Luminescent Blooming of Dendronic Carbon Nanotubes through Ion‐Pairing Interactions with an EuIII Complex

A multiwalled carbon nanotube (MWCNT) scaffold was covalently functionalized with a second‐generation polyamidoamine (PAMAM) dendron, presenting four terminal amino groups per grafted aryl moiety. These reactive functions were alkylated to obtain a positively charged polycationic dendron/carbon nanotube system ( d‐MWCNTs?Cl ), which eventually underwent anion exchange reaction with a negatively charged and highly luminescent Eu^III complex ( [EuL₄]?NEt₄ , in which L =(2‐naphtoyltrifluoroacetonate)). This process afforded the target material d‐MWCNTs?[EuL₄] , in which MWCNTs are combined with red‐emitting Eu^III centers through electrostatic interactions with the dendronic branches. Characterization of the novel MWCNT materials was accomplished by means of TGA and TEM, whereas d‐MWCNTs?Cl and d‐MWCNTs? [EuL₄] further underwent XPS, SEM and Raman analyses. These studies demonstrate the integrity of the luminescent [EuL₄]^? center in the luminescent hybrid, the massive load of the cationic binding sites, and the virtually complete anion‐exchange into the final hybrid material. The occurrence of the ion‐pairing interaction with MWCNTs was unambiguously demonstrated through DOSY NMR diffusion studies. Photophysical investigations show that MWCNTs?[EuL₄] is a highly soluble and brightly luminescent red hybrid material in which MWCNTs act as photochemically inert scaffolds with negligible UV/Vis absorption, compared with the grafted Eu complex, and with no quenching activity. The high dispersibility of MWCNTs?[EuL₄] in a polymer matrix makes it a promising luminophore for applications in material science.     

新型超分子复合发光材料四足配体铕配合物-蒙脱土的插层组装及发光性质

通过离子交换反应将四足配体铕配合物[EuL(NO3)]2+[L=1,1,1’,1’-四(吡啶-2-羧酸酯基)联三甲基丙烷]插层组装到蒙脱土(MT)层板间, 制备出一种新型的超分子复合发光材料[EuL(NO3)]2+-MT. 用元素分析、XRD、FTIR、UV-Vis和热分析对材料进行了表征, 并对其荧光性质进行了研究. 结果表明, 复合材料保持了蒙脱土良好的层柱结构特征, 其层间距d(001)值与插层配离子的直径吻合得较好, 配离子以单层形式分布于蒙脱土层板间. 在紫外光激发下, 复合材料发出较强的Eu3+特征荧光, 其相对荧光强度、荧光单色性和荧光寿命大大优于相应配合物的乙醇溶液. 复合材料中配合物的发光性能、光稳定性和热稳定性较纯配合物有明显提高.     

Nanohybrid Materials Consisting of Poly[(3‐aminobenzoic acid)‐co‐(3‐aminobenzenesulfonic acid)‐co‐aniline] and Multiwalled Carbon Nanotubes for Immobilization of Redox Active Cytochrome c

The development of a new surface architecture for the efficient direct electron transfer of positively charged redox proteins is presented. For this reason different kinds of polyaniline terpolymers consisting of aminobenzoic acid (AB), aminobenzenesulfonic acid (ABS) and aniline (A) with different monomer ratios were synthesized. The P(AB‐ABS‐A) were grafted to the surface of multiwalled carbon nanotubes (MWCNTs). FTIR measurements prove the covalent binding to the carboxylic groups of the MWCNTs while conductivity tests show an increase in the conductivity of the nanohybrid in comparison to the polymers. The [MWCNT‐P(AB‐ABS‐A)] nanohybrids were used for the immobilization of redox active cytochrome c (cyt.c). The positively charged protein can electrostatically interact with the negatively charged nanohybrid. Cyclic voltammetry (CV) shows an increase in the protein loading on [MWCNT‐P(AB‐ABS‐A)] coupled to cysteamine modified gold electrodes in comparison to non‐grafted MWCNTs. A further increase in the sulfonation degree of P(AB‐ABS‐A) leads to an enhanced current output of the modified electrodes. The redox activity of the polymer decreases after the immobilization of the cyt.c on the nanohybrid. For the first time polymers covalently grafted to the surface of MWCNTs are used in a biosensor.     

