A surprising method for green extraction of essential oil from dry spices: Microwave dry-diffusion and gravity

Without adding any solvent or water, we proposed a novel and green approach for the extraction of secondary metabolites from dried plant materials. This "solvent, water and vapor free" approach based on a simple principle involves the application of microwave irradiation and earth gravity to extract the essential oil from dried caraway seeds. Microwave dry-diffusion and gravity (MDG) has been compared with a conventional technique, hydrodistillation (HD), for the extraction of essential oil from dried caraway seeds. Essential oils isolated by MDG were quantitatively (yield) and qualitatively (aromatic profile) similar to those obtained by HD, but MDG was better than HD in terms of rapidity (45min versus 300min), energy saving, and cleanliness. The present apparatus permits fast and efficient extraction, reduces waste, avoids water and solvent consumption, and allows substantial energy savings.     

Superheated water extraction, steam distillation and Soxhlet extraction of essential oils of Origanum onites

Superheated water extraction (SWE) at various temperatures (100, 125, 150 and 175°C), steam distillation, and Soxhlet extraction were compared in the extraction of essential oils from two samples of the plant Origanum onites, one cultivated, the other wild. C18 solid-phase extraction was used to elute the essential oils from the SWE aqueous extract. The compositions of the extracted essential oils obtained from all three methods were then characterized by comprehensive GC×GC/time-of-flight mass spectrometry (TOF/MS). The highest essential oil yields were obtained by using SWE at 150°C with a flow rate of 2 mL min^–1 and a pressure of 60 bar for 30 min: these were 3.76 and 4.11% for wild and cultivated O. onites samples, respectively, expressed as a percentage of 100 g of dry (leaf) matter. The yields obtained using SWE at 150°C were slightly higher than those from conventional methods. Steam distillation was performed for 3 h, and Soxhlet extraction was completed in 12 h. The major compounds found were borneol, terpinen-4-ol and carvacrol.     

Superheated water extraction of essential oils of Origanum micranthum

Superheated water extraction is used to extract essential oil of leaves of Origanum micranthum. The effect of different temperatures on the essential oil profile and rate of extraction as a function of time is investigated. The components of essential oil of Origanum micranthum are removed from the aqueous extract by C18 solid-phase extraction. The identification of components is carried out using comprehensive gas chromatography-time of flight-mass spectrometry. The number of extracted components is almost the same; however, the concentrations change with changing temperature. The highest yield (0.64%) is found at a temperature of 150 degrees C, 2 mL/min and 60 bar for 30 min. The increasing temperature from 100 degrees C to 175 degrees C increased the rate of extraction of six selected components of essential oil of Origanum micranthum. cis-Sabinenehydrate exhibits the fastest rate of extraction at all temperatures studied. Some degradation products are observed at a temperature of 175 degrees C.     

Isolation of essential oils from tobacco by gas co-distillation/solvent extraction

Summary The essential oils have been isolated from tobacco leaves using a simple gas co-distillation apparatus. The method involves co-distillation with water under the continuous stream of an inert gas with subsequent single solvent extraction of the distillate. The extract is analysed on GC and GC/MS in splitless injection mode without further concentration. The method was evaluated for reproducibility using n-octadecane as an internal standard. The distillation-extraction procedure was reporducible with an average deviation of ±3% for the major constituents. The present method was applied to the analyses of the essential oils of other agricultural products.Dedicated to Dr. L. S. Ettre on the occasion of his 60th birthday.     

