Synthesis of patterned polymer brushes from flexible polymeric films

Surface-initiated polymerizations were carried out from polymeric surfaces of commercially important polyester films, poly(ethylene terephthalate) (PET) and poly(ethylene naphthalate) (PEN). These plastic films were modified prior to polymerization by plasma oxidation, exposing surface hydroxyl groups, in order to immobilise patterned self assembled monolayers (SAMs) of trichlorosilane initiator, through the soft lithographic method of microcontact printing (μCP). Subsequently, polymerizations were initiated from the surface via controlled atom transfer radical polymerization (ATRP), under aqueous conditions, to create patterned brushes of the thermo-responsive polymer poly(N-isopropyl acrylamide) (PNIPAM). By creating patterned, rather than homogeneous brushes characterization was made possible by atomic force microscopy (AFM).     

Patterned nitroxide polymer brushes for thin-film cathodes in organic radical batteries

Nitroxide polymer brushes were covalently patterned on flexible conducting substrates via surface-initiated atom transfer radical polymerization and microcontact printing. As a cathode of organic radical batteries, the nitroxide polymer brushes prevent the nitroxide polymer from dissolving into electrolyte solvents, which improves the cycle-life performance of batteries.     

Contact printing a biomimetic catecholic monolayer on a variety of surfaces and derivation reaction

Biomimic catecholic "ink" is employed in surface patterning by using microcontact printing (μCP) on a variety of surfaces. The surface chemical patterning can be proofed by implementing a derivation reaction, such as specific biological recognition and surface-initiated polymerization for growth of polymer brushes.     

Carbohydrate‐Responsive Surface Adhesion Based on the Dynamic Covalent Chemistry of Phenylboronic Acid‐ and Catechol‐Containing Polymer Brushes

A glue, based on dynamic covalent chemistry, with a strong adhesion (2.38 kg cm^?2), water resistance and carbohydrate responsive reversibility is presented. Using surface initiated atom transfer radical polymerization (SI‐ATRP), glass and silicon surfaces were coated with copolymers functionalized with phenylboronic acids and catechols. In combination with microcontact printing (μCP) these polymer brushes give access to a carbohydrate responsive “supramolecular Velcro”.     

Synthesis of dense poly(acrylic acid) brushes and their interaction with amine-functional silsesquioxane nanoparticles

Poly(acrylic acid) polyelectrolyte brushes were synthesized by surface-initiated atom transfer radical polymerization (SI-ATRP) of tert-butyl acrylate on planar gold surfaces and subsequent hydrolysis. Three types of monolayers with different numbers of thiol binding sites per initiating unit were used. The binding strength to the gold surface turned out to be of crucial importance for the formation of uniform brush layers after acidic hydrolysis. The monolayers and polymer brushes were characterized by ellipsometry, infrared spectroscopy, water contact angle measurements, atomic force microscopy, and X-ray photoelectron spectroscopy. Their interaction with [(diglycidylamino)propyl]silsesquioxane nanoparticles at various pH values was studied by surface plasmon resonance.     

Stimuli-responsive binary mixed polymer brushes and free-standing films by LbL-SIP

We report a facile approach to preparing binary mixed polymer brushes and free-standing films by combining the layer-by-layer and surface-initiated polymerization (LbL-SIP) techniques. Specifically, the grafting of mixed polymer brushes of poly(n-isopropylacrylamide) and polystyrene (pNIPAM-pSt) onto LbL-macroinitiator-modified planar substrates is described. Atom transfer radical polymerization (ATRP) and free radical polymerization (FRP) techniques were employed for the syntheses of pNIPAM and pSt, respectively, yielding pNIPAM-pSt mixed polymer brushes. The composition of the two polymers was controlled by varying the number of macroinitiator layers deposited on the substrate (i.e., LbL layers = 4, 8, 12, 16, and 20); consequently, mixed brushes of different thicknesses and composition ratios were obtained. Moreover, the switching behavior of the LbL-mixed brush films as a function of solvent and temperature was demonstrated and evaluated by water contact angle and atomic force microscopy (AFM) experiments. It was found that both the solvent and temperature stimuli responses were a function of the mixed brush composition and thickness ratio where the dominant component played a larger role in the response behavior. Furthermore, the ability to obtain free-standing films was exploited. The LbL technique provided the macroinitiator density variation necessary for the preparation of stable free-standing mixed brush films. Specifically, the free-standing films exhibited the rigidity to withstand changes in the solvent and temperature environment and at the same time were flexible enough to respond accordingly to external stimuli.     

