Study of the N2 bΠu state via 1 + 1 multiphoton ionization

Medium-resolution spectra of the N₂ b¹Π_u-X¹Σ_g⁺ band system were recorded by 1 + 1 multiphoton ionization. In the spectra we found different linewidths for transitions to different vibrational levels in the b ¹Π_u state: Δν₀ = 0.50 ± 0.05 cm⁻¹, Δν₁ = 0.28 ± 0.02 cm⁻¹, Δν₂ = 0.65 ± 0.06 cm⁻¹, Δν₃ = 3.2 ± 0.5 cm⁻¹, Δν₄ = 0.60 ± 0.07 cm⁻¹, and Δν₅ = 0.28 ± 0.02 cm⁻¹. From these linewidths, predissociation lifetimes τ_ν were obtained: τ₀ = 16 ± 3 ps, τ₁ > 150 ps, τ₂ = 10 ± 2 ps, τ₃ = 1.6 ± 0.3 ps, τ₄ = 9 ± 2 ps, and τ₅ > 150 ps. Band origins and rotational constants for the b ¹Π_uν = 0 and 1 levels were determined for the ¹⁴N₂ and ¹⁴N¹⁵N molecules.     

Microwave spectrum and rotational isomers of ethyl fluoroformate

The microwave spectrum of ethyl fluoroformate displays strong a-type R branch transitions from two rotameric forms. One species (extended form) has rotational constants A₀ = 9191.3(9) MHz, B₀ = 2112.61(1) MHz, C₀ = 1756.73(1) MHz which are consistent with a syn-anti (τ₁(OCOC) = 0°, r₂(cocc) = 180°) planar heavy atom structure. The second species (compact form) has rotational constants A₀ = 7760(3) MHz, B₀ = 2388.38(4) MHz, C₀ = 2102.47(3) MHz which are consistent with a syn-gauche (τ₁(ococ) = 0°, τ₂(cocc) ˜ 90°) structure. The two conformational forms have approximately equal energy (0 ± 40 cm⁻¹). Four vibrational satellites of the extended species have been analyzed yielding a torsional frequency around the O-ethyl bond of 70(10) cm⁻¹. Three vibrational satellites attributed to the O-ethyl torsion of the compact species have been analyzed yielding a vibrational frequency of 90(10) cm⁻¹. Approximate Fourier coefficients of a three term potential function for internal rotation about the O-ethyl bond have been determined. Vibrational satellites attributed to the first excited states of the O-ester torsion have been analyzed for both conformers. The torsional vibrational frequency around the O-ester bond is 110(15) cm⁻¹ for the extended conformers and 120(20) cm⁻¹ for the compact.     

On the vibrational spectra and conformational stability of 1,1-dimethylhydrazine from temperature dependent FT-IR spectra of krypton solutions and ab initio calculations

Variable temperature (−105 to −150 °C) studies of the infrared spectra (3500–400 cm⁻¹) of 1,1-dimethylhydrazine, (CH₃)₂NNH₂, in liquid krypton have been carried out. No convincing spectral evidence could be found for the trans conformer which is expected to be at least 600 cm⁻¹ less stable than the gauche form. The structural parameters, dipole moments, conformational stability, vibrational frequencies, and infrared and Raman intensities have been predicted from MP2/6-31G(d) ab initio calculations. The predicted infrared and Raman spectra are compared to the experimental ones. The adjusted r₀ parameters from MP2/6-311+G(d,p) calculations are compared to those reported from an electron diffraction study. The energy differences between the gauche and trans conformers have been obtained from MP2 ab initio calculations as well as from density functional theory by the B3LYP method calculations from a variety of basis sets. All of these calculations indicate an energy difference of 650–900 cm⁻¹ with the B3LYP calculations predicted the larger values. The potential function governing the conformational interchange has been predicting from both types of calculations and comparisons have been made. The barrier to internal rotation by the independent rotor model of the inner methyl group is predicted to have a value of 1812 cm⁻¹ and that of the outer one of 1662 cm⁻¹ from ab initio MP2/6-31G(d) calculations. These values agree well with the experimentally determined values of 1852±16 and 1558±12 cm⁻¹, respectively, from a fit of the torsional transitions with the coupled rotor model. For the coupled rotor model the predicted V′₃₃ (sin 3τ₀ sin 3τ₁ term) value which ranged from 190 to 232 cm⁻¹ is in reasonable agreement with the experimental value of 268±3 cm⁻¹ but the predicted V₃₃ (cos 3τ₀ cos 3τ₁ term) value of −73 to −139 cm⁻¹ is 25% smaller and of the opposite sign of the experimental value of 333±22 cm⁻¹. These theoretical and spectroscopy results are compared to similar quantities of some corresponding molecules.     