Instant controlled pressure drop extraction of lavandin essential oils: Fundamentals and experimental studies

Détente Instantanée contrôlée (DIC), French for Instant Controlled Pressure Drop, was performed on laboratory apparatus as well as on a pilot plant for proving its feasibility, and identifying the optimized processing conditions and recognizing the energy consumption and the quantity of water used for such an operation. GC–MS and SPME analysis of the extracts and residue material were carried out to assess the extracts and solid residues. The lavandin essential oils obtained by using the new DIC extraction process was studied, modeled and quantitatively and qualitatively compared to the conventional hydrodistillation method. The most important differences between the two essential oils were reflected in the yields, with 4.25 as against 2.3 g EO/100 g of raw matter, and in the extraction time, with 480 s as against some hours for respectively the DIC and the hydrodistillation operations. These differences have been previewed through the fundamental analysis. They can normally explain the great decreasing of energy consumption to be 662 kWh/t of raw material. The amount of water to be added was about 42 kg water/t of raw material.     

Comparison of Eucalyptus cinerea essential oils produced by hydrodistillation and supercritical carbon dioxide extraction

The essential oil of Eucalyptus cinerea is reported to possess a higher 1,8-cineole content than other Eucalyptus species. Variations in the quantitative and qualitative characteristics of E. cinerea oil produced by hydrodistillation (HD) and supercritical carbon dioxide extraction (SCE) techniques and a comparison between glycoside-bound and free volatile constituents produced by HD have been studied. It was found that HD produced higher oil (free volatiles) content (3.1%) as compared with SCE (1.1%), whereas bound volatiles constituted only about 0.4%. Gas chromatographic (GC) analysis of the oil samples revealed significant difference in their chemical composition. The essential oil (free volatiles) produced by HD contained 1,8-cineole (85.1%) as the major constituent, followed by a-terpineol (7.2%) and limonene (4.4%). In the bound volatile fraction produced by HD, 1,8 cineole (20.6%), alpha-terpineol (7.6%), p-cymene (6.3%), and limonene (4.5%) were found as major constituents. The extract produced by SCE was dominated by 1,8-cineole (70.4%), a-terpineol (8.6%), globulol (3.1%), aromadendrene (2%), citronellal (1.7%), viridiflorol (1.3%), phytol (1.1%) and terpinen-4-ol (1%). Although HD produced higher oil yields, SCE produced better extract in terms of the number of components detected.     

Arrowroot starch-based films incorporated with a carnauba wax nanoemulsion,cellulose nanocrystals,and essential oils: a new functional material for food packaging applications

Arrowroot starch (AA)-based films incorporated with a carnauba wax nanoemulsion (CWN), cellulose nanocrystals (CNCs), and essential oils (EOs) from Mentha spicata (MEO) and Cymbopogon martinii (CEO) were produced using the casting technique and then characterized in terms of their water barrier, tensile, thermal, optical, and microstructural properties and in vitro antifungal activity against Rhizopus stolonifer and Botrytis cinerea. Whereas the incorporation of CNCs decreased the moisture content and water vapor permeability of the AA/CWN/CNC film, the additional incorporation of either EO decreased the transparency and affected the microstructure of the AA/CWN/CNC/EO nanocomposites. MEO and CEO incorporation improved the thermal stability of the films and provided excellent protection against fruit-spoiling fungi. Because of their excellent barrier properties against fungal growth, water vapor permeability, and ultraviolet and visible light, these AA/CWN/CNC/EO films have promising potential for application as active food packaging or coating materials.

Graphic abstract

     

Reactive nano-essential oils for sustained release of essential oils and application to wallpaper

Essential oils are a volatile and aromatic substance with a variety of active biological activities. However,the excessive volatility and inconvenience of the use of essential oils limit their applications. In this study,we developed a reactive mesoporous silica nanoparticle(rMSNs) based on cyanuric chloride modification for essential oil encapsulation and commodity adhesion. The large pore volume and specific surface area of rMSNs facilitate the nanoparticles adhering to a large amount of essen...     

