Elastomeric flexible free-standing hydrogen-bonded nanoscale assemblies

Poly(ethylene oxide) (PEO) is a key material in solid polymer electrolytes, biomaterials, drug delivery devices, and sensors. Through the use of hydrogen bonds, layer-by-layer (LBL) assemblies allow for the incorporation of PEO in a controllable tunable thin film, but little is known about the bulk properties of LBL thin films because they are often tightly bound to the substrate of assembly. The construction technique involves alternately exposing a substrate to a hydrogen-bond-donating polymer (poly(acrylic acid)) and a hydrogen-bond-accepting polymer (PEO) in solution, producing mechanically stable interdigitated layers of PEO and poly(acrylic acid) (PAA). Here, we introduce a new method of LBL film isolation using low-energy surfaces that facilitate the removal of substantial mass and area of the film, allowing, for the first time, the thermal and mechanical characterization that was previously difficult or impossible to perform. To further understand the morphology of the nanoscale blend, the glass transition is measured as a function of assembly pH via differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The resulting trends give clues as to how the morphology and composition of a hydrogen-bonded composite film evolve as a function of pH. We also demonstrate that LBL films of PEO and PAA behave as flexible elastomeric blends at ambient conditions and allow for nanoscale control of thickness and film composition. Furthermore, we show that the crystallization of PEO is fully suppressed in these composite assemblies, a fact that proves advantageous for applications such as ultrathin hydrogels, membranes, and solid-state polymer electrolytes.     

A SIMPLE METHOD FOR THE INCORPORATION OF LOW MOLECULAR WEIGHT DYES IN ULTRATHIN FILMS

A simple method for the fabrication of ultrathin films containing low molecular weight dye material is introduced(post-adsorption technique). The chromophore used is 4-nitro-4'-decyloxy azobenzene quaternary ammonium salt (azo-10Q).In classical layer-by-layer (LBL) procedures, where the substrate is dipped alternately into the chromophore solution and thecomplementary polyelectrolyte, the chromophore tends to desorb from the film during subsequent immersion in thepolyanion solution, and there is little or no indication of multilayer growth. The extent of desorption depends somewhat onthe selection of polyelectrolyte, the ionic strength and the pH of solution. An alternative approach is to first prepareconventional LBL films from a pair of oppositely charged polyelectrolytes, and then to soak this film into the chromophoresolution, where adsorption by penetration into the LBL film may take place. In preliminary results, a linear dependence ofUV absorbance on layer number of LBL film thus prepared was found, demonstrating the apparent effectiveness of the post-adsorption technique for the preparation of azo-10Q-containing ultrathin films.     

pH-dependent behaviors of electroactive myoglobin loaded into layer-by-layer films assembled with alginate and hydroxyethyl cellulose ethoxylate

In the present work, strong polybase quaternized hydroxyethyl cellulose ethoxylate (HECE) and weak polyacid alginate (AA) were assembled into {HECE/AA} n layer-by-layer (LBL) films on electrodes by electrostatic interaction between them, and the films were then immersed in myoglobin (Mb) solution to load Mb into the films, designated as {HECE/AA}n-Mb. The {HECE/AA}n-Mb films showed a nearly reversible cyclic voltammetric (CV) peak pair at about -0.34 V vs SCE in pH 7.0 buffers for Mb heme Fe(III)/Fe(II) redox couple, and the surface concentration of electroactive Mb in the films (Gamma*) was affected significantly by the pH of Mb loading solution and testing solution. The amount of Mb loaded from pH 5.0 solution was much larger than that from pH 9.0 solution, which is mainly attributed to the higher degree of swelling, porosity, and permeability of {HECE/AA}n films at pH 5.0 than at pH 9.0. In addition, the electrostatic interaction between Mb and the AA component in the films might also play an important role in Mb loading. The pH of the testing solution where {HECE/AA}n-Mb films were tested by CV also influenced the Gamma* value, showing that the fraction of electroactive Mb among the total Mb loaded into the films increased remarkably as the pH of the testing solution decreased. This result is rationalized in terms of the pH-dependent film permeability toward counterions and the electron-hopping mechanism in electron transfer of redox proteins in the film phase. This model system may provide a general and effective approach to control the electroactivity of immobilized redox proteins in the multilayer assembly containing weak polyions by adjusting pH and may guide us to develop the new kind of controllable electrochemical biosensors based on the direct electrochemistry of enzymes.     

