Electrosynthesis of 4-bromosubstituted pyrazole and its derivatives

Electrosynthesis of 4-bromosubstituted pyrazole and its derivatives was carried out by bromination of initial pyrazoles on Pt anode in NaBr aqueous solutions under the conditions of diaphragm galvanostatic electrolysis. A donor substituent (Me or Et) in pyrazole ring was shown to promote to the bromination process, while an acceptor substituent (NO₂ or COOH) does not produce a significant effect to this process. Thus, the yield of 4-bromosubstituted derivatives from bromination of 3,5-dimethylpyrazole, 1,5-dimethylpyrazole, 3-nitropyrazole, pyrazole-3(5)-carboxylic acid, 1-methylpyrazole-3-carboxylic acid, 1-methylpyrazole-5-carboxylic acid, 1-ethylpyrazole-5-carboxylic acid, and 1-methylpyrazole-3,5-dicarboxylic acid amounted 70, 94, 88, 89, 84, 78, 89, and 84%, respectively.     

Electrosynthesis of 4-iodopyrazole and its derivatives

Electrosynthesis of 4-iodo-substituted pyrazoles has been accomplished by iodination of the corresponding precursors on a Pt-anode in aqueous solutions of KI under conditions of the diaphragm galvanostatic electrolysis. Efficiency of the process depends on the donor-acceptor properties of substituents and their positions in the pyrazole ring. Thus, iodination of pyrazole, 3,5-dimethylpyrazole, 3-nitropyrazole, 1-methylpyrazole, 1,3-dimethylpyrazole, pyrazole-3(5)-carboxylic acid or methyl esters furnished 4-iodo derivatives in 57, 86, 2, 5, 35, 30, and 40% yields, respectively.     

Synthesis of 3-amino-4-nitropyrazoles

3-Bromo-1,5-dimethyl-4-nitropyrazole does not react upon heating with aqueous ammonia, while 1,5-dimethyl-3,4-dinitropyrazole under the same conditions yields 3-amino-1,5-dimethyl-4-nitropyrazole, which is formed from 3-bromo-1,5-dimethyl-4-nitropyrazole in the presence of a copper catalyst. The amination of 1-methyl-3,4-dinitropyrazole-5-carboxylic acid is accompanied by decarboxylation, which is characteristic for 4-substituted 1-methylpyrazole-5-carboxylic acids upon heating in aqueous ammonia or water.     

Electrosynthesis of 4-chloropyrazolecarboxylic acids

4-Chlorosubstituted pyrazolecarboxylic acids were synthesized via chlorination of the corresponding acids at the Pt anode in NaCl aqueous solutions under conditions of divided galvanostatic electrolysis. The efficiency of the process depends on the structures of the initial pyrazolecarboxylic acids, particularly, on the donor-acceptor properties of the substituents and on their position in the pyrazole ring. The yields of the 4-chlorosubstituted products of chlorination of pyrazole-3(5)-carboxylic acid, 1-methylpyrazole-5-carboxylic acid, 1-methyl-pyrazole-3-carboxylic acid, 1-ethylpyrazole-3-carboxylic acid, and 1-methyl-3-nitropyrazole- 5-carboxylic acid are 92, 93, 69, 80, and 4%, respectively.     

Investigation of Some Functionalization Reactions of 4‐Benzoyl‐5‐phenyl‐1‐(4‐methoxyphenyl)‐1H‐pyrazole‐3‐carbonyl Chloride and Their Antimicrobial Activity

The 1H‐pyrazole‐3‐carboxylic acid 1 was converted via reactions of its acid chloride 3 with various asymmetrical disubstituted urea and alcohol derivatives into the corresponding novel 4‐benzoyl‐N‐(N′,N′‐dialkylcarbamyl)‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxamide 4a , b and alkyl 4‐benzoyl‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxylate 7a‐c , respectively, in good yields (57%‐78%). Friedel‐Crafts reactions of 3 with aromatic compouns for 15 min.‐2 h led to the formation of the 4‐3‐diaroyl‐1‐(4‐hydroxyphenyl)‐5‐phenyl‐1H‐pyrazoles 9a‐c , 4‐benzoyl‐1‐(4‐methoxyphenyl)‐3‐aroyl‐5‐phenyl‐1H‐pyrazoles 10a , b and than from the acylation reactions of 9a‐c were obtained the 3,4‐diaroyl‐1‐(4‐acyloxyphenyl)‐5‐phenyl‐1H‐pyrazoles 13a‐d . The structures of all new synthesized compounds were established by NMR experiments such as ¹H, and ¹³C, as well as 2D COSY and IR spectroscopic data, and elemental analyses. All the compounds were evaluated for their antimicrobial activities (agar diffusion method) against eight bacteria and two yeasts.     

