Synthesis, molecular, and crystal structure of 3,4-bis[(2,6-di-tert-butyl-4H-pyran-4-ylidene)methyl]cyclobut-3-ene-1,2-dione and -1,2-dithione

Two new dyes have been prepared, 3,4-bis[(2,6-di-tert-butyl-4H-pyran-4-ylidene)methyl]-cyclobut-3-ene-1,2-dione and -1,2-dithione. Their molecular and crystal structures have been studied by X-ray diffraction, and their spectral properties have been characterized. The heterocyclic fragments in the dyes molecules are in the trans-position with respect to the bonds connecting chromophore CH group with the 4-membered ring. Substitution of the carbonyl oxygen to sulfur leads to change in the crystal packing.     

Synthesis of 4-[(p-alkylanilino-p-alkylphenyl)methyl]-4-butyl-1,2-diphenylpyrazolidine-3,5-diones

4-Butyl-1,2-diphenylpyrazolidine-3,5-dione derivatives were prepared by its condensation with Schiff bases formed from p-aminobenzoic acid and its methyl and ethyl esters as amine components and substituted aromatic aldehydes.     

3-methylthio-1,2-dithiolylium salts—II: Reaction with 4-hydroxy-3h-pyran-2,6-dione. 1,3-bis-(1,2-dithiol-3-ylidene)-2-propanones

A simple route to the hitherto unknown 1,3-bis-(1,2-dithiol-3-ylidene)-2-propanones is reported: 3-Methylthio-1,2-dithiolylium salts condense with 4-hydroxy-3H-pyran-2,6-dione to 3,5-bis-(1,dithol-3-ylidene)pyran-2,4,6-triones, which are converted by acidic hydrolysis into the propanones.     

Convenient method for the synthesis of 5-(4-methoxyphenyl)-3H-1,2-dithiole-3-thione (ADT-OMe) and 5-(4-hydroxyphenyl)-3H-1,2-dithiol-3-thione (ADT-OH) using microwave irradiation

A convenient method is described for the rapid synthesis of 5-(4-methoxyphenyl)-3H-1,2-dithiole-3-thione (ADT-OMe) from anethole and elemental sulfur using microwave irradiation. Various reaction conditions were applied to reduce the reaction time from several hours to 10 min, resulting in an improvement in yield and overcoming the undesired by-product formation associated with conventional methods. 5-(4-Hydroxyphenyl)-3H-1,2-dithiol-3-thione (ADT-OH) was obtained by the deprotection of ADT-OMe using pyridine hydrochloride under microwave irradiation.     

Synthesis of 5-substituted 3-[5-(2,5-dimethylphenyl)-1,2-oxazol-3-yl]-1,2,4-oxadiazoles

5-(2,5-Dimethylphenyl)-1,2-oxazole-3-carbaldehyde oxime reacted with acetic anhydride in pyridine to give 5-(2,5-dimethylphenyl)-1,2-oxazole-3-carbonitrile which was converted into the corresponding amide oxime by treatment with hydroxylamine. O-Acyl derivatives of N′-hydroxy-5-(2,5-dimethylphenyl)-1,2-oxazole-3-carboximidamide underwent heterocyclization into 5-substituted 3-[5-(2,5-dimethylphenyl)-1,2-oxazol-3-yl]-1,2,4-oxadiazoles on heating in acetic acid.     

Unusual reaction of 4-[(3-carboxypropyl)amino]-6-chloro-5-nitrobenzofuroxan with 3-aminopropane-1,2-diol 1,2-dinitrate

Reaction of 4-[(3-carboxypropyl)amino]-6-chloro-5-nitrobenzofuroxan with 3-aminopropane-1,2-diol 1,2-dinitrate yielded 6-chloro-5-nitro-4-(2-oxopyrrolidin-1-yl)benzofuroxan instead of the expected 6-chloro-5-nitrobenzofuroxan amino derivative.     

Synthesis of methyl (E)-2-[(3S,4S)-4-hydroxy-3-(pent-3-yloxy)-pyrrolidin-2-ylidene]propanoate and its unusual recyclization

Methyl (2E,4S,5S)-5-hydroxy-6-mesyloxy-2-methyl-4-(pent-3-yloxy)hex-2-enoate was synthesized from l-tartaric acid. Attempted substitution of the mesyloxy group by the reaction with NaN₃ directly led to methyl (E)-2-[(3S,4S)-4-hydroxy-3-(pent-3-yloxy)pyrrolidin-2-ylidene]propanoate. The latter on treatment with CF₃COOH and then NaOH gave methyl (2E)-2-methyl-4-[(S)-oxiran-2-yl]-4-(pent-3-yloxy)but-2-enoate.     

