Synthesis, characterization and reactivity of new complexes of titanium and zirconium containing a potential tridentate amidinato-cyclopentadienyl ligand

Group 4 metal complexes [M(eta(5)-C(5)Me(4)SiMe(2)-eta(1)-N-2R)(NMe(2))(2)] (R = pyridine, pyrazine, pyrimidine, thiazole, M = Ti; R = pyridine, thiazole; M = Zr) containing the tetramethylcyclopentadienyl-dialkylsilyl bridged amidinato as pendant ligand, were synthesized and characterized by elemental analysis, solution (1)H, (13)C and (15)N NMR spectroscopy and experimental (13)C and (15)N CPMAS in the solid state. The crystal structures of [Ti(eta(5)-C(5)Me(4)SiMe(2)-eta(1)-N-2R)(NMe(2))(2)] (R = pyridine, pyrazine, pyrimidine, thiazole) were determined by single crystal X-ray diffraction studies. All compounds exhibit a distorted tetrahedral geometry, with the ansa-monocyclopentadienyl-amido ligands acting in a bidentate mode. The [M(eta(5)-C(5)Me(4)SiMe(2)-eta(1)-N-2R)(NMe(2))(2)] (R = pyridine, thiazole; M = Zr, Ti) complexes are ethylene polymerization catalysts in the presence of MAO and they are active precursors in regioselective catalytic hydroamination operating with an anti-Markovnikov mechanism.     

Reaction of Ta(NMe2)5 with O2: formation of aminoxy and unusual (aminomethyl)amide oxo complexes and theoretical studies of the mechanistic pathways

Reaction of d0 Ta(NMe2)5 (1) with O2 yields two aminoxy complexes (Me2N)(n)Ta(eta2-ONMe2)(5-n) (n = 4, 2; 3, 3) as well as (Me2N)4Ta2[eta2-N(Me)CH2NMe2]2(mu-O)2 (4) and (Me2N)6Ta3[eta2-N(Me)CH2NMe2]2(eta2-ONMe2)(mu-O)3 (5) containing novel chelating (aminomethyl)amide-N(Me)CH2NMe2 ligands. The crystal structures of 2-5 have been determined by X-ray crystallography. (Me2N)4Ta(eta2-ONMe2) (2) converts to (Me2N)3Ta(eta2-ONMe2)2 (3) in its reaction with O2. In addition, the reaction of Ta(NMe2)5 with 3 gives 2 only at elevated temperatures. Density functional theory (DFT) calculations have been used to investigate the mechanistic pathways in the reactions of Ta(NMe2)5 (1) with triplet O2. Monomeric reaction pathways in the formation of 2-5 are proposed. A key step is the oxygen insertion into a Ta-N bond in 1 through an intersystem conversion from triplet to singlet energy surface to give an active peroxide complex (Me2N)4Ta(eta2-O-O-NMe2) (A4). The DFT studies indicate that the peroxide ligand plays an important role, including oxidizing an amide to an imine ligand through the abstraction of a hydride. Insertion of Me-N=CH2 into a Ta-amide bond yields the unusual -N(Me)CH2NMe2 ligands.     

High-spin diimine complexes of iron(II) reject binding of carbon monoxide: theoretical analysis of thermodynamic factors inhibiting or favoring spin-crossover

A new series of Fe(II) complexes, FeCl2[N(R)=C(Me)C(Me)=N(R)], containing diimine ligands with hemilabile sidearms R (R = CH2(CH2)2NMe2, 1, CH2(CH2)2OMe, 2, CH2(CH2)2SMe), 3) were synthesized. The crystal structure of 1 showed 6-coordination where both amine arms were attached, whereas 2 was a 5-coordinate 16e species with one methoxy arm dangling free. Extensive attempts were made to bind CO to these species to synthesize precursors for dihydrogen complexes but were unsuccessful. Reaction of 1 with 1 or 2 equiv of AgOTf under CO atmosphere resulted in isolation of only a 6-coordinate bis(triflate)-containing product [Fe[N(R)=C(Me)C(Me)=N(R)](OTf)2] (R = CH2(CH2)2NMe2), 5. Reaction of 5-coordinate 2 with AgSbF6 under CO did not give a CO adduct but afforded instead a dicationic dinuclear complex [Fe[N(R)=C(Me)C(Me)=N(R)](mu-Cl)]2[SbF6]2 (R = CH2(CH2)2OMe), 4, containing a weakly bound SbF6. Thus coordination of hard-donor anions to iron was favored over CO binding. The unexpected rejection of binding of CO is rationalized by the iron being in a high-spin state in this system and energetically incapable of spin crossover to a low-spin state. Theoretical calculations on CO interaction with Fe(II) centers in spin states S = 0, 1, and 2 for both the 16e complexes and their CO adducts aid further understanding of this problem. They show that interaction of CO with a high-spin 5-coordinate Fe model diimine complex is essentially thermoneutral but is exergonic by about 48 kcal/mol to a comparable but low-spin diphosphine fragment. Spin crossover is thus disfavored thermodynamically rather than kinetically (e.g. a "spin block" effect); i.e., the ligand field strengths of the primarily N-donor groups are apparently insufficient to give a low-spin CO adduct.     

