脉冲激光沉积法制备高温压电薄膜0.20 BiInO$lt;sub$gt;3$lt;/sub$gt;-0.80PbTiO$lt;sub$gt;3$lt;/sub$gt;$lt;strong$gt;$lt;font color="#ff0000"$gt;$lt;font color="#ff0000"$gt;（已撤稿）$lt;/font$gt;$lt;/font$gt;$lt;/strong$gt;

采用脉冲激光沉积法制备了0.20BiInO₃-0.80PbTiO₃（20BI-PT）高温压电薄膜,并与0.15BiInO₃-0.85PbTiO₃（15BI-PT）样品进行了比较研究. X射线衍射谱显示,20BI-PT样品100峰出现了明显的劈裂,显示样品具有更高的四方对称性. FESEM图显示,20BI-PT样品中出现了部分111取向的三角形晶粒. 20BI-PT样品的铁电剩余极化（P_r）为～28 μC/cm²,矫顽场（E_c）为～120 kV/cm,相较15BI-PT样品,P_r略有增加,但同时E_c也有增加. 20BI-PT样品的横向压电系数（e_31,f）约为–4.7±0.6 C/m²,和15BI-PT相比几乎一样. 介电温度谱显示,20BI-PT 样品的居里温度比15BI-PT增加了约30 ℃,达590 ℃,且介电峰没有明显的频率依赖性. Rayleigh分析显示,20BI-PT样品中内在本征因素及可翻转畴对介电非线性的贡献和15BI-PT基本相同,但是外在因素的贡献没有15BI-PT的贡献大,这可能和20BI-PT样品中晶粒111相对取向率较高有关. 关键词： 薄膜 脉冲激光沉积 铁电 压电     

衬底温度对ZnO薄膜的结构和光学特性的影响

利用等离子体辅助分子束外延(P-MBE)设备在蓝宝石衬底上通过改变生长温度,制备了不同的ZnO样品.研究了衬底温度对ZnO的结构、光学和电学性质的影响.样品的晶体结构利用X射线衍射谱进行表征.X射线衍射谱表明,所有的ZnO样品都是(002)取向的六角纤锌矿结构.随着生长温度的升高,X射线的(002)衍射峰的半峰全宽逐渐...     

Infrared spectroscopic ellipsometry of (Pb, La)(Zr, Ti)O3 thin films on platinized silicon

Lead lanthanum zirconate titanate (PLZT) thin films with different La concentrations (x), whose composition is x/40/60, have been grown directly on Pt/Ti/SiO₂/Si (100) substrates by a modified sol-gel method. X-ray diffraction analysis shows that the PLZT thin films are polycrystalline. The infrared optical properties of the PLZT thin films have been investigated using the infrared spectroscopic ellipsometry in the spectral range of 2.5–12.5 μm. By fitting the measured ellipsometric spectra (Ψ and Δ) with a three-phase model (air/PLZT/Pt), and a derived classical dispersion relation for the thin films, the optical constants and thicknesses of the thin films have been obtained. The refractive index of the PLZT thin films decreases with increasing La concentrations, however, the extinction coefficient increases with increasing La concentrations except for the PLZT(4/40/60) thin films. The values of the effective static charge calculated for the PLZT thin films, which state that PLZT belongs to a mixed ionic-covalent compound, decrease with increasing La concentrations. Moreover, the refractive index at the wavelength of 2.5 μm changes linearly with the effective static charge. The plot of the calculated infrared optical absorption versus wavelength for the Ni/PLZT/Pt multilayer structures with various La concentrations is given and indicates that the PLZT thin films are excellent candidates for ferroelectric infrared detectors and focal plane arrays.     

Y2O3稳定ZrO2薄膜的结构和光学特性

用电子束蒸发法制备出四种不同Y2O3含量的Y2O3稳定ZrO2（YSZ）薄膜,用X射线衍射和透射光谱测定薄膜的结构和光学性能.结果表明：随着Y2O3含量的增加,ZrO2薄膜从单斜相向高温相（四方相和立方相）转变,获得了结构稳定的YSZ薄膜;YSZ薄膜的晶粒尺寸都比ZrO2薄膜的大,但随着Y2O3加入量的增加,晶粒尺寸有减小的趋势,薄膜表面也趋向光滑平整.所有YSZ薄膜的透射谱线都与ZrO2薄膜相似,在可见光和红外光区都有较高的透过率.Y2O3的加入还可以改变薄膜的折射率,在一定范围内可得到所需的任意折射率.     