Density functional theory study on the identification of 3-[(2-morpholinoethylimino)methyl]benzene-1,2-diol

This study deals with the identification of a title compound, 3-[(2-morpholinoethylimino)methyl]benzene-1,2-diol by means of quantum chemical calculations. The optimized molecular structures, vibrational frequencies and corresponding vibrational assignments, thermodynamic properties, charge analyses, nuclear magnetic resonance (NMR) chemical shifts and ultraviolet-visible (UV-vis) spectra of the title molecule in the ground state were evaluated using density functional theory (DFT) with the standard B3LYP/6-311++G(d,p) method and basis set combination for the first time. Theoretical vibrational spectra of the title compound were interpreted with the aid of normal coordinate analysis based on scaled density functional force field. The results show that the obtained optimized geometric parameters (bond lengths, bond angles and bond dihedrals) and vibrational frequencies were observed to be in good agreement with the available experimental results. Moreover, the calculations of the electronic spectra, (13)C and (1)H chemical shifts were compared with the experimental ones. Furthermore, we not only simulated the frontier molecular orbitals (FMO) and molecular electrostatic potential (MEP) but also determined the transition states and energy band gaps, as well. It was found that charge analyses supported the evidences of MEP. Infrared intensities and Raman activities were also reported.     

F-Induced decomposition of 3-[(3-tert-butyldimethylsiloxy)phennoxy]-3-phenyl-1,2-dioxetanes without C---C bond cleavage of the dioxetane ring

F⁻-induced decomposition of 3-[3-(tert-butyldimethylsiloxy)phenoxy]-3-phenyl-1,2-dioxetane (5c) yielded an intramolecular redox product (7b), whereas 3-phenoxy-3-(3-siloxyphenyl)-1,2-dioxetane (3) gave normal carbonyl fragments with intense light emission. An isomer (5a) gave light with normal decomposition by CIEEL, though the major process was one to yield an acyloin (7a).     

Wittig rearrangement of 1-[(1E)-3-(Benzyloxy)prop-1-en-1-yl]adamantane

Wittig rearrangement of an allyl benzyl ether containing an adamantane fragment has been studied. 1-[(1E)-3-(Benzyloxy)prop-1-en-1-yl]adamantane reacts with butyllithium to give [2,3]- and [1,2]-rearrangement products. The [2,3]-rearrangement product is a mixture of threo and erythro diastereoisomers, the latter prevailing.     

Condensation of methyl 2-chloro-3-(3-nitrophenyl)-2,3-epoxypropionate with 1,2-phenylene diamine

It is established that the -chloroepoxide methyl 2-chloro-3-(3-nitrophenyl)-2, 3-epoxypropionate, in contrast to its a-chloroketone isomer methyl 3-(3-nitrophenyl-3-chloro-2-oxopropionate, forms 2-(3-nitrophenyl-3methoxycarbonylquinoxaline in reaction with 1,2-phenylene diamine, whereas the condensation of the achloroketone with 1,2 phenylene diamine gives 3-(-chloro-3-nitrophenyl)-2-oxo-1,2-dihydroquinoxaline.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1105-1108, August, 1994.     

Reactions of 1,2-di(2-thienyl)-3,4-bis[(2,4,6-tri-t-butylphenyl)phosphinidene]cyclobutene

Reactions of a sterically protected 1,2-di(2-thienyl)-3,4-bis[(2,4,6-tri-t-butylphenyl)phosphinidene]cyclobutene were investigated. The diphosphinidenecyclobutene reacted with elemental sulfur or transition metal reagents to form a thiaphosphirane derivative or the corresponding transition metal complexes, respectively. Reactions of the di(2-thienyl)diphosphinidenecyclobutene with butyllithium followed by treatment with electrophiles afforded functionalized di(2-thienyl)diphosphinidenecyclobutene derivatives.     

[3 + 2]-Cycloaddition of azomethine ylide at 1,3-dimethyl-6-(2-oxo-1,2-dihydro-3H-indol-3-ylidene)-3a,9a-diphenyl-3,3a,9,9a-tetrahydroimidazo[4,5-e][1,3]thiazolo[3,2-b][1,2,4]triazine-2,7(1H,6H)-diones

[3 + 2]-Cycloaddition of azomethine ylide generated from formaldehyde and sarcosine at the double bond of 1,3-dimethyl-6-(2-oxo-1,2-dihydro-3H-indol-3-ylidene)-3a,9a-diphenyl-3,3a,9,9a-tetrahydroimidazo[4,5e][1,3]thiazolo[3,2-b][1,2,4]triazine-2,7(1H,6H)-diones occurs stereospecifically at the face opposite to the phenyl substituents. Product 3a crystallizes as a conglomerate.     