The pure rotational Raman spectra of cyanogen, C2N2 and C2N2

The pure rotational Raman spectra of C₂¹⁴N₂ and C₂¹⁵N₂ have been recorded photographically using a 3-metre spectrograph with a reciprocal linear dispersion of 1.4 cm⁻¹ mm⁻¹ at 488.0 nm and analysed to give the rotational and centrifugal distortion constants for both species. Corrections were applied to compensate for the effect of molecules in excited vibrational states on the pure rotational spectra. Comparisons are made with previous infrared vibration—rotational studies on these species and with previous Raman studies on C₂¹⁴N₂. The following bond lengths were calculated: r₀(C---N) = 116 ± 1 pm; r₀(C---C) = 138 ± 2 pm.     

A study on the formation mechanism of graphite fluorides by Raman spectroscopy

Raman spectra were measured of highly fluorinated graphite samples prepared at room temperature, 380 and 515 °C. C_xF prepared at room temperature showed a novel downshifted band at 1555–1542 cm⁻¹ along with G band at 1593–1583 cm⁻¹. Similar behavior is also observed for samples prepared at 380 and 515 °C at early stages of fluorination, after which the Raman shifts completely disappeared. Raman spectra as well as X-ray diffraction (XRD) analysis suggest that graphite fluorides, (CF)_n and (C₂F)_n are formed via fluorine-intercalated phase with planar graphene layers.     

Spectra and structure of phosphorus-boron compounds : IV. Vibrational spectra of solid trifluorophosphineborane

The Raman spectra of F₃PBH₃ and F₃PBD₃ have been recorded (2500-10 cm⁻¹) of the liquids (−80°C) and solids (−196°C) as well as the infrared spectra (4000-33 cm⁻¹) of the solids. In the spectrum of the solid state many of the ¹⁰B and ¹¹B fundamentals were clearly defined and it was also possible to assign the BH₃ torsional frequency from the infrared and Raman spectra of the solids. A complete vibrational assignment is proposed and a normal coordinate calculation carried out. The force constant of 2.46 mdyn Å⁻¹ for the P-B stretching mode is consistent with the short P-B bond; this constant is compared to the similar quantity for several other phosphorus-boron compounds. All of the E modes for the “free” molecule are shown to be split by the site symmetry which indicates that the molecules occupy C_s or C₁ sites. The large number of observed lattice modes is consistent with two or more molecules per primitive cell. The torsional frequency was observed at 224 cm⁻¹ and 167 cm⁻¹ in hydrogen and deuterium compounds in the solid, respectively. These frequencies gave a periodic barrier of 4.15 kcal mole⁻¹ for F₃PBH₃ and 4.31 kcal mole⁻¹ for F₃PBD₃. CNDO/2 calculations have been carried out for F₃PBH₃ and the isoelectronic F₃SiCH₃ molecule in both the staggered and eclipsed forms and the dipole and barrier origins are discussed.     