Stable aqueous nanoparticle film assemblies with covalent and charged polymer linking networks

The construction of highly stable and efficiently assembled multilayer films of purely water soluble gold nanoparticles is reported. Citrate-stabilized nanoparticles (CS-NPs) of average core diameter of 10 nm are used as templates for stabilization-based exchange reactions with thioctic acid to form more robust aqueous NPs that can be assembled into multilayer films. The thioctic acid stabilized nanoparticles (TAS-NPs) are networked via covalent and electrostatic linking systems, employing dithiols and the cationic polymer poly(L-lysine), respectively. Multilayer films of up to 150 nm in thickness are successfully grown at biological pH with no observable degradation of the NPs within the film. The characteristic surface plasmon band, an optical feature of certain NP film assemblies that can be used to report the local environment and core spacing within the film, is preserved. Growth dynamics and film stability in solution and in the air are examined, with poly(L-lysine) linked films showing no evidence of aggregation for at least 50 days. We believe these films represent a pivotal step toward exploring the potential of aqueous NP film assemblies as a sensing apparatus.     

Layer-by-layer deposition of rhenium-containing hyperbranched polymers and fabrication of photovoltaic cells

Multilayer thin films were prepared by the layer-by-layer (LBL) deposition method using a rhenium-containing hyperbranched polymer and poly[2-(3-thienyl)ethoxy-4-butylsulfonate] (PTEBS). The radii of gyration of the hyperbranched polymer in solutions with different salt concentrations were measured by laser light scattering. A significant decrease in molecular size was observed when sodium trifluoromethanesulfonate was used as the electrolyte. The conditions of preparing the multilayer thin films by LBL deposition were studied. The growth of the multilayer films was monitored by absorption spectroscopy and spectroscopic ellipsometry, and the surface morphologies of the resulting films were studied by atomic force microscopy. When the pH of a PTEBS solution was kept at 6 and in the presence of salt, polymer films with maximum thickness were obtained. The multilayer films were also fabricated into photovoltaic cells and their photocurrent responses were measured upon irradiation with simulated air mass (AM) 1.5 solar light. The open-circuit voltage, short-circuit current, fill factor, and power conversion efficiency of the devices were 1.2 V, 27.1 mu A cm(-2), 0.19, and 6.1x10(-3) %, respectively. The high open-circuit voltage was attributed to the difference in the HOMO level of the PTEBS donor and the LUMO level of the hyperbranched polymer acceptor. A plot of incident photon-to-electron conversion efficiency versus wavelength also suggests that the PTEBS/hyperbranched polymer junction is involved in the photosensitization process, in which a maximum was observed at approximately 420 nm. The relatively high capacitance, determined from the measured photocurrent rise and decay profiles, can be attributed to the presence of large counter anions in the polymer film.     

自掺杂基团对聚苯胺自组装膜电化学性能的影响

基于离子相互作用,实现了以聚苯胺(PANI)为聚阳离子,以聚(邻氨基苯甲酸)(PCAN)、聚(邻氨基苯磺酸)(PSAN)为聚阴离子的层-层自组装,形成层厚均匀的全共轭超薄功能膜.由于磺酸基—SO3-的电负性高于—COO-,使得PANI-PSAN自组装膜沉积量小于PANI-PCAN;电化学实验结果显示,由于PCAN和PSAN的导电性均弱于PANI,所以两种自组装膜的电化学性能取决于PANI,但同时受到羧酸、磺酸基团的较大影响,使得PANI-PCAN自组装膜的电化学性能要优于PANI-PSAN.     

