Structural properties of thermoresponsive poly(N-isopropylacrylamide)-poly(ethyleneglycol) microgels

We present investigations of the structural properties of thermoresponsive poly(N-isopropylacrylamide) (PNiPAM) microgels dispersed in an aqueous solvent. In this particular work poly(ethyleneglycol) (PEG) units flanked with acrylate groups are employed as cross-linkers, providing an architecture designed to resist protein fouling. Dynamic light scattering (DLS), static light scattering (SLS), and small angle neutron scattering (SANS) are employed to study the microgels as a function of temperature over the range 10 °C ≤ T ≤ 40 °C. DLS and SLS measurements are simultaneously performed and, respectively, allow determination of the particle hydrodynamic radius, R(h), and radius of gyration, R(g), at each temperature. The thermal variation of these magnitudes reveals the microgel deswelling at the PNiPAM lower critical solution temperature (LCST). However, the hydrodynamic radius displays a second transition to larger radii at temperatures T ≤ 20 °C. This feature is atypical in standard PNiPAM microgels and suggests a structural reconfiguration within the polymer network at those temperatures. To better understand this behavior we perform neutron scattering measurements at different temperatures. In striking contrast to the scattering profile of soft sphere microgels, the SANS profiles for T ≤ LCST of our PNiPAM-PEG suspensions indicate that the particles exhibit structural properties characteristic of star polymer configurations. The star polymer radius of gyration and correlation length gradually decrease with increasing temperature despite maintenance of the star polymer configuration. At temperatures above the LCST, the scattered SANS intensity is typical of soft sphere systems.     

Controlling the gelation temperature of biomimetic polyisocyanides

The gelation temperature and mechanical properties of aqueous ethylene glycol-decorated polyisocyanide solutions strongly depends on the length of the glycol tail. Copolymerisation of monomers with different tail lengths allows for precise engineering of the gel properties.     

Novel lower critical solution temperature phase transition materials effectively control osmosis by mild temperature changes

Osmosis can be controlled reversibly and effectively by mild temperature changes based on novel thermosensitive solutes with LCST transition. The nBu-TAEA thermosensitive solution can draw fresh water from seawater at temperatures less than the phase separation temperature, and the osmotic flow was reversed at higher temperatures.     

Crystallization behavior of soft, attractive microgels

The equilibrium phase behavior and the dynamics of colloidal assemblies composed of soft, spherical, colloidal particles with attractive pair potentials have been studied by digital video microscopy. The particles were synthesized by precipitation copolymerization of N-isopropylacrylamide (NIPAm), acrylic acid (AAc), and N,N'-methylene bis(acrylamide) (BIS), yielding highly water swollen hydrogel microparticles (microgels) with temperature- and pH-tunable swelling properties. It is observed that in a pH = 3.0 buffer with an ionic strength of 10 mM, assemblies of pNIPAm-AAc microgels crystallize due to a delicate balance between weak attractive and soft repulsive forces. The attractive interactions are further confirmed by measurements of the crystal melting temperatures. As the temperature of colloidal crystals is increased, the crystalline phase does not melt until the temperature is far above the lower critical solution temperature (LCST) of the microgels, in stark contrast to what is typically observed for phases formed due to purely repulsive interactions. The unusual thermal stability of pNIPAm-AAc colloidal crystals demonstrates an enthalpic origin of crystallization for these microgels.     

Switchable photoluminescence of CdTe nanocrystals by temperature-responsive microgels

In the present study, we report a method for preparing a fluorescent thermosensitive hybrid material based on monodisperse, thermosensitive poly( N-isopropyl acrylamide) (PNIPAM) microgels covered with CdTe nanocrystals of 3.2 nm diameter. The CdTe nanocrystals were covalently immobilized on the surface of PNIPAM microgels. The chemical environment around the CdTe nanocrystals was modified by changing the temperature and inducing the microgel volume-phase transition. This change provoked a steep variation in the nanocrystal photoluminescence (PL) intensity in such a way that when the temperature was under the low critical solution temperature (LCST) of the polymer (36 degrees C) the PL of the nanocrystals was strongly quenched, whereas above the LCST the PL intensity was restored.     

