Transport of poly-L-lysine into oppositely charged poly(acrylic acid) microgels and its effect on gel deswelling

The interaction between poly-L-lysine (pLys) and oppositely charged poly(acrylic acid) (pAA) microgels (? approximately 80-120 microm) was studied by micromanipulator-assisted light microscopy and confocal laser scanning microscopy. The aim of this study was to investigate effects of peptide size, pH, and salt concentration on binding, transport, and distribution of pLys in pAA microgel particles and thereby also to outline the details of the gel deswelling in response to pLys binding and incorporation. Both peptide distribution and gel deswelling kinetics were found to be strongly influenced by the pLys molecular weight, originating partly from limited entry of large peptides into the gel particle core. Also pH was shown to influence both deswelling and pLys incorporation kinetics, with a decreased deswelling rate observed with increasing pH. These effects are determined by a complex interplay between the pH-dependence of both pLys and the gel network, also influencing volume transitions of the latter. Finally, salt concentration was shown to have a significant effect on both gel deswelling rate and pLys transport, with an increased electrolyte concentration resulting in decreased deswelling rate but also in an increased peptide transport rate within the microgel particles.     

Thermodynamics of temperature-sensitive polyether-modified poly(acrylic acid) microgels

The temperature-induced structural changes and thermodynamics of ionic microgels based on poly(acrylic acid) (PAA) networks bonded with poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) (Pluronic) copolymers have been studied by small-angle neutron scattering (SANS), ultra-small-angle neutron scattering (USANS), differential scanning calorimetry (DSC), and equilibrium swelling techniques. Aggregation within microgels based on PAA and either the hydrophobic Pluronic L92 (average composition, EO8PO52EO8; PPO content, 80%) or the hydrophilic Pluronic F127 (average composition, EO99PO67EO99; PPO content, 30%) was studied and compared to that in the solutions of the parent Pluronic. The neutron scattering results indicate the formation of micelle-like aggregates within the F127-based microgel particles, while the L92-based microgels formed fractal structures of dense nanoparticles. The microgels exhibit thermodynamically favorable volume phase transitions within certain temperature ranges due to reversible aggregation of the PPO chains, which occurs because of hydrophobic associations. The values of the apparent standard enthalpy of aggregation in the microgel suspensions indicate aggregation of hydrophobic clusters that are more hydrophobic than the un-cross-linked PPO chains in the Pluronic. Differences in the PPO content in Pluronics L92 and F127 result in a higher hydrophobicity of the resulting L92-PAA-EGDMAmicrogels and a larger presence of hydrophobic, densely cross-linked clusters that aggregate into supramolecular structures rather than micelle-like aggregates such as those formed in the F127-PAA-EGDMA microgels.     

Kinetics of swelling of polyether-modified poly(acrylic acid) microgels with permanent and degradable cross-links

Spherical particles of 50-100 mum size composed of poly(acrylic acid) networks covalently bonded to Pluronic polyether copolymers were tested for swelling in aqueous media. The microgels were cross-linked either by permanent ethylene glycol dimethacrylate (EGDMA) cross-links alone or by EDGMA together with reversible disulfide or biodegradable azoaromatic cross-links. Optimum conditions for a rapid, diffusion-limited swelling of the pH- and temperature-sensitive microgels with nondegradable cross-links were found. The microgels cross-linked by disulfide groups and equilibrium-swollen in the buffer solution exhibited degradation-limited kinetics of swelling under physiological conditions, with a first-order reaction constant, k(1), linearly proportional to the concentration of reducing agents such as dithiotreitol and tris(2-carboxyethyl)phosphine (TCEP). A severalfold faster swelling in the presence of more powerful reducing agent, TCEP, was observed, indicating the chemical specificity of the microgel swelling. The reoxidation of the thiol groups into disulfide cross-links by sodium hypochlorite led to the restoration of the microgels' diameter measured prior to the reduction-reoxidation cycle, which confirms the shape memory of the microgels. Enzymatically degradable azoaromatic cross-links enabled slow microgel swelling due to degradation of the cross-links by azoreductases from the rat intestinal cecum. The low rate of swelling of the Pluronic-containing microgels can enable sustained drug release in colon-specific drug delivery.     