Bioassisted synthesis of catalytic gold/silica nanotubes using layer-by-layer assembled polypeptide templates

We report the bioassisted synthesis of gold nanoparticle/silica (Au NP/silica) tubes using layer-by-layer (LBL) assembled poly(L-lysine)/poly(L-tyrosine) (PLL/PLT) multilayer films deposited on the polycarbonate (PC) membrane pores as both mediating agents and templates. The novelty of this approach is the in situ synthesis of Au NP/silica tubes using PLL/PLT multilayer films for sequential growth of Au NPs and silicas. The experimental data revealed that the buildup of the LBL multilayer films was mainly driven by the formation of hydrogen bond and the polypeptide macromolecular assemblies adopted mainly β-sheet conformation. The as-prepared Au NP/silica tubes possessed promising catalytic activity toward the reduction of p-nitrophenol. The synthesis conditions such as the concentration of gold precursor and polypeptide molecular weight were found to influence the gold weight ratio and particle size in the tubes and the catalytic properties of the Au NP/silica tubes. This approach provides a facile, robust, and green method to obtain nonaggregated metal nanoparticles immobilized in porous oxide network at ambient conditions. Using the synergy between biomimetic or bioassisted synthesis of nanostructured materials and LbL assembly technique, a variety of structures such as films, tubes, and capsules comprising of multiple compositions can be obtained.     

Facile and efficient approach to speed up layer-by-layer assembly: dipping in agitated solutions

A facile and efficient approach has been developed to speed up the fabrication of LBL films through sequential dipping in vigorously agitated solutions. By this agitated-dipping (AD) LBL technique, the multilayer films of PAH and PSS were fabricated. The resulting films were explored by UV-vis spectroscopy, X-ray reflectivity, and AFM. Meanwhile, the comparison of the AD and conventional LBL films was made, which demonstrated that AD LBL can decrease dipping time by more than 15 times without reducing film quality remarkably. In addition, to verify the generality of AD LBL, we studied the AD LBL films of PDDA/PSS and PAH/PAA preliminarily as well. AD LBL promotes the efficiency of conventional LBL greatly while preserving its most advantages, such as simplicity, cheapness, precise control, universality in substrates, recycling use of sample solutions, and so on. It would be a promising alternative to build up LBL films rapidly.     

Enhanced Salt Tolerance of Polyurethane Based Multilayer Films

In our previous study, polyurethane (PU) based multilayer films assembled with weak polyelectrolytes exhibited controllable loading and release properties, but would be decomposed in high salt solution. Herein, a strong polyelectrolyte, poly(styrene sulfonic acid) sodium (PSS), was introduced to fabricate multilayer films. The salt tolerance of the film was investigated by evaluating the loading and release profiles towards model drug in salt solution with different concentrations. Results showed that the release behavior of the film, as well as its loading capacity, can be tuned by varying the salt concentrations. And the film showed a good salt tolerance that can remain integrity even after 6 cycles of drug loading and release in 600 mmol·L^?1 NaCl solution. It showed that the salt tolerance of PU based films can be greatly improved through assembling with strong polyelectrolyte.     

Carbon nanotubes/(pLys/dsDNA) n layer-by-layer multilayer films for electrochemical studies of DNA damage

Carboxylic group-functionalized carbon nanotubes (c-CNT) were modified on the surface of carbon paste electrode to obtain a conducting precursor film. Positively charged poly-l-lysine (pLys) and negatively charged double-stranded DNA (dsDNA) were alternately adsorbed on the c-CNT-modified electrode, forming (pLys/dsDNA) _n layer-by-layer (LBL) films. Cyclic voltammetry and electrochemical impedance spectroscopy of the electroactive probe [Fe(CN)₆]^3−/4− could give the valuable dynamic information of multilayer films growth. The oxidative DNA damage induced by cadmium ion (Cd²⁺) in the LBL multilayer films was studied by differential pulse voltammetry (DPV) with methylene violet (MV) as the intercalation redox probe. The electrochemical signals of MV on the multilayer films were effectively amplified via LBL technology. The specific intercalation of MV into dsDNA base pairs and the amplified electrochemical response of MV, combined with the unique feature of loading reversibility of MV in the DNA layer-by-layer films, made the difference in DPV response between the intact, and damaged dsDNA films become pronounced. This biosensor exhibited that the (pLys/dsDNA) _n films could be utilized for investigations of DNA damage.     