Reverse fluorous solid-phase extraction: a new technique for rapid separation of fluorous compounds

Fluorous-tagged compounds can rapidly be separated from organic (non-tagged) compounds by the new separation technique of reverse fluorous solid-phase extraction (r-fspe). In a reversal of the roles of solid and liquid phases in standard fluorous spe, a mixture is charged to a polar solid phase (standard silica gel) and then eluted with a fluorous solvent or solvent mixture. The organic components of the mixture are retained, while the fluorous components pass. [structure: see text]     

An integrated simultaneous distillation–extraction apparatus for the extraction of essential oils from herb materials and its application in Flos Magnoliae

A large number of herb materials contain essential oils with extensive bioactivities. In this work, an integrated simultaneous distillation–extraction (ISDE) apparatus was developed. To demonstrate its feasibility, the performance of ISDE was evaluated for the extraction of essential oil from Flos Magnoliae and compared with conventional techniques including steam distillation (SD) and simultaneous distillation–extraction (SDE). According to the product yield, the time consumed and the composition of oil, the essential oils isolated by ISDE were better than that obtained by SD and similar to those obtained by SDE. ISDE was also better than SDE due to its simple operation and lower consumption of energy and organic solvent. Copyright © 2009 John Wiley & Sons, Ltd.     

Application of factorial design and Box-Behnken matrix in the optimisation of a microwave-assisted extraction of essential oils from Salvia mirzayanii

Essential oil of Salvia mirzayanii cultivated in Iran was obtained by microwave assisted extraction (MAE) procedures. The essential oil was analysed by capillary gas chromatography using flame ionisation and mass spectrometric detections. The effects of different parameters, such as microwave power, temperature, time and type of solvent on the MAE of Salvia mirzayanii oil were investigated. Results of the two-level fractional factorial design (2(4-1)) based on an analysis of variance demonstrated that only the power, temperature and type of solvent were statistically significant. Optimal conditions for the extraction of essential oils were obtained by using Box-Behnken design. For optimum recovery of essential oil the variables power, temperature and solvent values were 115?W, 50°C and 14?s, respectively. Under the optimised experimental conditions, the extraction yield of microwave assisted extraction was 11.2% (w/w).     

Microwave extraction of essential oils from dried fruits of Illicium verum Hook. f. and Cuminum cyminum L. using ionic liquid as the microwave absorption medium

Ionic liquid was used as microwave absorption medium and applied to the extraction of essential oils from dried fruits of the Illicium verum Hook. f. and Cuminum cyminum L. by microwave‐assisted extraction. The extraction time is less than 15 min at the microwave power of 440 W. The constituents of essential oils obtained by the proposed method were compared with those obtained by hydrodistillation. There is no obvious difference in the constituents of essential oils obtained by the two methods.     

Antibacterial activities of essential oils extracted from leaves of Murraya koenigii by solvent-free microwave extraction and hydro-distillation

Solvent-free microwave extraction (SFME) for the isolation of essential oil from leaves of Murraya koenigii L. (Rutaceae) has been compared with the conventional hydro-distilled oil (HD) in terms of yield, composition, antioxidant activity, and antibacterial activity against Listeria innocua. The yield of essential oil obtained from 30 min of SFME was similar to that of HD for 180 min. By GC-MS analysis, the major compounds of the essential oil extracted by SFME, which were obtained in somewhat lower amounts than in the essential oil obtained by HD, were alpha-copaene (44.3%), beta-gurjunene (25.5%), isocaryophyllene (12.1%), beta-caryophyllene (8.7%) and germacrene D (2.9%). The content of oxygenated terpenes, slightly higher for the SFME-essential oil (2.3%) than the HD-essential oil (1.4%), were much lower than that of nonoxygenated terpenes in both oils. DPPH radical scavenging activities of both essential oils were relatively low (10%-24%). Complete inhibition of growth of L. innocua was observed with both SFME and HD essential oils, at 400 and 600 microg/mL (minimum inhibitory concentration), respectively. The SFME-essential oil at 300 microg/mL provided 92% inhibition, indicating its potential as a natural antimicrobial agent.     

