Water-oil core-shell droplets for electrowetting-based digital microfluidic devices

Digital microfluidics based on electrowetting-on-dielectric (EWOD) has recently emerged as one of the most promising technologies to realize integrated and highly flexible lab-on-a-chip systems. In such EWOD-based digital microfluidic devices, the aqueous droplets have traditionally been manipulated either directly in air or in an immiscible fluid such as silicone oil. However, both transporting mediums have important limitations and neither offers the flexibility required to fulfil the needs of several applications. In this paper, we report on an alternative mode of operation for EWOD-based devices in which droplets enclosed in a thin layer of oil are manipulated in air. We demonstrate the possibility to perform on-chip the fundamental fluidic operations by using such water-oil core-shell droplets and compare systematically the results with the traditional approach where the aqueous droplets are manipulated directly in air or oil. We show that the core-shell configuration combines several advantages of both the air and oil mediums. In particular, this configuration not only reduces the operation voltage of EWOD-based devices but also leads to higher transport velocities when compared with the manipulation of droplets directly in air or oil.     

Capacitance-based droplet position estimator for digital microfluidic devices

Digital microfluidic (DMF) devices manipulate minuscule droplets through basic fluidic operations including droplet transport, mixing and splitting commonly known as the building blocks for complete laboratory analyses on a single device. A DMF device can house various chemical species and confine chemical reactions within the volume of a droplet much like a micro-reactor. The automation of fluidic protocols requires a feedback controller whose sensor is capable of locating droplets independent of liquid composition (or previous knowledge of liquid composition). In this research, we present an estimator that tracks the continuous displacement of a droplet between electrodes of a DMF device. The estimator uses a dimensionless ratio of two electrode capacitances to approximate the position of a droplet, even, in the domain between two adjacent electrodes. This droplet position estimator significantly enhances the control precision of liquid handling in DMF devices compared to that of the techniques reported in the literature. It captures the continuous displacement of a droplet; valuable information for a feedback controller to execute intricate fluidic protocols including droplet positioning between electrodes, droplet velocity and acceleration control. We propose a state estimator for tracking the continuous droplet displacement between two adjacent electrodes. The dimensionless nature of this estimator means that any droplet composition can be sensed. Thus, no calibration for each chemical species within a single DMF device is required. We present theoretical and experimental results that demonstrate the efficacy of the position estimator in approximating the position of the droplet in the interval between two electrodes.     

Thermoplastic microfluidic devices and their applications in protein and DNA analysis

Microfluidics is a platform technology that has been used for genomics, proteomics, chemical synthesis, environment monitoring, cellular studies, and other applications. The fabrication materials of microfluidic devices have traditionally included silicon and glass, but plastics have gained increasing attention in the past few years. We focus this review on thermoplastic microfluidic devices and their applications in protein and DNA analysis. We outline the device design and fabrication methods, followed by discussion on the strategies of surface treatment. We then concentrate on several significant advancements in applying thermoplastic microfluidic devices to protein separation, immunoassays, and DNA analysis. Comparison among numerous efforts, as well as the discussion on the challenges and innovation associated with detection, is presented.     

In-channel atom-transfer radical polymerization of thermoset polyester microfluidic devices for bioanalytical applications

A new technique for polymer microchannel surface modification, called in-channel atom-transfer radical polymerization, has been developed and applied in the surface derivatization of thermoset polyester (TPE) microdevices with poly(ethylene glycol) (PEG). X-ray photoelectron spectroscopy, electroosmotic flow (EOF), and contact angle measurements indicate that PEG has been grafted on the TPE surface. Moreover, PEG-modified microchannels have much lower and more pH-stable EOF, more hydrophilic surfaces and reduced nonspecific protein adsorption. Capillary electrophoresis separation of amino acid and peptide mixtures in these PEG-modified TPE microchips had good reproducibility. Phosducin-like protein and phosphorylated phosducin-like protein were also separated to measure the phosphorylation efficiency. Our results indicate that PEG-grafted TPE microchips have broad potential application in biomolecular analysis.     

Surface modification of polymer microfluidic devices using in-channel atom transfer radical polymerization

In-channel atom transfer radical polymerization (ATRP) was used to graft a PEG layer on the surface of microchannels formed in poly(glycidyl methacrylate)-co-(methyl methacrylate) (PGMAMMA) microfluidic devices. The patterned and cover plates were first anchored with ATRP initiator and then thermally bonded together, followed by pumping a solution containing monomer, catalyst, and ligand into the channel to perform ATRP. A PEG-functionalized layer was grafted on the microchannel wall, which resists protein adsorption. X-ray photoelectron spectroscopy (XPS) was used to investigate the initiator-bound surface, and EOF was measured to evaluate the PEG-grafted PGMAMMA microchannel. Fast, efficient, and reproducible separations of amino acids, peptides, and proteins were obtained using the resultant microdevices. Separation efficiencies were higher than 1.0x10(4) plates for a 3.5 cm separation microchannel. Compared with microdevices modified using a previously reported ATRP technique, these in-channel modified microdevices demonstrated better long-term stability.     