Nitropyrazoles 22. On reactivity of 3,5-dinitro-4-(phenylsulfonyl)pyrazole and its N-methyl derivative

3,5-Dinitro-4-(phenylsulfonyl)pyrazole (5) obtained by oxidation of 3,5-dinitro-4-(phenylthio)pyrazole with 30% H₂O₂ in AcOH was involved into nucleophilic substitution reaction with thiophenol, which proceeded with substitution of the phenylsulfonyl group at position 4. N-Methyl-3,5-dinitro-4-(phenylsulfonyl)pyrazole obtained by methylation of 5 with dimethyl sulfate was involved into nucleophilic substitution reaction with thiophenol, p-bromophenol, and morpholine with the regioselective substitution of the nitro group at position 5 to form 5-R-3-nitro-4-(phenylsulfonyl)pyrazoles.     

Nitropyrazoles 17. Synthesis of 1-(3,5-dinitrophenyl)-4-methyl-3,5-dinitropyrazole and the study of its chemical transformations

A new one-step method for the synthesis of 4-methyl-3(5)-nitropyrazole by nitration of 4-methylpyrazole is developed. Arylation of 4-methyl-3(5)-nitropyrazole with 1,3,5-trinitrobenzene gives 1-(3,5-dinitrophenyl)-4-methyl-3-nitropyrazole, nitration of which leads to 1-(3,5-dinitrophenyl)-4-methyl-3,5-dinitropyrazole. The action of 1 equiv. of an O- or S-nucleophile (phenolate, p-chlorobenzenethiolate and ethoxide ions; anions of glycolanilide and thioglycolanilide) on 1-(3,5-dinitrophenyl)-4-methyl-3,5-dinitropyrazole led to the substitution of the 5-NO₂ group of the pyrazole ring; under the action of one more equivalent of a nucleophile the NO₂ group of the benzene ring was substituted. The substitution product of the anion of thioglycolanilide for the 5-NO₂ group undergoes the intramolecular cyclization — oxidative nucleophilic hydrogen substitution in the benzene ring under the action of K₂CO₃.     

Brominated Trihalomethylenones as Versatile Precursors to 3‐Ethoxy, ‐Formyl, ‐Azidomethyl, ‐Triazolyl,and 3‐Aminomethyl Pyrazoles

5‐Bromo[5,5‐dibromo]‐1,1,1‐trihalo‐4‐methoxy‐3‐penten[hexen]‐2‐ones are explored as precursors to the synthesis of 3‐ethoxymethyl‐5‐trifluoromethyl‐1H‐pyrazoles from a cyclocondensation reaction with hydrazine monohydrate in ethanol. 3‐Ethoxymethyl‐carboxyethyl ester pyrazoles were formed as a result of a substitution reaction of bromine and chlorine by ethanol. The dibrominated precursor furnished 3‐acetal‐pyrazole that was easily hydrolyzed to formyl group. In addition, brominated precursors were used in a nucleophilic substitution reaction with sodium azide to synthesize the 3‐azidomethyl‐5‐ethoxycarbonyl‐1H‐pyrazole from the reaction with hydrazine monohydrate. These products were submitted to a cycloaddition reaction with phenyl acetylene furnishing the 3‐[4(5)‐phenyl‐1,2,3‐triazolyl]5‐ ethoxycarbonyl‐1H‐pyrazoles and to reduction conditions resulting in 3‐aminomethyl‐1H‐pyrazole‐5‐carboxyethyl ester. The products were obtained by a simple methodology and in moderate to good yields.     

Synthesis of 1-Aryl-1H-pyrazolecarbonitriles and related derivatives

The synthesis of 1-aryl-5-cyano-1H-pyrazole-4-carboxylic acid, ethyl esters 1 is described. Subsequent chemistry led to relatively simple and unique pyrazole derivatives. Most important of these are 1-aryl-5-(aminocarbonyl)-1H-pyrazole-4-carboxylic acids 2, which are chemical hybridizing agents in wheat and barley. The regioselective hydrolysis of 1-(3-chlorophenyl)-1H-pyrazole-4,5-dicarboxylic acid, dimethyl ester (7b) and subsequent chemistry is also described.     

Nitropyrazoles

A preparative method ofN-amination of pyrazoles bearing nitro groups and other electron withdrawing substituents in the pyrazole ring with hydroxylamine-O-sulfonic acid involving control of the pH of the medium has been elaborated. A series of previously unknown pyrazoles has been prepared. Basicities of 1-aminopyrazole and 1-amino-4-nitropyrazole have been measured and differences between the basicities of theC- andN-amino groups for the pyrazole series have been revealed.For part 3, see ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1434–1436, August, 1993.     