State-selected reaction and relaxation of CH with H2

The state-selected reaction of CH(X₂Πν″ = 0, 1) with H₂ has been studied, in which CH was generated by IRMPD of a precursor gas, CH₃OH. The subsequent evolution of CH (ν″ = 0, 1) was monitored by the sensitive LIF technique. For the ground state and vibrationally excited state CH, the reaction with H₂ is found to depend on the total pressure in the sample cell at room temperature, which suggests that the reaction proceeds through an intermediate adduct, CH₃. The backward dissociation process is found to depend on the buffer pressure, which can be rationalized via a collision-induced backward dissociation. The decay rates of CH (ν″ = 0, 1) due to collisions with H₂ and Ar at a buffer pressure of 10 Torr are k_H2 (ν″ = 1) = (2.3±0.1) × 10⁻¹ cm³ molecule⁻¹ s⁻¹ and k_Ar (ν″ = 1) = (4.4±0.1) × 10⁻¹³ cm³ molecule⁻¹ s⁻¹. Possible effects of the vibrational excitation on the reaction rate of CH (ν″ = 1) are discussed.     

Conformational stability of 1-bromo-2-fluoroethane from temperature dependent FT-IR spectra of rare gas solutions

Variable temperature (−55 to −135°C) studies of the infrared spectra (3500–400 cm⁻¹) of 1-bromo-2-fluoroethane, BrCH₂CH₂F, dissolved in liquid krypton and xenon have been recorded. From these data, the enthalpy difference has been determined to be 108±9 cm⁻¹ (1.296±0.113 kJ/mol) and 112±8 cm⁻¹ (1.346±0.098 kJ/mol) from the krypton and xenon solutions, respectively, with the trans conformer the more stable rotamer. Complete vibrational assignments are presented for both conformers which are consistent with the predicted frequencies obtained from the ab initio MP2/6-31G^* calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been obtained from RHF/6-31G^* and/or MP2/6-31G^* ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate. Structural parameters and conformational stability have also been obtained from MP2/6-311+G^** calculations. Combining the ab initio predicted structural parameters with the microwave rotational constants, r_o parameters have been obtained for the gauche conformer.     

Infrared studies of chromones—I Carbonyl and hydroxyl regions

Quantitative IR solution data in carbon tetrachloride and chloroform are recorded for the CO and OH regions of 31 chromones. In the 1580–1700 cm⁻¹ region, 5-hydroxychromones show three main maxima, the two of highest frequency, at 1663 ± 3 cm⁻¹ and 1630 ± 5 cm⁻¹ in CCl₄ (1661 ± 2 cm⁻¹ and 1627 ± 5 cm⁻¹ in CHCl₃), being sufficiently intense as to possess high CO character. Typically, 5-alkoxychromones exhibit two intense maxima in this region, 1663 ± 3 cm⁻¹ and 1613 ± 7 cm⁻¹ in CCl₄ (1657 ± 2 cm⁻¹ and 1608 ± 12 cm⁻¹ in CHCl₃). Diagnostically useful changes in contour and principal peak positions can be seen for substituted and annellated 5-hydroxychromones. In the 2500–3650 cm⁻¹ region, the stretching frequencies of OH groups at the most commonly encountered positions (C-5, C-7, and 2-CH₂OH) in natural chromones, are identified.     

Caractéristiques spectroscopiques des liaisons hydrogène N-H-N très fortes. Études des acides A3(CN)6, (A=H,D; M=Fe,Co) par spectroscopie de vibration

Infrared and Raman spectra of the polycrystalline complex cyanide acids H₃M^III(CN)₆ (M=Fe,Co) and their deutero analogues were investigated at 300 and 90K in the region 4000-100 cm⁻¹. The spectra indicate clearly that the site symmetry of the M(CN)₆³⁻ ion is C_3v for M=Fe and D_3d for M=Co. These conclusions are consistent with an asymmetric N-H·N bond in H₃Fe(CN)₆ and with a symmetric one in H₃Co(CN)₆. The N-H stretching frequencies are assigned as ca. 1100 cm⁻¹ (Fe) and as 560 cm⁻¹ (Co), the shift being related to the difference in the hydrogen bonding strength, 2.665 Å (Fe) and 2.582 Å (Co). The spectroscopic behaviour of these very short N-H·N bonds appears to be similar to that of the strong O-H·O bonds in type A (for M=Co) or type pseudo-A compounds (for M=Fe).     