Complexation between poly(acrylic acid) and poly(vinylpyrrolidone): Influence of the molecular weight of poly(acrylic acid) and small molecule salt on the complexation

Poly(acrylic acid) (PAA) with different molecular weight and poly(vinylpyrrolidone) (PVP) were prepared by free radical polymerization using 2,2′-azoisobutyronitrile (AIBN) as initiator in anhydrous methanol for PAA, and in distilled water for PVP. Then, the complexation between PAA and PVP in aqueous solution was studied by UV transmittance measurement and fluorescence probe technique. The result shows that (1) at low pH, the formation of complexation between PAA and PVP bases on the intermacromolecular hydrogen bond and the composition of the formed complex is around 3:2 (the unit molar ratio of PAA to PVP) at pH 2.60 over the range of pH investigated. (2) The cooperative interaction through the formation of hydrogen bond among active sites plays an important role in complex formation, and depends on the pH of solution, the required minimum chain length of poly(acrylic acid). (3) The hydrogen bond is not affected by small molecular salt, which only affects those carboxylic groups without forming hydrogen bond on the PAA chain.     

Structure and pH‐sensitive properties of poly (vinylidene fluoride) membrane changed by blending poly (acrylic acid) microgels

pH‐sensitive poly (vinylidene fluoride) (PVDF)/poly (acrylic acid) (PAA) microgels membranes are prepared by phase inversion of the N, N‐dimethylformamide solution containing PAA microgels and PVDF in aqueous solution. The composition and structure of the blend membrane are investigated by Fourier transform infrared spectra, X‐ray photoelectron spectroscopy measurements, thermo gravimetric analysis, field‐emission scanning electron microscope and atomic force microscope. The results indicate the surface and cross section of the blend membranes have a porous structure with PAA microgels immobilized inside the pore and on the membrane surface. The blend PVDF membranes exhibit pH‐sensitive water flux, with the most drastic change in permeability observed between pH 3.7 and 6.3. The blend membranes are fouled by bovine serum albumin, and their antifouling property is enhanced by increasing PAA microgels, mainly derived from the improved hydrophilic property. Copyright © 2013 John Wiley & Sons, Ltd.     

Interaction between pentaethylene glycol n-octyl ether and poly(acrylic acid): effect of the polymer molecular weight

The effect of the polymer molecular weight on the interaction between pentaethylene glycol n-octyl ether (C(8)E(5)) and poly(acrylic acid) (PAA) has been investigated by a combined experimental strategy including tensiometry, potentiometry, calorimetry, fluorescence quenching and intradiffusion (pulsed gradient spin echo-NMR) measurements. PAA samples with an average molecular weight varying in a wide range (M (w)=2000, 100,000, 250,000, and 450,000) have been considered. The measurements have been performed at constant polymer concentration (0.1% w/w) with varying surfactant molality. In all the considered systems, at low surfactant concentration, adsorption of surfactant monomers onto the polymer chain has been detected. At a C(8)E(5) molality (T(1)) independent of the PAA M (w), surfactant molecules start to aggregate, forming clusters to which the polymer co-participates. Above this concentration, the behavior of the system depends on M (w). In fact, if polymer samples with high molecular weight (M (w)100,000) are employed, all the added surfactant aggregates onto the polymer leading to the polymer saturation and, subsequently, to free micelles formation. Both saturation and free micellization occur at surfactant concentrations which are independent of the polymer molecular weight. C(8)E(5) aqueous mixtures containing PAA with low molecular weight (M (w)=2000) behaves differently, in that, above T(1), only a fraction ( approximately 20%) of the added surfactant molecules interact with the polymer, forming aggregates to which more than one PAA chain participate. In this case, C(8)E(5) free micellization occurs before polymer saturation. The experimental evidences have been interpreted in terms of the subtle balance between the various molecular interactions driving the surfactant-polymer aggregation.     