Laponite assisted dispersion of carbon nanotubes in water

The ability of Laponite to stabilize aqueous suspensions of multiwalled carbon nanotubes (MWCNTs) was investigated with the help of analytical centrifugation, microscopic image analysis, and measurements of electrical conductivity of hybrid Laponite+MWCNT suspensions. The impact of nanotube concentration C(n) (0.0025-0.5 wt%) and Laponite/MWCNTs ratio X (varied within 0-1 wt/wt) on the properties of Laponite+MWCNT hybrid suspensions was discussed. It was observed that sonication of MWCNTs at critical minimal concentration of Laponite X(c)≈0.25±0.05 resulted in efficient dispersion and formation of stabilized suspensions of individual nanotubes. The stabilization of nanotubes in the presence of Laponite was explained by adsorption of Laponite particles and formation of a hydrophilic charged shell on the surface of nanotubes. Increase of MWCNT concentration above the critical value resulted in percolation and formation of spatially extended electrically conductive networks of particles.     

Anion-induced structures and luminescent properties of chiral lanthanide-organic frameworks assembled by an achiral tripodal ligand

To confirm how different anions influence sup-ramolecular self-assembly of lanthanide-organic frameworks (LnOFs) as well as their luminescent properties, a new flexible achiral tripodal ligand, 1,1,1-tris-{[(2'-benzylaminoformyl)phenoxyl]methyl}ethane (L) and the LnOFs {[EuL(NO(3))(3)]·1.5CHCl(3)}(n) and [EuL(pic)(3)](n) have been designed and assembled. In the two LnOFs, {[EuL(NO(3))(3)]·1.5CHCl(3)}(n) demonstrates an unprecedented chiral noninterpenetrated two-dimensional (2D) honeycomblike (6,3) (hcb, Schla?fli symbol 6(3), vertex symbol 6·6·6) topological network, and [EuL(pic)(3)](n) confirms an unusual chiral LnOF with three-dimensional (3D) (10,3)-a (srs, SrSi(2), Schla?fli symbol 10(3), vertex symbol 10(2)·10(4)·10(4)) topological framework. Also the anion-induced structures and energy transfer processes in the luminescence behavior of the two LnOFs were discussed in detail.     

Carbon Nanotubes with Phthalocyanine-Decorated Surface Produced by NH3-Assisted Microwave Reaction and Their Catalytic Performance in Li/SOCl2 Battery

Multiwalled carbon nanotube (MWCNT)‐templated cobalt phthalocyanine (CoPc) assemblies are prepared by microwave reaction with the aid of NH₄Cl. The assemblies of CoPc/MWCNTs are added to the electrolyte of Li/SOCl₂ battery to show their potential application in the field of catalysis. The assemblies display a uniform coaxial nanotube structure. In the control test, the CoPc/MWCNTs synthesized without NH₄Cl exhibit the aggregation of the nanotubes of CoPc/MWCNTs. It indicates that the use of NH₄Cl as gas source is efficient in enhancing diffusion of the MWCNTs and controlling the growth of CoPc. The catalytic reduction of SOCl₂ can be carried out by CoPc molecules outside the assemblies and the MWCNTs inside the assemblies. The assemblies of CoPc/ MWCNTs exhibit excellent electrochemical catalytic activity to Li/SOCl₂ battery. The discharge energy of Li/SOCl₂ battery catalyzed by CoPc/MWCNTs is 144% higher than that of the battery without catalyst, and is 94% higher than the energy of Li/SOCl₂ battery catalyzed by bulk CoPc.     

