Green Synthesis of Silver Nanoparticles Using <Emphasis Type="Italic">Commiphora caudata</Emphasis> Leaves Extract and the Study of Bactericidal Efficiency

The present study reports the synthesis of silver nanoparticles (Ag NPs) from silver nitrate solution using leaf extracts of Commiphora caudata. The formation of Ag NPs in the colloidal solution is confirmed by UV–Vis spectroscopy analysis. The identification of biomolecules is analyzed through fourier transform infrared spectroscopy. X-ray diffraction pattern shows that an average particle size of the synthesized nanoparticles are in the range of 40–24 nm. Field emission scanning electron microscopy and transmission electron microscopy confirm the formation Ag NPs in spherical shape. The photoluminescence study of the synthesized Ag NPs interprets the influence of C caudata leaf concentrations on emission behavior. Zeta potential measurement is carried out to determine the stability of synthesized Ag NPs. GC–MS analysis revealed that the C. caudata contained 11 compounds, such as Stigmasterol (24.14 %), Hexacosanoic acid, methyl ester (15.13 %) and 2-bromophenyl morpholine-4-carboxylate (11.71 %). The antibacterial activity of Ag NPs shows that these bio capped Ag NPs have higher inhibitory action for Escherichia coli, Klebsiella pheumoniea, Micrococcus flavus, Pseudomonas aeruginosa, Bacillus subtilis, Bacillus pumilus, Staphylococcus aureus.     

Study of Gaseous Sample Ionization by Excited Particles Formed in Glow Discharge Using High-Resolution Orthogonal Acceleration Time-of-Flight Mass Spectrometer

The experimental results of a mass spectral analysis of volatile organic compounds in a gaseous sample, obtained using an original design of an ion source based on the Penning ionization of a gas sample by excited metastable inert gas atoms, are presented. Using ANSYS software, a gas-dynamic simulation of reagent gas flow from discharge zone to ionization region was carried out to analyze the effect of gas flow profile on the transport of metastable atoms and ionization efficiency. The n-octane and toluene samples diluted with helium at 100 ppb mole concentrations were used for our experiments. The resulting mass spectra of n-octane and toluene samples containe far more intensive molecular ions in comparison to n-octane and toluene electron ionization mass spectra from the NIST database. The sensitivity of 5 ions per 1 pg and 130 ions per 1 pg was achieved for n-octane and toluene molecular ions using the developed ion source combined with our mass spectrometer. The corresponding detection limits are 2.3 pg s^–1 for n-octane molecular ions and 0.08 pg s^–1 for toluene molecular ions. The detection limit for the reported ion source was considered theoretically.     

Synthesis,structural, and electrochemical properties of NaCo(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> cathode for sodium-ion batteries

A new Co-base sodium metaphosphate compound, NaCo(PO₃)₃, has been synthesized here by solid-state method. The crystal structure is refined by the Rietveld method, and the results reveal that NaCo(PO₃)₃ has an orthorhombic structure with the space group of P2 ₁ 2 ₁ 2 ₁ and lattice parameters of a = 14.2453(2) Å, b = 14.2306(1) Å, and c = 14.2603(2) Å. Its typical morphology and chemical composition are confirmed by scanning electron microscopy (SEM) and energy-dispersive spectrometry (EDS). The valence states of all elements and the internal/external vibrational modes of NaCoP₃O₉ compound are measured by X-ray photoelectron and vibrational spectrum, where a typical feature of the (PO₃)^? polyanion group is observed. Meanwhile, the electrochemical properties of NaCo(PO₃)₃ cathode for sodium-ion batteries are also elevated and an initial discharge capacity of 33.8 mAh/g can be obtained at 0.05 C within 1.5–4.2 V. After 20 cycles, a discharge capacity of 26.7 mAh/g can be obtained and a well-kept oxidation–reduction plateau is still observed for NaCo(PO₃)₃ cathode, indicating the good reversibility of this metaphosphate electrode.     

Modeling of half-Heusler crystals with the chalcopyrite structure: Li<Subscript>2</Subscript>MgZn<Emphasis Type="Italic">X</Emphasis><Subscript>2</Subscript> (X = N,P, As,Sb)

A model of Li₂MgZnX ₂ half-Heusler compounds with the chalcopyrite structure is considered. The electronic structure is studied from first principles, showing that Li₂MgZnX ₂ are direct-gap crystals, except for pseudo-direct-gap Li₂MgZnP₂, with a band gap of 2.7 eV, 2.2 eV, 3.3 eV, and 2.5 eV for X = N, P, As, and Sb, respectively. The band structure and chemical bonding in the model crystals are found to be similar to those in LiMgX and LiZnX half-Heusler crystals. Total electron density and deformation electron density distributions are obtained. It is found that Mg–X and Zn–X ionic-covalent bonds are stronger than Li–X ionic bonds in Li₂MgZnX ₂ crystals, which allows Li atoms to move in the space between MgX ₄ and ZnX ₄ cation tetrahedra.     