Effects of addition of anionic and cationic surfactants to poly(N-isopropylacrylamide) microgels with and without acrylic acid groups

The interaction of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant hexadecyl trimethyl ammonium bromide with poly(N-isopropylacrylamide) (PNIPAAM) microgels with and without poly(acrylic acid) (PAA) was investigated by means of dynamic light scattering (DLS), zeta potential, and turbidimetry measurements. The DLS results show that the PNIPAAM microgels with PAA will contract when an anionic or cationic surfactant is added to the suspension, while the PNIPAAM microgels without PAA expand in the presence of an ionic surfactant. A collapse of the PNIPAAM microgels is observed when the temperature is increased. From the zeta potential measurements, it is observed that the charge density of PNIPAAM microgels in the presence of an ionic surfactant is significantly affected by temperature and the attachment of the negatively charged PAA groups. The turbidity measurements clearly indicate that the interaction between PNIPAAM and SDS is more pronounced than that of the cationic surfactant.     

Structure and sorption properties of the polyion complex between poly(acrylic acid) and poly(4-vinylpyridine)

A polyion complex was formed from poly(acrylic acid) (PAA) and poly(4-vinylpyridine) (PVP). Its structure and composition were examined by means of infrared spectroscopy (IR), x-ray photoelectron spectroscopy (XPS), and elemental analysis. The polyion complex was obtained by dissolving PAA and PVP together in methanol. The composition of the polyion complex was independent of stirring speed, mixing sequence, and standing time after mixing. However, the composition depended on the concentrations and the ratio of the components in the reaction mixture. Excess of PAA in the product was observed when concentrated solutions (2.0 × 10^?1M) were used for the preparation or when an excess of PAA was added to PVP. The sorption of water vapor by an equimolar PAA/PVP complex at 293 and 303 K was higher than that by the pure components, especially in the low- and middle-pressure regions. In the high-pressure region, however, the uptake was not affected by the complex formation. While hydrogen bond interactions in general decrease sorption, Coulombic interactions between polymer chains increased the sorption capacity.     

Fluorescence staining and confocal laser scanning microscopy study of hydrogen-bonded poly(vinylpyrrolidone)/poly(acrylic acid) film

Poly(vinylpyrrolidone) (PVPON) and poly(acrylic acid) (PAA) were layer-by-layer (LBL) assembled to prepare the thin films based on hydrogen-bonding complexation. The hydrogen-bonded PVPON/PAA films were incubated in acidic, neutral and basic vapors separately. To study the morphologies after incubation, the films were stained by pH-sensitive fluorescent dyes using chemical and physical ways, and investigated with confocal laser scanning microscope (CLSM). The chemical way (labeling) was covalently linking fluoresceinamine (FAM) to some monomer units of PAA while the physical way was adsorbing rhodamine B (RB) molecules from dilute solution. Atomic force microscope (AFM) was combined with CLSM to find that after incubation in neutral or basic vapor the hydrogen-bonded PVPON/PAA films form porous structure and the pores are through the whole film.     

The synthesis and characterization of monodisperse poly(acrylic acid) and poly(methacrylic acid)

A number of polyacrylic (PAA) and polymethacrylic (PMAA) acids have been synthesized by living anionic polymerization of the monomeric tert-butyl esters followed by subsequent hydrolysis of the corresponding polyesters. The necessary precautions were taken in order to assure good molecular weight control, as well as high yields in the polymerization reactions. The intermediate and final polymers were characterized by gel permeation chromatography and NMR-H¹ spectrometry.     

Ethoxylated nonionic surfactants in hydrophobic solvent: interaction with aqueous and membrane-immobilized poly(acrylic acid)

Interaction between ethoxylated nonionic surfactants and poly(acrylic acid) (PAA) in aqueous solutions is well-documented in the literature. In the present study, pure ethoxylated surfactant solution in a hydrophobic solvent was permeated through a partially cross-linked PAA composite membrane to quantify the surfactant-PAA interaction in the heterogeneous system. Partitioning of the mixture of the surfactants (15-S-5) between the hydrophobic solvent and aqueous solution of PAA was also studied. The role of ethylene oxide group variation in the surfactant-PAA interaction for the heterogeneous system was established by performing experiments with pure surfactants having the same alkyl chain length but varying ethoxylate chain lengths. It was observed that the surfactants with a higher number of ethylene oxide groups per molecule exhibit stronger interaction with PAA. The literature data for adsorption of pure ethoxylated surfactants (C12E(n)) on a hydrophobic solid-water interface was correlated and compared with the data obtained in our study. It was calculated that resistance in terms of transfer of surfactant molecules from a hydrophobic solvent domain to PAA domain lowers the extent of PAA-surfactant interaction by an order of magnitude. Only 40% of available carboxyl groups were accessible for interaction with the ethoxylated nonionic surfactants due to diffusion limitations. Finally the pH sensitivity of the PAA-surfactant complex was verified by successful regeneration of the membrane on permeation of slightly alkaline water. The regeneration and reuse of membrane is especially attractive in terms of process development for nonionic surfactant separation from hydrophobic solvents.     

