Effect of proton donors on direct electron transfer in the system gold electrode–horseradish peroxidase

The effect of proton donors (PD) on the direct electron transfer (ET) reaction between polycrystalline Au electrodes and horseradish peroxidase (HRP) was investigated. HRP was immobilised directly on the bare Au surface. The pH of the contacting solution was varied at a constant ionic strength and the following different PDs were used as additives: H₃O⁺, NH₄⁺, [La(H₂O)]³⁺, [Y(H₂O)]³⁺, [Lu(H₂O)]³⁺. The kinetics of the bioelectrocatalytic reduction of H₂O₂ catalysed by HRP was studied with linear sweep voltammetry (LSV) in the potential range from 700 to −100 mV vs. SCE as well as amperometrically at −50 mV vs. Ag|AgCl with the HRP-modified Au electrodes placed in a wall-jet flow through electrochemical cell. An increase of [H₃O⁺] results in an enhancement of the current of the bioelectroreduction of H₂O₂ due to a more facilitated direct ET between Au and the enzyme over the potential range involved. It is shown that at high overvoltages (E<0.4 V) the PDs do not affect the rate of the enzymatic reduction of H₂O₂ but rather increase significantly the rate of direct ET between Au and HRP and the efficiency of acting as a PD is strongly correlated with their PD properties. The dependence of the apparent heterogeneous rate constant of direct ET, k_s, on [H₃O⁺] makes it possible to suggest that the reaction mechanism involves the participation of a proton in the elementary step of the charge transfer.     

Direct and mediated electron transfer catalyzed by anionic tobacco peroxidase

The properties of anionic tobacco peroxidase (TOP) adsorbed on graphite electrode have been studied in direct and mediated electron transfer in a wall-jet flow injection system. The percentage of tobacco peroxidase molecules active in directelectron transfer is about 83%, which is higher than that for horeradish peroxidase (40–50%). This observation is explained in terms of the lower degree of glycosylation of TOP compared with horseradish peroxidase and, therefore, a reduced in terference from the oligosaccharide chains with direct electron transfer. Calcium ions cause an 11% drop in the reaction rate constant toward hydrogen peroxide. The detection limit of calcium chloride has been estimated as 5 m M. The results obtained by means of bioeletrochemistry, stopped-flow kinetics, and structural modeling provide evidence for the interaction between calcium cations and negatively charged residues at the distal domain (Glu-141, heme propionates, Asp-79, Asp-80) blocking the activesite. The observation that both soluble and immobilized enzyme under go conformational changes resulting in the blockade of the active site indicates that the immobilized enzyme preserves conformational flexibility. An even stronger suppressing effect of calcium ions on the rate constant for mediated electron transfer was observed. In the case of direct electron transfer, this couldmean that there is nodirect contact between the electrode and the active site of TOP. The electrons are shuttled from the active site to the surface of the electrode through electron transfer pathways in the protein globule that are sensitive to protein conformational changes.     

Direct electrochemistry and spectroelectrochemistry of osmium substituted horseradish peroxidase

In this contribution the substitution of the central protoporphyrin IX iron complex of horseradish peroxidase by the respective osmium porphyrin complex is described. The direct electrochemical reduction of the Os containing horseradish peroxidase (OsHRP) was achieved at ITO and modified glassy carbon electrodes and in combination with spectroscopy revealed the three redox couples Os^IIIHRP/Os^IVHRP, Os^IVHRP/Os^VHRP and Os^VHRP/Os^VIHRP. The midpoint potentials differ dependent on the electrode material used with E_1/2 (Os^III/IV) of − 0.4 V (ITO) and − 0.25 V (GC), E_1/2 (Os^IV/^V) of − 0.16 V (ITO) and + 0.10 V (GC), and E_1/2 (Os^V/VI)of + 0.18 V (ITO), respectively. Moreover, with immobilised OsHRP the direct electrocatalytic reduction of hydrogen peroxide and tert-butyl hydroperoxide was observed. In comparison to electrodes modified with native HRP the sensitivity of the OsHRP-electrode for tert-butyl hydroperoxide is higher.     

