GaAs(0 0 1) surface reconstructions: geometries, chemical bonding and optical properties

We re-examine the GaAs(0 0 1) surface by means of first-principles calculations based on a real-space multigrid method. The c(4×4),(2×4) and (4×2) surface reconstructions minimize the surface energy for anion-rich, stoichiometric and cation-rich surfaces, respectively. Structural models proposed in the literature to explain the Ga-rich GaAs(0 0 1) (4×6) surface are dismissed on energetic grounds. The electronic properties of the novel ζ(4×2) structure are discussed in detail. We calculate the reflectance anisotropy of the energetically most favoured surfaces. A strong influence of the surface geometry on the optical anisotropy is found.     

Decomposition mechanism of triethylindium (TEI) on a GaP(0 0 1)-(2×1) surface studied by LEED, AES, TPD and HREELS

Adsorption and decomposition of triethylindium (TEI: (C₂H₅)₃In) on a GaP(0 0 1)-(2×1) surface have been studied by low-energy electron diffraction (LEED), Auger electron spectroscopy (AES), temperature-programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). It is found from the TPD result that ethyl radical and ethylene are evolved at about 300–400 and 450–550 K, respectively, as decomposition products of TEI on the surface. This result is quite different from that on the GaP(0 0 1)-(2×4) surface. The activation energy of desorption of ethyl radical is estimated to be about 93 kJ/mol. It is suggested that TEI is adsorbed molecularly on the surface at 100 K and that some of TEI molecules are dissociated into C₂H₅ to form P–C₂H₅ bonds at 300 K. The vibration modes related to ethyl group are decreased in intensity at about 300–400 and 450–550 K, which is consistent with the TPD result. The TEI molecules (including mono- and di-ethylindium) are not evolved from the surface. Based on the TPD and HREELS results, the decomposition mechanism of TEI on the GaP(0 0 1)-(2×1) surface is discussed and compared with that on the (2×4) surface.     

A novel (8 × 4) superstructure as precursor to the c(4 × 4) phase during Sb/Si(0 0 1) desorption

The role of kinetics in the superstructure formation of the Sb/Si(0 0 1) system is studied using in situ surface sensitive techniques such as low energy electron diffraction, Auger electron spectroscopy and electron energy loss spectroscopy. Sb adsorbs epitaxially at room-temperature on a double-domain (DD) 2 × 1 reconstructed Si(0 0 1) surface at a flux rate of 0.06 ML/min. During desorption, multilayer Sb agglomerates on a stable Sb monolayer (ML) in a DD (2 × 1) phase before desorbing. The stable monolayer desorbs in the 600–850 °C temperature range, yielding DD (2 × 1), (8 × 4), c(4 × 4), DD (2 × 1) phases before retrieving the clean Si(0 0 1)-DD (2 × 1) surface. The stable 0.6-ML (8 × 4) phase here is a precursor phase to the recently reported 0.25-ML c(4 × 4) surface phase, and is reported for the first time.     

Structure of the neopentane monolayer adsorbed on MgO(0 0 1): experiments and calculations

The monolayer of C(CH₃)₄ molecules adsorbed upon a highly homogeneous MgO powder surface has been studied by means of neutron diffraction techniques at the temperature 210 K. The structure of the monolayer presents a strong commensurability c(2 × 4) with the MgO(0 0 1) surface. The results of potential calculations support the proposed structure.     

Well-ordered (1 0 0) InAs surfaces using wet chemical treatments

Atomic ordering of HCl-isopropanol (HCl-iPA) treated and vacuum annealed (1 0 0) InAs surfaces was studied by scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), and reflectance anisotropy spectroscopy (RAS). On the as-treated surface, a diffused (1 × 1) pattern is observed, which successively evolves to the β₂(2 × 4)/c(2 × 8) and (4 × 2)/c(8 × 2) ones after annealing to 330 °C and 410 °C, respectively. At the intermediate temperature of 370 °C, an ₂(2 × 4)/(4 × 2) mixed reconstruction is observed. Reflectance anisotropy spectra are compared with those of the corresponding reconstructions observed after As-decapping and found to be quite similar. Therefore we conclude that high-quality (1 0 0) InAs surfaces can be obtained by wet chemical treatment in an easy, inexpensive and practical way.     