Structural and catalytic studies of lithium complexes bearing pendant aminophenolate ligands

Lithium complexes bearing mono-anionic aminophenolate ligands are described. Reactions of ligand precursors HON(Me)Ph(OMe), HON(Me)Ph(SMe), HON(Me)C(OMe) or HON(Me)C(NMe2) [HON(Me)Ph(OMe) = (2-OMeC6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)Ph(SMe)= (2-SMe-C6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(OMe) = (MeOCH(2)CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(NMe2) = (Me2NCH2CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2)] with 1.1-1.3 molar equivalents of (n)BuLi in diethyl ether solution afford (LiON(Me)Ph(OMe))(2) (3), (LiON(Me)Ph(SMe))2 (4), (LiON(Me)C(OMe))2 (5) and (LiON(Me)C(NMe2))2 (6) as dinuclear lithium complexes. The BnOH adduct of , (BnOH)(LiON(Me)C(OMe)) (7), was prepared from the reaction of and BnOH in diethyl ether solution. The molecular structures are reported for ligand precursor HON(Me)Ph(SMe) and compounds 3-5 and 7. These dinuclear lithium complexes show excellent catalytic activities toward the ring-opening polymerization of L-lactide in the presence of benzyl alcohol.     

Zirconium and hafnium (1-pyridinio)imido complexes: functionalized terminal hydrazinediido analogues

Reaction of the diamidozirconium complex [Zr(N2(TBS)Npy)(NMe2)2] (1) (N2(TBS)Npy = CH3C(C5H4N)(CH2NSiMe2tBu)2) or the diamidohafnium complex [Hf(N2(TBS)Npy)(NMe2)2] (2) with one molar equiv. of 1-aminopyridinium triflate in the presence of one equiv. of pyridine gave the corresponding (1-pyridinio)imido complexes [Zr(N2(TBS)Npy)(=N-NC5H5)(OTf)(py)] (3) and [Hf(N2(TBS)Npy)(=N-NC5H5)(OTf)(py)] (4). These were converted to the acetylide complexes [Zr(N2(TBS)Npy)(=N-NC5H5)(CCPh)(py)] (5) and [Hf(N2(TBS)Npy)(=N-NC5H5)(CCPh)(py)] (6) by reaction with lithium phenylacetylide and substitution of the triflato ligand. Upon reaction of 3 and 4 with one molar equivalent of R-NC (R = tBu, Cy, 2,6-xyl), N-N bond cleavage in the (1-pyridinio)imido unit took place and the respective carbodiimido complexes [M(N2(TBS)Npy](N=C=NR)(OTf)(py)] (7-12) were formed instantaneously. A similar type of reaction with CO gave the isocyanato complex [Zr(N2(TBS)Npy](NCO)(OTf)(py)] (13). Finally, the abstraction of the pyridine ligand in compounds 3 and 4 with B(C6F5)3 led to the formation of the triflato-bridged dinuclear complexes [Zr(N2(TBS)Npy)(=N-NC5H5)(OTf)]2 (14) and [Hf(N2(TBS)Npy)(=N-NC5H5)(OTf)]2 (15).     

Synthesis, structural characterization, reactivity, and thermal stability of [eta(5):sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2)

Reaction of [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]TiCl(NMe2) (1) with 1 equiv of PhCH2K, MeMgBr, or Me3SiCH2Li gave corresponding organotitanium alkyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2) (R = CH2Ph (2), CH2SiMe3 (4), or Me (5)) in good yields. Treatment of 1 with 1 equiv of n-BuLi afforded the decomposition product {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe)(mu:sigma-CH2NMe) (3). Complex 5 slowly decomposed to generate a mixed-valence dinuclear species {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe2)(mu:sigma-CH2NMe) (6). Complex 1 reacted with 1 equiv of PhNCO or 2,6-Me2C6H3NC to afford the corresponding monoinsertion product [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-OC(NMe2)NPh] (7) or [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-C(NMe2)=N(2,6-Me2C6H3)] (8). Reaction of 4 or 5 with 1 equiv of R'NC gave the titanium eta(2)-iminoacyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(NMe2)[eta(2)-C(R)=N(R')] (R = CH2SiMe3, R' = 2,6-Me2C6H3 (9) or tBu (10); R = Me, R' = 2,6-Me2C6H3 (11) or tBu (12)). The results indicated that the unsaturated molecules inserted into the Ti-N bond only in the absence of the Ti-C(alkyl) bond and that the Ti-C(cage) bond remained intact. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Molecular structures of 2, 3, 6-8, and 10-12 were further confirmed by single-crystal X-ray analyses.     