Interfacial phase transition of an environmentally responsive elastin biopolymer adsorbed on functionalized gold nanoparticles studied by colloidal surface plasmon resonance

The change in optical properties of colloidal gold upon aggregation has been used to develop an experimentally convenient colorimetric method to study the interfacial phase transition of an elastin-like polypeptide (ELP), a thermally responsive biopolymer. Gold nanoparticles, functionalized with a self-assembled monolayer (SAM) of mercaptoundecanoic acid onto which an ELP was adsorbed, exhibit a characteristic red color due to the surface plasmon resonance (SPR) of individual colloids. Raising the solution temperature from 10 degrees C to 40 degrees C thermally triggered the hydrophilic-to-hydrophobic phase transition of the adsorbed ELP resulting in formation of large aggregates due to interparticle hydrophobic interaction. Formation of large aggregates caused a change in color of the colloidal suspension from red to violet due to coupling of surface plasmons in aggregated colloids. The surface phase transition of the ELP was reversible, as seen from the reversible change in color upon cooling the suspension to 10 degrees C. The formation of colloidal aggregates due to the interfacial phase transition of adsorbed ELP was independently verified by dynamic light scattering of ELP-modified gold colloids as a function of temperature. Colloidal SPR provides a simple and convenient colorimetric method to study the influence of the solution environment, interfacial properties, and grafting method on the transition properties of ELPs and other environmentally responsive polymers at the solid-water interface.     

Temperature-responsive ionic liquid/water interfaces: relation between hydrophilicity of ions and dynamic phase change

Phase separation between ionic liquids (ILs) and molecular liquids is of interest physico-chemically, and also has industrial relevance. IL/water mixtures are of great interest in many fields. Unlike static phase separation between IL and water, dynamic shifts of IL/water mixtures between a homogeneous mixture and separate phases have a wide variety of applications. The miscibility of ILs with water generally increases upon heating, and a few ILs undergo a lower critical solution temperature (LCST)-type phase transition with water in which the separated biphases become miscible upon cooling. As the phase transition is controlled by changing the temperature by a few degrees, the LCST-type phase response of IL/water mixtures makes it possible to use ILs as solvents in various energy-saving processes. Since many hydrophilic ILs do not undergo phase separation with water, we aim to determine the necessary conditions under which hydrophobic ILs undergo the phase transition. Based on physico-chemical analysis of many hydrophobic ILs that undergo a phase separation after mixing with water, we find there is a particular range of "hydrophilicity" of these hydrophobic ILs within which the LCST-type phase transition is possible. Accordingly, a hydrophilicity index (HI) of ILs is proposed, in terms of the number of water molecules in the separated IL phase. The HI value proves to be a good indicator of the phase behaviour of IL/water mixtures, as well as their phase transition temperature. Potential application of the LCST-type phase change to the selective extraction of water-soluble proteins is also summarised.     

Temperature-responsive phase transition of polymer vesicles: real-time morphology observation and molecular mechanism

Novel thermosensitive polymer vesicles with controlled temperature-responsive phase transition at the lower critical solution temperature (LCST) varying from 8 to 81 degrees C were prepared via self-assembly of amphiphilic hyperbranched star copolymers having a hydrophobic hyperbranched poly[3-ethyl-3-(hydroxymethyl)oxetane] (HBPO) core and many hydrophilic polyethylene oxide (PEO) arms. Real-time optical microscopic observation revealed that the polymer vesicles have undergone sequential morphology changes including enrichment, aggregation, fusion, and vesicle-to-membrane transformation near the LCST. Molecular-level investigation indicates that the LCST transition results from the decreasing water solubility of the polymer vesicles with increasing temperature based on the partial dehydration of the PEO vesicle corona. On the basis of these results, a LCST transition mechanism, in view of the molecular configuration, balance of hydrophilic and hydrophobic moieties, and the vesicle morphology transformations, was proposed. As far as we know, the work presented here is the first demonstration of thermosensitive vesicles based on PEO, and the finding may be useful to design the thermosensitive core-shell structures by introducing the PEO segments.     

