Highly selective electrochemical method for the detection of serotonin at carbon fiber microelectrode modified with gold nanoflowers and overoxidized polypyrrole

A gold nanoflowers and overoxidized polypyrrole modified carbon fiber microelectrode (OPPy/Au NFs/CFME) was fabricated using electroless deposition and electrochemical method for highly selective and sensitive detection of 5-HT.     

Highly selective electrochemical method for the detection of serotonin at carbon fiber microelectrode modified with gold nanoflowers and overoxidized polypyrrole

A highly selective and sensitive electrochemical method was developed for the detection of serotonin (5-hydroxytryptamine, 5-HT) at gold nanoflowers (Au NFs) and overoxidized polypyrrole (OPPy) modified carbon fiber microelectrode (CFME). Carbon fiber was firstly modified with gold nanoflowers using electroless deposition method, and then modified with overoxidized polypyrrole using electrochemical polymerization and overoxidization to obtain OPPy/Au NFs/CFME. The obtained OPPy/Au NFs/CFME was characterized by field emission scanning electron microscopy and electrochemical techniques. It was found that the OPPy/Au NFs/CFME showed good sensitivity for the detection of 5-HT in the range of 10 nmol/L − 7.0 μmol/L with detection limit of 2.3 nmol/L, and negligible interferences from ascorbic acid, 5-hydroxyindole acetic acid and uric acid. The OPPy/Au NFs/CFME was successfully applied to the detection of 5-HT in human serum samples with good recovery. The work demonstrates that the electrochemical method, incorporating signal amplification of Au NFs with higher cation selection of OPPy, provides a promising tool for the detection of 5-HT in biological systems     

Controllable synthesis of hierarchical nanostructured hollow core/mesopore shell carbon for electrochemical hydrogen storage

Hierarchical nanostructured hollow core/mesopore shell carbon (HN-HCMSC) represents an innovative concept in electrochemical hydrogen storage. This work deals with physical characteristics and electrochemical hydrogen storage behavior of the HN-HCMSCs, produced by a replica technique using solid core/mesopore shell (SCMS) silica as template. HN-HCMSCs with various core sizes and/or shell thicknesses have been fabricated through the independent control of the core sizes and/or shell thicknesses of the SCMS silica templates. The superb structural characteristics of the HN-HCMSCs including large specific surface area and micropore volume, and particularly well-developed three-dimensionally interconnected hierarchical nanostructure (hollow macroporous core in combination with meso-/microporous shell), provide them with great potential for electrochemical hydrogen storage. A discharge capacity up to 586 mAh/g, corresponding to 2.17 wt % hydrogen uptake, has been demonstrated in 6 M KOH for the HN-HCMSC with a core size of 180 nm and a shell thickness of 40 nm at a discharge rate of 25 mA/g. Furthermore, the HN-HCMSC also possesses excellent cycling capacity retainability and rate capability.     

Comparison of nanostructured silver-modified silver and carbon ultramicroelectrodes for electrochemical detection of nitrate

We report the use of silver (Ag)-modified carbon and Ag ultramicroelectrodes (UMEs) for electrochemical detection of nitrate. We investigated several methods for electrodeposition of Ag; our results show that the addition of a complexation agent (ammonium sulfate) in the Ag deposition solution is necessary for electrodeposition of nanostructured Ag that adheres well to the electrode. The electrodeposited Ag on both types of electrodes has branch-like structures that are well-suited for electrocatalytic reduction of nitrate. The use of UMEs is advantageous; the sigmoidal-shaped cyclic voltammogram allows for sensitive detection of nitrate by reducing the capacitive current, as well as enabling easy quantification of the nitrate reduction current. Both cyclic voltammetry and chronoamperometry were used to characterize the electrodes; and independent of the electrochemical interrogation technique, both UMEs were found to have a wide linear dynamic range (4–1000 μM) and a low limit of detection (3.2–5.1 μM). More importantly, they are reusable up to ∼100 interrogation cycles and are selective enough to be used for direct detection of nitrate in a synthetic aquifer sample without any sample pretreatment and/or pH adjustment.     

Paper-based electrochemical cyto-device for sensitive detection of cancer cells and in situ anticancer drug screening

In this work, using human acute promyelocytic leukemia cells (HL-60) as a model, a novel microfluidic paper-based electrochemical cyto-device (μ-PECD) was fabricated to demonstrate a facile, portable, and disposable approach for cancer cell detection and in situ screening of anticancer drugs in a high-throughput manner. In this μ-PECD, aptamers modified three-dimensional macroporous Au-paper electrode (Au-PE) was fabricated and employed as the working electrode for specific and efficient cancer cell capture as well as for sequential in-electrode 3D cell culture. This Au-PE showed enhanced capture capacity for cancer cells and good biocompatibility for preserving the activity of captured living cells. Sensitive cancer cell detection was achieved in this μ-PECD, which could respond down to four HL-60 cells in 10 μL volume with a wide linear calibration range from 5.0 × 10² to 7.5 × 10⁷ cells mL⁻¹ and exhibited good stability and reproducibility. Then, in situ anticancer drug screening was successfully implemented in this μ-PECD through monitoring of the apoptotic cancer cells after the in-electrode 3D cell culture with drug-containing culture medium, demonstrating its wide range of potential applications to facilitate effective clinical cancer diagnosis and treatment.     