F-Induced decomposition of 3-[(3-tert-butyldimethylsiloxy)phennoxy]-3-phenyl-1,2-dioxetanes without CC bond cleavage of the dioxetane ring

F⁻-induced decomposition of 3-[3-(tert-butyldimethylsiloxy)phenoxy]-3-phenyl-1,2-dioxetane (5c) yielded an intramolecular redox product (7b), whereas 3-phenoxy-3-(3-siloxyphenyl)-1,2-dioxetane (3) gave normal carbonyl fragments with intense light emission. An isomer (5a) gave light with normal decomposition by CIEEL, though the major process was one to yield an acyloin (7a).     

1,2-Bis-[(5-methyl/chloro/nitro)-2-1H-benzimidazolyl]-1,2-ethanediols and their PdCl2 complexes

1,2-Bis-[(5-methyl)-2-1H-benzimidazolyl]- (L ¹), 1,2-bis-[(5-chloro)-2-1H-benzimidazolyl]- (L ²), 1,2-bis-[(5-nitro)-2-1H-benzimidazolyl]-1,2-ethanediol (L ³) and their PdCl₂ complexes were synthesized and characterized by elemental analysis, molar conductivity, i.r. and ¹H-n.m.r. spectra. The benzene ring substituents lead to a decrease in melting point. The methyl group reduces the solubility and the acidity of L ¹ and Pd(L ¹)Cl₂, whereas the Cl and NO₂ groups increase the solubility and the acidity of L ², L ³, Pd(L ²)Cl₂ and Pd(L ³)Cl₂. In Pd(L ¹)Cl₂ and Pd(L ²)Cl₂ complexes, the ligands act as a bidentate through two nitrogen atoms. In Pd(L ³)Cl₂, ligand coordination occurs through one OH group oxygen atom and one of the benzimidazole nitrogen atoms.     

Coordination compounds of copper(II) with substituted 3-{[(2-hydroxyphenyl)methylidene]amino}propane-1,2-diols

3-{[(2-Hydroxyphenyl)methylidene]amino}propane-1,2-diol, its 5-chloro-,5-bromo-, 5-nitro-, 3-methoxy derivatives, and 3-{[(2-hydroxynaphthyl-1)methylidene]amino}propane-1,2-diol react with hydrates of copper(II) chloride, bromide and nitrate in ethanol to form coordination compounds Cu(L)X·nH₂O. Template condensation reaction between 3-aminopropane-1,2-diol and 2,3-, 2,4- or 2,5-dihydroxybenzaldehyde in the presence of copper(II) nitrate trihydrate results in similar compounds Cu(L)NO₃·nH₂O. Structure of some of the condensation products was identified by X-ray analysis. Thermolysis of the substances obtained occurs through the dehydration step (70–90°C) and complete thermal decomposition (290–560°C).     

Synthesis of 5-mercapto-1,2-dithiole-3-thiones and their transformation into 5-chloro-1,2-dithiol-3-ones

A number of 4-dialkylamino-5-mercapto-1,2-dithiole-3-thiones were synthesized by reactions of alkyl(diisopropyl)amines with S₂Cl₂. Their reactions with S₂Cl₂—DABCO unexpectedly gave 5-chloro-4-dialkylamino-1,2-dithiol-3-ones. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 143–147, January, 2006.     

Synthesis of [1,2-3H2]-polystyrene

The synthesis of [1,2-³H₂]-polystyrene consisted of a two step reaction. First catalytic tritium gas addition to phenylacetylene was used to prepare [1,2-³H₂]-styrene and then it was polymerized to [1,2-³H₂]-polystyrene in the present of an initiator.     

New use of bis(benzotriazolyl)-1,2-(dialkylamino)ethanes for the synthesis of 2-H-3-dialkylamino imidazo[1,2-a]pyrazine derivatives

First direct synthesis of 2-H-3-N-dialkyl-imidazo[1,2-a]pyrazines is described. This approach makes use of accessible substituted pyrazines and the assistance of benzotriazole. In such a manner we accomplished the introduction of cyclic amines at C-3 of the scaffold in a convenient formal cyclisation procedure. Detailed examples and utility of this approach are presented herein.     

Molecular structures of methyl 4-[(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)methyl]-1-methyl-1H-pyrazol-5-carboxylate and methyl 4-[(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)methyl]-1-methyl-1H-pyrazol-3-carboxylate

The structure of methyl 4-[(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)methyl]-1-methyl-1H-pyrazol-5-carboxylate is determined by X-ray crystallography and further used to elucidate the structure of methyl 4-[(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)methyl]-1-methyl-1H-pyrazol-3-carboxylate, using the data of homo- and heteronuclear 2D NMR correlation spectroscopy.