High-pressure-promoted Fmoc-aminoacylation of N-ethylcysteine: preparation of key devices for the solid-phase synthesis of peptide thioesters

In this study synthesis of Fmoc-aminoacyl-N-ethyl-S-triphenylmethylcysteine, a new N→S acyl migratory device for the preparation of peptide thioesters by Fmoc solid-phase peptide synthesis (SPPS) is described. Condensation of Fmoc-aminoacyl fluoride and N-ethyl-S-triphenylmethylcysteine allyl ester, readily prepared from known S-triphenylmethylcysteine allyl ester, was efficiently promoted in CH₂Cl₂ under high-pressure (800 MPa). When the reaction was performed with the additive DIEA, considerable epimerization at the chiral centers occurred, affording a mixture of diastereomers. When the preparation procedure for N-ethyl-S-triphenylmethylcysteine allyl ester was changed and the additive DIEA in the high-pressure reaction was excluded, Fmoc-aminoacyl-N-ethyl-S-triphenylmethylcysteines was obtained as a single stereoisomer without epimerization. The Fmoc-l-leucine adduct thus prepared was deallylated and used for the SPPS of a known decapeptide. A remarkable increase (44%) in the overall yield of the decapeptidethioester was achieved, compared to the 7% obtained by the stepwise on-resin Leu-Cys condensation method.     

Facile, fmoc-compatible solid-phase synthesis of peptide C-terminal thioesters

A short route to peptide C-terminal thioesters was developed that does not require the use of special linkers or resins and is compatible with standard Fmoc chemistry. Following conventional solid-phase peptide synthesis, an excess of Me(2)AlCl and EtSH in dichloromethane cleaves peptides from Wang or Pam resins to give the corresponding thioesters directly in good yield and purity.     

Fmoc synthesis of peptide thioesters without post-chain-assembly manipulation

An operationally simple method for the synthesis of peptide thioesters is developed using standard Fmoc solid-phase peptide synthesis procedures. The method relies on the use of a premade enamide-containing amino acid which, in the final TFA cleavage step, renders the desired thioester functionality through an irreversible intramolecular N-to-S acyl transfer.     

Solid-phase synthesis of peptide thioacids through hydrothiolysis of resin-bound peptide thioesters

We report that solid-phase hydrothiolysis is an efficient method to convert resin-bound peptide thioesters to thioacids in aqueous buffer by using a total PEG-based resin. Also demonstrated is the use of the so-prepared peptide thioacids in chemoselective amide bond formation reactions.     

Cysteine-derived s-protected oxazolidinones: potential chemical devices for the preparation of peptide thioesters

[reaction: see text]. An N-S acyl-transfer-mediated preparation of peptide thioesters using the S-protected oxazolidinone derived from cysteine has been developed and applied to the synthesis of a 32-mer biologically active peptide by native chemical ligation protocols.     

Fmoc solid-phase synthesis of peptide thioesters using an intramolecularn,S-acyl shift

[reaction: see text] We describe the Fmoc solid-phase synthesis of peptide thioesters based on the alkylation of the safety-catch sulfonamide linker with a protected 2-mercaptoethanol derivative. The thioester is generated on the solid phase after the peptide chain assembly as a consequence of an intramolecular N,S-acyl shift. Depending on the stability of the spacer separating the sulfonamide linker from the resin toward TFA, treatment of the peptidyl resin with TFA led to a soluble or supported deprotected thioester.     

Fmoc-based synthesis of peptide thioesters for native chemical ligation employing a tert-butyl thiol linker

tert-Butyl thioesters display an astonishing stability toward secondary amines in basic milieu, in contrast to other alkyl and aryl thioesters. Exploiting this enhanced stability, peptide thioesters were synthesized in a direct manner, applying a tert-butyl thiol linker for Fmoc-based solid-phase peptide synthesis.     

Solid-phase synthesis of peptide and glycopeptide thioesters through side-chain-anchoring strategies

An efficient new strategy for the synthesis of peptide and glycopeptide thioesters is described. The method relies on the side-chain immobilization of a variety of Fmoc-amino acids, protected at their C-termini, on solid supports. Once anchored, peptides were constructed using solid-phase peptide synthesis according to the Fmoc protocol. After unmasking the C-terminal carboxylate, either thiols or amino acid thioesters were coupled to afford, after cleavage, peptide and glycopeptide thioesters in high yields. Using this method a significant proportion of the proteinogenic amino acids could be incorporated as C-terminal amino acid residues, therefore providing access to a large number of potential targets that can serve as acyl donors in subsequent ligation reactions. The utility of this methodology was exemplified in the synthesis of a 28 amino acid glycopeptide thioester, which was further elaborated to an N-terminal fragment of the glycoprotein erythropoietin (EPO) by native chemical ligation.     