Molecular dynamics simulations of multilayer films of polyelectrolytes and nanoparticles

We performed molecular dynamics simulations of multilayer assemblies of flexible polyelectrolytes and nanoparticles. The film was constructed by sequential adsorption of oppositely charged polymers and nanoparticles in layer-by-layer fashion from dilute solutions. We have studied multilayer films assembled from oppositely charged polyelectrolytes, oppositely charged nanoparticles, and mixed films containing both nanoparticles and polyelectrolytes. For all studied systems, the multilayer assembly proceeds through surface overcharging after completion of each deposition step. There is almost linear growth in the surface coverage and film thickness. The multilayer films assembled from nanoparticles show better layer stratification but at the same time have higher film roughness than those assembled from flexible polyelectrolytes.     

Competition of hydrogen-bonding and electrostatic interactions within hybrid polymer multilayers

Using a layer-by-layer sequential adsorption technique, we report the construction of hybrid films in which layers of hydrogen-bonded polymers are embedded within electrostatically associated polyelectrolytes. The components of the hybrid film include a neutral hydrogen-bonding polymer, a weak polycarboxylic acid, and a strong polycation. Depending on the pH value used for the deposition of the electrostatic film, we found two distinctive regimes of film growth. At pHs lower than a critical value, deposition of electrostatic layers occurred on top of hydrogen-bonded stacks to produce hybrid, three-component films. At pHs higher than a critical value, neutral, hydrogen-bonded chains were displaced by the adsorbing chains of the polycation, producing two-component films. The property of the hydrogen-bonded stacks of hybrid films to be selectively dissolved by exposing them to a high pH makes these films promising candidates for producing free polyelectrolyte films.     

Preparation and characterization of covalently bonded PVA/Laponite/HAPI nanocomposite multilayer freestanding films by layer‐by‐layer assembly

The layer‐by‐layer (LBL) assembly technique is an attractive method to make functional multilayer thin films and has been applied to fabricate a wide range of materials. LBL materials could improve optical transmittance and mechanical properties if the film components were covalently bonded. Covalently bonded nanocomposite multilayer films were prepared by employing hydrophilic aliphatic polyisocyanate (HAPI) as the reactive component, to react with Laponite and polyvinyl alcohol (PVA). FT‐IR spectra suggested that HAPI reacted with Laponite and PVA at ambient temperature rapidly. Ellipsometry measurement showed that the film thickness was in linear growth. The influences of HAPI on the optical, mechanical and thermal properties of the films were investigated by UV‐Vis spectroscopy, tensile stress measurement, DSC and TGA. The obtained results showed that the optical transmittance and mechanical strength were enhanced when the film components were covalently bonded by HAPI. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 545–551     

pH-sensitive bipolar ion-permselective ultrathin films

pH-Sensitive bipolar ion-permselective films of polyelectrolyte multilayers were prepared by layer-by-layer (LbL) assembly and photo-cross-linking of benzophenone-modified poly(acrylic acid) (PAA-BP) and poly(allylamine hydrochloride) (PAH-BP). The multilayer structure and ionizable group composition was finely tuned by changing the pH of the dipping solution. This structure and composition was in turn "preserved" by photo-cross-linking, forming highly stable membrane films. Since PAA-BP and PAH-BP are weak polyelectrolytes, it is possible to control the number of unbound, un-ionized -COOH or -NH2 groups in the multilayer by changing the pH. Moreover, the pH of the deposited film also plays an important role in determining selective latter permselectivity. For example, PAA-BP/PAH-BP multilayers deposited from two pH conditions, pH = 3 (PAA-BP) and pH = 6 (PAH-BP), showed pH-switchable permselectivity for both cationic (pH = 10) and anionic (pH = 3) probe molecules in a single film. The system offers advantages in film stability and introducing reversible selective ion permeability over previous multilayer film and cross-linking methods.     