Self-assembly of anisotropic tobacco mosaic virus nanoparticles on gold substrate

A facile approach to assembled virus film with tunable structure is presented.Rod-like tobacco mosaic virus (TMV) was selected as the prototype in this study for its anisotropic structural feature.TMV can either lie down or stand up on gold substrate by tuning the solution pH.A quartz crystal microbalance with dissipation monitoring was used to monitor the pH-dependent self-assembly behavior of TMV nanoparticles,and atomic force microscopy and single molecule force spectroscopy further confirmed the differe...     

Direct electrochemistry and electrocatalysis of cytochrome c immobilized on gold nanoparticles-chitosan-carbon nanotubes-modified electrode

A robust and effective nanohybrid film based on gold nanoparticles (GNPs)/chitosan (Chit)/multi-walled carbon nanotubes (MWNTs) was prepared by a layer-by-layer self-assembly technique. Cytochrome c (Cyt c) was successfully immobilized on the nanohybrid film modified glassy carbon (GC) electrode by cyclic voltammetry. The direct electron transfer between Cyt c and the modified electrode was investigated in detail. Cyt c shows a couple of quasi-reversible and well-defined cyclic voltammetry peaks with a formal potential (E^0′) of −0.16 V (versus Ag/AgCl) in pH 7.0 phosphate buffer solution (PBS). The Cyt c/GNPs/Chit/MWNTs modified GC electrode gives an improved electrocatalytic activity towards the reduction of hydrogen peroxide (H₂O₂). The sensitivity is 92.21 μA mM⁻¹ cm⁻² and the calculated apparent Michaelis-Menten constant () is 0.791 mM, indicating a high-catalytic activity of Cyt c. The catalysis currents increase linearly to the H₂O₂ concentration in a wide range of 1.5 × 10⁻⁶ to 5.1 × 10⁻⁴ M with a correlation coefficient 0.999. The detection limit is 9.0 × 10⁻⁷ M (at the ratio of signal to noise, S/N = 3). Moreover, the modified electrode displays rapid response (5 s) to H₂O₂, and possesses good stability and reproducibility.     

Direct electrochemistry behavior of Cytochrome c on silicon dioxide nanoparticles-modified electrode

A newfangled direct electrochemistry behavior of Cytochrome c (Cyt c) was found on glassy carbon (GC) electrode modified with the silicon dioxide (SiO2) nanoparticles by physical adsorption. A pair of stable and well-defined redox peaks of Cyt c′ quasi-reversible electrochemical reaction were obtained with a heterogeneous electron transfer rate constant of 1.66×10-3 cm/s and a formal potential of 0.069 V (vs. Ag/AgCl) (0.263 V versus NHE) in 0.1 mol/L pH 6.8 PBS. Both the size and the amount of SiO2 nanoparticles could influence the electron transfer between Cyt c and the electrode. Electrostatic interaction which is between the negative nanoparticle surface and positively charged amino acid residues on the Cyt c surface is of importance for the stability and reproducibility toward the direct electron transfer of Cyt c. It is suggested that the modification of SiO2 nanoparticles proposes a novel approach to realize the direct electrochemistry of proteins.     

Quartz crystal microbalance biosensor for recombinant human interferon-beta detection based on antisense peptide approach

Quartz crystal microbalance (QCM) biosensors for recombinant human interferon-β (rhIFN-β) were constructed by utilizing antisense peptides adhering to the QCM gold surfaces. Two antisense peptides, both corresponding to the N-terminal fragment 1-14 of rhIFN-β, were used in this study. Antisense peptide AS-1 was the original antisense peptide and AS-2 was the modified antisense peptide based on the antisense peptide degeneracy. Both antisense peptides were immobilized on the gold electrodes of piezoelectric crystals, respectively, via a self-assembling monolayer of 1,2-ethanedithiol. The binding affinity between rhIFN-β and each immobilized antisense peptide in solution was evaluated using a quartz crystal microbalance-flow injection analysis (QCM-FIA) system. The dissociation constant of rhIFN-β on the antisense peptide AS-1 and AS-2 biosensor was (1.89 ± 0.101) × 10⁻⁴ and (1.22 ± 0.0479) ×10⁻⁵ mol L⁻¹, respectively. The results suggested that AS-2 had a higher binding affinity to rhIFN-β than AS-1. The detection for rhIFN-β using each biosensor was precise and reproducible. The linear response ranges of rhIFN-β binding to both biosensors were same with a concentration range of 0.12-0.96 mg mL⁻¹. The results demonstrated the successful construction of highly selective QCM biosensors using antisense peptide approach, and also confirmed the feasibility of increasing antisense peptide binding affinity by appropriate sequence modification.     