Antioxidant and anti-inflammatory activities of essential oils: a short review

Essential oils are complex mixtures isolated from aromatic plants which may possess antioxidant and anti-inflammatory activities of interest in thye food and cosmetic industries as well as in the human health field. In this work, a review was done on the most recent publications concerning their antioxidant and anti-inflammatory activities. At the same time a survey of the methods generally used for the evaluation of antioxidant activity and some of the mechanisms involved in the anti-inflammatory activities of essential oils are also reported.     

Microwave assisted extraction of essential oils from enzymatically pretreated lavender (<Emphasis Type="Italic">Lavandula angustifolia</Emphasis> Miller)

In this study, microwave assisted a hydrodistillation process (MWHD) of essential oils from lavender (Lavandula angustifolia Miller) was investigated. In order to examine any potential differences in essential oil extraction, the lavender flowers underwent enzymatic pretreatment.A 2³ factorial design of experiments, combined with statistical methods of data analysis were used to optimize enzymatic pretreatment and to evaluate the influence of major variables (enzyme concentration, temperature and pH) on the performance of the microwave assisted extraction.Under optimal conditions, an extraction yield of 24 mg oil g^?1 substrate was achieved (an increase by approximately 25% in comparison with the classic extraction conditions of conventional hydrodistillation).The main compounds of the essential oils obtained were analyzed and identified by gas chromatography coupled to mass spectrometry (GC-MS). Analyzing the data obtained indicated that the content of main compounds (linalool and linalyl acetate ? 73%) was greater than that obtained by conventional extraction (67%).

Open image in new window

     

Chemical composition,cytotoxicity, antimicrobial and antifungal activity of several essential oils

Essential oils (EOs) are known and used for their biological, antibacterial, antifungal and antioxidant properties. Numerous studies have shown that EOs exhibit a large spectrum of biological activities in vitro. The incidence of drug-resistant pathogens and the toxicity of antibiotics have drawn attention to the antimicrobial activity of natural products, encouraging the development of alternative treatments. The aim of this study was to analyse the phytochemical and the cytotoxic characteristic of 36 EOs; we then evaluated the antimicrobial activity of the less-toxic EOs on Gram-positive, Gram-negative and fungi strains. The results showed low cytotoxicity in seven EOs and good activity against Gram-negative and Candida spp. strains. Based on our results, EOs could be proposed as a novel group of therapeutic agents. Further experiments are necessary to confirm their pharmacological effectiveness, and to determine potential toxic effects and the mechanism of their activity in in vivo models.     

Analgesic-like activity of essential oils constituents

Research on neuroactive drugs is a pharmaceutical sector of high interest and growth. The discovery of efficient drugs that can relieve pain is a subject of research in the pharmaceutical industry and academic field because pain is a symptom of many diseases. This review will summarize results on the discovery of essential oil constituents with analgesic-like activity from the chemical and pharmacological perspectives. Overall, 43 bioactive compounds were selected in nociception models. Among them, 62.8% were monoterpenes, 18.6% sesquiterpenes and other constituents represented 18.6%. The data show the potential of this group of natural product chemicals as analgesic drugs that may be useful for therapeutic purposes.     

Advanced analytical techniques for the extraction and characterization of plant‐derived essential oils by gas chromatography with mass spectrometry

In recent years, essential oils have received a growing interest because of the positive health effects of their novel characteristics such as antibacterial, antifungal, and antioxidant activities. For the extraction of plant‐derived essential oils, there is the need of advanced analytical techniques and innovative methodologies. An exhaustive study of hydrodistillation, supercritical fluid extraction, ultrasound‐ and microwave‐assisted extraction, solid‐phase microextraction, pressurized liquid extraction, pressurized hot water extraction, liquid–liquid extraction, liquid‐phase microextraction, matrix solid‐phase dispersion, and gas chromatography (one‐ and two‐dimensional) hyphenated with mass spectrometry for the extraction through various plant species and analysis of essential oils has been provided in this review. Essential oils are composed of mainly terpenes and terpenoids with low‐molecular‐weight aromatic and aliphatic constituents that are particularly important for public health.