Modular engineering of H-bonded supramolecular polymers for reversible functionalization of carbon nanotubes

A H-bond-driven, noncovalent, reversible solubilization/functionalization of multiwalled carbon nanotubes (MWCNTs) in apolar organic solvents (CHCl(3), CH(2)Cl(2), and toluene) has been accomplished through a dynamic combination of self-assembly and self-organization processes leading to the formation of supramolecular polymers, which enfold around the outer wall of the MWCNTs. To this end, a library of phenylacetylene molecular scaffolds with complementary recognition sites at their extremities has been synthesized. They exhibit triple parallel H-bonds between the NH-N-NH (DAD) functions of 2,6-di(acetylamino)pyridine and the CO-NH-CO (ADA) imidic groups of uracil derivatives. These residues are placed at 180° relative to each other (linear systems) or at 60°/120° (angular modules), in order to tune their ability of wrapping around MWCNTs. Molecular Dynamics (MD) simulations showed that the formation of the hybrid assembly MWCNT?[X?Y](n) (where X = 1a or 1b -DAD- and Y = 2, 3, or 4 -ADA-) is attributed to π-π and CH-π interactions between the graphitic walls of the carbon materials and the oligophenyleneethynylene polymer backbones along with its alkyl groups, respectively. Addition of polar or protic solvents, such as DMSO or MeOH, causes the disruption of the H-bonds with partial detachment of the polymer from the CNTs, followed by precipitation. Taking advantage of the chromophoric and luminescence properties of the molecular subunits, the solubilization/precipitation processes have been monitored by UV-vis absorption and luminescence spectroscopies. All hybrid MWCNTs-polymer materials have been also structurally characterized via thermogravimetric analysis (TGA), transmission electron microscopy (TEM), atomic force microscopy (AFM), scanning tunneling microscopy (STM), and X-ray photoelectron spectroscopy (XPS).     

Rheological and electrical properties of polypropylene/MWCNT composites prepared with MWCNT masterbatch chips

Melt compounded PP/MWCNT (polypropylene/multi-walled carbon nanotube) composites were prepared by diluting highly concentrated masterbatch chips. Maleic anhydride grafted polypropylene (PP-g-MAH) was used as a compatibilizer to promote dispersion and interaction of MWCNTs. Rheological properties were investigated with respect to the MWCNT and compatibilizer loadings, and related to morphological and electrical properties. As the MWCNT loading was increased, shear viscosity and yield stress were increased at low shear rate region because of increased interaction between MWCNT particles. When the MWCNT loading was low, MWCNT dispersion was improved by the PP-g-MAH compatibilizer because MWCNTs were wetted sufficiently due to the presence of the compatibilizer. However, rheological and electrical properties of highly concentrated MWCNT composites with the compatibilizer were not improved compared with PP/MWCNT composites without the compatibilizer because the compatibilizer did not provide sufficient wrapping of MWCNT particles. Electrical and morphological properties of PP/MWCNT composites were correlated with the rheological properties in steady and dynamic oscillatory shear flows.     

Electrostatically-driven assembly of MWCNTs with a europium complex

Luminescent carbon-based materials have been prepared by electrostatic self-assembly of negatively-charged luminescent Eu(III)-complex with imidazolium-functionalized MWCNTs.     

Intermolecular interactions of substituted benzenes on multi-walled carbon nanotubes grafted on HPLC silica microspheres and interaction study through artificial neural networks

Purified multi-walled carbon nanotubes (MWCNTs) grafted onto silica microspheres by gamma-radiation were applied as a HPLC stationary phase for investigating the intermolecular interactions between MWCNTs and substituted benzenes. The synthetic route, simple and not requiring CNTs derivatization, involved no alteration of the nanotube original morphology and physical–chemical properties. The affinity of a set of substituted benzenes for the MWCNTs was studied by correlating the capacity factor (k′) of each probe to its physico-chemical characteristics (calculated by Density Functional Theory). The correlation was found through a theoretical approach based on feedforward neural networks. This strategy was adopted because today these calculations are easily affordable for small molecules (like the analytes), and many critical parameters needed are not known. This might increase the applicability of the proposed method to other cases of study. Moreover, it was seen that the normal linear fit does not provide a good model. The interaction on the MWCNT phase was compared to that of an octadecyl (C18) reversed phase, under the same elution conditions. Results from trained neural networks indicated that the main role in the interactions between the analytes and the stationary phases is due to dipole moment, polarizability and LUMO energy. As expected for the C18 stationary phase correlation, is due to dipole moment and polarizability, while for the MWCNT stationary phase primarily to LUMO energy followed by polarizability, evidence for a specific interaction between MWCNTs and analytes. The CNT-based hybrid material proved to be not only a chromatographic phase but also a useful tool to investigate the MWCNT-molecular interactions with variously substituted benzenes.     