Mechanism and energetics of dimerization of SiH2 radicals on H-terminated Si(0 0 1)-(2×1) surfaces

The mechanism and energetics are presented of the dimerization of two adsorbed surface SiH₂ groups on the H-terminated Si(0 0 1)-(2 × 1) surface to form Si₂H₄ species during the initial stages of growth in plasma deposition of hydrogenated amorphous silicon (a-Si:H) films. The reactions are observed during classical molecular-dynamics (MD) simulations of a-Si:H film deposition from SiH₂ radical precursors impinging on an initially H-terminated Si(0 0 1)-(2 × 1) surface and substrate temperature, T, over the range 500T700 K. The Si₂H₄ species resulting from the surface SiH₂ dimerization reactions undergo surface conformational changes resulting in either a non-rotated (NRD) or a rotated dimer (RD) configuration. The RD configuration is found to be the energetically favorable one. The MD simulation results for the structure of the NRD and RD surface Si₂H₄ configurations corroborate with ab initio calculations of optimized adsorption configurations of SiH₂ radicals on crystalline Si surfaces, as well as results of STM imaging of the thermal decomposition of disilane on Si(0 0 1).     

Adsorption and diffusion of a Si adatom on the H/Si(1 1 1) surface: comparison with the H/Si(0 0 1) surface

Using a first-principles method, we investigate the adsorption and diffusion of a Si adatom on the H-terminated Si(1 1 1) substrate, which would be useful in understanding the initial stages of Si homoepitaxy using a H surfactant. The adatom substitutes H atom(s) to form a monohydride structure or a dihydride structure. In forming the monohydride structure, the energy barrier for H substitution is absent. The adatom migrates on the surface with alternating its chemical state between monohydride and dihydride. These behaviors of the adatom are quite similar to those on the H/Si(0 0 1)2 × 1 surface, despite the significant difference in the substrate structure between both orientations. The resulting diffusion barrier is 1.30 eV, which is also comparable to that on the H/Si(0 0 1)2 × 1 surface.     

Density functional theory analysis of the Ni(1 1 0)c(2 × 2)-CN surface phase

Density functional theory slab calculations have been used to investigate the structure of the Ni(1 1 0)c(2 × 2)-CN adsorption phase. The results show excellent agreement with experimental quantitative determinations of this structure by photoelectron diffraction and low energy electron diffraction. In particular, they show that a lying-down orientation with the C–N axis along [0 0 1] perpendicular to the close-packed Ni rows on the surface is strongly favoured over end-on adsorption (with the C–N axis perpendicular to the surface). This geometry is also favoured over a lying-down geometry with the C–N axis aligned along the azimuth, as originally proposed for this system and supported by cluster calculations.     

Surface properties of Hafnium diboride(0 0 0 1) as determined by X-ray photoelectron spectroscopy and scanning tunneling microscopy

The surface structure and properties of the HfB₂(0 0 0 1) (Hafnium diboride, HfB₂) surface have been investigated with X-ray photoelectron spectroscopy, low energy electron diffraction (LEED), and scanning tunneling microscopy (STM). Annealing temperatures above 1900°C produce a sharp (1×1) LEED pattern, which corresponds to STM images showing flat (0 0 0 1) terraces with a very low contamination level separated by steps 3.4 Å in height, corresponding to the separation of adjacent Hf planes in the HfB₂ bulk structure. For lower annealing temperatures, extra p(2×2) spots were observed with LEED, which correspond to intermediate terraces of a p(2×1) missing row structure as observed with STM.     

Defects and Pd growth on the reduced SnO2(1 0 0) surface

Scanning tunneling microscopy experiments on a clean, reduced SnO₂(1 0 0)-(1 × 1) surface reveal surface defects with zero-, one-, and two-dimensions. Point defects consist of missing SnO/SnO₂ units. Line defects are probably crystallographic shear planes that extend to the surface and manifest themselves as rows of atoms, shifted half a unit cell along the [0 1 0] direction. Their ends act as preferential nucleation sites for the formation of Pd clusters upon vapor deposition. Areas of a more reduced surface phase, still with a (1 × 1) structure and a half-unit cell deep, form at [0 0 1]-oriented step edges.     

Local structure of OH adsorbed on the Ge(0 0 1)(2 × 1) surface using scanned-energy mode photoelectron diffraction

The local geometry of OH fragments adsorbed on the Ge(0 0 1)(2 × 1) surface has been examined using O 1s scanned energy mode photoelectron diffraction. These fragments were obtained by the dissociative reaction of the clean surface with H₂O. The Ge–O bond length is found to be 1.76 ± 0.02 Å and the Ge–O bond angle to be 15° ± 2° relative to the surface normal. Some information about the positions of the Ge dimer atoms has also been obtained.     