Antibody immobilization to phospholipid polymer layer on gold substrate of quartz crystal microbalance immunosensor

To modify gold electrode for immunosensor to construct an artificial cell membrane structure, water-soluble amphiphilic phospholipid polymer, poly[2-methacryloyloxyehtyl phosphorylcholine-co-n-butyl methacrylate-co-p-nitrophenyloxycarbonyl poly(ethylene glycol) methacrylate (PMBN)] was applied. The polymer had active ester groups for immobilization of biomolecules and it was converted partially to thiol groups for binding to gold substrates. The partially thiolated PMBN was adsorbed on a gold electrode of quartz crystal microbalance (QCM). Surface characterization of adsorbed PMBN layers was thoroughly investigated with reflectance anisotropy spectroscopy, ellipsometry spectroscopy, dynamic contact angle and X-ray photoelectron spectroscopy measurements. Among several PMBN, having different degree of thiolation, it was concluded that 21.5% thiolated PMBN layer had the most well-ordered phosphorylcholine groups in its outer surface. The proteins adsorption test revealed that the phosphorylcholine group on the outer side of PMBN layers, which was substituted their active ester groups by glycine, showed suppress the non-specific adsorption of proteins, such as bovine serum albumin and γ-globulin. Also, through antigen–antibody binding evaluation, the anti-C-reactive protein antibody immobilized on the PMBN surface worked well and it was confirmed that denaturation of the antibody on the PMBN layers was hardly occurred in spite of 60 days storage at 4 °C. The antibody conjugated phospholipid polymer layer with well-ordered phosphorylcholine group could be outstanding functional membrane for biomedical diagnostic devices without non-specific binding and reduction of immunologic activity of immobilized antibody.     

Use of cellulose derivatives on gold surfaces for reduced nonspecific adsorption of immunoglobulin G

This study addresses the design of protein-repellent gold surfaces using hydroxyethyl- and ethyl(hydroxyethyl) cellulose (HEC and EHEC) and hydrophobically modified analogues of these polymers (HM-HEC and HM-EHEC). Adsorption behavior of the protein immunoglobulin G (IgG) onto pure gold and gold surfaces coated with cellulose polymers was investigated and described by quartz crystal microbalance with dissipation monitoring (QCM-D), atomic force microscopy (AFM) and contact angle measurements (CAM). Surfaces coated with the hydrophobically modified cellulose derivatives were found to significantly outperform a reference poly(ethylene glycol) (PEG) coating, which in turn prevented 90% of non-specific protein adsorption as compared to adsorption onto pure gold. HEC and EHEC prevented around 30% and 60% of the IgG adsorption observed on pure gold, while HM-HEC and HM-EHEC were both found to completely hinder biofouling when deposited on the gold substrates. Adsorption behavior of IgG has been discussed in terms of polymer surface coverage and roughness of the applied surfaces, together with hydrophobic interactions between protein and gold, and also polymer-protein interactions.     

纳米金-蛋白A介导抗体定向固定的压电传感及电化学特性研究

以纳米金为载体标记蛋白A(PA),用于介导抗体在压电石英晶体金电极表面的定向固定化.以补体C_1q抗体为模型,采用压电传感技术实时监察了此敏感界面的免疫反应过程,并考察了与补体C_1q免疫反应的压电响应性能.金标PA固定抗体的方法与传统的直接PA固定化方法相比较,具有传感界面无需活化,固定抗体的免疫活性高等优点,可对相应抗原进行高灵敏的压电免疫检测.分别利用循环伏安和电化学交流阻抗技术对金标PA固定抗体及其免疫反应的动力学过程进行了表征.     