Effect of the activation of a graphite-epoxy composite electrode and the buffer capacity of a solution on the reversibility of the hydroquinone electrode reaction

Peak potentials and the kinetics of hydroquinone oxidation at an electrode from a graphite-epoxy composite in activated and passivated states were studied in supporting electrolytes of different buffer capacities and pH varying from 0.1 to 8.8, using methods of direct-current and cyclic voltammetry. The electrode was activated before its polarization by mechanically cutting a 0.2–4-μm surface layer directly in a test solution. The electrode was passivated by storing in air for two or more days. The behavior of hydroquinone in its oxidation at the passivated and activated electrodes was compared using diagnostic criteria for the following functions: I _a?v ^1/2, logI _a?logv, I _a/v ^1/2?v ^1/2, and I _a/c, where v is the rate of the potential sweep and c is the volumetric concentration of hydroquinone. The potential difference of anodic and cathodic peaks in cyclic voltammograms indicated the reversibility of the electrode reaction in all supporting electrolytes.     

Preparation,characterization of new Co(II) and Cu(II) phthalocyanines and their catalytic performances in aerobic oxidation of substituted phenols

The host–guest inclusion complex of meta-cresol (m-cresol, liquid at room temperature, guest molecule) is synthesized with β-cyclodextrin (β-CD, host molecule). The inclusion complex is characterized by various techniques like nuclear magnetic resonance, powder X-ray diffraction, field emission scanning electron microscopy and spectroscopic (steady state as well as time-resolved) techniques. To the best of our knowledge, no literature data is available on the photophysical properties (especially fluorescence upon photoexcitation) of m-cresol in liquid media till date. Our spectroscopic studies exhibit some interesting photophysical properties of m-cresol and its inclusion complex with β-CD in different liquid media. The present work is important in view of the various potential applications of m-cresol in science, technology and medicine.     

One-step preparation of sulfonated carbon and subsequent preparation of hybrid material with polyaniline salt: a promising supercapacitor electrode material

The present trend to increase the energy density of electrochemical supercapacitor is to hybrid the electrochemical double layer capacitance electrode materials of carbon with loading or encapsulation of transition metal oxide or conductive polymeric pseudocapacitor materials as the binary or ternary hybrid electrochemical active materials. In this work, we selected polyaniline salt-sulfonated carbon hybrid (PANI-SA?C _SA ) as a cheaper electrode material for supercapacitor electrode. Sulfonated carbon (C _SA ) was prepared from hydrothermal carbonization of furaldehyde and p-toluenesulfonic acid. Polyaniline-sulfate salt containing sulfonated carbon was prepared by chemical oxidative polymerization of aniline using ammonium persulfate in presence of sulfuric acid and sulfonated carbon via aqueous, emulsion and interfacial polymerization pathways. Formation of hybrid material was confirmed from scanning electron microscopy. Among the hybrid prepared with three different polymerization pathways, hybrid prepared by aqueous polymerization pathway showed better electrochemical performance. The specific capacitance of the hybrid prepared via aqueous polymerization was 600 F g^?1, which is higher than that of the pristine PANI-SA (350 F g^?1) and C _SA (30 F g^?1). Hybrid material was subjected for 8000 charge-discharge cycles and at 8000 cycles; it showed 88% retention of its original specific capacitance value of 485 F g^?1 with coulombic efficiency (97–100%). These results showed that C _SA micro spheres prevent the degradation of PANI-SA chains during charge/discharge cycles. Specific capacitance, cycle life, low solution resistance, low charge transfer resistance and high phase angle value of PANI-SA?C _SA supercapacitor cell indicates a higher performance supercapacitor system.

