged from 9.0 to 28%, for Cd from 2.8 to 18%, for Hg from 9.9 to 24%, and for Pb from 8.0 to 50%. The HorRat values were less than 1.5 for all test samples, except for the determination of Pb in wheat flour at a level close to the limit of quantitation (0.01 mg/kg dm). The study showed that the ICP/MS method is satisfactory as a standard method for elemental determinations in foodstuffs.     

Determination of lead, cadmium, zinc, copper, and iron in foods by atomic absorption spectrometry after microwave digestion: NMKL Collaborative Study

A method for determination of lead, cadmium, zinc, copper, and iron by atomic absorption spectrometry (AAS) after microwave digestion was subjected to a collaborative study in which 16 laboratories participated [including users of inductively coupled plasma (ICP) and ICP-mass spectrometry (MS)]. The types of samples included in the study were minced fish, wheat bran, milk powder, bovine and pig liver, mushroom, 2 simulated diets, and bovine muscle; the last 4 were certified reference materials. These were analyzed as single (4 samples), double blind (1 sample), or split level (2 samples) samples. Before the collaborative study, a pretrial was conducted in which 4 ready-made solutions and one fish tissue sample were analyzed for Pb and Cu. The reproducibility relative standard deviation (RSDR) values, for results above the detection limit, ranged from 59% at 0.155 mg/kg to 16% at 1.62 mg/kg for Pb, from 28% at 0.0124 mg/kg to 11% at 0.482 mg/kg for Cd, from 9.3% at 35.3 mg/kg to 1.7% at 147 mg/kg for Zn, from 39% at 0.241 mg/kg to 3.0% at 63.4 mg/kg for Cu, and from 17% at 7.4 mg/kg to 5.9% at 303 mg/kg for Fe. The RSDR values agreed well with the norms described by the International Union of Pure and Applied Chemistry. As a complement to the AAS determinations, a number of laboratories analyzed the samples either by ICP or by ICP-MS. The results of these analyses agreed well with the AAS results. On the basis of the results of the collaborative study, the method was adopted Official First Action by AOAC INTERNATIONAL.     

Determination of clopidol residues in chicken tissues by liquid chromatography: collaborative study

Eighteen laboratories participated in a collaborative study on the determination of clopidol residues in chicken muscle tissues by liquid chromatography. Of these, results from 16 laboratories which rigorously followed the method were subjected to statistical analysis. The method performance was assessed by all participants using 14 samples of chicken muscle fortified at concentrations ranging from 0.1 to 5.0 mg/kg. In addition, 9 participants each reported results for 6 clopidol-incurred samples in chicken muscle. Test portions were extracted with acetonitrile, and the extracts were purified with alumina and anion exchange resin solid-phase extraction cartridges in sequence. Clopidol was separated by reversed-phase liquid chromatography and quantified at 270 nm. Average recoveries ranged from 81.8 to 85.4%, reproducibility relative standard deviation (RSDR) ranged from 11.9 to 22.6%, and repeatability relative standard deviation (RSDr) ranged from 9.9 to 15.1%. For clopidol-incurred samples at concentrations of 0.100-0.687 mg/kg, the mean determination value range was 0.099-0.659 mg/kg; RSDR was 12.6-19.8%, RSDr was 3.1-8.5%; and HORRAT values were 0.7-1.1. The accuracy and precision of the method are in conformity with the requirements specified by AOAC INTERNATIONAL. The method was adopted Official First Action in April 2003.     