Interaction between pentaethylene glycol n-octyl ether and low-molecular-weight poly(acrylic acid)

The interaction between pentaethylene glycol n-octyl ether (C8E5) and low-molecular-weight poly(acrylic acid) (PAA, M(w)=2000) in aqueous solution has been investigated by various experimental techniques at constant polymer concentration (0.1% w/w) with varying surfactant molality. Spectrofluorimetry, using pyrene as molecular probe, shows (i) the formation of surfactant-polymer aggregates at a surfactant molality (T(1)) lower than the critical micelle concentration (cmc) of C8E5 in water and (ii) the formation of free micelles at a surfactant molality (T(2)) slightly higher than the cmc. Fluorescence quenching measurements indicate that the presence of PAA induces a lowering of the C8E5 aggregation number. Calorimetry confirms spectrofluorimetric evidence; in addition, it shows the presence of weak interactions below T(1) between monomeric surfactant molecules and the polymer chains. Tensiometry shows that, above T(1), only a low fraction of surfactant molecules interact with the polymer and that free micelle formation occurs before polymer saturation. The peculiarities of the interaction between surfactants and low-molecular-weight polymers have been discussed.     

Calorimetric investigation of poly(methacrylic acid) and poly(acrylic acid) in aqueous solution

The enthalpy of dissociation of poly(acrylic acid) and of poly(methacrylic acid) in water and in 0.5N NaCl at 25°C has been measured over a wide range of degrees of neutralization of the polyelectrolytes. In the case of poly(methacrylic acid) the calorimetric data permit the direct evaluation of the enthalpy of conformational transition of the polymer. For this transition, with the aid of standard free energy data derived from potentiometric titrations, the change in entropy was also estimated. The relative accuracy of the thermodynamic data, and the possibility of deriving therefrom information on the mechanism of transitions of the type, globular coils → expanded coils for partially hydrophobic synthetic polyelectrolytes in aqueous solution are discussed.     

Interaction between poly(N-vinylpyrrolidone) and poly(acrylic acid)s: Influence of hydrogen and cupric ions on the adduct formation

Interpolymer adduct formation between poly(N-vinylpyrrolidone) (PVP) and poly(methacrylic acid) (PMAA) is mainly due to hydrogen bonding. It is found that the interpolymer adduct formation is enhanced in the presence of Cu(II). A simple turbidity measurement making use of a spectrophotofluorometer is described for the study of the interpolymer adduct formation. Enhanced adduct formation in the presence of Cu(II) is described by the empirical relation d[PAd]/D[PVP] = k × 10^4α[Cu(II)]^α, where PAd represents the interpolymer adduct and α and k are constants. Similar results have been obtained in the case of interpolymer adduct formation between poly(acrylic acid) (PAA) and PVP. In the above expression α signifies the influence of chelation on Cu(II)–PAA/PMAA–PVP-type complex formation and k is the extent of PVP–PAA/PMAA interaction. The enhancement of adduct formation in the presence of Cu(II) is more in PAA than in PMAA. Turbidity and viscosity measurements further indicate that the influence of Cu(II) on interpolymer adduct formation between PVP and PMAA or PAA is more in the case of PAA than PMAA, as PAA is a better chelating ligand. But the extent of adduct formation is more in the case of PMAA in the absence of Cu(II) ions due to hydrophobic interactions exerted by methyl groups.     