Non-conductive nanomaterial enhanced electrochemical response in stripping voltammetry: The use of nanostructured magnesium silicate hollow spheres for heavy metal ions detection

Nanostructured magnesium silicate hollow spheres, one kind of non-conductive nanomaterials, were used in heavy metal ions (HMIs) detection with enhanced performance for the first time. The detailed study of the enhancing electrochemical response in stripping voltammetry for simultaneous detection of ultratrace Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺ was described. Electrochemical properties of modified electrodes were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The operational parameters which have influence on the deposition and stripping of metal ions, such as supporting electrolytes, pH value, and deposition time were carefully studied. The anodic stripping voltammetric performance toward HMIs was evaluated using square wave anodic stripping voltammetry (SWASV) analysis. The detection limits achieved (0.186 nM, 0.247 nM, 0.169 nM and 0.375 nM for Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺) are much lower than the guideline values in drinking water given by the World Health Organization (WHO). In addition, the interference and stability of the modified electrode were also investigated under the optimized conditions. An interesting phenomenon of mutual interference between different metal ions was observed. Most importantly, the sensitivity of Pb²⁺ increased in the presence of certain concentrations of other metal ions, such as Cd²⁺, Cu²⁺ and Hg²⁺ both individually and simultaneously. The proposed electrochemical sensing method is thus expected to open new opportunities to broaden the use of SWASV in analysis for detecting HMIs in the environment.     

Supported noble metal nanoparticles as photo/sono-catalysts for synthesis of chemicals and degradation of pollutants

This review summarizes the utilization of supported noble metal nanoparticles (such as Au/TiO2, Au/ZrO2, Ag/AgCl) as efficient photo/sono-catalysts for the selective synthesis of chemicals and degradation of environmental pollutants. Supported noble metal nanoparticles could efficiently catalyze the conversion of solar energy into chemical energy. Under UV/visible light irradiation, important chemical transformations such as the oxidation of alcohols to carbonyl compounds, the oxidation of thiol to disulfid...     

Flash light synthesis of noble metal nanoparticles for electrochemical applications: silver,gold, and their alloys

Journal of Solid State Electrochemistry - The synthesis of noble metal nanoparticles (i.e., silver and gold) for electrochemical applications has been widely studied using mainly wet synthesis...     

Chitosan coated carbon fiber microelectrode for selective in vivo detection of neurotransmitters in live zebrafish embryos

We report the development of a chitosan modified carbon fiber microelectrode for in vivo detection of serotonin. We find that chitosan has the ability to reject physiological levels of ascorbic acid interferences and facilitate selective and sensitive detection of in vivo levels of serotonin, a common catecholamine neurotransmitter. Presence of chitosan on the microelectrode surface was investigated using scanning electron microscopy (SEM) and cyclic voltammetry (CV). The electrode was characterized using differential pulse voltammetry (DPV). A detection limit of 1.6 nM serotonin with a sensitivity of 5.12 nA/μM, a linear range from 2 to 100 nM and a reproducibility of 6.5% for n=6 electrodes were obtained. Chitosan modified microelectrodes selectively measure serotonin in presence of physiological levels of ascorbic acid. In vivo measurements were performed to measure concentration of serotonin in the live embryonic zebrafish intestine. The sensor quantifies in vivo intestinal levels of serotonin while successfully rejecting ascorbic acid interferences. We demonstrate that chitosan can be used as an effective coating to reject ascorbic acid interferences at carbon fiber microelectrodes, as an alternative to Nafion, and that chitosan modified microelectrodes are reliable tools for in vivo monitoring of changes in neurotransmitter levels.     

3-Glycidoxypropyltrimethoxysilane mediated in situ synthesis of noble metal nanoparticles: application to hydrogen peroxide sensing

The in situ synthesis is reported of noble metal nanoparticles via 3-glycidoxypropyltrimethoxysilane mediated reduction of 3-aminopropyltrimethoxysilane treated metal salts during sol-gel processing. The method described involves the synthesis of uniform spherical nanoparticles of gold, silver and palladium with controlled size that can be directly utilized for thin film preparation. A detailed study of the synthesis and application of gold nanoparticles to the electrochemical detection of hydrogen peroxide was carried out and reveals that the amplification of hydrogen peroxide sensing is size-dependent. In addition, these nanoparticles exhibit excellent compatibility towards composite preparation. As an example, a nanocomposite with Prussian Blue (PB) is synthesized and found to be useful for the fabrication of chemically modified electrodes (CME). The resulting CME shows dramatic improvement in the electrochemistry of PB with gradual enhancement in electrocatalytic efficiency towards hydrogen peroxide sensing. The nanocomposite is used to study the direct and horseradish peroxidase (HRP)-catalyzed reduction of hydrogen peroxide. The results recorded for hydrogen peroxide analysis show an improvement in sensitivity and limit of detection on decreasing the size of gold nanoparticles in all cases.     