DNA sequencing and multiplex STR analysis on plastic microfluidic devices

The ability of plastic microfluidic devices with separation channel lengths of 6, 10 or 18 cm to perform high-quality and high-performance ssDNA analysis was evaluated. Specifically, four-color DNA sequencing separation of a terminator sequencing standard using replaceable, urea-denaturing linear polyacrylamide (LPA) solution as a sieving matrix, yielded read lengths of 410 bases in 15 min with base calling accuracy of 99.2% on a 6-cm device, and 640 bases in 35 min with accuracy of 98.0% on a 18-cm device. A two-color sizing analysis of four-locus (CSF1PO, TPOX, TH01, vWA) short tandem repeats (STRs) allelic ladder on a 10-cm device indicated a mean SD of +/- 0.08 base pairs (bp) between runs, and single bp resolution of spiked TH01 allele 9.3 (198 bp) from TH01 allele 10 (199 bp) of the CTTv ladder with R = 0.81. A four-color multiplex sizing analysis of three different AmpFlSTR allelic ladders consisting of nine loci (D3S1358, vWA, FGA, D8S1179, D21S11, D18S51, D5S818, D13S317, D7S820) and gender alleles (Amelogenin) on a 10-cm device had a mean SD of +/- 0.15 bp between runs for sizing three loci, i.e., FGA, D18S51 and D3S818; alleles differing by 2 bp in size were resolved with resolutions close to baseline. This work demonstrates that plastic microfluidic devices are capable of quality sequencing and STR sizing comparable to that of glass devices of similar separation lengths.     

Bioanalysis in microfluidic devices

Microfabricated bioanalytical devices (also referred to as laboratory-on-a-chip or micro-TAS) offer highly efficient platforms for simultaneous analysis of a large number of biologically important molecules, possessing great potential for genome, proteome and metabolome studies. Development and implementation of microfluidic-based bioanalytical tools involves both established and evolving technologies, including microlithography, micromachining, micro-electromechanical systems technology and nanotechnology. This article provides an overview of the latest developments in the key device subject areas and the basic interdisciplinary technologies. Important aspects of DNA and protein analysis, interfacing issues and system integration are all thoroughly discussed, along with applications for this novel "synergized" technology in high-throughput separations of biologically important molecules. This review also gives a better understanding of how to utilize these technologies as well as to provide appropriate technical solutions to problems perceived as being more fundamental.     

Preconcentration and separation of double-stranded DNA fragments by electrophoresis in plastic microfluidic devices

We have evaluated double-stranded DNA separations in microfluidic devices which were designed to couple a sample preconcentration step based on isotachophoresis (ITP) with a zone electrophoretic (ZE) separation step as a method to increase the concentration limit of detection in microfluidic devices. Developed at ACLARA BioSciences, these LabCard trade mark devices are plastic 32 channel chips, designed with a long sample injection channel segment to increase the sample loading. These chips were designed to allow stacking of the sample into a narrow band using discontinuous ITP buffers, and subsequent separation in the ZE mode in sieving polymer solutions. Compared to chip ZE, the sensitivity was increased by 40-fold and we showed baseline resolution of all fragments in the PhiX174/HaeIII DNA digest. The total analysis time was 3 min/sample, or less than 100 min per LabCard device. The resolution for multiplexed PCR samples was the same as obtained in chip ZE. The limit of detection was 9 fg/microL of DNA in 0.1xpolymerase chain reaction (PCR) buffers using confocal fluorescence detection following 488 nm laser excitation with thiazole orange as the fluorescent intercalating dye.     

Integration of large-area polymer nanopillar arrays into microfluidic devices using in situ polymerization cast molding

Presented here is a simple and robust approach for the integration of mixed-scale (nm-cm) structures into fluidic devices. We report on devices composed of large-area polymer nanopillar arrays of high aspect ratio (33-667) integrated into microfluidic channels fabricated by cast-molding polymerization of methyl methacrylate with mechanically/lithographically patterned, nanoporous aluminium oxide (AAO) templates. The microchannels containing the nanopillar arrays can be chemically functionalized and used for a variety of applications, such as separation beds or solid-phase reactors/extractors.     