Synthesis, structure, and reactivity of Group 4 metallacycles incorporating a Me2C-linked cyclopentadienyl-carboranyl ligand

Group 4 metallacycles [eta5:sigma-Me2C(C5H4)(C2B10H10)]Ti[eta2-N(Me)CH2CH2N(Me)] (1a), [eta5:sigma-Me2C(C5H4)(C2B10H10)]Zr[eta2-N(Me)CH2CH2N(Me)](HNMe2) (1b) and [eta5:sigma-Me2C(C5H4)(C2B10H10)]M[eta2-N(Me)CH2CH2CH2N(Me)] (M = Ti (2a), Zr (2b), Hf (2c)) were synthesized by reaction of [eta5:sigma-Me2C(C5H4)(C2B10H10)]M(NMe2)(2) (M = Ti, Zr, Hf) with MeNH(CH2)(n)NHMe (n = 2, 3). These metal complexes reacted with unsaturated molecules such as 2,6-Me2C6H3NC, PhNCO and PhCN to give exclusively M-N bond insertion products. The M-C(cage) bond remained intact. Such a preference of M-N over M-C(cage) insertion is suggested to most likely be governed by steric factors, and the mobility of the migratory groups plays no obvious role in the reactions. This work also shows that the insertion of unsaturated molecules into the metallacycles is a useful and effective method for the construction of very large ring systems.     

New synthetic routes to biscarbonylbipyridinerhenium(I) complexes cis,trans-[Re(X2bpy)(CO)2(PR3)(Y)n+ (X2bpy = 4,4'-X2-2,2'-bipyridine) via photochemical ligand substitution reactions, and their photophysical and electrochemical properties

Photochemical ligand substitution of fac-[Re(X2bpy)(CO)3(PR3)]+ (X2bpy = 4,4'-X2-2,2'-bipyridine; X = Me, H, CF3; R = OEt, Ph) with acetonitrile quantitatively gave a new class of biscarbonyl complexes, cis,trans[Re(X2bpy)(CO)2(PR3)(MeCN)]+, coordinated with four different kinds of ligands. Similarly, other biscarbonylrhenium complexes, cis,trans-[Re(X2bpy)(CO)2(PR3)(Y)]n+ (n = 0, Y = Cl-; n = 1, Y = pyridine, PR'3), were synthesized in good yields via photochemical ligand substitution reactions. The structure of cis,trans-[Re(Me2bpy)(CO)2[P(OEt)3](PPh3)](PF6) was determined by X-ray analysis. Crystal data: C38H42N2O5F6P3Re, monoclinic, P2(1/a), a = 11.592(1) A, b = 30.953(4) A, c = 11.799(2) A, V = 4221.6(1) A3, Z = 4, 7813 reflections, R = 0.066. The biscarbonyl complexes with two phosphorus ligands were strongly emissive from their 3MLCT state with lifetimes of 20-640 ns in fluid solutions at room temperature. Only weak or no emission was observed in the cases Y = Cl-, MeCN, and pyridine. Electrochemical reduction of the biscarbonyl complexes with Y = Cl- and pyridine in MeCN resulted in efficient ligand substitution to give the solvento complexes cis,trans-[Re(X2bpy)(CO)2(PR3)(MeCN)]+.     