基于氧化锌/碳纳米纤维材料的氧氟沙星电化学传感器的构建及应用

通过静电纺丝技术合成碳纳米纤维,以循环伏安法在此碳纤维上电聚合乙酸锌制备复合纳米材料作为一种新型的电化学增敏剂,用于修饰玻碳电极,开发了一种基于碳纤维和氧化锌复合材料的新型电化学传感器(ZnO/CNF/GCE)。使用循环伏安法、差分脉冲伏安法等进行电化学催化性能的研究,并优化实验条件。结果表明,与裸电极相比,在pH 5.5磷酸盐缓冲溶液中,ZnO/CNF/GCE修饰电极能使氧氟沙星的峰电流明显提升,线性范围1~200μmol/L,检测限为0.33μmol/L。该ZnO/CNF/GCE修饰电极已用于氧氟沙星滴耳液中氧氟沙星的含量测定。     

Direct electrochemistry of hemoglobin and myoglobin at didodecyldimethylammonium bromide-modified powder microelectrode and application for electrochemical detection of nitric oxide

Hemoglobin (Hb) and myoglobin (Mb) were immobilized at the didodecyldimethylammonium bromide (DDAB)-modified powder microelectrode (PME) to fabricate Hb-DDAB-PME and Mb-DDAB-PME. Direct electrochemistry of Hb and Mb were achieved on the DDAB-modified PME. The formal potential was −0.224 V for Hb and −0.212 V for Mb (vs. SCE). The apparent surface concentration of Hb and Mb at the electrode surface was 2.83 × 10⁻⁸ and 9.94 × 10⁻⁸ mol cm⁻². The Hb-DDAB-PME and Mb-DDAB-PME were successfully applied for measurement of NO in vitro. The anodic current peaks for NO oxidation at +0.7 V and the cathodic current peaks for NO reduction at −0.85 V on the CV curves were obtained on the modified electrodes. For detection of NO at +0.7 V, the sensitivity is 3.31 mA μM⁻¹ cm⁻² for Hb-DDAB-PME and 0.6 mA μM⁻¹ cm⁻² for Mb-DDAB-PME. The detection limit is 5 nM for Hb-DDAB-PME and 9 nM for Mb-DDAB-PME. The linear response range is 9-100 and 28-330 nM for Hb- and Mb-modified PME, respectively. For the electrochemical detection of NO at −0.85 V by using Hb-DDAB-PME, the detection sensitivity is 39.56 μA μM⁻¹ cm⁻²; the detection limit is as low as 0.2 μM; and the linear response range is 1.90-28.08 μM.     

A label-free cytosensor for the enhanced electrochemical detection of cancer cells using polydopamine-coated carbon nanotubes

An electrochemical, label-free method was developed to detect folate receptor positive tumor cells by specific recognition of a polydopamine-coated carbon nanotubes-folate nanoprobe to cell-surface folate receptors. This strategy offers great promise to extend its application in studying the interaction of ligand and cell-surface receptor.     

Functional mesoporous carbon nanotubes and their integration in situ with metal nanocrystals for enhanced electrochemical performances

Functional mesoporous carbon nanotubes (MCNTs) and their integration in situ with Pt nanocrystals (Pt/MCNTs) have been designed and successfully developed via a facile route, which exhibited enhanced performances in energy storage and conversion applications.     

Direct synthesis of noble metal/graphene nanocomposites from graphite in water: photo-synthesis

We report on the direct and facile method for noble metal/graphene nano-composites from graphite without reducing agents. In this system, the irradiant white-light instead of the chemical reducing agent exerts the influence on the synthesis of noble metal nanoparticles on graphene. Noble metal salts adsorbed on graphene flakes which were functionalized with ionic surfactants were reduced by irradiation with white light. In particular, noble metal nanoparticles were more evenly distributed on the surface of graphene which was functionalized with SDS than with CTAB.     

Hierarchical micro/nano structures of carbon composites as anodes for microbial fuel cells

We demonstrate the utility of hierarchical micro/nano structures of electrically conductive carbon composites as anodes for microbial fuel cells (MFCs). To construct the hierarchical structures, carbon nanotubes (CNTs) were directly grown on micro-porous graphite felts at high densities. Using the CNT-modified felts as anodes, power outputs from MFCs were increased ～7 fold compared to those with bare graphite-felt anodes. We also show that this power improvement is sustainable even in MFCs operated with naturally occurring microbial communities. These results suggest the wide utility of the hierarchical micro/nano structures of conductive carbon composites for bio-electrochemical processes.