Determination of percentage of RoundUp Ready soya in soya flour using real-time polymerase chain reaction: interlaboratory study

An interlaboratory study was conducted to evaluate a method for determination of the percentage of RoundUp Ready (RR) soya in soya flour using Taqman technology. The method included DNA extraction from the test portion with cetyltrimethylammonium bromide buffer followed by chloroform extraction and Wizard resin cleanup steps. The DNA was then assayed with primer and probe sets specific for lectin as the endogenous control and the RR insert as the target. The percentage of RR soya in the soya fraction of the sample was calculated by using a matrix-matched standard curve. Ten samples of split-level blind duplicates were sent to 22 laboratories in 12 countries worldwide. Test portions contained 0, 0.5, 0.7,1.6, 2, and 3.9% (w/w) RR soya prepared gravimetrically from commercially available RR standard reference materials. Based on the results for test materials, the relative standard deviation for repeatability (RSDr) for the method ranged from 9.3 to 19.3% and, for reproducibility (RSDR), ranged from 20.3 to 33.7%.     

Liquid chromatographic determination of ampicillin residues in porcine muscle tissue by a multipenicillin analytical method: European Collaborative Study

A collaborative study involving 14 laboratories was conducted to determine residues of ampicillin in porcine muscle tissue by using a liquid chromatographic method developed for multipenicillin analysis that can quantitate 8 penicillin compounds (benzylpenicillin, phenoxymethylpenicillin, ampicillin, amoxicillin, nafcillin, oxacillin, cloxacillin, and dicloxacillin) at trace levels in muscle tissue. This method involves extraction of the penicillins with phosphate buffer, pH 9, followed by cleanup and concentration on a C18 solid-phase extraction column and reaction with benzoic anhydride at 50 degrees C and with 1,2,4-triazole and mercury(II) chloride solution, pH 9.0, at 65 degrees C. The derivatized compounds are eluted isocratically on a C8 column with a mobile phase of acetonitrile and phosphate buffer (pH 6; 0.1 M) containing sodium thiosulfate and the ion-pair reagent tetrabutylammonium hydrogen sulfate. The penicillins are detected by UV absorption at 325 nm. The limit of detection and the limit of determination (quantitation) of the method were calculated to be approximately 3-5 and 25 microg/kg, respectively, in accordance with the criteria of European Union (EU) Decision No. 93/256/EEC. In this first interlaboratory study, collaborators were instructed to monitor 4 different penicillin compounds (benzylpenicillin, phenoxymethylpenicillin, ampicillin, and amoxicillin) by analyzing 8 blind samples of muscle tissue in triplicate. These samples were prepared from 2 materials containing different concentrations of incurred ampicillin (63.5 microg/kg for material No. 1 and 358.1 microg/kg for material No. 2) and 1 blank material. The repeatability relative standard deviation and the reproducibility relative standard deviation were 10.2 and 17.4%, respectively, for material No. 1 and 7.0 and 16.0%, respectively, for material No. 2. These results demonstrate that the method is suitable for the determination of ampicillin residues in muscle tissue at the EU maximum residue limit (50 microg/kg) and above. However, the identification of positives by this procedure may need additional confirmation by techniques with greater specificity, such as liquid chromatography combined with mass spectrometry, or tandem mass spectrometry. Investigations regarding the basis of interlaboratory testing studies will further demonstrate the suitability of multiresidue methodology for detecting and quantitating other compounds in the family of penicillin antibiotics.     

Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit, and dried figs by immunoaffinity column cleanup with liquid chromatography: interlaboratory study

An interlaboratory study was performed on behalf of the Food Standards Agency to evaluate the effectiveness of an affinity column cleanup liquid chromatographic (LC) method for the determination of ochratoxin A in a variety of dried fruit at European regulatory limits. To ensure homogeneity before analysis, laboratory samples are normally slurried with water in the ratio of 5 parts fruit to 4 parts water, and test materials in this form were used in the study. The test portion was extracted with acidified methanol. The extract was filtered, diluted with phosphate-buffered saline, and applied to an affinity column. The column was washed and ochratoxin A was eluted with methanol. Ochratoxin A was quantified by reversed-phase LC. The use of post-column pH shift to enhance the fluorescence of ochratoxin A by the addition of 1.1 M ammonia solution to the column eluant is optional. Determination was by fluorescence. Currants, sultanas, raisins, figs, and mixed fruit (comprising dried pineapple, papaya, sultanas, prunes, dates, and banana chips), both naturally contaminated and blank (very low level), were sent to 24 collaborators in 7 European countries. Participants were asked to spike test portions of all test samples at a level equivalent to 5 ng/g ochratoxin A. Average recoveries ranged from 69 to 74%. Based on results for 5 naturally contaminated test samples (blind duplicates) the relative standard deviation for repeatability (RSDr) ranged from 4.9 to 8.7%, and the relative standard deviation for reproducibility (RSDR) ranged from 14 to 28%. The method showed acceptable within- and between-laboratory precision for all 5 matrixes, as evidenced by HORRAT values <1.3.     