Electrostatic‐Assembly of Carbon Nanotubes (CNTs) and Polymer Particles in Water: a Facile Approach to Improve the Dispersion of CNTs in Thermoplastics

Summary: A facile and organic‐solvent‐free method for preparing thermoprocessable multiwalled carbon nanotube (MWCNT)‐filled thermoplastics is presented. MWCNTs are oxidized, neutralized, and then assembled with cationic soap‐free poly(methyl methacrylate) (PMMA) particles directly in water. The spontaneous electrostatic coupling between the negatively charged MWCNTs and positively charged PMMA particles, and the viscoelastic and thermomechanical behavior of the nanocomposites, are investigated. The electrostatic coupling interactions improve the dispersion of nanotubes and facilitate the formation of filler networks in the polymer matrix.

Preparation of nanocomposites of oxidized MWCNTs and positively charged PMMA particles through electrostatic assembly.     

Synthesis of polymer grafted carbon nanotubes by nitroxide mediated radical polymerization in the presence of spin-labeled carbon nanotubes

Multiwalled carbon nanotubes (MWCNT) were grafted with polystyrene by in situ nitroxide mediated radical polymerization in the presence of TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxyl) functionalized MWCNT, which was synthesized by the reaction between 4-hydroxyl-TEMPO (HO-TEMPO) and carbonyl chloride groups on the MWCNT. Although the controllability of the polymerization was not high, highly soluble grafted MWCNTs were indeed obtained, indicating that the graft polymerization was efficient. The resulting polystyrene grafted MWCNTs were easily defunctionalized at room temperature using 3-chloroperoxybenzioc acid. TEM, SEM, and TGA were employed to determine the structure, morphology, and the grafting quantities of the resulting products.     

Engineering of highly luminescent lanthanide tags suitable for protein labeling and time-resolved luminescence imaging

The synthesis of a new ligand LH(4) based on a glutamic acid skeleton bis-functionalized on its nitrogen atom by 6-methylene-6'-carboxy-2,2'-bipyridine chromophoric units is described. UV-vis spectrophotometric titrations revealed the formation of 1:1 M:L complexes with lanthanide(III) cations, and complexation of LH(4) with equimolar amounts of hydrated LnCl(3) salts (Ln = Eu, Gd, and Tb) gave water-soluble and stable complexes of the general formula [LnL(H(2)O)]Na, which were characterized by elemental analysis, IR, UV-vis absorption spectroscopy, (1)H NMR (Ln = Eu), and mass spectrometry. The conditional stability constant for formation of the [EuL(H(2)O)]Na complex was determined by competitive complexation experiments to be log K = 16.5 +/- 0.6 in 0.01 M TRIS/HCl buffer (pH = 7.0). In water solution, the [EuL(H(2)O)]Na and [TbL(H(2)O)]Na complexes were highly luminescent with quantum yields of 8% and 31%, respectively, despite the presence of ca. one water molecule in the first coordination sphere of the metal ions. Activation of the appended carboxylate function of the glutamate moiety in the form of an N-hydroxysuccinimidyl ester allows for the covalent linking of the complexes to primary amino groups of biological compounds. Bovine serum albumin (BSA) was labeled with both Eu or Tb complexes, and the Ln-BSA conjugates were characterized by UV-vis absorption and emission spectroscopy and MALDI-TOF mass spectrometry. Labeling ratios (number of complex molecules per BSA) of ca. 8:1 and 7:1 were established for Eu-BSA and Tb-BSA, respectively. The suitability of the tagged compound for use in bioanalytical time-resolved luminescence microscopy was established by comparison with fluorescein-labeled probes.     

