Palladium-catalyzed fluorination of carbon-hydrogen bonds

This communication describes the development of a new Pd-catalyzed method for the fluorination of carbon-hydrogen bonds. A key step of these transformations involves palladium-mediated carbon-fluorine coupling-a much sought after, but previously unprecedented, transformation. These reactions were successfully achieved under oxidative conditions using electrophilic N-fluoropyridinium reagents. Microwave irradiation in the presence of catalytic palladium acetate served as optimal conditions for the fluorination of C-H bonds in a variety of substituted 2-arylpyridine and 8-methylquinoline derivatives.     

Electroytic partial fluorination of organic compounds. 52. Regio- and diastereoselective anodic fluorination of thiazolidines

Anodic fluorination of N-benzoyl, N-acethyl-, and N-formylthiazolidine derived from L-cysteine was carried out in dimethoxyethane (DME) and acetonitrile containing various supporting fluoride salts using an undivided cell. Highly regioselective fluorination proceeded to provide the corresponding 5-monofluorinated thiazolidine derivatives in good yields in DME, and the diastereoselectivitiy was moderate to high regardless of the supporting fluoride salts. The diastereoselectivitiy of the fluorination was greatly affected by the bulkyness of the subsitituent on the nitrogen atom, and N-benzoylthiazolidine gave much higher diastereoselectivity compared with N-formyl derivative. The fluorination of the thiazolidines was not achieved by commercially available fluorinating reagents such as N-fluoropyridinium salts.     

C-F Bond Formation for the Synthesis of Aryl Fluorides

A selection of carbon-fluorine bond-forming reactions is presented with particular focus on transition metal-mediated fluorination. A brief summary of conventional fluorination reactions is followed by a discussion of fluorination reactions mediated by palladium and silver. Investigations into the mechanism as well as the conceptual difficulty associated with transition metal-mediated carbon-fluorine bond formation are presented.     

Kinetics of Electrophilic Fluorination of Steroids and Epimerisation of Fluorosteroids

Fluorinated steroids, which are synthesised by electrophilic fluorination, form a significant proportion of marketed pharmaceuticals. To gain quantitative information on fluorination at the 6-position of steroids, kinetics studies were conducted on enol ester derivatives of progesterone, testosterone, cholestenone and hydrocortisone with a series of electrophilic N−F reagents. The stereoselectivities of fluorination reactions of progesterone enol acetate and the kinetic effects of additives, including methanol and water, were investigated. The kinetics of epimerisation of 6β-fluoroprogesterone to the more pharmacologically active 6α-fluoroprogesterone isomer in HCl/acetic acid solutions are detailed.     

Introduction of Fluorine and Fluorine‐Containing Functional Groups

Over the past decade, the most significant, conceptual advances in the field of fluorination were enabled most prominently by organo‐ and transition‐metal catalysis. The most challenging transformation remains the formation of the parent C? F bond, primarily as a consequence of the high hydration energy of fluoride, strong metal—fluorine bonds, and highly polarized bonds to fluorine. Most fluorination reactions still lack generality, predictability, and cost‐efficiency. Despite all current limitations, modern fluorination methods have made fluorinated molecules more readily available than ever before and have begun to have an impact on research areas that do not require large amounts of material, such as drug discovery and positron emission tomography. This Review gives a brief summary of conventional fluorination reactions, including those reactions that introduce fluorinated functional groups, and focuses on modern developments in the field.     

离子液体在不对称催化反应中的应用进展

综述了近年来离子液体在不对称催化反应中的应用,包括不对称Aldol反应、不对称氟化反应、酶催化的不对称还原反应、不对称催化氢化反应、不对称硅腈化反应、不对称环丙烷化反应、烯丙基的不对称取代反应、环氧化物的不对称开环反应、不对称环氧化反应、烯烃的不对称双羟基化反应、酶催化的醇的动力学拆分。参考文献43篇。     

A Convenient Photocatalytic Fluorination of Unactivated CH Bonds

Fluorination reactions are essential to modern medicinal chemistry, thus providing a means to block site‐selective metabolic degradation of drugs and access radiotracers for positron emission tomography imaging. Despite current sophistication in fluorination reagents and processes, the fluorination of unactivated C? H bonds remains a significant challenge. Reported herein is a convenient and economic process for direct fluorination of unactivated C? H bonds that exploits the hydrogen abstracting ability of a decatungstate photocatalyst in combination with the mild fluorine atom transfer reagent N‐fluorobenzenesulfonimide. This operationally straightforward reaction provides direct access to a wide range of fluorinated organic molecules, including structurally complex natural products, acyl fluorides, and fluorinated amino acid derivatives.     