Amperometric choline biosensors prepared by layer-by-layer deposition of choline oxidase on the Prussian blue-modified platinum electrode

An amperometric choline biosensor was developed by immobilizing choline oxidase (ChOx) in a layer-by-layer (LBL) multilayer film on a platinum (Pt) electrode modified with Prussian blue (PB). 6-O-Ethoxytrimethylammoniochitosan chloride (EACC) was used to prepare the ChOx LBL films. The choline biosensor was used at 0.0 V versus Ag/AgCl to detect choline and exhibited good characteristics such as relative low detection limit (5 × 10⁻⁷ M), short response time (within 10 s), high sensitivity (88.6 μA mM⁻¹ cm⁻²) and a good selectivity. The results were explained based on the ultrathin nature of the LBL films and the low operating potential that could be due to the efficient catalytic reduction of H₂O₂ by PB. In addition, the effects of pH, temperature and applied potential on the amperometric response of choline biosensor were evaluated. The apparent Michaelis-Menten constant was found to be (0.083 ± 0.001) ×10⁻³ M. The biosensor showed excellent long-term storage stability, which originates from a strong adsorption of ChOx in the EACC multilayer film. When the present choline biosensor was applied to the analysis of phosphatidylcholine in serum samples, the measurement values agreed satisfactorily with those by a hospital method.     

Fabrication of photosensitive multilayer films based on polyoxometalate and diazoresin

A novel photosensitive organic-inorganic composite film incorporating polyoxometalate, K7[SiW11O39Co(H3P2O7)] (SiW11CoPP), and diazoresin (DR) has been prepared via layer-by-layer (LBL) self-assembly. Under UV irradiation, followed the decomposition of diazonium in DR, the ionic bonds between the adjacent interfaces of the multilayer film convert to covalent bonds. The LBL multilayers were characterized by UV-vis spectroscopy, X-ray photoelectron spectra (XPS), atomic force microscopy (AFM), FTIR spectrum, cyclic voltammograms (CV), and electron spin resonance (ESR) measurements. UV spectroscopy shows that the deposition process is regular and highly reproducible from layer to layer. XPS spectra confirm the incorporation of DR and SiW(11)CoPP into the films. Atomic force microscopy image indicates that the film surface is uniform and smooth. Solvent etching experiment proves that the film has significant stability towards polar solvent. Electrochemical behavior of the multilayers is investigated.     

Photocatalytic Nanocomposite Films Fabricated by Layer‐by‐Layer Self‐assembly of TiO2 Nanoparticles and Lignosulfonates

Photocatalytic multilayer nanocomposite films composed of anatase TiO₂ nanoparticles and lignosulfonates (LS) were fabricated on quartz slides by the layer‐by‐layer (LBL) self‐assembly technique. X‐ray photoelectron spectroscopy (XPS), UV‐vis spectroscopy and atomic force microscopy (AFM) were used to characterize the TiO₂/LS multilayer nanocomposite films. Moreover, the photocatalytic properties (decomposition of methyl orange and bacteria) of multilayer nanocomposite films were investigated. XPS results indicated that the intensities of titanium and sulfur peaks increased with the LBL deposition process. A linear increase in absorbance at 280 nm was found by UV‐Vis spectroscopy, suggesting that stepwise multilayer growth occurs on the substrate and this deposition process is highly reproducible. AFM images showed that quartz slide was completely covered by TiO₂ nanoparticles when a 10‐bilayer multilayer film was formed. The decomposition efficiency of methyl orange by TiO₂/LS multilayer films under the same UV irradiation time increased linearly with the number of TiO₂ layers, and the results of decomposition of bacteria under UV irradiation showed that TiO₂/LS multilayer nanocomposite films exhibited excellent decomposition activity of bacteria (Escherichia coil).     