Electrocatalytic properties of platinum nanoparticles supported on fluorine tin dioxide/multi-walled carbon nanotube composites for methanol electrooxidation in acidic medium

Fluorine tin oxide (FTO) and multi-walled carbon nanotube (MWCNT) composites synthesized by a sol-gel process followed by a hydrothermal treatment process have been explored as a support for Pt nanoparticles (Pt-FTO/MWCNTs). X-ray diffraction analysis and high resolution transmission electron microscopy show that the Pt and FTO nanoparticles with crystallite size of around 4-8 nm are highly dispersed on the surface of MWCNTs. Pt-FTO/MWCNT catalyst is evaluated in terms of the electrochemical catalytic activity for methanol electrooxidation using cyclic voltammetry, steady state polarization experiments, and electrochemical impedance spectroscopy technique in acidic medium. The Pt-FTO/MWCNT catalyst exhibits a higher intrinsic catalytic activity for methanol electrooxidation with high stability during potential cycling than Pt nanoparticles supported on tin dioxide/multi-walled carbon nanotube composites. The results suggest that FTO/MWCNT composites could be considered as an alternative support for Pt-based electrocatalysts in direct alcohol fuel cells.     

Facile Synthesis and Enhanced Nonlinear Optical Properties of Porphyrin‐Functionalized Multi‐Walled Carbon Nanotubes

Two multi‐walled carbon nanotube (MWCNT)‐based nanohybrids, MWCNT–ZnTPP and MWCNT–TPP (TPP=5‐[4‐{2‐(4‐formylphenoxy)‐ ethyloxy}phenyl]‐10,15,20‐triphenylporphyrin, ZnTPP=5‐[4‐{(4‐formylphenyl)ethynyl}phenyl]‐10,15,20‐triphenylporphinatozinc(II)), were prepared directly from pristine MWCNTs through 1,3‐dipolar cycloaddition reactions. Covalent attachment of the porphyrins to the surfaces of the MWCNTs was confirmed by Fourier transform infrared spectroscopy, ultraviolet/visible absorption, fluorescence, Raman, and X‐ray photoelectron spectroscopy, elemental analysis, transmission electron microscopy, and thermogravimetric analysis. Attachment of the porphyrin moieties to the surface of the MWCNTs significantly improves the solubility and ease of processing of these MWCNT–porphyrin composite materials. Z‐scan studies reveal that these MWCNT–porphyrin nanohybrids exhibit enhanced nonlinear optical properties under both nanosecond and picosecond laser pulses at λ=532 nm in comparison with free MWCNTs and the free porphyrin chromophores, whereas superior optical limiting performance was displayed by MWCNT–porphyrin composite materials rather than MWCNTs/ZnTPP and MWCNTs/TPP blends, which is consistent with a remarkable accumulation effect as a result of the covalent linkage between the porphyrin and the MWCNTs.     

Synthesis and field emission properties of carbon nanotube films modified with amorphous carbon nanoparticles by a simple electrodeposition method

Amorphous carbon nanoparticles （a-CNPs） on a multi-walled carbon nanotube （MWCNT） film, deposited on a silicon substrate, were synthesized using an electrodeposition combination from a methanol suspension of polydiallyldimethylammonium chloride-modified MWCNTs. A low-voltage electropho- retic deposition of the MWCNTs and a high-voltage electrochemical deposition of the a-CNPs were carried out to yield homogenously attached a-CNPs on the surfaces of the MWCNTs, and form a composite film with good adhesion to the substrate. This scalable technology can produce a large area of a-CNP/MWCNT film. And the field emission investigations show that the a-CNP/MWCNT film has turn- on electric field of 3.17 V μm- 1 （at 10 μA cm-2） and threshold field of 4.62 V μm-1 （at 1 mA cm-2）, which are lower than those of the MWCNT film. The a-CNP/MWCNT film can be deposited simply with large areas and may be a promising cathode material applied in field emission displays.     

EMI shielding and microwave absorption behavior of Au‐MWCNT/polyaniline nanocomposites