Adsorption of oxygen and carbon dioxide on cesium-reconstructed Ag(1 1 0) surface

The adsorption of oxygen and carbon dioxide on cesium-reconstructed Ag(1 1 0) surface has been studied with scanning tunneling microscopy (STM) and temperature programmed desorption (TPD). At 0.1 ML Cs coverage the whole surface exhibits a mixture of (1 × 2) and (1 × 3) reconstructed structures, indicating that Cs atoms exert a cooperative effect on the surface structures. Real-time STM observation shows that silver atoms on the Cs-covered surface are highly mobile on the nanometer scale at 300 K. The Cs-reconstructed Ag(1 1 0) surface alters the structure formed by dissociative adsorption of oxygen from p(2 × 1) or c(6 × 2) to a p(3 × 5) structure which incorporates 1/3 ML Ag atoms, resulting in the formation of nanometer-sized (10–20 nm) islands. The Cs-induced reconstruction facilitates the adsorption of CO₂, which does not adsorb on unreconstructed, clean Ag(1 1 0). CO₂ adsorption leads to the formation of locally ordered (2 × 1) structures and linear (2 × 2) structures distributed inhomogeneously on the surface. Adsorbed CO₂ desorbs from the Cs-covered surface without accompanied O₂ desorption, ruling out carbonate as an intermediate. As a possible alternative, an oxalate-type surface complex [OOC–COO] is suggested, supported by the occurrence of extensive isotope exchange between oxygen atoms among CO₂(a). Direct interaction between CO₂ and Cs may become significant at higher Cs coverage (>0.3 ML).     

Stabilization against initial oxidation using surface segregation of sulfur on Fe(1 0 0)

Surface segregation process of dissolved elements on a Fe(1 0 0) surface and the initial oxidation processes of the sulfur segregated surfaces were studied in situ by AES and RHEED. The surface enrichment of sulfur has formed a c(2×2) superstructure at elevated temperatures. The Fe(1 0 0)c(2×2)-S surface was found to have stabilization effect against initial oxidation. The retardation of oxidation was most enhanced when the sulfur surface concentration reached at the saturation coverage (1/2 ML). The possible physical origins of the stabilization effect are proposed.     

Monte Carlo simulation for temperature dependence of Ga diffusion length on GaAs(0 0 1)

Diffusion length of Ga on the GaAs(0 0 1)-(2×4)β2 is investigated by a newly developed Monte Carlo-based computational method. The new computational method incorporates chemical potential of Ga in the vapor phase and Ga migration potential on the reconstructed surface obtained by ab initio calculations; therefore we can investigate the adsorption, diffusion and desorption kinetics of adsorbate atoms on the surface. The calculated results imply that Ga diffusion length before desorption decreases exponentially with temperature because Ga surface lifetime decreases exponentially. Furthermore, Ga diffusion length L along and [1 1 0] on the GaAs(0 0 1)-(2×4)β2 are estimated to be and L_[110]200 nm, respectively, at the incorporation–desorption transition temperature (T860 K).     

RAS: An efficient probe to characterize Si(0 0 1)-(2 × 1) surfaces

A complete inspection of the capabilities of reflectance anisotropy spectroscopy (RAS) in studying the adsorption of molecules or atoms on the Si(0 0 1)-(2 × 1) surface is presented. First, a direct comparison between RA spectra recorded on the clean Si(0 0 1)-(2 × 1) and the corresponding topography of the surface obtained using scanning tunneling microscopy (STM) allows us to quantify the mixing of the two domains that are present on the surface. Characteristic RA spectra recorded for oxygen, hydrogen, water, ethylene, benzene are compared to try to elucidate the origin of the optical structures. Quantitative and qualitative information can be obtained with RAS on the kinetics of adsorption, by monitoring the RA signal at a given energy versus the dose of adsorbate; two examples are presented: H₂/Si(0 0 1) and C₆H₆/Si(0 0 1). Very different behaviours in the adsorption processes are observed, making of this technique a versatile tool for further investigations of kinetics.     

Large scale atomic ordering on uncovered GaAs(0 0 1) after InAs monolayer capping: Atomic structure of the (12 × 6) reconstruction

A well ordered c(8 × 2)-InAs monolayer is grown by molecular beam epitaxy (MBE) on a GaAs(0 0 1) substrate. After slow sublimation of this monolayer up to 560 °C, a homogeneously (n × 6) reconstructed GaAs surface is obtained. This surface is studied by scanning tunneling microscopy (STM) in UHV. This shows that it is well-ordered on a large scale with 200 nm long As dimer rows along and is also locally (12 × 6) reconstructed, the cell structure is proposed. We believe that this surface organization results from the specific As/Ga (0.7) surface atomic ratio obtained after the InAs monolayer growth and sublimation cycle.     