Transfer allyl esters to thioesters in solid phase condition: synthesis of peptide thioesters by Fmoc chemistry

A method to transfer allyl esters to thioesters under a solid phase condition has been developed to synthesize peptide thioesters. A Fmoc chemistry has been applied to synthesize the peptide allyl esters, which are selectively transferred to the expected peptide thioesters under solid phase synthesis conditions successfully.     

Fmoc solid-phase synthesis of peptide thioesters by masking as trithioortho esters

[reaction: see text] Total chemical synthesis of proteins by chemoselective ligation relies on C-terminal peptide thioesters as building blocks. Their preparation by standard Fmoc solid-phase peptide synthesis is made difficult by the lability of thioesters to aminolysis by the secondary amines used for removal of the Fmoc group. Here we present a novel backbone amide linker (BAL) strategy for their synthesis in which the thioester functionality is masked as a trithioortho ester throughout the synthesis.     

Efficient preparation of nitrosoarenes for the synthesis of azobenzenes

[reaction: see text] Reaction conditions are described for the oxidation of anilines furnishing nitrosoarenes and the synthesis of unsymmetrically substituted azobenzenes. In a comparative study, the catalytic oxidation of methyl 4-aminobenzoate by hydrogen peroxide was investigated, and SeO(2) proved to be superior or equal to methyl trioxorhenium (MTO) and Na(2)WO(4), respectively. Nevertheless, the application of the inexpensive, environmentally friendly, Oxone in a biphasic system proved to be more efficient, and a variety of useful nitrosoarenes for the synthesis of azo compounds were prepared in high yield and purity on a large scale.     

Selective preparation of key intermediates for the synthesis of key intermediates for the synthesis of gemini surfactants by phase-transfer catalysis

A comparison of liquid-liquid and solid-liquid PTC for the selective synthesis of diglycidyl ether from protected pentaerythritol and epichlorohydrin is presented. Solid-liquid PTC was found to be more useful than liquid-liquid PTC because the use of water or other solvents can be avoided and higher yields and selectivity are achieved. It was proved that etherification takes place in the solid phase-organic phase system even in the absence of the phase-transfer catalyst. However, the use of tetrabutylammonium bisulfate as catalyst is essential due to its crucial effect on the enhancement of the rate of etherification and on the improvement of the selectivity to diglycidyl ether, which is higher than 98%.     

Efficient synthesis of a side-chain extended diaminodiacid for solid-phase synthesis of peptide disulfide bond mimics

Solid-phase incorporation of diaminodiacids is one of the most effective approaches for synthesis of peptide disulfide bond mimics. One of a limitation of current diaminodiacid toolbox is that only four-atom linkage mimics are available that may not fully meet the activity optimization requirement. In this work, we developed a new diaminodiacid that contains a five-atom thioether (C–C–S–C–C) bridge for the first time. With this diaminodiacid in hand, we successfully obtained oxytocin containing new disulfide bond mimic by solid phase peptide synthesis.     

Tandem thiol switch synthesis of peptide thioesters via N-S acyl shift on thiazolidine

An efficient "thiol switch" approach for the synthesis of peptide thioesters via an acid-catalyzed N-S acyl shift and a thioester exchange reaction in tandem with concurrent removal of protecting groups is described. This method employs novel 2-(thiomethyl)thiazolidine (TMT)-anchored resins and is fully compatible with Fmoc chemistry.     

Improved synthesis of key fragments for the preparation of natural product incednine

A shorter and more efficient synthesis of three key fragments that have been previously described for the preparation of the polyenic macrolactam aglycon of natural product incednine isolated from Actinomyces sp. has been developed. These fragments have been prepared with higher levels of selectivity when compared to the already published procedure.     

Synthesis of phosphonocinnamic thioesters, substrate analogues of cinnamoyl-CoA reductase, a key enzyme in the lignification process

The one-pot transesterification of diethylarylvinylphosphonates with N-acetylcysteamine has been achieved using phosphonochloridates as intermediates. Reaction of phosphonodiesters with (COCl)₂ gave the corresponding chlorinated compounds, which were coupled with N-acetylcysteamine in presence of Et₃N.     

Improved synthesis of C-terminal peptide thioesters on "safety-catch" resins using LiBr/THF

[reaction: see text] The alkanesulfonamide "safety-catch" resin has proven useful for Fmoc-based synthesis of C-terminal peptide thioesters. We now report that the yield of isolated thioester can increase significantly when the cleavage reaction is carried out in 2 M LiBr/THF rather than DMF or THF. The largest effects are seen with problematic peptides that aggregate or form secondary structures on the resin.