SrTiO3(110) thin films grown directly on different oriented silicon substrates

We have grown (110)-oriented SrTiO₃ (STO) thin films on silicon without any buffer layer, by means of pulsed laser deposition technique. The crystal structures of the grown films were examined by X-ray diffraction analysis including θ–2θ scan and rocking curve as well as Laue diffraction methods. STO films with single (110) out-of-plane orientation were formed on all (100), (110) and (111)-oriented Si substrates. The in-plane alignments for the epitaxial STO films grown directly on Si (100) were found as STO[001]//Si[001] and STO[11̄0]//Si[010]. The results should be of interest for better understanding of the growth of perovskite oxide thin films on silicon wafers. PACS 77.55.+f; 68.55.JK; 81.15Fg     

Fabrication and characteristics of a surface acoustic wave UV sensor based on ZnO thin films grown on a polycrystalline 3C-SiC buffer layer

Zinc oxide (ZnO) thin films were deposited onto a polycrystalline (poly) 3C-SiC buffer layer for surface acoustic wave (SAW) ultraviolet (UV) sensing using a magnetron sputtering system. X-ray diffraction (XRD) and photoluminescence (PL) spectra showed that the ZnO film grown on 3C-SiC/Si had a dominant c-axis orientation, a lower residual stress, and higher intensity of luminescence at 380 nm of ZnO thin film. The SAW resonator UV detector were fabricated on ZnO/Si structures with a 3C-SiC buffer layer. The SAW resonator exposed under UV illumination had a linear response with sensitivity of 85 Hz/(μW/cm²) in ZnO/3C-SiC/Si structures, as compared to 25 Hz/(μW/cm²) in ZnO/Si structures with UV intensity varied until 600 μW/cm².     

衬底对原位氧化制备的ZnO薄膜结构和光学性质的影响

 采用射频反应溅射法在不同衬底上制备Zn₃N₂薄膜,然后对其原位氧化制备ZnO薄膜。利用X射线衍射分析(XRD)、扫描电子显微镜(SEM)和光致发光谱(PL)等表征技术研究了不同衬底对ZnO薄膜的结晶特性和发光性能的影响。XRD研究结果显示:Zn₃N₂薄膜在500 ℃原位氧化3 h后完全转变为ZnO薄膜,在玻璃和熔融石英衬底上制备的多晶ZnO薄膜无择优取向,而单晶硅（100）衬底上的多晶ZnO薄膜具有较好的沿（002）方向的择优取向。PL测试结果显示:硅和熔融石英衬底上的多晶ZnO薄膜发光性能良好,激子复合产生的紫外发光峰很强,且半高宽较窄,而来自于深能级发射的绿色发光峰很弱;而玻璃衬底上的多晶ZnO薄膜发光性能较差。     

Effects of BaTiO_3 and SrTiO_3 as the buffer layers of epitaxial BiFeO_3 thin films

BiFeO_3 (BFO) thin films with BaTiO_3 (BTO) or SrTiO_3 (STO) as buffer layer were epitaxially grown on SrRuO_3-covered SrTiO_3 substrates. X-ray diffraction measurements show that the BTO buffer causes tensile strain in the BFO films, whereas the STO buffer causes compressive strain. Different ferroelectric domain structures caused by these two strain statuses are revealed by piezoelectric force microscopy. Electrical and magnetical measurements show that the tensile-strained BFO/BTO samples have reduced leakage current and large ferroelectric polarization and magnetization, compared with compressively strained BFO/STO. These results demonstrate that the electrical and magnetical properties of BFO thin films can be artificially modified by using a buffer layer.     

纳米Cu3N薄膜的制备与性能

采用柱状靶多弧直流磁控溅射法，100℃基底温度下在玻璃衬底上制备了纳米氮化铜(Cu3₃N)薄膜.用x射线衍射研究了不同氮气分压对Cu3₃N薄膜晶体结构 及晶粒尺寸的影响.结果显 示薄膜由Cu3₃N和Cu的纳米微晶复合而成，其中Cu3₃N纳米微晶具有 立方反ReO3₃结构.通 过原子力显微镜对薄膜表征显示，膜表面比较光滑，具有较低的粗糙度.x射线光电子能谱对 薄膜表面的成分分析表明，Cu3 _{关键词： 氮化铜薄膜 多弧直流磁控溅射 3}结构')" href="#">立方反ReO3₃结构     

The Influence of the Substrate Material on the Structure and Electrophysical Properties of Ba<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript>1 – <Emphasis Type="Italic">x</Emphasis></Subscript>TiO<Subscript>3</Subscript> Thin Films

The high-frequency spraying method has been used to produce Ba _x Sr_1–xTiO₃ thin films on (111)Pt/(100)Si and SiOx/(100)Si substrates. The synthesized films have proven to be single-phase with a polycrystalline structure. In this paper, we show the influence of the platinum sublayer on such parameters as roughness, mean size of grains, and the local polarization of Ba _x Sr_1–xTiO₃ thin films. Possible mechanisms of the obtained results related to the intragrain conductivity and the nature of interaction of a ferroelectric film with its substrate are discussed.     