Open image in new window

Graphical abstract Synthesis of hybrid of sulfonated carbon with polyaniline sulfate salt and its supercapacitor performance Ravi Bolagam, Palaniappan Srinivasan,^* Rajender Boddula

     

Calculating constants of the rates of the reactions of excitation,ionization, and atomic exchange: A model of a shock oscillator with a change of the Hamiltonian of the system

A new model for calculating the rates of reactions of excitation, ionization, and atomic exchange is proposed. Diatomic molecule AB is an unstructured particle M upon the exchange of elastic-vibrational (VT) energy, i.e., a model of a shock forceful oscillator with a change in Hamiltonian (SFOH). The SFOH model is based on the quantum theory of strong perturbations. The SFOH model allows generalization in simulating the rates of the reactions of excitation, ionization, and atomic exchange in the vibrational-vibrational (VV) energy exchange of diatomic molecules, and the exchange of VV- and VT-energy of polyatomic molecules. The rate constants of the excitation of metastables A ³Σ _u ⁺, B ³Π _g , W ³Δ _u , B′³Σ _u ^-, a′³Σ _u ^-, and the ionization of a nitrogen molecules from ground state X²Σ _g ⁺ upon a collision with a heavy structureless particle (a nitrogen molecule), are found as examples.     

Interaction of solid and polymeric lithium electrolytes with composites based on carbon fibers and silicon nanoclusters: Quantum-chemical modeling

In the framework of the search for promising electrodes and membranes for lithium-ion batteries, quantum-chemical modeling of the contact area of the solid (Li₁₀GeP₂S₁₂) and polymeric LiNafion · nDMSO-based electrolytes with an anode as carbon fibers coated with silicon nanoclusters (Si _n C _m ) has been performed by the density functional theory method with inclusion of gradient correction and periodic conditions (PBE/PAW). It has been found that the polymeric electrolytes form a better contact with the electrode surface than the solid electrolytes. The barriers to lithium transport in the polymeric LiNafion · nDMSO-based electrolyte have been estimated at 0.3 eV, and those to Li migration from the electrolyte into the electrode have been estimated at 0.4 eV.     

Chemical oscillation in electrochemical oxidation of methanol on Pt surface

Based on dual path reaction mechanism, a nonlinear dynamics model reflecting the potential oscilla- tion in electrooxidation of methanol on Pt surface was established. The model involves three variables, the electrode potential (e), the surface coverage of carbon monoxide (x), and adsorbed water (y). The chemical reactions and electrode potential were coupled together through the rate constant ki = exp(ai(e ? ei)). The analysis to the established model discloses the following: there are different kinetics be- haviors in different ranges of current densities. The chemical oscillation in methanol electrooxidation is assigned to two aspects, one from poison mediate CO of methanol electrooxidation, which is the in- duced factor of the chemical oscillation, and the other from the oxygen-containing species, such as H2Oa. The formation and disappearance of H2Oa deeply depend on the electrode potential, and directly cause the chemical oscillation. The established model makes clear that the potential oscillation in methanol electrooxidation is the result of the feedback of electrode potential e on the reactions in- volving poison mediates CO and oxygen-containing species H2Oa. The numerical analysis of the estab- lished model successfully explains why the potential oscillation in methanol galvanostatic oxidation on a Pt electrode only happens in a certain range of current densities but not at any current density.     

The response electron–electron repulsion energy and energy component analysis in CC/MBPT methods

Molecular properties are computed as responses to perturbations (energy derivatives) in coupled-cluster (CC)/many-body perturbation theory (MBPT) models. Here, the CC/MBPT energy derivative with respect to a general two-electron (2-e) perturbation is assembled from gradient theory for 2-e property evaluation, including the electron repulsion energy. The correlation energy (?E) is shown to be the sum of response kinetic (?T), electron–nuclear attraction (?V), and electron repulsion (?V _ee ) energies. Thus, evaluation of total V _ee for energy component analysis is simple: For total energy (E), total 1-e responses T and V, and nuclear–nuclear repulsion energy (V _NN ), V _ee  = E ? V _NN  ? T ? V is the true 2-e response value. Component energy analysis is illustrated in an assessment of steric repulsion in ethane’s rotational barrier. Earlier SCF-based results (Bader et al. in J Am Chem Soc 112:6530, 1990) are corroborated: The higher-energy eclipsed geometry is favored versus staggered in the two repulsion energies (V _NN and V _ee ), while decisively disfavored in electron–nuclear attraction energy (V). Our best quality calculations (CCSD/cc-pVQZ) attain practical Virial Theorem compliance (i.e., agreement among the kinetic energy, potential energy, and total energy representations) in assigning 2.70 ± 0.06 to the barrier height; ?195.80 kcal/mol is assigned to the drop in “steric” repulsion upon going to the eclipsed geometry. Steric repulsion is not responsible for any fraction of the ~3 kcal/mol barrier.     