Electrically conducting Au‐multiwalled carbon nanotube/polyaniline (Au‐MWCNT/PANi) nanocomposites were synthesized by two different ways: (1) by direct mixing of MWCNT/PANi and Au nanoparticles (Au‐MWCNT/PANi‐1) and (2) by in situ polymerization of aniline in the presence of both MWCNTs and Au nanoparticles (Au‐MWCNT/PANi‐2). The higher electrical conductivity of Au‐MWCNT/PANi‐2 compared with the other samples (PANi, MWCNT/PANi, Au‐MWCNT/PANi‐1) is supported by the red shifts of the UV‐vis bands (polaron/bipolaron), the high value of the –NH+= stretch peak (Fourier transform infrared spectroscopy studies), the high % crystallinity (X‐ray diffraction analysis) and more uniform dispersion of the Au NPs in the material. The performance of the samples in electromagnetic interference (EMI) shielding and microwave absorption was studied in the X‐band (8–12 GHz). For all the samples, absorption was the dominant factor contributing toward the EMI shielding. Au‐MWCNT/PANi‐2 showed the best performance with a total shielding effectiveness of ?16 dB [averaged over the X‐band (GHz)] and a minimum reflection loss of ?56.5 dB. The higher dielectric properties resulting from the heterogeneities because of the presence of nanofillers and the high electrical conductivity lead to the increased EMI shielding and microwave absorption. The results show the significance of both Au nanoparticles and method of synthesis on the EMI shielding performance of MWCNT/PANi composites. Copyright © 2016 John Wiley & Sons, Ltd.     

Fabrication of "tadpole"-like magnetite/multiwalled carbon nanotube heterojunctions and their self-assembly under external magnetic field

Novel "tadpole"-like Fe3O4/multiwalled carbon nanotube (MWCNT) heterojunctions were successfully synthesized by position-selectively attaching Fe3O4 sphere on the tips of MWCNTs through a straightforward and effective polyol-medium solvothermal method. Transmission and scanning electron microscopy (TEM and SEM) and X-ray diffraction (XRD) investigations show these Fe3O4 spheres are constructed with tiny nanocrystallites (approximately 5 nm in average diameter), which were preferentially aggregated in an oriented pattern on the open ends of the MWCNT template. Magnetic investigation indicates this novel Fe3O4/MWCNT hybrid presents superparamagnetic behavior. The size and corresponding magnetic performance of these magnetite/MWCNT hybrids can be adjustable to some extent for specific applications through altering the reaction parameters. Furthermore, these tadpolelike nanocomposites can orient and self-assemble into one-dimensional structure under external magnetic field, displaying great potential in precise manipulation and organization of carbon nanotube-based structures into integrated functional system.     

Fabrication of silica nanotubes using silica coated multi-walled carbon nanotubes as the template

Silica nanotubes were synthesized using the multi-walled carbon nanotubes (MWCNTs) as the template material. First, we prepared silica coated MWCNT composites by surface oxidation of MWCNTs using KMnO(4) in the presence of a phase transfer catalyst and followed by grafting of 2-aminoethyl 3-aminopropyl trimethoxy silane, AEAPS. The amine groups in grafted AEAPS on MWCNTs could activate the silica shell formation by acid-base interaction. The synthesized silica was formed a uniform layer on MWCNTs with a controllable thickness and possessed sturdy 3-dimensional stability. After calcinations at 800 degrees C, the inner MWCNTs of the composite were completely decomposed and the outer silica shell layer maintained without distortion of its original shape. Finally, we could obtain the silica nanotubes having 13.0 nm of average layer thickness.     

Re(I) Complexes as Backbone Substituents and Cross-Linking Agents for Hybrid Luminescent Polysiloxanes and Silicone Rubbers

This study focuses on the synthesis of hybrid luminescent polysiloxanes and silicone rubbers grafted by organometallic rhenium(I) complexes using Cu(I)-catalyzed azido-alkyne cycloaddition (CuAAC). The design of the rhenium(I) complexes includes using a diimine ligand to create an MLCT luminescent center and the introduction of a triple C≡C bond on the periphery of the ligand environment to provide click-reaction capability. Poly(3-azidopropylmethylsiloxane-co-dimethylsiloxane) (N₃-PDMS) was synthesized for incorporation of azide function in polysiloxane chain. [Re(CO)₃(MeCN)(5-(4-ethynylphenyl)-2,2′-bipyridine)]OTf (Re1) luminescent complex was used to prepare a luminescent copolymer with N₃-PDMS (Re1-PDMS), while [Re(CO)₃Cl(5,5′-diethynyl-2,2′-bipyridine)] (Re2) was used as a luminescent cross-linking agent of N₃-PDMS to obtain luminescent silicone rubber (Re2-PDMS). The examination of photophysical properties of the hybrid polymer materials obtained show that emission profile of Re(I) moiety remains unchanged and metallocenter allows to control the creation of polysiloxane-based materials with specified properties.