Structure Stability of LaAlO3 Thin Films on Si Substrates

A series of amorphous and single-crystalline LaAlO3 （LAO） thin films are fabricated by laser molecular-beam epitaxy technique on Si substrates under various conditions of deposition. The structure stability of the LAO films annealed in high temperature and various ambients is studied by x-ray diffraction as well as high-resolution transmission electron microscopy. The results show that the epitaxial LAO films have very good stability, and the structures of amorphous LAO thin films depend strongly on the conditions of deposition and post-annealing. The results reveal that the formation of LAO composition during the deposition is very important for the structure stability of LAO thin films.     

Hall mobility and characteristics of gas-phase polymerized poly(3-iodothiophene) thin films

The semi-conductive poly(3-iodothiophene)(P3IT) films were fabricated by gas-phase polymerization through a chemical vapor deposition process. The P3IT nanoscale films have a high crystalline morphologies, and possessed a high Hall mobility up to 10 cm²/Vs. The degree of crystalline and the mobility values measured through Scanning Electron Microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy with structural analysis. These conductive thin films, possessing polycrystalline structures, have a very high mobility and are capable of being applied to organic electronic layers for electrical devices such as the thin film transistors and organic photovoltaic cells.     

Influences of Y2O3 dopant content on residual stress,structure, and optical properties of ZrO2 thin films

Four kinds of Y2O3 stabilized ZrO2 （YSZ） thin films with different Y2O3 contents （from 0 to 12 mol%） are deposited on BK7 glass substrates by electron-beam evaporation method. The effects of different Y2O3 dopant contents on residual stress, structure, and optical properties of ZrO2 thin films are investigated. The results show that residual stress in YSZ thin films varies from tensile to compressive with the increase of Y2O3 molar content. The addition of Y2O3 is beneficial to the crystallization of YSZ thin film and transformation from amorphous to high temperature phase, and the refractive index decreases with the increase of Y2O3 molar content. Moreover, the variations of residual stress and the shifts of refractive index correspond to the evolution of structures induced by the addition of Y2O3.     

Thermo-Sensitive Ba0.64Sr0.36TiO3 Thin Film Capacitors for Dielectric Type Uncooled Infrared Sensors

Ba_0.64Sr_0.36TiO₃ (BST) thin films are prepared on Pt/Ti/SiO₂/Si₃N₄/SiO₂/Si substrates by a sol-gel method. Thermo-sensitive BST thin film capacitors with a Metal-Ferroelectrics-Metal (M-F(BST)-M) structure are fabricated as the active elements of dielectric type uncooled infrared sensors. XRD are employed to analyze the crystallographic structures of the films. AFM observations reveal a smooth and dense surface of the films with an average grain size of about 35 nm. Rapid temperature annealing (RTA) process is a very efficient way to improve crystallization quality. The preferable annealing temperature is 800°C for 1 min. The butterfly shaped C-V curves of the capacitors indicate the films have a ferroelectric nature. The dielectric constant and dielectric loss of the films at 100 kHz are 450 and 0.038, respectively. At 25°C, where the thermo-sensitive capacitors work, the temperature coefficient of dielectric constant (TCD) is about 5.9 %/°C. These results indicate that the capacitors with sol-gel derived BST thin films are promising to develop dielectric type uncooled infrared sensors.     