Effect of thermosensitive matrix-phase transition on urease-catalyzed urea hydrolysis

Temperature dependencies of kinetic and equilibrium parameters of urea hydrolysis catalyzed by native urease and the urease immobilized in a thermosensitive poly-N-isopropylacrylamide gel have been studied. The swelling ratio of the collapsed urease-containing gel is shown to increase in the presence of urea. Below a lower critical solution temperature (LCST) of the polymer, the immobilized u reaseactually has thesame catalytic properties as the native enzyme. At temperatures above LCST, the observed catalytic activity of the immobilized enzyme depends chiefly not only on the thermoreversible matrix state, but also on gel water content.     

Thermoresponsive micelles from Jeffamine-b-poly(L-glutamic acid) double hydrophilic block copolymers

Double hydrophilic block copolymers (DHBC) consisting of a Jeffamine block, a statistical copolymer based on ethylene oxide and propylene oxide units possessing a lower critical solution temperature (LCST) of 30 degrees C in water, and poly(L-glutamic acid) as a pH-responsive block were synthesized by ring-opening polymerization of gamma-benzyl-L-glutamate N-carboxyanhydride using an amino-terminated Jeffamine macroinitiator, followed by hydrolysis. This DHBC proved thermoresponsive as evidenced by dynamic light scattering and small-angle neutron scattering experiments. Spherical micelles with a Jeffamine core and a poly(L-glutamic acid) corona were formed above the LCST of Jeffamine. The size of the core of such micelles decreased with increasing temperature, with complete core dehydration being achieved at 66 degrees C. Such behavior, commonly observed for thermosensitive homopolymers forming mesoglobules, is thus demonstrated here for a DHBC that self-assembles to generate thermoresponsive micelles of high colloidal stability.     

Atomistic insights on the LCST behavior of PMEO2MA in water by molecular dynamics simulations

Fully atomistic molecular dynamics simulations of poly(2‐[2‐methoxyethoxy]ethyl methacrylate) (PMEO₂MA) in water at temperatures below and above its lower critical solution temperature (LCST) were performed to improve the understanding of its LCST behavior. Atomic trajectories were used to calculate various structural and dynamic properties. Simulation results show that PMEO₂MA undergo a distinct coil‐to‐globule transition above LCST. Detailed analyses of the number of first hydration shell water molecules around various atomic regions are revealed that the water solubility of PMEO₂MA below LCST is mainly provided by the hydrophobic hydration around the side chain carbon atoms. This is achieved by the cage‐like water network formations which are disrupted when the temperature is increased above LCST, accompanied by significant amount of water molecule release and local water‐ordering reduction, which leads to the LCST phase transition. Furthermore, other analyses such as the number of hydrogen bonds and hydrogen bond lifetimes suggest that intermolecular hydrogen bondings between polymer and water molecules have little effect on the phase transition. Our results will contribute to a better understanding on the LCST phase transition of oligo(ethylene glycol) methyl ether methacrylate (OEGMA)‐based homopolymers at atomistic level that will be useful when designing homo‐ and co‐polymers of OEGMAs with desired properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 429–441     

Tunable Lower Critical Solution Temperature of Poly(butyl acrylate) in Ionic Liquid Blends

We describe the lower critical solution temperature(LCST)-type phase behavior of poly(butyl acrylate)(PBA) dissolved in hydrophobic 1-alkyl-3-methylimidazolium bis{(trifluoromethyl) sulfonyl}amide ionic liquids(ILs). The temperature-composition phase diagrams of these PBA/ILs systems are strongly asymmetric with the critical composition shifted to low concentrations of PBA. As the molecular weight increases from 5.0×10~3 to 2.0×10~4, the critical temperature decreases by about 67 °C, and the critical composition shifts to a lower concentration.Furthermore, the LCST of PBA/ILs system increases as increasing the alkyl side chain length in the imidazolium cation. Using IL blends as solvents,the LCST of PBA can be tuned almost linearly over a wide range by varying the mixing ratio of two ionic liquids without modifying the chemical structure of the polymers.     