Multilayer assembly and patterning of poly(p-phenylenevinylene)s via covalent coupling reactions

Poly(p-phenylenevinylene)s with amines and pentafluorophenyl esters on side chains were synthesized and assembled on solid substrates by sequential layer-by-layer (LBL) deposition. This approach enables the creation of robust multilayer thin films via in-situ covalent coupling reactions between successive layers. The buildup of the multilayers was followed by UV/vis absorption spectroscopy and ellipsometry. The observed complex assembly behavior suggests that both covalent and hydrogen-bonding interactions are involved in the formation of multilayer films. The organized structure and surface morphology of resultant multilayers were investigated by reflectance Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. This covalent LBL method was further applied to generate conjugated polymer micropatterns using microstamped self-assembled monolayers as templates.     

pH responsive,reversible photo-crosslinkable micelle in layer-by-layer assembly—Study on film growth and drug delivery behavior

Layer-by-layer multilayered film has been creating great opportunities in developing controlled drug and other bioactive molecular delivery system. In this work, coumarin bearing micelles of poly(acrylic acid-coumarin methacrylate) is first synthesized in a one-step copolymerization and the reversible photo-crosslinkable multilayers containing coumarin groups are then fabricated via layering the micelles with polyethyleneimine (PEI). The film growth behavior of polyetheleneimine/poly(acrylic acid-coumarin methacrylate) (PEI/P(AA-r-CMA)) multilayer is found to rely on deposit solution pH. Increasing PEI solution pH and decreasing P(AA-r-CMA) pH can greatly accelerate film growing process. This is explained by PEI diffusivity and destabilization of P(AA-r-CMA) micelle at solution/multilayer interface. Nile red (NR) is loaded into the film as a model drug via simple post diffusion driven by hydrophobic interactions. Furthermore, photo-crosslink and decrosslink of PEI/P(AA-r-CMA) film is achieved by irradiating the films with light of 365 and 254 nm wavelength, respectively, which therefore ensures the possibility of fine control over drug delivery procedure.     

Alternate assemblies of polyelectrolyte functionalized carbon nanotubes and platinum nanoparticles as tunable electrocatalysts for dioxygen reduction

A novel method based on electrostatic layer-by-layer self-assembly (LBL) technique for alternate assemblies of polyelectrolyte functionalized multi-walled carbon nanotubes (MWNTs) and platinum nanoparticles (PtNPs) is proposed. The shortened MWNTs can be functionalized with positively charged poly(diallyldimethylammonium chloride) (PDDA) based on electrostatic interaction. Through electrostatic layer-by-layer assembly, the positively charged PDDA functionalized MWNTs (PDWNTs) and negatively charged citrate-stabilized PtNPs were alternately assembled on a 3-mercaptopropanesulfonic sodium (MPS) modified gold electrode and also on other negatively charged surface, e.g. quartz slide and indium–tin-oxide (ITO) plate, directly forming the three-dimensional (3D) nanostructured materials. This is a very general and powerful technique for the assembling three-dimensional nanostructured materials containing carbon nanotubes (CNTs) and nanoparticles. Thus prepared multilayer films were characterized by ultraviolet–visible–near-infrared spectroscopy (UV–vis–NIR), scanning electron microscopy (SEM) and cyclic voltammetry (CV). Regular growth of the mutilayer films is monitored by UV–vis–NIR. SEM provides the morphology of the multilayer films. The PtNPs containing multilayer films exhibit high electrocatalytic activity for the reduction of dioxygen. Furthermore, the electrocatalytic activity of the films could be further tailored by simply choosing different cycles in the LBL process. This assembling method for polyelectrolyte functionalized carbon nanotubes and nanoparticles introduces new opportunities for the incorporation of various functionalities into nanotube devices, which, in turn, opens up the possibility of building more complex multicomponent nanostructures.