Completely aqueous procedure for the growth of polymer brushes on polymeric substrates

The growth of polymer brushes on polymer substrates is often challenging because of substrate incompatibility with the organic solvents used for initiator attachment. This letter reports the use of layer-by-layer adsorption of macroinitiators and subsequent aqueous ATRP from these immobilized initiators to prepare polymer brushes on polymeric substrates. Polyethersulfone (PES) films and porous membranes were modified with polyelectrolyte multilayer films, and a previously developed polycationic initiator, poly(2-(trimethylammonium iodide)ethyl methacrylate-co-2-(2-bromoisobutyryloxy)ethyl acrylate), was then electrostatically adsorbed onto these polyelectrolyte films. The immobilized macroinitiator is very efficient in initiating the growth of polymer brushes on PES, as demonstrated by aqueous syntheses of poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) films. PHEMA (250 nm thick) and PDMAEMA (40 nm thick) brushes were grown in 2 h from surfaces modified with polycationic initiators. Moreover, this procedure is effective for growing brushes in the pores of PES membranes.     

一种交联聚合物薄膜的表面引发聚合制备及其摩擦磨损性能

采用活性可控的表面引发原子转移自由基聚合方法,在硅片表面制备了聚3-(三甲氧基硅)丙基甲基丙烯酸酯聚合物刷,其中产物侧链的三甲氧基硅基团提供相邻分子间相互交联的位点而形成聚合物薄膜;采用衰减全反射红外光谱仪和原子力显微镜分析了薄膜的化学结构和微观形貌,利用椭圆偏光测厚仪和接触角测量仪测定了其厚度和水接触角,并利用微观和宏观摩擦磨损测试装置评价了薄膜的摩擦磨损性能.结果表明,所制备的薄膜具有聚合物的结构特征以及良好的减摩抗磨特性,且其抗磨能力随着厚度增加而增强.     

Reversible pH-controlled switching of poly(methacrylic acid) grafts for functional biointerfaces

Responsive polymeric brushes of poly(methacrylic acid) (PMAA) were grafted from silicon surfaces using controlled surface-initiated atom-transfer radical polymerization (SI-ATRP). The growth kinetics of PMAA was investigated with respect to the composition of the ATRP medium by grafting the polymer in mixtures of water and methanol with different ratios. The dissociation behavior of the polymer layers was characterized by FTIR titration after incubating the polymer-grafted substrates in PBS buffer solutions with different pH values. PMAA layers show a strong pH-dependent behavior with an effective pK(a) of the bulk polymer brush of 6.5 ± 0.2, which is independent of the polymer brush thickness and methanol content of the ATRP grafting medium. The pH-induced swelling and collapse of the grafted polymer layers were quantified in real time by in situ ellipsometry in liquid environment. Switching between polymer conformations at pH values of 4 and 8 is rapid and reversible, and it is characterized by swelling factors (maximum thickness/minimum thickness) that increase with decreasing the methanol content of the SI-ATRP medium.     

Rewritable Polymer Brush Micropatterns Grafted by Triazolinedione Click Chemistry

Triazolinedione (TAD) click reactions were combined with microcontact chemistry to print, erase, and reprint polymer brushes on surfaces. By patterning substrates with a TAD‐tagged atom‐transfer radical polymerization initiator (ATRP‐TAD) and subsequent surface initiated ATRP, it was possible to graft micropatterned polymer brushes from both alkene‐ and indole‐functionalized substrates. As a result of the dynamic nature of the Alder–ene adduct of TAD and indole at elevated temperatures, the polymer pattern could be erased while the regenerated indole substrate could be reused to print new patterns. To demonstrate the robustness of the methodology, the write–erase cycle was repeated four times.     

Multicomponent polymer brushes

This article describes a general synthetic route to laterally distinctive multicomponent polymer brushes on gold. The procedure involves repeated surface patterning using microcontact printing (muCP) of initiator-terminated thiols without backfilling with inert thiols and surface-initiated atomic transfer radical polymerization steps. In between brush growth, the remaining initiator moieties are deactivated to avoid reinitiation on existing brushes. Optical and fluorescence microscopy, atomic force microscopy, attenuated total reflectance Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy have been used to characterize every step of this procedure. We found that brushes can be grown from initiator-modified surfaces that contain bare gold areas and that these areas remain available for further patterning using muCP. To demonstrate the flexibility of this approach, surfaces containing four different polymer brushes in patterns ranging from 2 x 4 microm lines to 20 x 20 microm squares were fabricated. The range of chemical functionalities incorporated includes cationic and anionic polyelectrolytes, as well as thermally responsive polymers.     

Surface‐Initiated Polymerization for Amplification of Self‐Assembled Monolayers Patterned by Microcontact Printing

Patterned polymer brushes can be prepared by a novel strategy that combines surface‐initiated polymerization and microcontact printing (see picture; μCP SAM indicates the self‐assembled monolayer formed by microcontact printing). The living nature of the polymerization process permits the thickness of the polymer brush and its physical properties to be accurately controlled.     

