二十碳四烯酸甲酯标准样品的研制

依据GB/T 15000.3–2008工作导则,研制二十碳四烯酸甲酯标准样品。以二十碳四烯酸油粗品为原料,制备高纯二十碳四烯酸甲酯样品,通过红外、质谱、核磁等方法对二十碳四烯酸甲酯样品进行结构鉴定,并进行均匀性、稳定性检验。采用8家实验室进行联合定值,对定值结果进行数据分析。二十碳四烯酸甲酯标准样品均匀性和稳定性良好,其定值结果为99.28%,相对扩展不确定度为0.14%(k=2)。所制得的二十碳四烯酸甲酯样品满足标准样品工作导则的要求,可用于有关二十碳四烯酸甲酯的检测以及相关产品的质量控制。     

碳素钢氧氮气体标准样品的研制

依据《标准样品工作导则》(GB/T 15000.1~15000.5-1994)和《冶金产品分析用标准样品技术规范》(YB/T 082-1996)研制了3个水平含量的碳素钢氧氮气体标准样品,对其均匀性、稳定性检验后进行定值,定值结果分别为氧:0.002 2%、0.008 8%、0.011 5%;氮:0.007 00%、0.003 20%、0.002 5%。定值水平与国内外同类样品相当。     

异补骨脂素标准样品的研制

依据GB/T 15000.3-2008标准样品的工作导则,研制异补骨脂素标样样品。采用豆科植物补骨脂Psoralea corylifolia L.的干燥成熟果实为原料,高速逆流色谱法分离制备异补骨脂素单体,通过紫外光谱、红外光谱、质谱和核磁共振等技术进行结构表征,同时进行了薄层色谱鉴别和热重分析,建立了HPLC检测分析方法。异补骨脂素样品进行了均匀性检验、稳定性检验和8家实验室联合定值。结果表明,该样品均匀性良好,在0~4℃储存条件下48个月稳定性良好,定值结果确定其标准值为99.83%,置信度95%的不确定度为0.22%。     

姜黄素标准样品的研制

采用硅胶柱色谱和重结晶的方法制备姜黄素标准样品,用UV,IR,MS和NMR等方法对姜黄素标准样品进行结构鉴定,并进行了均匀性、稳定性检验。采用国内8家具有分析资质的实验室进行协同定值,并对定值结果的不确定度进行了评定。姜黄素标准样品的定值结果为99.78%,置信度95%的扩展不确定度(k=2)为0.13%。该姜黄素标准样品可用于有关姜黄素检测方法的校正和相关产品的质量控制。     

4,9-脱水河豚毒素国家标准样品的研制

研制4,9-脱水河豚毒素国家标准样品。以河豚鱼卵巢为原料,提取制备4,9-脱水河豚毒素,采用红外光谱(IR)、高分辨质谱和核磁共振谱(NMR)进行结构确证。样品分装成140瓶后,采用柱后衍生–高效液相荧光法进行均匀性、稳定性检验和定值分析。从样品中随机抽取15瓶进行均匀性检验,经F检验表明在95%的置信区间范围内样品均匀性良好;稳定性考察按照40℃加速试验稳定性(6个月)进行,结果表明在考察期间内样品稳定性良好;标准样品经国内8家具有分析资质的实验室进行协同定值,并评定了定值结果的不确定度,4,9-脱水河豚毒素标准样品定值结果为97.77%,相对扩展不确定度为0.4%(k=1.96)。该标准样品达到国家标准样品的技术要求,可用于有关脱水河豚毒素的方法校正和质量控制。     

岩藻黄质标准样品的研制

研制了岩藻黄质标准样品。以海带为原料,通过提取、分离纯化制备高纯岩藻黄质,采用红外光谱(IR)、高分辨质谱(MS)和核磁共振谱(NMR)进行结构确证。样品分装成150瓶样品后,采用高效液相色谱–紫外检测法进行均匀性、稳定性检验和定值分析。从样品中随机抽取15瓶进行均匀性检验,经F检验表明在95%的置信区间范围内样品均匀性良好;在–18℃条件下,进行24个月长期稳定性考察,结果表明样品在24个月内稳定性良好;标准样品经国内8家具有分析资质的实验室进行协同定值,并评定了定值结果的不确定度,岩藻黄质标准样品定值结果为99.53%,相对扩展不确定度为0.22%(k=1.96)。该标准样品达到标准样品的技术要求,可用于有关岩藻黄质相关产品的方法校正和质量控制。     

海藻糖标准样品的研制

研制了海藻糖国家标准样品。以食品级海藻糖粗品为原料,纯化制备海藻糖,采用红外光谱(IR)、质谱和核磁共振谱(NMR)以及单晶衍射等方法进行结构确证。样品分装成400瓶后,采用离子色谱法进行均匀性、稳定性检验和定值分析。从样品中随机抽取15瓶进行均匀性检验,经F检验表明,在95%的置信区间范围内,样品均匀性良好。在40℃下,经过24个月稳定性考察,结果表明样品稳定性良好。标准样品经国内8家具有分析资质的实验室进行协同定值,并评定了定值结果的不确定度,海藻糖标准样品定值结果为99.72%,扩展不确定度为0.26%(k=1.96)。该标准样品达到国家标准样品的技术要求,可用于有关海藻糖的方法校正和质量控制。     

章鱼肉碱标准样品的研制

研制了章鱼肉碱标准样品。以章鱼加工副产物为原料,通过提取、分离纯化制备高纯章鱼肉碱,采用红外光谱(IR)、高分辨质谱(MS)和核磁共振谱(NMR)进行结构确证。样品分装成144瓶,采用离子色谱检测法进行均匀性、稳定性检验和定值分析。从样品中随机抽取15瓶进行均匀性检验,经F检验表明:在95%的置信区间内样品均匀性良好。在0~4℃条件下,经过24个月长期试验稳定性考察,结果表明样品稳定性良好。标准样品经国内8家具有分析资质的实验室进行协同定值,章鱼肉碱标准样品定值结果为99.49%,相对扩展不确定度为0.14%(k=1.96)。该标准样品达到标准样品的技术要求,可用于章鱼肉碱相关产品的质量控制和分析方法校正。     

蜂王浆冻干粉中甲硝唑残留标准样品制备的研究

建立了蜂王浆冻干粉中甲硝唑残留标准样品的研制和定值方法。对日常检测阳性样品进行匀浆、冷冻干燥和均匀化加工处理,真空包装,得到1批400袋蜂王浆冻干粉样本。F检验法和t检验法表明在95%置信区间内,样本均匀性、短期稳定性和长期稳定性均达到标准样品要求。制备的甲硝唑标准样品采用液相色谱-串联质谱法,与国内外8家实验室进行协同定值。采用格拉布斯和柯克伦检验对定值结果进行异常值检验,并对结果进行不确定度评估。     

河豚毒素标准样品的研制

采用质谱、核磁、红外及紫外对河豚毒素样品进行结构确证,采用柱后衍生高效液相荧光法对该纯度标准样品进行定值并进行了均匀性、稳定性检验。标准样品经国内6个具有分析资质的实验室进行协同定值,定值结果为99.45%,其扩展不确定度(95%置信区间)为0.51%。该标准样品达到国家标准样品的技术要求,可用于有关河豚毒素的方法校正和质量控制。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.