A Convenient Photocatalytic Fluorination of Unactivated C?H Bonds

Fluorination reactions are essential to modern medicinal chemistry, thus providing a means to block site‐selective metabolic degradation of drugs and access radiotracers for positron emission tomography imaging. Despite current sophistication in fluorination reagents and processes, the fluorination of unactivated C H bonds remains a significant challenge. Reported herein is a convenient and economic process for direct fluorination of unactivated C H bonds that exploits the hydrogen abstracting ability of a decatungstate photocatalyst in combination with the mild fluorine atom transfer reagent N‐fluorobenzenesulfonimide. This operationally straightforward reaction provides direct access to a wide range of fluorinated organic molecules, including structurally complex natural products, acyl fluorides, and fluorinated amino acid derivatives.     

Stereospecific Electrophilic Fluorination of Alkylcarbastannatrane Reagents

We report the use of isolable primary and secondary alkylcarbastannatrane nucleophiles in site‐specific fluorination reactions. These reactions occur without the need for transition metal catalysis or in situ activation of the nucleophile. In the absence of the carbastannatrane backbone, alkyltin nucleophiles exhibit no activity towards fluorination. When enantioenriched alkylcarbastannatranes are employed, fluorination occurs predominately via a stereoinvertive mechanism to generate highly enantioenriched alkyl fluoride compounds. These conditions can also be extended to stereospecific chlorination, bromination, and iodination reactions.     

Stable dialkyl ether/poly(hydrogen fluoride) complexes: dimethyl ether/poly(hydrogen fluoride), a new,convenient, and effective fluorinating agent

The preparation, (1)H, (13)C, and (19)F NMR structural characterization as well as with DFT-based theoretical calculations of stable dialkyl ether/poly(hydrogen fluoride) complexes are reported. Dimethyl ether/poly(hydrogen fluoride) (DMEPHF), are stable complexes of particular interest and use. The DFT calculations, that are in agreement with NMR data, suggest a cyclic poly(hydrogen fluoride) bridged structure for DMEPHF. The complex, DME-5 HF was found to be a convenient and effective new fluorinating agent with the ease of workup and applied to several fluorination reactions, such as the hydrofluorination and bromofluorination of alkenes, and fluorination of alcohols giving good to excellent yield with high selectivity. Homologous dialkyl ether/poly(hydrogen fluoride) (R(2)O/[HF](n,), R = Et, nPr) systems are also stable and suitable for fluorination reactions.     

Enantio‐ and Site‐Selective α‐Fluorination of N‐Acyl 3,5‐Dimethylpyrazoles Catalyzed by Chiral π–CuII Complexes

Catalytic enantioselective α‐fluorination reactions of carbonyl compounds are among the most powerful and efficient synthetic methods for constructing optically active α‐fluorinated carbonyl compounds. Nevertheless, α‐fluorination of α‐nonbranched carboxylic acid derivatives is still a big challenge because of relatively high pK_a values of their α‐hydrogen atoms and difficulty of subsequent synthetic transformation without epimerization. Herein we show that chiral copper(II) complexes of 3‐(2‐naphthyl)‐l ‐alanine‐derived amides are highly effective catalysts for the enantio‐ and site‐selective α‐fluorination of N‐(α‐arylacetyl) and N‐(α‐alkylacetyl) 3,5‐dimethylpyrazoles. The substrate scope of the transformation is very broad (25 examples including a quaternary α‐fluorinated α‐amino acid derivative). α‐Fluorinated products were converted into the corresponding esters, secondary amides, tertiary amides, ketones, and alcohols with almost no epimerization in high yield.     

Transition metal-catalyzed fluorination of multi carbon-carbon bonds: new strategies for fluorinated heterocycles

Transition metal catalysts have been developed for introducing fluorine into organic compounds. Recent progress in this area is reviewed with an emphasis on the selective fluorination of alkenes, alkynes and allenes. Regio- and stereoselective fluorination reactions are highlighted.     

Selective Radical Fluorination of Tertiary Alkyl Halides at Room Temperature

Direct fluorination of tertiary alkyl bromides and iodides with Selectfluor is described. The halogen‐exchange fluorination proceeds efficiently in acetonitrile at room temperature under metal‐free conditions and exhibits a wide range of functional group compatibility. Furthermore, the reactions are highly selective in that alkyl chlorides and primary and secondary alkyl bromides remain intact. A radical mechanism is proposed for this selective fluorination.     

高价碘试剂介导的8-氨基喹啉C(5)位碳-氢键亲核氟化反应

8-氨基喹啉的C(5)位碳-氢键氟化反应近年来受到广泛关注,但大多需要使用过渡金属催化剂和亲电氟化试剂来实现.在高价碘试剂的介导下实现了无过渡金属催化条件下的8-氨基喹啉C(5)位碳-氢键亲核氟化反应.使用廉价易得且安全稳定的氟化银作为亲核氟化试剂,反应无需惰性气体保护,条件简单,操作方便,区域选择性好,底物范围较广,为喹啉类化合物的氟化提供了一种有潜在应用价值的新方法.     