Probing the catalytic potential of chloro nitrosyl rhenium(I) complexes

The reduction of the mononitrosyl Re(II) salt [NMe(4)](2)[ReCl(5)(NO)] (1) with zinc in acetonitrile afforded the Re(i) dichloride complex [ReCl(2)(NO)(CH(3)CN)(3)] (2). Subsequent ligand substitution reactions with PCy(3), PiPr(3) and P(p-tolyl)(3) afforded the bisphosphine Re(i) complexes [ReCl(2)(NO)(PR(3))(2)(CH(3)CN)] (3, R = Cy a, iPr b, p-tolyl c) in good yields. The acetonitrile ligand in 3 is labile, permitting its replacement with H(2) (1 bar) to afford the dihydrogen Re(I) complexes [ReCl(2)(NO)(PR(3))(2)(η(2)-H(2))] (4, R = Cy a, iPr b). The catalytic activity of 2, 3 and 4 in hydrogen-related catalyses including dehydrocoupling of Me(2)NH·BH(3), dehydrogenative silylation of styrenes, and hydrosilylation of ketones and aryl aldehydes were investigated, with the main focus on phosphine and halide effects. In the dehydrocoupling of Me(2)NH·BH(3), the phosphine-free complex 2 exhibits the same activity as the bisphosphine-substituted systems. In the dehydrogenative silylation of styrenes, 3a and 4a bearing PCy(3) ligands exhibit high catalytic activities. Monochloro Re(I) hydrides [Re(Cl)(H)(NO)(PR(3))(2)(CH(3)CN)] (5, R = Cy a, iPr b) were proven to be formed in the initiation pathway. The phosphine-free complex 2 showed in dehydrogenative silylations even higher activity than the bisphosphine derivatives, which further emphasizes the importance of a facile phosphine dissociation in the catalytic process. In the hydrosilylation of ketones and aryl aldehydes, at least one rhenium-bound phosphine is required to ensure high catalytic activity.     

Arylaminopyridinato complexes of zirconium

A range of 2-arylaminopyridines (HL) are synthesised readily from bromopyridines and amines using palladium-catalysed amination. Protonolysis reactions of these proligands with ZrX(4)(X = NMe(2), CH(2)Ph, CH(2)Bu(t)) yield zirconium complexes of the type [ML(n)X(4-n)], several of which have been characterised by X-ray crystallography. Control of metal/ligand stoichiometry and structure is pursued by investigation of the effects on substitution patterns of the pyridine and aryl rings. Some distinct patterns emerged; (i) the 6-methyl position on the pyridine appears to be particularly important with regards to control of stoichiometry, although there are co-ligand effects; (ii) structures of the metal alkyl derivatives [Zr(n)(CH(2)R)(4-n)] are dominated by aromatic pi-pi stacking, even when bulky arene substituents are employed at. This leads to the complexes adopting a C(2v)-symmetric core; (iii) the amides [Zr(2)(NMe(2))(2)] have structures for which aromatic pi-pi stacking is unfeasible, and correspondingly C(2)-symmetric or similar structures are adopted. All the structural data presented is consistent with a trans influence order at zirconium Me(2)N > RCH(2) > py.     

Chiral fluorous dialkoxy-diamino zirconium complexes: synthesis and use in stereospecific polymerization of 1-hexene

New catalysts for the isospecific polymerization of 1-hexene based on cationic zirconium complexes incorporating the tetradentate fluorous dialkoxy-diamino ligands [OC(CF(3))(2)CH(2)N(Me)(CH(2))(2)N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(2)NO)(2-)] and [OC(CF(3))(2)CH(2)N(Me)(1R,2R-C(6)H(10))N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(Cy)NO)(2-)] have been developed. The chiral fluorous diamino-diol [(ON(Cy)NO)H(2), 2] was prepared by ring-opening of the fluorinated oxirane (CF(3))(2)COCH(2) with (R,R)-N,N'-dimethyl-1,2-cyclohexanediamine. Proligand 2 reacts cleanly with [Zr(CH(2)Ph)(4)] and [Ti(OiPr)(4)] precursors to give the corresponding dialkoxy complexes [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3) and [Ti(OiPr)(2)(ON(Cy)NO)] (4), respectively. An X-ray diffraction study revealed that 3 crystallizes as a 1:1 mixture of two diastereomers (Lambda-3 and Delta-3), both of which adopt a distorted octahedral structure with trans-O, cis-N, and cis-CH(2)Ph ligands. The two diastereomers Lambda-3 and Delta-3 adopt a C(2)-symmetric structure in toluene solution, as established by NMR spectroscopy. Cationic complexes [Zr(CH(2)Ph)(ON(2)NO)(THF)(n)](+) (n=0, anion=[B(C(6)F(5))(4)](-), 5; n=1, anion=[PhCH(2)B(C(6)F(5))(3)](-), 6) and [Zr(CH(2)Ph)(ON(Cy)NO)(THF)](+)[PhCH(2)B(C(6)F(5))(3)](-) (7) were generated from the neutral parent precursors [Zr(CH(2)Ph)(2)(ON(2)NO)] (H) and [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3), and their possible structures were determined on the basis of (1)H, (19)F, and (13)C NMR spectroscopy and DFT methods. The neutral zirconium complexes H and 3 (Lambda-3/Delta-3 mixture), when activated with B(C(6)F(5))(3) or [Ph(3)C](+)[B(C(6)F(5))(4)](-), catalyze the polymerization of 1-hexene with overall activities of up to 4500 kg PH mol Zr(-1) h(-1), to yield isotactic-enriched (up to 74 % mmmm) polymers with low-to-moderate molecular weights (M(w)=4800-47 200) and monodisperse molecular-weight distributions (M(w)/M(n)=1.17-1.79).     