Enzyme Electrodes Using Bioelectrocatalytic Reduction of Hydrogen Peroxide

Abstract

Amperometric electrodes have been constructed using the direct electron transfer between electrode and peroxidase for mediatorless hydrogen peroxide detection at a potential of ?0.010 V. For this purpose peroxidase was either adsorbed on pyrographite or immobilized in electrochemically synthesized polypyrrole layers on pyrographite or platinum electrodes.     

Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized on L-glutathione self-assembled monolayers

A novel hydrogen peroxide biosensor has been fabricated based on covalently linked horseradish peroxidase （HRP） onto L- glutathione self-assembled monolayers （SAMs）. The SAMs-based electrode was characterized by electrochemical methods, and direct electrochemistry of HRP can be achieved with formal potential of-0.242 V （vs. saturated Ag/AgCl） in pH 7 phosphate buffer solution （PBS）, the redox peak current is linear to scan rate and rate constant can be calculated to be 0.042 s^-1. The HRP-SAMs- based biosensors show its better electrocatalysis to hydrogen peroxide in the concentration range of 1 × 10^-6 mol/L to 1.2 × 10^-3 mol/L with a detection limit of 4 × 10^-7 mol/L. The apparent Michealis-Menten constant is 3.12 mmol/L. The biosensor can effectively eliminate the interferences of dopamine, ascorbic acid, uric acid, catechol and p-acetaminophen.     

Direct electrochemistry and electrocatalysis of hemoglobin on gold nanoparticle decorated carbon ionic liquid electrode

In this paper a carbon ionic liquid electrode (CILE) was fabricated by using ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate ([EMIM]EtOSO₃) as modifier and further gold nanoparticles were in situ electrodeposited on the surface of CILE. The fabricated Au/CILE was used as a new platform for the immobilization of hemoglobin (Hb) with the help of a Nafion film. Electrochemical experimental results indicated that direct electron transfer of Hb was realized on the surface of Au/CILE with a pair of well-defined quasi-reversible redox peaks appeared. The formal peak potential (E⁰′) was obtained as −0.210 V (vs. SCE) in pH 7.0 phosphate buffer solution (PBS), which was the characteristic of Hb heme Fe(III)/Fe(II) redox couple. The fabricated Nafion/Hb/Au/CILE showed excellent electrocatalytic activity to the reduction of trichloroacetic acid (TCA) and the reduction peak current was in proportional to TCA concentration in the range from 0.2 to 18.0 mmol/L with the detection limit as 0.16 mmol/L (S/N = 3). The proposed electrode showed good stability and reproducibility, and it had the potential application as a new third-generation electrochemical biosensor.     

Electrochemical quartz crystal microbalance study of copper ad-atoms on gold and platinum electrodes Part I. Adsorption of anions in sulfuric acid

The deposition and dissolution processes of copper ad-atoms on a gold or a platinum electrode in sulfuric acid electrolyte solution were investigated by using the electrochemical quartz crystal microbalance. It was found that the weight loss in the removal of the Cu-adlayer from the Au substrate was considerably larger than that expected from Faraday's law whereas the deviation for the Pt substrate was very small. The adsorption of bisulfate or sulfate anions both on Cu ad-atoms and on the electrode substrates was discussed quantitatively. It was demonstrated that higher coverage with Cu ad-atoms and lower adsorbability with bisulfate or sulfate anions were obtained on the Pt electrode than on the Au, and these effects could be ascribed to the difference in electronegativity between Pt and Au substrates.     

Electrodeposition of gold nanoparticles on indium/tin oxide electrode for fabrication of a disposable hydrogen peroxide biosensor

A novel disposable third-generation hydrogen peroxide (H₂O₂) biosensor based on horseradish peroxidase (HRP) immobilized on the gold nanoparticles (AuNPs) electrodeposited indium tin oxide (ITO) electrode is investigated. The AuNPs deposited on ITO electrode were characterized by UV-vis, SEM, and electrochemical methods. The AuNPs attached on the ITO electrode surface with quasi-spherical shape and the average size of diameters was about 25 nm with a quite symmetric distribution. The direct electron chemistry of HRP was realized, and the biosensor exhibited excellent performances for the reduction of H₂O₂. The amperometric response to H₂O₂ shows a linear relation in the range from 8.0 μmol L⁻¹ to 3.0 mmol L⁻¹ and a detection limit of 2 μmol L⁻¹ (S/N = 3). The value of HRP immobilized on the electrode surface was found to be 0.4 mmol L⁻¹. The biosensor indicates excellent reproducibility, high selectivity and long-term stability.     