Thermally-responsive surfaces comprising grafted poly(N-isopropylacrylamide) chains: Surface characterisation and reversible capture of dispersed polymer particles

In this study we investigate thermally-responsive surfaces prepared by grafting PNIPAm from a cationic macroinitiator (MI) that was adsorbed onto a range of anionic substrates. The substrates used were mica, glass, quartz and high surface area carbon foam. The carbon foam was rendered thermally responsive by first coating it with a layer of calcined laponite particles. PNIPAm brushes were grown from the substrates using surface-initiated atom transfer radical polymerisation. The thermally-responsive PNIPAm layers were characterised in detail at room temperature and 50 °C using atomic force microscopy (AFM) and contact angle measurements. The surfaces changed from being non-adhesive to adhesive when the temperature was increased to 50 °C. Young’s modulus values and adhesive force values are reported. Particle capture experiments involving dispersed polystyrene or poly(BD/MAA) (butadiene and methacrylic acid) particles were conducted. High extents of particle capture were observed. It was shown that the highest extents of thermally-triggered particle capture at 50 °C occurred for surfaces that exhibited the largest increases in contact angle upon increasing the temperature. Importantly, thermally-triggered capture for both anionic polystyrene and poly(BD/MAA) particles was shown to be partially reversible with up to 30% of the captured particles released during cooling. This is the first time that significant reversibility of thermally-triggered capture of polymer particles has been reported.     

Synthesis and morphological study of thick benzyl methacrylate-styrene diblock copolymer brushes

We demonstrate, for the first time, the synthesis of model poly(benzyl methacrylate) [P(BnMA)] brushes of very high thickness (>300 nm) on silicon wafer. P(BnMA) brush is also synthesized from the surface of silica nanoparticles, from a covalently anchored initiator monolayer, using ambient temperature ATRP. The kinetic studies and block copolymerization from the surface anchored P(BnMA)-Br macroinitiator showed that the polymerization was controlled in nature. AFM, ellipsometry, and water contact angle were used for the characterization of the polymer brush. The grafting density of the P(BnMA) brush, formed by immersion in a dilute monomer solution, was relatively less (～11% less) in comparison to that obtained by immersion in neat monomer under similar conditions. The P(BnMA)-Br macroinitiator brushes were used to synthesize P(BnMA-b-S) diblock copolymer brushes by the ATRP of styrene at 95 °C. The P(BnMA-b-S) brushes showed stimulus response to a selective solvent and various nanopatterns were observed according to the composition of the block copolymer.     

Water Content of Hydrated Polymer Brushes Measured by an In Situ Combination of a Quartz Crystal Microbalance with Dissipation Monitoring and Spectroscopic Ellipsometry

Poly(methacryloyloxy ethyltrimethylammonium chloride) (PMETAC), poly(sulfopropylmethacrylate potassium salt), or poly(N‐isopropyl acrylamide) (PNIPAM) brushes are synthesized by means of the atom transfer radical polymerization technique from gold surfaces coated with a monolayer of the initiator ω‐mercaptoundecyl bromo isobutyrate. The brush growth is followed in situ and in real time by the combination of quartz crystal microbalance with dissipation technique (QCM‐D) and spectroscopic ellipsometry in a single device. The combination of QCM‐D and ellipsometry allows for the simultaneous determination of both the acoustic mass, m_acous, comprising the mass of the polymer and the solvent, and the optical mass, m_opt, which corresponds to the polymer mass alone. Brush hydration is calculated from the difference between the values obtained for m_acous and m_opt for each polymer synthesized. Brush hydration is then used to quantify the percentage of water released in the brush during collapse; a 30–40% release of water for PMETAC and PSPM brushes in 1 M NaCl and 80% for PNIPAM brushes when the temperature is increased to values above the lower critical solution temperature is observed.     

Facile synthesis of thermally stable poly(N-vinylpyrrolidone)-modified gold surfaces by surface-initiated atom transfer radical polymerization

Well-controlled polymerization of N-vinylpyrrolidone (NVP) on Au surfaces by surface-initiated atom transfer radical polymerization (SI-ATRP) was carried out at room temperature by a silanization method. Initial attempts to graft poly(N-vinylpyrrolidone) (PVP) layers from initiators attached to alkanethiol monolayers yielded PVP films with thicknesses less than 5 nm. The combined factors of the difficulty in the controllable polymerization of NVP and the instability of alkanethiol monolayers led to the difficulty in the controlled polymerization of NVP on Au surfaces. Therefore, the silanization method was employed to form an adhesion layer for initiator attachment. This method allowed well-defined ATRP polymerization to occur on Au surfaces. Water contact angle, X-ray photoelectron spectroscopy (XPS), and reflectance Fourier transform infrared (reflectance FTIR) spectroscopy were used to characterize the modified surfaces. The PVP-modified gold surface remained stable at 130 °C for 3 h, showing excellent thermal stability. Thus, postfunctionalization of polymer brushes at elevated temperatures is made possible. The silanization method was also applied to modify SPR chips and showed potential applications in biosensors and biochips.     