Cubane-type Fe4S4 clusters with chiral thiolate ligation: formation by ligand substitution, detection of intermediates by 1H NMR, and solid state structures including spontaneous resolution upon crystallization

Cubane-type clusters [Fe(4)S(4)(SR*)(4)](2-) containing chiral thiolate ligands with R* = CH(Me)Ph (1), CH(2)CH(Me)Et (2), and CH(2)CH(OH)CH(2)OH (3) have been prepared by ligand substitution in the reaction systems [Fe(4)S(4)(SEt)(4)]/R*SH (1-3, acetonitrile) and [Fe(4)S(4)Cl(4)](2-)/NaSR*(3, Me(2)SO). Reactions with successive equivalents of thiol or thiolate generate the species [Fe(4)S(4)L(4-n)(SR*)(n)](2-) (L = SEt, Cl) with n = 1-4. Clusters 1 and 2 were prepared with racemic thiols leading to the possible formation of one enantiomeric pair (n = 1) and seven diastereomers and their enantiomers (n = 2-4). Reactions were monitored by isotropically shifted (1)H NMR spectra in acetonitrile or Me(2)SO. In systems affording 1 and 2 as final products, individual mixed-ligand species could not be detected. However, crystallization of (Et(4)N)(2)[1] afforded 1-[SS(RS)(RS)] in which two sites are disordered because of occupancy of R and S ligands. Similarly, (Et(4)N)(2)[2] led to 2-[SSSS], a consequence of spontaneous resolution upon crystallization. The clusters 3-[RRRR] and 3-[SSSS] were obtained from enantiomerically pure thiols. Successive reactions lead to detection of species with n = 1-4 by appearance of four pairs of diastereotopic SCH(2) signals in both acetonitrile and Me(2)SO reaction systems. Identical spectra were obtained with racemic, R-(-), and S-(+) thiols, indicating that ligand-ligand interactions are too weak to allow detection of diastereomers (e.g., [SSSS] vs [SSRR]). The stability of 3 in Me(2)SO/H(2)O media is described.     

Diastereoselective proton transfer: a route to enantiomerically pure half-sandwich rhenium complexes

The diastereomeric methyl rhenium complex [CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}(CH3)] was prepared in two steps from chiral racemic [CpRe(NO)(CO)(NCMe)]BF4 and the chiral racemic phosphine P(Me)(Ph)(2-C6H4NMe2). The unlike diastereomer reacts preferentially with MeSO3H to give the ring-closed ionic complex unlike-[CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}]MeSO3 along with unreacted like-[CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}(CH3)], which is easily separated and converted to like-[CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}]MeSO3. Starting from (R)-P(Me)(Ph)(2-C6H4NMe2), the diastereomerically and enantiomerically pure complexes (RRe,SP)-[CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}]MeSO3 and (SRe,SP)-[CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}]MeSO3 were obtained. Thus, this reaction sequence demonstrates a highly diastereoselective proton transfer from a functionalized chiral phosphine to a transition metal. Furthermore, it provides efficient access to enantiomerically pure half-sandwich rhenium complexes.     

New diamide-diamine ligands and their zirconium and hafnium dichloride and bis(dimethylamide) complexes

The multigram syntheses of the protio ligands (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHSiMe(2)R)(2) (R = Me, H(2)N(2)NN' 3; R = (t)Bu, H(2)N(2)NN() 4) are described via reactions of the previously reported (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NH(2))(2) (1). A new synthesis of 1 is reported starting from 2-aminomethylpyridine and N-tosylaziridine, proceeding via (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHTs)(2) (2). Reaction of H(2)N(2)NN' or H(2)N(2)NN* with (n)BuLi gives good yields of the dilithiated derivatives Li(2)N(2)NN' and Li(2)N(2)NN*. Reaction of H(2)N(2)NN' or H(2)N(2)NN* with [MCl(2)(CH(2)SiMe(3))(2)(Et(2)O)(2)] gives the cis-dichloride complexes [MCl(2)(L)] (L = N(2)NN', M = Zr 7 or Hf 8; L = N(2)NN(), M = Zr 9). The corresponding reactions of H(2)N(2)NN' or H(2)N(2)NN* with [Zr(NMe(2))(4)] afford the bis(dimethylamide) derivatives [Zr(NMe(2))(2)(L)] (L = N(2)NN' 10 or N(2)NN* 11). All of these protonolysis reactions proceed smoothly and in good yields. Attempts to prepare the titanium complexes [Ti(X)(2)(N(2)NN')] (X = Cl or NMe(2)) were unsuccessful. The X-ray crystal structures of (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHTs)(2).EtOH, [ZrCl(2)(N(2)NN')].0.5C(6)H(6), [Zr(NMe(2))(2)(N(2)NN')], and [Zr(NMe(2))(2)(N(2)NN*)] are reported.     