Effect of urea on poly(methacrylic acid) and poly(acrylic acid) aqueous solutions

The effects of urea on aqueous solutions of both poly(methacrylic acid (PMA) and poly(acrylic acid) (PAA) have been investigated by using potentiometry, viscometry and study of the fluorescence of Auramine O, a cationic dye. The viscosity behaviour of unionized PMA obtained from direct dissolution of solid powder shows that the unneutralized macromolecules can be associated in water. The stability of such “aggregates” seems weak as indicated by their disappearance as soon as the charge density is very low. For PMA salt solution percolated through a cation (H⁺) exchange resin column, no association is observed. The pH-dependent conformational behaviour of PMA which, contrary to PAA, presents compact conformations in water at low charge density is discussed in terms of solvophobic/solvophilic interactions. It is shown that, even for urea concentration up to 8 M, the compact conformations of PMA are not completely destroyed. The formation of H⁺/urea complex is taken into account.     

Synthesis and characterization of Poly(N-isopropylacrylamide)/Poly(acrylic acid) semi-IPN nanocomposite microgels

A novel pH- and temperature-sensitive nanocomposite microgel based on linear Poly(acrylic acid) (PAAc) and Poly(N-isopropylacrylamide) (PNIPA) crosslinked by inorganic clay was synthesized by a two-step method. First, PNIPA microgel was prepared via surfactant-free emulsion polymerization by using inorganic clay as a crosslinker, and then AAc monomer was polymerized within the PNIPA microgel. The structure and morphology of the microgel were confirmed by FTIR, WXRD and TEM. The results indicated that the exfoliated clay platelets were dispersed homogeneously in the PNIPA microgels and acted as a multifunctional crosslinker, while the linear PAAc polymer chains incorporated in the PNIPA microgel network to form a semi-interpenetrating polymer network (semi-IPN) structure. The hydrodynamic diameters of the semi-IPN microgels ranged from 360 to 400 nm, which was much smaller than that of the conventional microgel prepared by using N,N′-methylenebis(acrylamide) (MBA) as a chemical crosslinker, the later was about 740 nm. The semi-IPN microgels exhibited good pH- and temperature-sensitivity, which could respond independently to both pH and temperature changes.     

Synthesis of dense poly(acrylic acid) brushes and their interaction with amine-functional silsesquioxane nanoparticles

Poly(acrylic acid) polyelectrolyte brushes were synthesized by surface-initiated atom transfer radical polymerization (SI-ATRP) of tert-butyl acrylate on planar gold surfaces and subsequent hydrolysis. Three types of monolayers with different numbers of thiol binding sites per initiating unit were used. The binding strength to the gold surface turned out to be of crucial importance for the formation of uniform brush layers after acidic hydrolysis. The monolayers and polymer brushes were characterized by ellipsometry, infrared spectroscopy, water contact angle measurements, atomic force microscopy, and X-ray photoelectron spectroscopy. Their interaction with [(diglycidylamino)propyl]silsesquioxane nanoparticles at various pH values was studied by surface plasmon resonance.     

Doxorubicin-poly(acrylic acid) complexes: interaction with liposomes

Complexation of antitumor drug, doxorubicin (DOX), with poly(acrylic acid) (PAA) in buffer solutions was examined. The DOX-to-PAA binding was governed by electrostatic and stacking interactions resulting in a complex of characteristic composition with a PAA/DOX = 1.6 molar ratio. Sizes of the complex particles were found to lie in 600-900-nm range. However, the particles were able to interact with small neutral egg yolk lecithin liposomes (80-100 nm in diameter), a ternary DOX/PAA/liposome complex being formed. The observations and conclusions we made may be useful for interpreting biological effects of polymer-based bioactive constructs.     

Water-soluble hydrogen-bonding interpolymer complex formation between poly(ethylene glycol) and poly(acrylic acid) grafted with poly(2-acrylamido-2-methylpropanesulfonic acid)

Comb-type copolymers of poly(acrylic acid) grafted with poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPSA) side chains form with poly(ethylene glycol), at low pH, water-soluble hydrogen-bonding interpolymer complexes. Turbidimetry, viscometry, and dynamic light scattering measurements suggest that compact, negatively charged, colloidal nanoparticles are formed at pH<3.75. The influence of the structure of the graft copolymers and of the ionic strength of the solution on the size of these nanoparticles was investigated. It was found that their hydrodynamic radius decreases by increasing the molecular mass of the PAMPSA side chains of the graft copolymer and increases with increasing the ionic strength of the solution.