Surface-imprinted polymers in microfluidic devices

Molecularly imprinted polymers are generated by curing a cross-linked polymer in the presence of a template. During the curing process, noncovalent bonds form between the polymer and the template. The interaction sites for the noncovalent bonds become "frozen" in the cross-linking polymer and maintain their shape even after the template is removed. The resulting cavities reproduce the size and shape of the template and can selectively reincorporate the template when a mixture containing it flows over the imprinted surface. In the last few decades the field of molecular imprinting has evolved from being able to selectively capture only small molecules to dealing with all kinds of samples. Molecularly imprinted polymers (MIPs) have been generated for analytes as diverse as metal ions, drug molecules, environmental pollutants, proteins and viruses to entire cells. We review here the relatively new field of surface imprinting, which creates imprints of large, biologically relevant templates. The traditional bulk imprinting, where a template is simply added to a prepolymer before curing, cannot be applied if the analyte is too large to diffuse from the cured polymer. Special methods must be used to generate binding sites only on a surface. Those techniques have solved crucial problems in separation science as well as chemical and biochemical sensing. The implementation of imprinted polymers into microfluidic chips has greatly improved the applicability of microfluidics. We present the latest advances and different approaches of surface imprinting and their applications for microfluidic devices.     

Urine analysis in microfluidic devices

Microfluidics has attracted considerable attention since its early development in the 1980s and has experienced rapid growth in the past three decades due to advantages associated with miniaturization, integration and automation. Urine analysis is a common, fast and inexpensive clinical diagnostic tool in health care. In this article, we will be reviewing recent works starting from 2005 to the present for urine analysis using microfluidic devices or systems and to provide in-depth commentary about these techniques. Moreover, commercial strips that are often treated as chips and their readers for urine analysis will also be briefly discussed. We start with an introduction to the physiological significance of various components or measurement standards in urine analysis, followed by a brief introduction to enabling microfluidic technologies. Then, microfluidic devices or systems for sample pretreatments and for sensing urinary macromolecules, micromolecules, as well as multiplexed analysis are reviewed, in this sequence. Moreover, a microfluidic chip for urinary proteome profiling is also discussed, followed by a section discussing commercial products. Finally, the authors' perspectives on microfluidic-based urine analysis are provided. These advancements in microfluidic techniques for urine analysis may improve current routine clinical practices, particularly for point-of-care (POC) applications.     

表面印迹聚合物及其在微流控器件中的应用

分子印迹聚合物是通过在模板存在下固化交联的聚合物制备的.在固化过程中,聚合物和模板间形成非共价键.这些非共价结合位点被"冻结"在交联的聚合物中,即使移去模板后也依然维持他们的形状.余下的空穴与模板的尺寸和形状一致,并且可以选择性地从流过的混合物中俘获模板物质.在近几十年中,分子印迹的领域由选择性俘获小分子扩展到处理各种类型的样品.分子印迹聚合物(MIP)被用于分析种类繁多的样品,比如金属离子、药物分子、环境污染物、蛋白、病毒以至整个细胞.本文中我们综述相对较新的领域——表面印迹,这是一种可以用来生成相对较大的生物相关模板的印迹方法.传统的整体印迹法是直接在固化前将模板加入预聚体中,因而不适用于那些大到无法从固化后的聚合物中扩散出来的物质.要仅在表面上生成结合位点,必须要使用特别的方法,由此产生的表面印迹技术解决了分离科学以及化学和生物化学监测的重要问题.将印迹聚合物植入微流控芯片,大大扩展了微流体技术的适用性.本文叙述表面印迹最新的进展以及不同的实施手段,以及它们在微流控器件中的应用.     

Nonlithographic fabrication of microfluidic devices

A facile nonlithographic method for expedient fabrication of microfluidic devices of poly(dimethylsiloxane) is described. Positive-relief masters for the molds are directly printed on smooth substrates. For the formation of connecting channels and chambers inside the polymer components of the microfluidic devices, cavity-forming elements are adhered to the surfaces of the masters. Using this nonlithographic approach, we fabricated microfluidic devices for detection of bacterial spores on the basis of enhancement of the emission of terbium (III) ions.     

Characterizing electroosmotic flow in microfluidic devices

The current-monitoring method was used to measure the electroosmotic flow (EOF) in borosilicate glass capillaries and zeonor plastic microfluidic devices. The surface of the zeonor devices must be oxidized to support EOF and this treatment shows signs of aging within 6 days. Oxidized zeonor devices showed the same response to changes in applied field, pH, and ionic concentration as the capillaries. The effects of several common dynamic surfactant coatings on the walls were also studied (0.1%, v/v solutions of POP-6, POP4, Pluronics L81, and NP-40). These generally significantly suppressed the EOF but required several days to stabilize.     