A theoretical investigation of C5

Large-scale CEPA-1 calculations have been carried out for linear C₅, a molecule of substantial interest to combustion processes and astrochemistry. The equilibrium bond lengths are predicted to be 1.289 Å (outer CC bond) and 1.283 Å (inner CC bond), with an accuracy of 0.002 Å. The calculated ν₃ band origins of 2161 cm⁻¹ (105 CGTO basis) and 2137 cm⁻¹ (150 CGTO basis) are in good agreement with the experimental value of 2169 cm⁻¹. This band has an extremely large transition moment of 0.74 D. The less intense stretching fundamental ν₄ (μ=0.18 D) is predicted to occur at 1478 ± 10 cm⁻¹. Predictions for the totally symmetric stretching and the bending vibrational frequencies (in cm⁻¹) are 2008 (1σ_g⁺), 792 (2σ_g⁺), 570 (1π_u), 209 (1π_g) and 119 (2π_u).     

The beryllium dimer potential

The convergence of ab initio calculations of the beryllium dimer potential is examined with several basis sets orders of perturbation theory. When the atomic pair natural orbital basis set calculations are extrapolated to the complete basis set and full CI limits, the calculated parameters: R_e=2.447 Å, D_e=827 cm⁻¹, ν₀₁=212.7 cm⁻¹, ν₁₂=167.2 cm⁻¹, ν₂₃=121.5 cm⁻¹ and ν₃₄=77.7 cm⁻¹ are in good agreement with the experimental parameters: R_e=2.45 Å, D_e=839±10 cm⁻¹, ν₀₁=223.2 cm⁻¹, ν₁₂=169.7 cm⁻¹, ν₂₃=122.5 cm⁻¹, and ν₃₄=79 cm⁻¹.     

Raman scattering study of highly fluorinated graphite

Raman spectra of highly fluorinated C_xF samples (1<x<2) prepared at room temperature and 515°C were measured. C_xF samples prepared at room temperature exhibited two Raman bands at 1593–1583 and 1555–1542 cm⁻¹. Graphite samples fluorinated at 515°C for 1 and 2 min also gave similar bands at 1581–1580 and 1550–1538 cm⁻¹. However, graphite samples fluorinated from 15 min to 10 h at 515°C no longer showed such spectra. The Raman peaks shifted to lower frequencies with increasing fluorine concentration in C_xF. This trend is due to the weakening of the C---C bonds of the graphene layers. Observation of both kinds of Raman bands suggests the coexistence of two highly fluorinated phases, C₂F and C₁F, in the samples. The process of formation of graphite fluoride is discussed on the basis of the Raman spectra of C_xF samples obtained at 515°C.     

Conformational stabilities of dimethylmethoxyphosphine and dimethyl(methylthio)phosphine from temperature dependent infrared spectra of rare gas solutions

Variable temperature (−55 to −150°C) studies of the infrared spectra (3500 to 400 cm⁻¹) of dimethylmethoxyphosphine, (CH₃)₂POCH₃ and dimethyl(methylthio)phosphine, (CH₃)₂PSCH₃ dissolved in liquid krypton and/or xenon have been recorded. From these data, the enthalpy differences have been determined to be 393±50 cm⁻¹ (4.71±0.60 kJ/mol), for (CH₃)₂POCH₃ with the near-cis conformer the more stable rotamer and 80±10cm⁻¹ (0.96±0.12 kJ/mol) for (CH₃)₂PSCH₃ with the cis conformer the more stable form. Complete vibrational assignments are presented for both molecules, which are consistent with the predicted frequencies obtained from the ab initio MP2/6-31G(d) calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been obtained from RHF/6-31G(d) and/or MP2/6-31G(d) ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate as well as with some corresponding results for some similar molecules.     