UCST and LCST phase behavior of poly(trimethylene ether) glycol in water

We describe the initial studies of the complex aqueous phase behavior of poly(trimethylene ether) glycol (PO3G), a renewably sourced polyether glycol. Cloud point measurement revealed that a low molecular weight PO3G exhibits both lower critical solution temperature (LCST) and upper critical solution temperature (UCST) in water in the temperature range between 30°C and 80°C. At low concentrations of PO3G, the polymer solutions exhibit LCST‐type phase behavior. In the intermediate concentration ranges, PO3G and water are immiscible. However, at higher concentrations of PO3G, the solutions show UCST‐type phase behavior. In addition, both the LCSTs and UCSTs can be easily tuned over a wide range by varying the amount of alcohol co‐solvents. These findings have potential applications in the design of personal care applications and in the development of thermosensitive “smart” materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Versatile self-assembled hybrid systems with exotic structures and unique functions

In this review article, we describe recent progress about exotic self-assembled systems with various dimensions including biomolecules, supramolecules, unique hydrophobic amphiphiles, polymers, nano-clusters, and colloidal particles. Construction of robust biomolecular assemblies with exotic structures, such as ring and hollow capsule, is achieved by rational designs of symmetric biomolecular conjugates. In addition, we comprehensively summarized leading-edge topics on optical/topological properties of self-assembled hybrid systems, such as circularly polarized luminescence or structural color. The preparation of colloidal amorphous array with photonic band gap-induced angle-independent structural color is also achieved in consideration of the following situations: i) two-body sphere–sphere potential, ii) disorder packing using different sizes of colloidal particles, and iii) softness of colloidal particles. Lastly, we demonstrated useful utilizations of exotic self-assembled objects. Flakelike microparticles were transcribed into various nano-flake metals and applied as temperature indicator for the local heating of an addictive. All findings described here show meaningful hybrid strategies in self-assembly techniques and their functionalization as well as materialization.     

Lower critical solution temperature behavior of linear polymers in ionic liquids and the corresponding volume phase transition of polymer gels

Poly(benzyl methacrylate) (PBzMA) and its copolymers exhibit lower critical solution temperature (LCST)-type phase separation in common hydrophobic ionic liquids (ILs) such as 1-ethyl-3-methylimidazolium bis(trifluoromethane sulfone)imide ([C(2)mim][NTf2]). The turbidity measurements for PBzMA/IL mixed systems reveal that the LCST-type phase separation temperatures change significantly with the changes in the chemical structures of polymers and ILs. Moreover, cross-linked PBzMA gels show reversible and discontinuous volume phase transition in [C(2)mim][NTf2] with the changes in temperature.     

Synthesis and supramolecular self‐assembly of thermosensitive amphiphilic star copolymers based on a hyperbranched polyether core

A novel amphiphilic thermosensitive star copolymer with a hydrophobic hyperbranched poly (3‐ethyl‐3‐(hydroxymethyl)oxetane) (HBPO) core and many hydrophilic poly(2‐(dimethylamino) ethyl methacrylate) (PDMAEMA) arms was synthesized and used as the precursor for the aqueous solution self‐assembly. All the copolymers directly aggregated into core–shell unimolecular micelles (around 10 nm) and size‐controllable large multimolecular micelles (around 100 nm) in water at room temperature, according to pyrene probe fluorescence spectrometry and ¹H NMR, TEM, and DLS measurements. The star copolymers also underwent sharp, thermosensitive phase transitions at a lower critical solution temperature (LCST), which were proved to be originated from the secondary aggregation of the large micelles driven by increasing hydrophobic interaction due to the dehydration of PDMAEMA shells on heating. A quantitative variable temperature NMR analysis method was designed by using potassium hydrogen phthalate as an external standard and displayed great potential to evaluate the LCST transition at the molecular level. The drug loading and temperature‐dependent release properties of HBPO‐star‐PDMAEMA micelles were also investigated by using indomethacin as a model drug. The indomethacin‐loaded micelles displayed a rapid drug release at a temperature around LCST. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 668–681, 2008     

Study of the phase transition of poly(N,N‐diethylacrylamide) in water by rheology and dynamic light scattering

Poly(N,N‐diethylacrylamide) (PDEA) possesses a lower critical solution temperature (LCST) in aqueous media. The solution properties of PDEA at various temperatures have been characterized with techniques such as rheology and dynamic light scattering. There is a decrease in the coil size before the phase transition due to a coil‐to‐globule transition. At the LCST, rheological and dynamic light scattering studies have also confirmed an aggregation phenomenon. This aggregation modifies the rheological properties of the polymer solutions. High frequencies hinder the phase‐transition process and reduce the LCST of the polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1627–1637, 2003     