Half-sandwich o-N,N-dimethylaminobenzyl complexes over the full size range of group 3 and lanthanide metals. synthesis, structural characterization, and catalysis of phosphine P--H bond addition to carbodiimides

The acid-base reactions between the rare-earth metal (Ln) tris(ortho-N,N-dimethylaminobenzyl) complexes [Ln(CH2C(H4NMe2-o)3] with one equivalent of the silylene-linked cyclopentadiene-amine ligand (C5Me4H)SiMe2NH(C6H2Me3-2,4,6) afforded the corresponding half-sandwich aminobenzyl complexes [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Ln(CH2C6H4NMe2-o)(thf)] (2-Ln) (Ln=Y, La, Pr, Nd, Sm, Gd, Lu) in 60-87 % isolated yields. The one-pot reaction between ScCl(3) and [Me2Si(C5Me4)(NC6H2Me3-2,4,6)]Li2 followed by reaction with LiCH2C6H4NMe2-o in THF gave the scandium analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Sc(CH2C6H4NMe2-o)] (2-Sc) in 67 % isolated yield. 2-Sc could not be prepared by the acid-base reaction between [Sc(CH2C6H4NMe2-o)3] and (C5Me4H)SiMe2NH(C6H2Me3-2,4,6). These half-sandwich rare-earth metal aminobenzyl complexes can serve as efficient catalyst precursors for the catalytic addition of various phosphine P--H bonds to carbodiimides to form a series of phosphaguanidine derivatives with excellent tolerability to aromatic carbon-halogen bonds. A significant increase in the catalytic activity was observed, as a result of an increase in the metal size with a general trend of La>Pr, Nd>Sm>Gd>Lu>Sc. The reaction of 2-La with 1 equiv of Ph2PH yielded the corresponding phosphide complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)(thf)2] (4), which, on recrystallization from benzene, gave the dimeric analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)]2 (5). Addition of 4 or 5 to iPrN=C=NiPr in THF yielded the phosphaguanidinate complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(thf)] (6), which, on recrystallization from ether, afforded the ether-coordinated structurally characterizable analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(OEt2)] (7). The reaction of 6 or 7 with Ph2PH in THF yielded 4 and the phosphaguanidine iPrN=C(PPh2)NHiPr (3a). These results suggest that the catalytic formation of a phosphaguanidine compound proceeds through the nucleophilic addition of a phosphide species, which is formed by the acid-base reaction between a rare-earth metal o-dimethylaminobenzyl bond and a phosphine P--H bond, to a carbodiimide, followed by the protonolysis of the resultant phosphaguanidinate species by a phosphine P--H bond. Almost all of the rare earth complexes reported this paper were structurally characterized by X-ray diffraction studies.     

Hypervalent neutral O-donor ligand complexes of silicon tetrafluoride, comparisons with other group 14 tetrafluorides and a search for soft donor ligand complexes

The hypervalent adducts of SiF(4), trans-[SiF(4)(R(3)PO)(2)] (R = Me, Et or Ph), cis-[SiF(4){R(2)P(O)CH(2)P(O)R(2)}] (R = Me or Ph), cis-[SiF(4)(pyNO)(2)] and trans-[SiF(4)(DMSO)(2)] have been prepared from SiF(4) and the ligands in anhydrous CH(2)Cl(2), and characterised by microanalysis, IR and VT multinuclear ((1)H, (19)F, (31)P) NMR spectroscopy. The NMR studies show extensive dissociation at ambient temperatures in non-coordinating solvents, but mixtures of cis and trans isomers of the monodentate ligand complexes were identified at low temperatures. Crystal structures are reported for trans-[SiF(4)(R(3)PO)(2)] (R = Me or Ph), and cis-[SiF(4)(pyNO)(2)]. The GeF(4) analogues cis-[GeF(4){R(2)P(O)(CH(2))(n)P(O)R(2)}] (R = Me or Ph, n = 1; R = Ph, n = 2) were similarly characterised and the structures of cis-[GeF(4){R(2)P(O)CH(2)P(O)R(2)}] (R = Me or Ph) determined. The reaction of R(3)AsO (R = Me or Ph) with SiF(4) does not give simple adducts, but forms [R(3)AsOH](+) cations as fluorosilicate salts. SiF(4) adducts of some ether ligands (including THF, 12-crown-4) were also characterised by (19)F NMR spectroscopy in solution at low temperatures (～190 K), but are fully dissociated at room temperature. Attempts to isolate, or even to identify, SiF(4) adducts with phosphine or thioether ligands in solution at 190 K were unsuccessful, contrasting with the recent isolation and detailed characterisation of GeF(4) analogues. The chemistry of SiF(4) with these oxygen donor ligands, and with soft donors (P, As, S or Se), is compared and contrasted with those of GeF(4), SnF(4) and SiCl(4). The key energy factors determining stability of these complexes are discussed.     