Immunoaffinity column cleanup with liquid chromatography using post-column bromination for determination of aflatoxin B1 in cattle feed: collaborative study

A collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for determination of aflatoxin B1 in cattle feed at a possible future European regulatory limit (1 ng/g). The test portion was extracted with acetone-water (85 + 15), filtered, diluted with water, and applied to an immunoaffinity column. The column was washed with water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. Aflatoxin B1 was separated and determined by reversed-phase liquid chromatography (RP-LC) and detected by fluorescence after post column derivatization (PCD) involving bromination. PCD was achieved with either pyridinium hydrobromide perbromide (PBPB), used by 14 laboratories, or an electrochemical cell and addition of bromide to the mobile phase, used by 7 laboratories. Both derivatization techniques were not significantly different when compared by the t-test; the method was statistically evaluated for all laboratories together (bromination and PBPB). The cattle feed samples, both spiked and naturally contaminated with aflatoxin B1, were sent to 21 laboratories in 14 different countries (United States, Japan, and Europe). Test portions were spiked at levels of 1.2 and 3.6 ng/g for aflatoxin B1. Recoveries ranged from 74 to 157%. Based on results for spiked samples (blind pairs at 2 levels) as well as naturally contaminated samples (blind pairs at 3 levels), the relative standard deviation for repeatability (RSDr) ranged from 5.9 to 8.7%. The relative standard deviation for reproducibility (RSDR) ranged from 17.5 to 19.6%. The method showed acceptable within- and between-laboratory precision for this matrix, as evidenced by HORRAT values, at the target levels of determination for aflatoxin B1. No major differences in RSD were observed, showing that the composition of the feeds was not a factor for the samples tested and that the method was applicable for all materials used.     

Determination of 1,3-dichloropropanol in soy sauce and related products by headspace gas chromatography with mass spectrometric detection: interlaboratory study

An interlaboratory study was performed to evaluate the effectiveness of a headspace gas chromatography (GC) method for the determination of 1,3-dichloro-propan-2-ol (1,3-DCP) in soy sauce and related products at levels above 5 ng/g. The test portion is mixed with an internal standard (d5-1,3-DCP) and ammonium sulfate in a sealed headspace vial. After achieving equilibrium, the headspace is sampled either by gas-tight syringe or solid-phase microextraction (SPME) and analyzed by GC with mass spectrometric detection. 1,3-DCP is detected in the selected-ion mode (monitoring m/z 79 and 81 for 1,3-DCP and m/z 82 for the deuterated internal standard) and quantified by measurement against standards. Test materials comprising soy, dark soy, mushroom soy, and teriyaki sauces, both spiked and naturally contaminated, were sent to 9 laboratories in Europe, Japan, and the United States; of these, 5 used SPME and 4 used syringe headspace analysis. Test portions were spiked at 5.0, 10.0, 20.0, 100.0, and 500.0 ng/g. The average recovery for spiked blank samples was 108% (ranging from 96-130%). Based on results for spiked samples (blind pairs at 5, 10, 20, 100, and 500 ng/g) as well as a naturally contaminated sample (split-level pair at 27 and 29 ng/g), the relative standard deviation for repeatability (RSDr) ranged from 2.9-23.2%. The relative standard deviation for reproducibility (RSDR) ranged from 20.9-35.3%, and HorRat values of between 1.0 and 1.6 were obtained.