Far infrared spectra, conformational equilibria, vibrational assignments, ab initio calculations and structural parameters for 2-bromoethanol

The far infrared spectrum from 370 to 50 cm⁻¹ of gaseous 2-bromoethanol, BrCH₂CH₂OH, was recorded at a resolution of 0.10 cm⁻¹. The fundamental O–H torsion of the more stable gauche (Gg′) conformer, where the capital G refers to internal rotation around the C–C bond and the lower case g to the internal rotation around the C–O bond, was observed as a series of Q-branch transitions beginning at 340 cm⁻¹. The corresponding O–H torsional modes were observed for two of the other high energy conformers, Tg (285 cm⁻¹) and Tt (234 cm⁻¹). The heavy atom asymmetric torsion (rotation around C–C bond) for the Gg′ conformer has been observed at 140 cm⁻¹. Variable temperature (−63 to −100°C) studies of the infrared spectra (4000–400 cm⁻¹) of the sample dissolved in liquid xenon have been recorded. From these data the enthalpy differences have been determined to be 411±40 cm⁻¹ (4.92±0.48 kJ/mol) for the Gg′/Tt and 315±40 cm⁻¹ (3.76±0.48 kJ/mol) for the Gg′/Tg, with the Gg′ conformer the most stable form. Additionally, the infrared spectrum of the gas, and Raman spectrum of the liquid phase are reported. The structural parameters, conformational stabilities, barriers to internal rotation and fundamental frequencies have been obtained from ab initio calculations utilizing different basis sets at the restricted Hartree–Fock or with full electron correlation by the perturbation method to second order. The theoretical results are compared to the experimental results when appropriate. Combining the ab initio calculations with the microwave rotational constants, r₀ adjusted parameters have been obtained for the three 2-haloethanols (F, Cl and Br) for the Gg′ conformers.     

New aspects of the reaction of silver(I) cations with the ethylenediaminetetraacetate ion

The highly neutralized ethylenediaminetetraacetate (EDTA) titrant (95–99% as Y⁴⁻ anion) precipitates with Ag⁺ cations to form the Ag₄Y species, in aqueous medium, which is well characterized from conductometric titration, thermal analysis and potentiometric titration of the silver content of the solid. The precipitate dissolves in excess Y⁴⁻ to form a complex, AgY³⁻. Equilibrium studies at 25°C and ionic strength 0.50 M (NaNO₃) have shown from solubility and potentiometric measurements that the formation constant (95% confidence level) β₁ = (1.93 ± 0.07) × 10⁵ M⁻¹ and the solubility products are K_S0 = [Ag +]⁴[Y⁴⁻] = (9.0 ± 0.4) × 10⁻¹⁸ M⁵ and K_S1 = [Ag +]³[AgY³⁻] = (1.74 ± 0.08) × 10⁻¹² M⁴. The presence of Na⁺, rather than ionic strength, markedly affects the equilibrium; the data at ionic strength 0.10 M are: β₁ = (1.19 ± 0.03) × 10⁶ M⁻¹, K_S0 = (1.6 ± 0.4) × 10⁻¹⁹ M⁵ and K_S1 = (1.9 ± 0.5) × 10⁻¹³ M⁴; at ionic strength tending to zero; β₁ = (1.82 ± 0.05) × 10⁷ M⁻¹, K_S0 = (2.6 ± 0.8) × 10⁻²² M⁵ and K_S1 = (5 ± 1) × 10⁻¹⁵ M⁴. The intrinsic solubility is 2.03 mM silver (I) in 0.50 M NaNO₃. Well-defined potentiometric titration curves can be taken in the range 1–2 mM with the Ag indicator electrode. Thermal analysis revealed from differential scanning calorimetry a sharp exothermic peak at 142°C; thermal gravimetry/differential thermal gravimetry has shown mass loss due to silver formation and a brown residue, a water-soluble polymeric acid (decomposition range 135–157°C), tending to pure silver at 600°C, consistent with the original Ag₄Y salt.     

The rovibrational analysis of the high-resolution IR spectrum of CD2HF below 1200 cm: an interacting tetrad of vibrational levels

The spectrum of CD₂HF was measured by high-resolution interferometric Fourier-transform IR (FTIR) spectroscopy (apodised instrumental band with:0.004 cm⁻¹ fwhm) between 800 and 1200 cm⁻¹ covering the four lowest fundamentals. A complete rotational analysis using a semi-automatic assignment procedure yields accurate band centres (ν₉: 912.2028 cm⁻¹, ν₆:964.4994 cm⁻¹, ν₅: 1050.5104 cm⁻¹, ν₄: 1093.8632 cm⁻¹) and a complete set of first-order Coriolis coupling constants. The most important couplings occur between ν₉ and ν₆ (ξ_a= 1.069 cm⁻¹, ξ_c= −0.3535 cm⁻¹) and between ν₅ and ν₄ (ξ_b= −0.80606 cm⁻¹). The analysis was guided by and compared with results from our ab initio calculations for Coriolis constants and transition moments using CADPAC at TZP/MP2 level.     