An investigation on the role of the nature of sulfonate ancillary ligands on the strength and concentration dependence of the second-order NLO responses in CHCl3 of Zn(II) complexes with 4,4'-trans-NC5H4CH=CHC6H4NMe2 and 4,4'-trans,trans-NC5H4CH=CH)2C6H4NMe2

To evidentiate the role of the nature of sulfonate ancillary ligands on the value of the quadratic hyperpolarizability of Zn(II) complexes with stilbazole-like ligands, the second-order nonlinear optical (NLO) properties of [ZnY(2)(4,4'-trans-NC5H4CH=CHC6H4NMe2)2] complexes (Y = CF3SO3, CH3SO3, or p-CH3C6H4SO3) are investigated. By working at relatively high concentrations (>3 x 10(-4) M), the positive effect of the triflate ligand remains unique while, with nonfluorinated sulfonate ligands, the second-order NLO response is comparable to that of the related complexes with acetate or trifluoroacetate as ancillary ligands. However, at dilutions higher than 10(-4) M, all of the sulfonate complexes reach huge quadratic hyperpolarizabilities because of solvolysis with the formation of cationic species such as [ZnY(4,4'-trans-NC5H4CH=CHC6H4NMe2)2]+, characterized by a large second-order NLO response. This view is supported by careful conductivity measurements. The same behavior occurs if 4,4'-trans-NC5H4CH=CHC6H4NMe2 is substituted by 4,4'-trans,trans-NC5H4(CH=CH)2C6H4NMe2.     

A Route to 1,2,4-oxadiazoles and their complexes via platinum-mediated 1,3-dipolar cycloaddition of nitrile oxides to organonitriles

A significant activation of the Ctbd1;N group in organonitriles upon their coordination to a platinum(IV) center has been found in the reaction of [PtCl(4)(RCN)(2)] (R = Me, Et, CH(2)Ph) with the nitrile oxides 2,4,6-R'(3)C(6)H(2)CNO (R' = Me, OMe) to give the (1,2,4-oxadiazole)platinum(IV) complexes (R = Me, R' = Me (1); R = Et, R' = Me (2); R = Et, R' = OMe (3); R = CH(2)Ph, R' = Me (4)); the [2 + 3] cycloaddition was performed under mild conditions (unless poor solubility of [PtCl(4)(RCN)(2)] precludes the reaction) starting even from complexed acetonitrile and propionitrile, which exhibit low reactivity in the free state. The reaction between complexes 2-4 and 1 equiv of Ph(3)P=CHCO(2)Me in CH(2)Cl(2) leads to the appropriate platinum(II) complexes (5-7); the reduction failed only in the case of 1 insofar as this complex is insoluble in the most common organic solvents. All the platinum compounds were characterized by elemental analyses, FAB mass spectrometry, and IR and (1)H, (13)C((1)H), and (195)Pt NMR spectroscopies, and three of them also by X-ray crystallography. The oxadiazoles formed in the course of the metal-mediated reaction were liberated almost quantitatively from their Pt(IV) complexes by reaction of the latter (complexes 2-4) with an excess of pyridine in chloroform, giving free 1,2,4-oxadiazoles and trans-[PtCl(4)(pyridine)(2)]; the sequence of the Pt(IV)-mediated [2 + 3] cycloaddition and the liberation opens up an alternative route for the preparation of this important class of heterocycles.     

Synthesis, structure, and reactivity of ruthenium carboxylato and 2-oxocarboxylato complexes bearing the bis(3,5-dimethylpyrazol-1-yl)acetato ligand