Synthesis and properties of 5-chloro-4-nitropyrazoles

The nitration of 5-chloropyrazoles with a mixture of 100% nitric acid and 65% oleum or a mixture of 60% nitric acid and polyphosphoric acid gave substituted 5-chloro-4-nitropyrazoles in 45–91% yield. The nitration of 3-aryl-5-halopyrazoles was accompanied by introduction of a nitro group into the aromatic ring. 4-Chloropyrazoles failed to undergo nitration under these conditions. The reaction of 5-chloro-1,3-dimethyl-4-nitropyrazole with ethyl cyanoacetate in DMSO in the presence of K₂CO₃ led to the formation of ethyl 2-cyano-2-(1,3-dimethyl-4-nitro-1H-pyrazol-5-yl)acetate.     

Carbon-13 nuclear magnetic resonance study of a new ring-chain tautomerism of some pyridazine derivatives

The ¹³C NMR spectra of a number of pyridazine derivatives have been recorded in DMSO-d₆ solution and analysed. Examination of the most diagnostic resonances, with particular emphasis on those arising from the pyridazine ring system, enabled the ready establishment of the presence of a ring-chain tautomerism in 5-(o-aminophenylcarbamoyl)pyridazine-4-carboxylic acid, methyl 5-(o-aminophenylcarbamoyl)pyridazine-4-carboxylate, 5-(o-aminophenylcarbamoyl)-3,6,-dimethylpyridazine-4-carboxylic acid and 5-(2-amino-1,2-dicyanovinylenecarbamoyl)pyridazine-4-carboxylic acid. This gave rise to 3′,4′-dihydro-3′-oxospiro[pyridazine-5(2H),2′(1H)-quinoxaline]-4-carboxylic acid, methyl 3′,4′-dihydro-3′oxospiro[pyridazine-5(2H),2′(1′H)-quinoxaline]-4-carboxylate, 3′,4′-dihydro-3′-oxo-3,6-dimethylspiro[pyridazine-5(2H), 2′(1′H)-quinoxaline]-4-carboxylic acid and 5-oxo-2,3-dicyano-1,4,8,9-tetraazaspiro[5.5]undeca-2,7,10-triene-11-carboxylic acid, respectively.     

New approach to electrochemical iodination of arenes exemplified by the synthesis of 4-iodopyrazoles of different structures

The two-stage electrosynthesis of 4-iodosubstituted pyrazole derivatives was performed. At the first stage, KIO₃ was obtained at the Ni anode under the undivided galvanostatic conditions of electrolysis of an aqueous alkaline solution of KI (or I₂) at the Ni anode. At the second stage, pyrazole and its derivatives were iodinated in the heterophase (H₂O-CHCl₃ (CCl₄)) medium by the KIO₃-KI (or KIO₃-I₂) system in the presence of H₂SO₄. The yields of iodopyrazoles were 74–92%. The electrochemical iodination of anisole, 2-methylpyrazole, and thiophene was carried out to form 4-iodoanisole (88% yield), 4,5-diiodo-2-methylimidazole (54% yield), and a mixture of 2-iodothiophene (60% yield) and 2,5-diiodothiophene (4% yield).     

Electrosynthesis of 4-chloro derivatives of pyrazole and alkylpyrazoles

Electrosynthesis of 4-chloro-substituted derivatives of pyrazole and its alkyl derivatives is carried out via the chlorination of original pyrazoles on a Pt anode in aqueous NaCl solutions under conditions of galvanostatic diaphragm electrolysis. The efficiency of this process is shown to depend on the structure of starting pyrazoles, particularly, the donor-acceptor properties of substituents, the position of the latter in the pyrazole ring, and the concomitant contribution of side reactions. Thus the yield of 4-chlorosubstituted products at the chlorination of pyrazole, 3,5-dimethylpyrazole, 1,5-dimethylpyrazole, and 3-nitropyrazole is 68, 92, 53, and 79%, respectively. By the example of 1,5-dimethylpyrazole, the possibility of electrochemical chlorination to the side chain of pyrazoles was demonstrated.     

A Theoretical Study on the Tautomerism of C-Carboxylic and Methoxycarbonyl Substituted Azoles

DFT calculations (B3LYP/6-31+G^**) have been carried out on 106 tautomers and conformers of NH-azoles bearing CO₂H and CO₂CH₃ groups. The following azoles systems have been studied: 2-substituted pyrroles, 2-substituted indoles, 2-substituted imidazoles, 2-substituted benzimidazoles, 4(5)-substituted imidazoles, 3(5)-substituted pyrazoles, 3-substituted indazoles (1H and 2H), 3,4(5)-substituted-1,2,3(5)-triazoles, 2,3(5)-substituted-1,2(3),4-triazoles, 4(5)-1,2,3,4(5)-tetrazoles. In the case of pyrazole, 3,5-disubstituted derivatives have also been computed, including four dimers.Dedicated to our friend Professor Vladimir I. Minkin on his 70th anniversary.     