Spatially resolved dynamics of the TiO2(1 1 0) surface reconstruction

We use low-energy electron microscopy to image the reversible transformation of the TiO₂(1 1 0) surface between a high-temperature 1 × 1 structure and a low-temperature 1 × 2 structure. The reconstruction dynamics are novel: 1 × 2 bands nucleated during cooling at the steps of the starting 1 × 1 surface and then grew laterally from the steps. The transformation kinetics are dominated by mass flow from the surface to the bulk, a process that facilitates converting the high-density 1 × 1 phase to the lower-density 1 × 2 phase. We have also imaged how the 1 × 1 surface reconstructs to 1 × 2 phase after sufficient oxygen is removed from the crystal’s bulk during vacuum annealing. 1 × 2 bands also nucleated and grew laterally from the initial 1 × 1-surface’s steps. However, because this isothermal 1 × 1-to-1 × 2 transition occurs largely by mass redistribution on the surface, the steps of the initial 1 × 1 surface and final 1 × 2 surface are offset. We propose models of mass redistribution during the 1 × 1/1 × 2 phase transition to explain this effect. We conclude that the phase transition is first-order because it always occurred by the nucleation and growth of discrete phases. Finally, we show that quenching can roughen TiO₂’s surface by forming pits and that changing temperature causes step motion on 1 × 2 surfaces.     

Hydrogen adsorption on Mo1−xRex(110) (x=0–0.25) surfaces

The effects of adsorbed H on the Mo_1−xRe_x(110), x=0, 0.05, 0.15, and 0.25, surfaces have been investigated using low-energy electron diffraction (LEED) and high-resolution electron energy loss spectroscopy (HREELS). For the x=0.15 alloy only, a c(2×2) LEED pattern is observed at a coverage Θ0.25 ML. A (2×2) pattern is observed for H coverages around Θ0.5 ML from surfaces with x=0, 0.05, and 0.15. Both c(2×2) and (2×2) patterns are attributed to reconstruction of the substrate. At higher coverages, a (1×1) pattern is observed. For the alloy surface with x=0.25, only a (1×1) pattern is obtained for all H coverages. Two H vibrations are observed in HREELS spectra for all Re concentrations, which shift to higher energies at intermediate coverages. Both peaks exhibit an isotopic shift, confirming their assignment to hydrogen. For Re concentrations of x=0.15 and higher, a third HREELS peak appears at 50 meV as H (D) coverage approaches saturation. This peak does not shift in energy with isotopic substitution, yet cannot be explained by contamination. The intrinsic width of the loss peaks depends on the Re concentration in the surface region and becomes broader with increasing x. This broadening can be attributed to surface inhomogeneity, but may also reflect increased delocalization of the adsorbed hydrogen atom.     

A comparative infrared study of H2O reactivity on Si(1 0 0)-(2 × 1), (2 × 1)-H, (1 × 1)-H and (3 × 1)-H surfaces

The water adsorption on the bare and H-terminated Si(1 0 0) surfaces has been studied by the BML-IRRAS technique. It is found that H-terminated surfaces are much less reactive compared to the bare silicon surfaces. The (1 × 1)-H and (3 × 1)-H surfaces show similar and less reactivity pattern compared to the (2 × 1)-H surface. At higher exposures, the water reaction with coupled monohydride species provides an effective channel for oxygen insertion into the back bonds of dihydride species. It is not attributed to the H–Si–Si–H + H₂O → H–S–Si–OH + H₂, which could give rise to the characteristic Si–H and Si–OH modes, respectively at 2081 and 921 cm⁻¹. A more suitable reaction mechanism involving a metastable species, H–Si–Si–H + H₂O → H₂Si  HO–Si–H (metastable) explains well the bending modes of oxygen inserted silicon dihydride species which are observed relatively strongly in the reaction of water with H-terminated Si(1 0 0) surfaces.     

Morphological anisotropy during migration enhanced epitaxy of GaAs(0 0 1)

The GaAs(0 0 1) surface morphology and structure during growth by migration enhanced epitaxy (MEE) has been studied by reflection high energy electron diffraction and scanning tunneling microscopy. Changes induced by varying the incident As/Ga flux ratio, growth temperature and the total amount of material deposited in each cycle have been studied and the results compared with GaAs(0 0 1) growth by conventional molecular beam epitaxy (MBE). Comparison of the surface morphology at the end of the Ga and As cycles indicates no clear evidence for any enhancement in the Ga adatom diffusion length during the Ga cycle. However, the morphological anisotropy of the growth front does change significantly and it is proposed that this changing anisotropy during MEE enables Ga adatom diffusion along both azimuths. The surface anisotropy during MEE growth is found to increase with the Ga/As ratio. Although there is a clear correlation between composition and morphology, we have also found that highly ordered and flat surfaces are not necessarily an indication of stoichiometric material. We also attempt to clarify a recent controversy on the structure of the c(4 × 4) reconstruction by studying the surface structure at the end of the As cycle as a function of the As/Ga ratio.