A series of ruthenium(II) acetonitrile, pyridine (py), carbonyl, SO2, and nitrosyl complexes [Ru(bdmpza)(O2CR)(L)(PPh3)] (L = NCMe, py, CO, SO2) and [Ru(bdmpza)(O2CR)(L)(PPh3)]BF4 (L = NO) containing the bis(3,5-dimethylpyrazol-1-yl)acetato (bdmpza) ligand, a N,N,O heteroscorpionate ligand, have been prepared. Starting from ruthenium chlorido, carboxylato, or 2-oxocarboxylato complexes, a variety of acetonitrile complexes [Ru(bdmpza)Cl(NCMe)(PPh3)] (4) and [Ru(bdmpza)(O2CR)(NCMe)(PPh3)] (R = Me (5a), R = Ph (5b)), as well as the pyridine complexes [Ru(bdmpza)Cl(PPh3)(py)] (6) and [Ru(bdmpza)(O2CR)(PPh3)(py)] (R = Me (7a), R = Ph (7b), R = (CO)Me (8a), R = (CO)Et (8b), R = (CO)Ph) (8c)), have been synthesized. Treatment of various carboxylato complexes [Ru(bdmpza)(O2CR)(PPh3)2] (R = Me (2a), Ph (2b)) with CO afforded carbonyl complexes [Ru(bdmpza)(O2CR)(CO)(PPh3)] (9a, 9b). In the same way, the corresponding sulfur dioxide complexes [Ru(bdmpza)(O2CMe)(PPh3)(SO2)] (10a) and [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) were formed in a reaction of the carboxylato complexes with gaseous SO2. None of the 2-oxocarboxylato complexes [Ru(bdmpza)(O2C(CO)R)(PPh3)2] (R = Me (3a), Et (3b), Ph (3c)) showed any reactivity toward CO or SO2, whereas the nitrosyl complex cations [Ru(bdmpza)(O2CMe)(NO)(PPh3)](+) (11) and [Ru(bdmpza)(O2C(CO)Ph)(NO)(PPh3)](+) (12) were formed in a reaction of the acetato 2a or the benzoylformato complex 3c with an excess of nitric oxide. Similar cationic carboxylato nitrosyl complexes [Ru(bdmpza)(O2CR)(NO)(PPh3)]BF4 (R = Me (13a), R = Ph (13b)) and 2-oxocarboxylato nitrosyl complexes [Ru(bdmpza)(O2C(CO)R)(NO)(PPh3)]BF4 (R = Me (14a), R = Et (14b), R = Ph (14c)) are also accessible via a reaction with NO[BF4]. X-ray crystal structures of the chlorido acetonitrile complex [Ru(bdmpza)Cl(NCMe)(PPh3)] (4), the pyridine complexes [Ru(bdmpza)(O2CMe)(PPh3)(py)] (7a) and [Ru(bdmpza)(O2CC(O)Et)(PPh3)(py)] (8b), the carbonyl complex [Ru(bdmpza)(O2CPh)(CO)(PPh3)] (9b), the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b), as well as the nitrosyl complex [Ru(bdmpza)(O2C(CO)Me)(NO)(PPh3)]BF4 (14a), are reported. The molecular structure of the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) revealed a rather unusual intramolecular SO2-O2CPh Lewis acid-base adduct.     

C-H activations at iridium(I) square-planar complexes promoted by a fifth ligand

In the presence of ligands such as acetonitrile, ethylene, or propylene, the Ir(I) complex [Ir(1,2,5,6-eta-C8H12)(NCMe)(PMe3)]BF4 (1) transforms into the Ir(III) derivatives [Ir(1-kappa-4,5,6-eta-C8H12)(NCMe)(L)(PMe3)]BF4 (L = NCMe, 2; eta2-C2H4, 3; eta2-C3H6, 4), respectively, through a sequence of C-H oxidative addition and insertion elementary steps. The rate of this transformation depends on the nature of L and, in the case of NCMe, the pseudo-first-order rate constants display a dependence upon ligand concentration suggesting the formation of five-coordinate reaction intermediates. A similar reaction between 1 and vinyl acetate affords the Ir(III) complex [Ir(1-kappa-4,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (7) via the isolable five-coordinate Ir(I) compound [Ir(1,2,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (6). DFT (B3LYP) calculations in model complexes show that reactions initiated by acetonitrile or ethylene five-coordinate adducts involve C-H oxidative addition transition states of lower energy than that found in the absence of these ligands. Key species in these ligand-assisted transformations are the distorted (nonsquare-planar) intermediates preceding the intramolecular C-H oxidative addition step, which are generated after release of one cyclooctadiene double bond from the five-coordinate species. The feasibility of this mechanism is also investigated for complexes [IrCl(L)(PiPr3)2] (L = eta2-C2H4, 27; eta2-C3H6, 28). In the presence of NCMe, these complexes afford the C-H activation products [IrClH(CH=CHR)(NCMe)(PiPr3)2] (R = H, 29; Me, 30) via the common cyclometalated intermediate [IrClH{kappa-P,C-P(iPr)2CH(CH3)CH2}(NCMe)(PiPr3)] (31). The most effective C-H oxidative addition mechanism seems to involve three-coordinate intermediates generated by photochemical release of the alkene ligand. However, in the absence of light, the reaction rates display dependences upon NCMe concentration again indicating the intermediacy of five-coordinate acetonitrile adducts.