Polymer brushes grafted to "passivated" silicon substrates using click chemistry

We present herein a versatile method for grafting polymer brushes to passivated silicon surfaces based on the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition (click chemistry) of omega-azido polymers and alkynyl-functionalized silicon substrates. First, the "passivation" of the silicon substrates toward polymer adsorption was performed by the deposition of an alkyne functionalized self-assembled monolayer (SAM). Then, three tailor-made omega-azido linear brush precursors, i.e., PEG-N3, PMMA-N3, and PS-N3 (Mn approximately 20,000 g/mol), were grafted to alkyne-functionalized SAMs via click chemistry in tetrahydrofuran. The SAM, PEG, PMMA, and PS layers were characterized by ellipsometry, scanning probe microscopy, and water contact angle measurements. Results have shown that the grafting process follows the scaling laws developed for polymer brushes, with a significant dependence over the weight fraction of polymer in the grafting solution and the grafting time. The chemical nature of the brushes has only a weak influence on the click chemistry grafting reaction and morphologies observed, yielding polymer brushes with thickness of ca. 6 nm and grafting densities of ca. 0.2 chains/nm2. The examples developed herein have shown that this highly versatile and tunable approach can be extended to the grafting of a wide range of polymer (pseudo-) brushes to silicon substrates without changing the tethering strategy.     

Salt‐Induced Depression of Lower Critical Solution Temperature in a Surface‐Grafted Neutral Thermoresponsive Polymer

Summary: Quartz crystal microbalance with dissipation monitoring (QCM‐D) is employed to determine the effect of salt on the volume phase transition of thermoresponsive polymer brushes. Changes in mass and viscoelasticity of poly(N‐isopropylacrylamide) (PNIPAM) layers grafted from a QCM‐D crystal are measured as a function of temperature, upon contact with aqueous solutions of varying salt concentrations. The phase‐transition temperature of PNIPAM brushes, T_C,graft, quantified from the QCM‐D measurements is found to decrease as the concentration of salt is increased. This phenomenon is explained by the tendency of salt ions to affect the structure of water molecules (Hofmeister effect). However, in contrast to the linear decrease in phase‐transition temperature upon increasing salt concentration observed for free PNIPAM, the trend in T_C,graft for PNIPAM brushes is distinctively non‐linear.

Schematic representation of the effect of salt concentration on the phase transition behavior of thermoresponsive polymer brushes.     

Qualitative degradation of the pesticide coumaphos in solution,controlled aerosol,and solid phases on quaternary ammonium fluoride polymer brushes

With the growing demand for measurements of organophosphate (OP) pesticide use in agriculture along with the potential threat of OP‐based chemical warfare agents, there is a need for new devices or surfaces that can quickly degrade OPs into less toxic substances in a variety of environments. Using surface‐initiated atom transfer radical polymerization and post‐polymerization synthesis, we prepared a series of quaternary ammonium fluoride‐based polymer brushes designed to absorb and degrade OPs. Specifically, a polymer brush was formed using 2‐dimethylamino‐ethyl methacrylate (DMAEMA) as monomer, which, following post‐polymerization quaternization of the tertiary amine with alkylating agents and fluoride ion exchange, afforded the OP‐reactive polymer surfaces. Poly(DMAEMA) brushes were grown to thicknesses of ~100 nm on silicon wafers and glass slides and characterized by ellipsometry, atomic force microscopy, and Raman spectroscopy. Quaternization and subsequent ion exchange of the brushes were characterized by Raman spectroscopy and X‐ray photoelectron spectroscopy, respectively. The interaction of the brushes with OPs was evaluated using the OP‐based pesticide coumaphos, through the presence of the highly fluorescent degradation product chlorferon; analyzed qualitatively via fluorescence microscopy; and confirmed via nuclear magnetic resonance and mass spectrometry. We found that the fluoride form of the brush reliably degraded coumaphos deposited via controlled solution‐based applications and aerosol applications (electrohydrodynamic jetting) and from microcontact printing of the dried solid directly onto the brush. No degradation was seen for coumaphos deposited on poly(DMAEMA) or the iodide form of the quaternized brush. Copyright © 2016 John Wiley & Sons, Ltd.