A simple FTIR spectroscopic method for the determination of the lower critical solution temperature of N‐isopropylacrylamide copolymers and related hydrogels

Linear and crosslinked polymers based on N‐isopropylacrylamide (NIPAAm) exhibit unusual thermal properties. Aqueous solutions of poly(N‐isopropylacrylamide) (PNIPAAm) phase‐separate upon heating above a lower critical solution temperature (LCST), whereas related hydrogels undergo a swelling–shrinking transition at an LCST. A linear copolymer made of NIPAAm/acryloxysuccinimide (98/2 mol/mol) and two hydrogels with different hydrophilicities were prepared. Fourier transform infrared (FTIR) spectroscopy was employed to determine the transition temperature and provide insights into the molecular details of the transition via probing of characteristic bands as a function of temperature. The FTIR spectroscopy method described here allowed the determination of the transition temperature for both the linear and crosslinked polymers. The transition temperatures for PNIPAAm and the gel resulting from the crosslinking with polylysine or N,N′‐methylenebisacrylamide (MBA) were in the same range, 30–35 °C. For the gels, the transition temperature increased with the hydrophilicity of the polymer matrix. The spectral changes observed at the LCST were similar for the free chains and the hydrogels, implying a similar molecular reorganization during the transition. The C H stretching region suggests that the N‐isopropyl groups and the backbone both underwent conformational changes and became more ordered upon heating above the LCST. An analysis of the amide I band suggests that the amide groups of the linear polymer were mainly involved in hydrogen bonding with water molecules below the LCST, the chain being flexible and disordered in a water solution. During the transition, around 20% of these intermolecular hydrogen bonds between the polymer and water were broken and replaced by intramolecular hydrogen bonds. Similar changes were also observed at the LCST of a gel crosslinked with MBA. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 907–915, 2000     

具有温度敏感和荧光特性的侧链查尔酮共聚物的研究

采用2,2′-偶氮二异丁腈作为引发剂,将N-异丙基丙烯酰胺和4-甲基丙烯酰氧基-4′-二甲氨基查尔酮单体,在四氢呋喃溶剂中通过自由基共聚制备了一系列具有溶剂和温度双重敏感荧光特性的侧链查尔酮共聚物,并通过红外光谱、核磁共振氢谱和紫外-可见光谱对其结构进行表征,通过吸光度法测定了共聚物中查尔酮单元的含量.研究了侧链查尔酮共聚物的温敏性以及溶剂极性和温度双重敏感的荧光特性.结果表明,侧链查尔酮共聚物是一类具有最低临界溶解温度(LCST)的温敏性聚合物,其LCST温度随着共聚物中查尔酮含量的增加而降低;随着溶剂极性的增加,侧链查尔酮共聚物的紫外-可见最大吸收波长红移,其荧光发光波长红移并且发光强度先增强后降低,具有溶剂极性敏感的荧光特性;同时对比侧链查尔酮共聚物水溶液低温和高温下的荧光,发现低温下几乎无荧光,高温下其荧光得到明显增强,其荧光具有可逆的温度"开/关"特性。     

Preparation of a thermosensitive cobalt phthalocyanine/N-isopropylacrylamide copolymer and its catalytic activity on thiol

A thermosensitive copolymer of cobalt tetra(N-acryliccarbonyl)aminophthalocyanine (Co-TACAPc) and N-isopropylacrylamide (NIPA) was prepared through redox polymerization in aqueous solution, and its catalytic activity for oxidation of 2-mercaptoethanol was investigated. The products of Co-TACAPc and its copolymer were characterized by elemental analysis, IR, UV/vis, and TGA. The copolymer can be dissolved into most solvents, particularly into water over a wide range of pH. The copolymer also revealed a lower critical solution temperature (LCST) phenomenon at 32.6 degrees C in water; i.e., it was soluble in cold water (below 32.6 degrees C) but insoluble in hot water (above 32.6 degrees C). As a result, in contrast to Co-TACAPc, the copolymer is able to serve as a homogeneous catalyst on oxidation of 2-mercaptoethanol below 31.0 degrees C and be recovered with increasing temperature due to its lower solubility above 31.0 degrees C.