Calibration curve equation in the local voltammetry of eutectic alloys with anomalous and divorced eutectics

An equation i = f(c) is proposed for a calibration curve under the conditions of local voltammetry based on the previous study of the anode dissolution of heterogeneous eutectic alloys with anomalous and divorced eutectics.     

Structural and electronic properties of heptachlor

In this work, the molecular geometry of heptachlor is investigated using ab initio HF, DFT, LDA, and GGA methods. The natural bond orbital (NBO) analysis is performed at the B3LYP/6-311++G(d,p) level of theory. The first order hyperpolarizability β_total, the mean polarizability Δα, the anisotropy of the polarizability Δα, and the dipole moment μ, are calculated by B3LYP/6-311++G(d,p) and HF/6- 311++G(d,p) methods. The first order hyperpolarizability (β_total) is calculated based on the finite field approach. UV spectral parameters along with HOMO, LUMO energies for heptachlor are determined in vacuum and the solvent phase using HF, DFT, and TD-DFT/B3LYP methods implemented with the 6-311++G(d,p) basis set. Atomic charges and electron density of heptachlor in vacuum and ethanol are calculated using DFT/B3LYP and TD-DFT/B3LYP methods and the 6-311++G(d,p) basis set. In addition, after the frontier molecular orbitals (FMOs), the molecular electrostatic potential (MEP), the electrostatic potential (ESP), the electron density (ED), and the solvent accessible surface of heptachlor are visualized as a results of the B3LYP/6-311++G(d,p) calculation. Densities of states (DOS), the external electric field (EF) effect on the HOMO-LUMO gap, and the dipole moment are investigated by LDA and GGA methods.     

Inclusion of the concentration dependence of the diffusion coefficient in the sand equation

The applications of the Sand equation in potentiometry of electrode and membrane systems for precise measurements of the transition time (τ) have been determined. An approach was suggested for choosing the diffusion coefficient of electrolyte (D) in the case when the concentration changes from its value in the agitated solution (where D = D_b) to the nearly zero value at the surface (D = D₀ corresponds to an infinitely dilute solution), D_b and D₀ being substantially different. The Nernst–Planck–Poisson nonstationary equations were numerically solved in a one-dimensional system including an ion-exchange membrane and two adjacent diffusion layers (for the electrode–solution system, the result is a particular case). An effective value D_ef was found, whose substitution in the Sand equation gave τ identical to that obtained by numerical solution. The neglect of the concentration dependence D(с) can lead to a nonadequate determination of the ion transport numbers in the membrane.     

Electron structure and spectroscopic properties of yttrium compounds with cinnamic and quinaldic acids

The analysis of electron structure of yttrium(III) complexes with cinnamic and quinaldic acids was carried out. Electron transitions were assigned, and influence of the nature of frontier orbitals on the position of absorption bands in the electron spectra was revealed. The TD-DFT calculation has shown that different ratios of intensities of π–π* and n–π* bands in the electron absorption spectra of the compounds are caused by different natures of frontier orbitals of the complexes. It was found that dipole moments of both complexes increase upon photoexcitation, greater changes being observed in Y(III) quinaldate. The reason of the greater Stokes shift of Y(III) quinaldate was established.     

Electrochemical Characteristics of Poly(<Emphasis Type="Italic">o</Emphasis>-Aminobenzoic Acid) Modified Glassy-Carbon Electrode and Its Electrocatalytic Activity towards Oxidation of Epinephrine

Poly(o-aminobenzoic acid) (o-ABA) film is deposited on glassy-carbon electrode (GCE) by electropolymerization in pH 7.0 phosphate buffer solution (PBS). Electrochemical behavior of modified electrode is investigated by electrochemical impedance spectroscopy (EIS), different pulse voltammetry (DPV), and cyclic voltammetry (CV). The results indicate that there is a greater resistance during the electron transfer process in poly(o-ABA) film than in bare GCE for the redox of [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻. Further research indicates that epinephrine (EP) can be strongly absorbed on the surface of the poly(o-ABA) film-modified electrode. The modified electrode shows an excellent electrocatalytical activity on EP oxidation. The EP cathodic peak potential shifts negatively with a slope of −53.5 mV/pH, indicating that equal amounts of proton and electron are involved in the electrode reaction process. In pH 7.0 PBS, the peak current of EP and the concentration has a linear relationship from 0 to 65 μM by amperometric current-time curve. __________ From Elektrokhimiya, Vol. 41, No. 9, 2005, pp. 1059–1065. Original English Text Copyright ? 2005 by Cheng, Jin, Zhang. The text was submitted by the authors in English.     