不同晶向SrTiO3上外延GaAs薄膜的光谱研究

利用MBE生长技术,成功地在不同晶向SrTiO3(100)(111)(110)衬底上生长了GaAs薄膜,利用显微Raman和荧光光谱（PL）对此进行了研究。实验结果表明,在不同晶向SrTiO3上生长的GaAs薄膜有不同的晶向和应力状态。荧光光谱（PL）研究表明在SrTiO3(100)(111)晶面上生长的GaAs薄膜的PL峰发生明显的蓝移。研究表明在SrTiO3(110)面上生长的GaAs薄膜和体单晶基本上一致,有更好的光学质量。     

Pulsed laser deposition of (110) oriented semiconductive SrFeO3−x thin films

 The semiconductive perovskite-type oxide SrFeO_3-x (x<0.16) (SFO) thin films have been directly fabricated on (001)SrTiO₃ and (001)LaAlO₃ single crystal substrates by pulsed laser deposition(PLD) under high oxygen partial pressure of 100 Pa. The SFO thin films were (110) oriented. The x-ray photoelectron spectroscopy (XPS) analysis showed that the surface of SFO thin film has strong gas absorption capability. The resistance versus temperature has been measured in the temperature range from 77 K to 300 K. The SFO thin film showed typical semiconductive property. Dependence of resistance of SFO thin film on oxygen pressure was measured and result showed that the SFO thin film had better oxygen sensitive property. Received: 14 May 1996/Accepted: 15 August 1996     

C3N4薄膜的结构与性能研究

用射频等离子体增强化学汽相沉积技术合成C₃N₄薄膜，并采用强迫晶化技术，经透射电子衍射观测，薄膜具有多晶结构．用X射线光电子能谱测试了C，N原子结合能及含氮量．傅里叶变换红外光谱曲线表明薄膜中不含石墨相．测得薄膜的维氏硬度为29.2—50.0GPa 关键词：     

SUPERCONDUCTING PROPERTIES AND STRUCTURAL PERFECTION OF EPITAXIAL YBa2Cu3O7-x THIN FILMS

High quality epitaxial YBa₂Cu₃O_7-x thin films have been succcessfully prepared by dc magnetron sputtering deposition, on (100) and (110) aligned SrTiO₃, LaAlO₃ and yttria-stabilized zirconia (YSZ) substrates. The films showed zero resistance around 90 K and had a J_c (at 77 K, H=0) over 10⁶A/cm². It was found that superconducting properties and structures of the films were strongly dependent on oxygen pressure and substrate temperature. The epitaxial structure of the films have been studied by X-ray diffraction. Rutherford backscattering and channeling spectroscopy, X-ray double-crystal diffraction and transmission election microscopy. The experimental results demonstrated that the epitaxial YBa₂Cu₃O_7-x films had excellent superconducting properties and quite perfect structure.     

高质量镍基超晶格薄膜的制备及表征

自发现镍基超导薄膜之后, 镍基材料体系已成为当前人们的研究热点. 而在相关报道中, 普遍认为高质量的镍基超导前驱体薄膜的制备对其拓扑还原后超导电性的实现具有重要影响. 前期研究表明高质量的前驱体薄膜只生长在SrTiO3 衬底附近, 这与我们的实验结果一致. 为了可控制备高质量的镍基超导前驱体薄膜, 本文利用脉冲激光沉积(PLD) 技术在SrTiO3 (001) 衬底上生长不同厚度的可层选择性还原的[SrTiO3 ]m/[ Nd0 .8Sr0 .2 NiO3 ]n[(STO)m/(NSNO)n ]超晶格薄膜. 采用反射高能电子衍射仪(RHEED) 及透射电子显微镜(STEM) 和 X 射线衍射(XRD) 技术对超晶格薄膜的结构进行原位检测及结构表征, 然后利用综合物性测量系统(PPMS) 测试薄膜的电磁输运性质. 结果表明, 超晶格薄膜的结构质量良好, 超晶格薄膜和高质量单层前驱体薄膜表现出类似的电阻和磁阻现象. 该研究为后续镍基超导薄膜的可重复制备提供了重要的参考.     

Co:BaTiO3纳米复合薄膜的制备及其结构

用脉冲激光沉积技术(PLD)在MgO(100)基底上生长了嵌埋Co纳米晶的BaTiO3复合薄膜. 分别利用x射线衍射(XRD)、原子力显微镜(AFM)以及拉曼光谱(Raman)对薄膜的微观结构、表面 形貌进行了表征. 结果表明该薄膜为c轴取向的四方晶体结构，薄膜表面均匀、致密、 具有原子尺度的光滑性，其均方根表面粗糙度(RMS)达到015nmCo以纳米晶形式嵌埋BaTi O3基体中，呈单分散性均匀分布，其粒径随激光脉冲数的增加而增大. Co：BaTiO3纳米 复合薄膜拉曼峰的强度随钴纳米晶粒径的增加明显减弱，但是峰的宽度逐渐增加. 关键词： Co：BaTiO3 纳米复合薄膜 脉冲激光沉积