Oxidation of pyrazoles containing the 2-hydroxyethyl group on a NiO(OH) electrode in aqueous alkali

The electrooxidation of pyrazoles containing hydroxyethyl group bound with the pyrazole ring at its N and C atoms (1-(2-hydroxyethyl)pyrazole and (4-(2-hydroxyethyl)pyrazole, respectively) in an undivided cell on a NiO(OH) electrode in aqueous alkali is studied. The oxidation of 1-(2-hydroxyethyl)pyrazole is shown to result in the formation of pyrazole-1-acetic acid with a yield of 80.0%. In the case of 4-(2-hydroxyethyl)pyrazole the process proceeds more exhaustively, leading to the formation of pyrazole-4-carboxylic acid as the major product with a yield of 57.0%. The regularities of these processes are discussed.     

Regiospecific one‐pot synthesis of new trifluoromethyl substituted heteroaryl pyrazolyl ketones

A convenient and general method for the regiospecific synthesis of three novel series of 1‐(2‐thenoyl)‐, 1‐(2‐furoyl)‐ and 1‐(isonicotinoyl)‐3‐alkyl(aryl)‐5‐hydroxy‐5‐trifluoromethyl‐4,5‐dihydro‐1H‐pyrazoles, in good yields (53 – 91 %), from the cyclocondensation reactions of 1,1,1‐trifluoro‐4‐alkoxy‐4‐alkyl(aryl)‐but‐3‐en‐2‐ones, where alkyl = H and Me; aryl = ‐C₆H₅, 4‐CH₃C₆H₄, 4‐CH₃OC₆H₄, 4‐FC₆H₄, 4‐ClC₆H₄, 4‐BrC₆H₄, 4‐NO₂CgH₄ with 2‐thiophenecarboxylic hydrazide, furoic hydrazide and isonicotinic acid hydrazide, respectively, is reported. Subsequently dehydration reaction of phenyl substituted 2‐pyrazolines with P₂O₅ furnished the corresponding 1H‐pyrazoles as mixture of regioisomers and in low yields (35 – 36 %).     

One‐pot synthesis of aryl and heteroaroyl‐substituted hydroxypyrazolines from the reactions of β‐alkoxyvinyl trichloromethyl ketones with heteroarylhydrazides

The one‐step regiospecific synthesis of a novel series of 10 trichloromethyl‐, aryl‐, and heteroaroyl‐substituted 5‐hydroxy‐2‐pyrazolines affords 1‐(2‐thenoyl)‐, 1‐(2‐furoyl)‐, and 1‐(isonicotinoyl)‐3‐aryl‐5‐hydroxy‐5‐trichloromethyl‐4,5‐dihydro‐1H‐pyrazoles in 63–92% yields from the cyclocondensation reactions of 1,1,1‐trichloro‐4‐methoxy‐4‐aryl‐3‐buten‐2‐ones (where aryl substituents are –C₆H₅, 4‐CH₃C₆H₄, 4‐OCH₃C₆H₄, 4‐FC₆H₄, 4‐ClC₆H₄, 4‐BrC₆H₄) with 2‐thiophenecarboxylic hydrazide, furoic hydrazide, and isonicotinic acid hydrazide, respectively. Dehydration reaction of two 2‐pyrazolines with P₂O₅ furnished the corresponding 1H‐pyrazoles in low yields (21–29%). © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:685–691, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20261     

Synthesis of 3‐Substituted‐1‐methyl‐1H‐thieno[2,3‐c]pyrazoles

We report a simple and practical six‐step synthesis of new 1‐methyl‐1H‐thieno[2,3‐c]pyrazoles from 3‐amino‐1H‐pyrazole‐4‐carboxylic acid ethyl ester.     

Reactions of 3-chloro-6-hydrazinopyridazine with michael-retro-michael reagents

Although pyrazole formation results from treatment of 3-chloro-6-hydrazinopyridazine ( 2 ) with both ethoxymethylenemalononitrile and ethyl (ethoxymethylene)cyanoacetate, 6-chlorotriazolo[4,3-b]pyridazine ( 5 ) was produced (75% yield) when 2 was treated with diethyl ethoxymethylenemalonate. Treatment of 2 with diethyl acetylmalonate ( 8 ) gave both 6-chloro-3-methyltriazolo[4,3-b]pyridazine ( 10 ) and 5-hydroxy-3-methyl-1-(6-chloro-3-pyridazinyl)-1H-pyrazole-4-carboxylic acid ethyl ester ( 12 ). Pyrazole 12 was initially isolated as a salt of triazolopyridazine 10 .