Determination of tyrosine using <Emphasis Type="Italic">p</Emphasis>-sulfonated calix[<Emphasis Type="Italic">n</Emphasis>]arene modified electrode

Cyclic voltammetry was used to detect p-sulfonated calix[n]arenas (SCnA) how to immobilize on gold surface. P-sulfonated calix[n]arenes not only increased the specific surface area of the modified electrode, but also improved the enrichment ability of tyrosine. This led to a significant increase in peak current, and improved the sensitivity of tyrosine determination on the p-sulfonated calix[n]arenes-modified electrode. The modified electrode showed good catalytic ability of l-tyrosine oxidation reaction. The peak current of l-tyrosine increased and the oxidation peak potential shifted negatively with cavity size of the SCnA-modified electrode, which indicated that the catalytic ability of the modified electrode to l-tyrosine oxidation reaction was also enhanced. For the tyrosine guest molecule, the order of electrochemical activity and magnitude of catalytic ability of the oxidation reaction of the three modified gold electrodes was as follows: SC4A?>?SC6A?>?SC8A. The electrode had high selectivity and stability for the determination of tyrosine, with a wide linear range, low detection limit and high sensitivity at different concentrations under different pH values. This resulted in an accurate, fast, sensitive electrochemical method for the determination of tyrosine. The sensor was used for the determination of tyrosine in human urine with satisfactory results.     

Simulation of Unidirectional Ion Ejection in an Asymmetric Half-Round Rod Electrode Linear Ion Trap Mass Analyzer

An asymmetric trapping field was generated from an asymmetric half-round rod electrode linear ion trap (A-HreLIT), and its performance of unidirectional ion ejection was studied. Two different asymmetric structures of A-HreLITs were constructed, one rotating y electrode pairs toward an x electrode with an angle θ, and the other stretching one x electrode with a distance α. The center of trapping field was displaced away from the geometrical center of the ion trap, defined to be the midpoint along the axis of y between x electrodes, which leads to unidirectional ion ejection through one x electrode. Computer simulations were used to investigate the relationship between asymmetric geometric parameter of θ (or α) and analytical performance. Both structures could result in similar asymmetric trapping fields, which mainly composed of dipole, quadrupole, and hexapole fields. The dipole and hexapole fields were approximately proportional to the asymmetric geometric parameter of rotation angle θ (or stretch distance α). In simulation, ion trajectories and ion kinetic energy were calculated. For ions with m/z 609 Th, the simulation results showed that mass resolution of over 2400 (FWHM) and ion unidirectional ejection efficiency of nearly 90% were achieved in an optimized A-HreLIT. Ion detection efficiency of A-HreLIT could be improved significantly with only one ion detector, while maintaining a considerable mass resolution. Furthermore, the A-HreLIT could be driven by a traditional balanced RF power supply. These advantages make A-HreLIT suitable for developing miniaturized mass spectrometer with high performance.

Open image in new window

Graphical Abstract ?

     

Physico-Chemical Processes Induced by Electrical Breakdown and Discharge Responsible for Memory Effect in Krypton with &lt; 10 ppm Nitrogen

In order to analyze the processes induced by electrical breakdown and discharge responsible for memory effect in krypton-filled tube at low pressure, experimental data mean value of electrical breakdown time delay \(\bar{t}_{d}\) as a function of afterglow period τ (memory curve) was used. Analysis showed that in the 1 μs < τ < 7 ms interval positive ions formed in the previous discharge and in afterglow have a dominant role in secondary emission of electrons from the cathode which lead to initiation of breakdown. In the 7 ms < τ < 30 s interval N(⁴S) atoms have a dominant role in secondary electron emission. These atoms are formed during breakdown and discharge by dissociation of nitrogen molecules that are presented as impurities in krypton. For τ > 30 s the concentration of N(⁴S) atoms decreases significantly so that the dominant role in initiation of breakdown is taken over by cosmic rays and natural radioactivity. The increase in discharge current leads to the decrease in \(\bar{t}_{d}\) in the 1 μs < τ < 7 ms interval due to the increase in positive ion concentration. The increase in applied voltage decreases the values of \(\bar{t}_{d}\) for τ > 7 ms due to the increase in probability for breakdown. It has also been show that exposure of krypton-filled tube to low dose of gamma ray irradiation as well as UV irradiation with wavelength higher than 300 nm leads to the decrease in \(\bar{t}_{d}\). This decrease occurs for τ > 7 ms, when N(⁴S) atoms play a dominant role in breakdown initiation.