Elaboration of nanometric amorphous silica from quartz-based minerals using the fluorination method

A method of elaboration of nanometric amorphous silica is proposed using a rational processing of quartz-based ores with the help of a fluorination method. The different steps of the process are described, including the kinetics of the interaction mechanism of ammonium bifluoride with the initial raw materials, the sublimation of ammonium fluorosilicate and the formation of nanometric amorphous silica. Rate constants and activation energy of the chemical reactions are calculated.     

Ring-Opening Fluorination of Carbo/Heterocycles and Aromatics: Construction of Complex and Diverse Fluorine-Containing Molecules

Fluorine-containing molecules have attracted much attention in medicinal, agrochemical, and materials sciences because they offer unique physical and biological properties. Therefore, many efficient fluorination reactions have been developed over the years. Recent advancements in fluorination chemistry have expanded the range of substrates, and regioselectivity/stereoselectivity control has also been achieved. Ring-opening fluorination is an efficient method to construct complex fluorine-containing molecules with diversity, starting from simple cyclic compounds. This review aims to summarize developments in ring-opening fluorination, particularly with larger-sized cyclic compounds. Fluorine introduction and bond cleavage of cyclic compounds such as carbocycles, heterocycles, and aromatics provide efficient access to fluorine-containing compounds that are difficult to be synthesized by conventional methods.     

Organic compounds containing a pentafluorothio group

The addition of sulfur chloride pentafluoride to various terminal olefins, including those containing functional substituents, was studied. Possible side processes in these reactions are oligomerization and fluorination of the starting olefin.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2952–2954, December, 1996.     

New method of fluorination using potassium fluoride in ionic liquid: significantly enhanced reactivity of fluoride and improved selectivity

We have found the new nucleophilic fluorination reaction of some halo- and mesylalkanes to the corresponding fluoroalkanes with KF in the presence of [bmim][BF4] under various reaction conditions. 2-(3-Methanesulfonyloxypropoxy)naphthalene (1) was used as a model compound to optimize this fluorination reaction. Whereas the fluorination of the mesylate 1 with KF in an organic solvent such as CH3CN at 100 degrees C occurred hardly even after 24 h, the same reaction in ionic liquids, [bmim][BF4], as a reaction solvent was completed within 1.5 h, affording the wanted product 2-(3-fluoropropoxy)naphthalene 2a (85%) together with the alkene byproduct 2c (10%). Very interestingly, however, the addition of water (5 equiv) completely eliminated the formation of the undesired alkene 2c and thus gave higher yield of 2a (92%, entry 2). The use of acetonitrile as a cosolvent did not affect the reactivity of the fluorination. The presence of a proper amount of cosolvent was rather desirable (94% yield of 2a). We performed fluorination reactions with other ionic liquids ([bmim][PF6], [bmim][SbF6], [bmim][OTf], and [bmim][N(Tf)2], and two other cosolvents, to find the optimal ionic liquid and cosolvent. Nine different compounds were examined, including the 10 g-synthesis of 2-(fluoromethyl)naphthalene in 93% of isolated yield.     

Fluorination rates of polyolefins as a function of structure and gas atmosphere

Polyolefins and fluoropolymers were reacted with elemental fluorine under carefully controlled conditions in a thermobalance adapted to be compatible with fluorine gas. The fluorination reactions were monitored by measuring the mass increase as a result of hydrogen substitution by fluorine. The mass increase was directly proportional to the square root of the fluorination time, which indicates that fluorine gas diffusion to the unreacted surface is the rate determining step. The fluorination rate was increased by increasing the fluorine concentration and the fluorination temperature. The fluorination rate is higher when nitrogen rather than helium is used as diluting gas. The fluorination rate for the reaction in which CO₂ is used as diluting gas is the same as during fluorination with nitrogen as diluting gas, while the presence of oxygen dramatically decreased the fluorination rate. Oxygen is incorporated during fluorination with oxygen as diluting gas, while no functionalization was observed when CO₂ was employed as diluting gas. The effect of polymer structure on fluorination was studied. Poly(vinylfluoride) gained mass during fluorination, while no reaction was observed for poly(vinylidenefluoride). The reaction rate for polypropylene was higher than that of polyethylene. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Palladium‐Catalyzed Fluorination of Cyclic Vinyl Triflates: Effect of TESCF3 as an Additive

A method for the palladium‐catalyzed fluorination of cyclic vinyl triflates has been developed. As with several previous palladium‐catalyzed fluorination reactions using fluoride salts, controlling the regioselectivity presented a challenge in developing a practical synthetic procedure. The addition of triethyl(trifluoromethyl)silane (TESCF₃) was found to effectively address this problem and resulted in drastically improved regioselectivities in this palladium‐catalyzed fluorination reaction. This discovery, along with the use of a new biarylphosphine ligand, allowed for the development of an efficient and highly regioselective protocol for the fluorination of vinyl triflates. This method is compatible with a range of sensitive functional groups and provides access to five‐, six‐, and seven‐membered cyclic vinyl fluorides.