Diffusion coefficient measurements in microfluidic devices

A glassy carbon electrode (GCE) modified with Pd/IrO(2) provides excellent electrocatalytic oxidation of hydrogen peroxide. Glucose oxidase (GOD) and xanthine oxidase (XOD) were co-immobilized on the modified electrode with a thin film Nafion coated on the enzyme layer to form a glucose (Glu)/hypoxanthine (Hx) sensor, without interference from electroactive species such as ascorbic acid (AA) and uric acid (UA). Its response was evaluated with respect to the enzyme amount on the electrode, pH and temperature of the electrolyte. The prepared bienzymic biosensor, used as the detector of HPLC gave a detection limit of 1.0x10(-6) mol l(-1) Glu and 2.0x10(-7) mol l(-1) Hx (Hx) with a linear concentration range of 5.0x10(-6)-2.5x10(-3) mol l(-1) and 1.0x10(-6)-5.0x10(-4) mol l(-1), respectively. Coupled with microdialysis, it was used to monitor the concentrations of Glu and Hx in rat brain.     

Continuous flow separations in microfluidic devices

Biochemical sample mixtures are commonly separated in batch processes, such as filtration, centrifugation, chromatography or electrophoresis. In recent years, however, many research groups have demonstrated continuous flow separation methods in microfluidic devices. Such separation methods are characterised by continuous injection, real-time monitoring, as well as continuous collection, which makes them ideal for combination with upstream and downstream applications. Importantly, in continuous flow separation the sample components are deflected from the main direction of flow, either by means of a force field (electric, magnetic, acoustic, optical etc.), or by intelligent positioning of obstacles in combination with laminar flow profiles. Sample components susceptible to deflection can be spatially separated. A large variety of methods has been reported, some of these are miniaturised versions of larger scale methods, others are only possible in microfluidic regimes. Researchers now have a diverse toolbox to choose from and it is likely that continuous flow methods will play an important role in future point-of-care or in-the-field analysis devices.     

Partition-induced vector chromatography in microfluidic devices

We investigate by means of macrotransport theory the transport of Brownian particles in a slit geometry in the presence of an arbitrary two-dimensional periodic energy landscape and driven by an external force or convected by a flow field. We obtained analytical expressions for the probability distribution and the average migration angle of the particles under the Fick-Jacobs approximation. The migration angle is shown to differ from the angle of the driving field and to strongly depend on the physical properties of the suspended species, thus providing the basis for vector chromatography, in which different species move in different directions and can be continuously fractionated. The potential of microfluidic devices as a platform for partition-induced vector chromatography is demonstrated by considering the particular case of a piece-wise constant, periodic potential that, in equilibrium, induces the spontaneous partition of different species into high and low concentration stripes, and which can be easily fabricated by patterning physically or chemically one of the surfaces of a channel. We show the feasibility to fractionate a mixture of particles for systems in which partition is induced via 1-g gravity and Van der Waals interactions in physically or chemically patterned channels.     

Surface-induced droplet fusion in microfluidic devices

Here we demonstrate a new method for droplet fusion based on a surface energy pattern on the walls of a microfluidic device, that does not require active elements nor accurate synchronization of the droplets.     

Power-free poly(dimethylsiloxane) microfluidic devices for gold nanoparticle-based DNA analysis

An extremely simple, power-free pumping method for poly(dimethylsiloxane)(PDMS) microfluidic devices is presented. By exploiting the high gas solubility of PDMS, the energy for the pumping is pre-stored in the degassed bulk PDMS, therefore no additional structures other than channels and reservoirs are required. In a Y-shaped microchannel with cross section of 100 microm width x 25 microm height, this method has provided flow rate of 0.5-2 nL s(-1), corresponding to linear velocity of 0.2-0.8 mm s(-1), with good reproducibility. As an application of the power-free pumping, gold nanoparticle-based DNA analysis, which does not rely on the cross-linking mechanism between nanoparticles, has been implemented in a microchannel with three inlets. Target 15mer DNA has been easily and unambiguously discriminated from its single-base substituted mutant. Instead of colorimetric detection in a conventional microtube, an alternative detection technique suitable for microdevices has been discovered-observation of deposition on the PDMS surfaces. The channel layout enabled two simultaneous DNA analyses at the two interfaces between the three laminar streams.