Direct electrochemistry and superficial characterization of DNA-cytochrome c-MUA films on chemically modified gold surface

Cytochrome c (Cyt. c) was immobilized on the 11-mercaptohendecanoic acid (MUA)-modified gold electrode. The electrode was stable and sensitive to Cyt. c. Later, DNA was also immobilized on the two-layer modified electrode. Cyclic voltammetry studies show that Cyt. c can interact with dsDNA and ssDNA. The binding site sizes were determined to be 15 base pairs per Cyt. c molecule with dsDNA and 30 nucleotides binding 1 Cyt. c molecule with ssDNA. The modified electrodes were characterized by quartz crystal microbalance (QCM), impedance spectroscopy and atomic force microscope (AFM). The modified electrode can be used for determining DNA.     

Direct evidence of electron flow via the heme c group for the direct electron transfer reaction of fructose dehydrogenase using a silver nanoparticle-modified electrode

The direct electron transfer reaction of fructose dehydrogenase (FDH) from Gluconobacter sp. on alkanethiol-modified silver nanoparticles (AgNPs) was examined using cyclic voltammetry and surface-enhanced resonance Raman scattering (SERRS). Using cyclic voltammetry, catalytic oxidation currents (based on the direct electron transfer reaction of FDH) were observed from a potential of approximately −100 mV (vs. Ag/AgCl, 3 M NaCl) in the presence of d-fructose, without a mediator. A comparison of the SERRS spectra and the resonance Raman spectra of FDH in solution indicated that the heme c site retained its six-coordinated low-spin heme after immobilization. Moreover, SERRS also demonstrated that the heme c of the adsorbed FDH was the electron transfer site within the enzyme.     

Selective immobilization of double stranded DNA on a gold surface through threading intercalation of a naphthalene diimide having dithiolane moieties

Newly synthesized naphthalene diimide 1 having two dithiolane moieties at its substituted termini bound to double stranded DNA by threading intercalation and the resulting complex was immobilized on the gold surface through a dithiolane-gold linkage as revealed by quartz crystal microbalance (QCM) experiments. DNA with 20-meric double stranded and 24-meric single stranded regions was indirectly immobilized on the gold electrode using this characteristic of 1. Hybridization efficiency was 92%, a value higher than 50% for a thiolated oligonucleotide under identical conditions. When this electrode was subjected to hybridization with a 124-meric target DNA in the presence of ferrocenylnaphthalene diimide (FND) as an electrochemical hybridization indicator, a large current increase was observed deriving from FND bound in the double stranded region newly formed between the probe and target DNA.     

Electrochemical evaluation of lectin-sugar interaction on gold electrode modified with colloidal gold and polyvinyl butyral

In this work, ConA and CramoLL lectins were immobilized on gold nanoparticles (AuNp) with polyvinyl butyral (PVB), and adsorbed on the surface of gold (Au) electrodes. Electrochemical impedance spectroscopy (EIS), in the frequency range from 100mHz to 100KHz, and cyclic voltammetry (CV), from -0.2 to 0.7V, were performed on these electrodes, in phosphate buffer (PBS) solution containing 10mM K(3)[Fe(CN)(6)]/K(4)[Fe(CN)(6)] (1:1) mixture as a redox probe. EIS and CV measurements showed that redox probe reactions on the modified Au electrodes were partially blocked due to the adsorption of AuNp-ConA-PVB and AuNp-CramoLL-PVB. SEM images showed the presence of aggregates of AuNp-ConA on PVB spherules in a tridimensional structure on the surface of the Au electrode. Bovine serum albumin (BSA) was adsorbed on the AuNp-Lectin-PVB modified electrode in order to block the remaining free gold sites. Both EIS and CV techniques yielded results that confirm positive responses of the lectins to ovalbumin agglutination. These results indicate an improvement of the sensitivity for detection of sugars that can be applicable to construction of a biosensor sensitive to glycoproteins in solution.