Raman and infrared spectra, conformational stability, ab initio calculations and vibrational assignments for 2-chloroethyl silane

The infrared (3500–30 cm⁻¹) spectra of gaseous and solid and the Raman (3500–10 cm⁻¹) spectra of liquid with quantitative depolarization ratios and solid 2-chloroethyl silane, ClCH₂CH₂SiH₃, have been recorded. Similar data have been recorded for the Si–d₃ isotopomer. These data indicate that two conformers, trans and gauche, are present in the fluid states but only one conformer, trans, is present in the solid. The mid-infrared spectra of the sample dissolved in liquified xenon as a function of temperature (−55 to −100°C) has been recorded. The enthalpy difference between the conformers has been determined to be 181±12 cm⁻¹ (2.17±0.14 kJ/mol) with the trans rotamer the more stable form. From the isolated Si–H frequencies from the Si–d₂ isotopomer the r_o Si–H distances of 1.484 and 1.483 Å for the trans and 1.481 for the gauche conformers have been obtained. Ab initio calculations have been carried out with several different basis sets up to MP2/6-311+G** from which structural parameters and conformational stabilities have been determined. With all the basis sets the trans form is predicted to be the more stable conformer which is consistent with the experimental results. These results are compared to the corresponding quantities for the carbon analogue.     

Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of 2-hexyne

The infrared spectra (3500–50 cm⁻¹) of the gas and solid and the Raman spectra (3500–50 cm⁻¹) of the liquid and solid have been recorded for 2-hexyne, CH₃–CC–CH₂CH₂CH₃. Variable temperature studies of the infrared spectrum (3500–400 cm⁻¹) of 2-hexyne dissolved in liquid krypton have also been recorded. Utilizing four anti/gauche conformer pairs, the anti(trans) conformer is found to be the lower energy form with an enthalpy difference of 74±8 cm⁻¹ (0.88±0.10 kJ/mol) determined from krypton solutions over the temperature range −105 to −150 °C. At room temperature it is estimated that there is 42% of the anti conformer present. Equilibrium geometries and energies of the two conformers have been determined by ab initio (HF and MP2) and hybrid DFT (B3LYP) methods using a number of basis sets. Only the HF and DFT methods predict the anti conformer as the more stable form as found experimentally. A vibrational assignment is proposed based on the force constants, relative intensities, depolarization ratios from the ab initio and DFT calculations and on rotational band contours obtained using the calculated equilibrium geometries. From calculated energies it is shown that the CH₃ group exhibits almost completely free rotation which is in agreement with the observation of sub-band structure for the degenerate methyl vibrations from which values of the Coriolis coupling constants, ζ, have been determined. The results are compared to similar properties of some corresponding molecules.     

Infrared, and Raman spectra, conformational stability, normal coordinate analysis, ab initio calculations, and vibrational assignment of 1-chlorosilacyclobutane

The infrared spectra (3500–40 cm⁻¹) of gaseous and solid and the Raman spectra (3500–30 cm⁻¹) of liquid and solid 1-chlorosilacyclobutane, c-C₃H₆SiClH, have been obtained. Both the axial and equatorial conformers with respect to the chlorine atom have been identified in the fluid phases. Variable temperature (−105 to −150°C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data, the enthalpy difference has been determined to be 211±17 cm⁻¹ (2.53±0.21 kJ/mol), with the equatorial conformer being the more stable form and the only conformer remaining in the annealed solid. At ambient temperatures, approximately 26% of the axial conformers are present in the vapor phase. A complete vibrational assignment is proposed for the equatorial conformer, and many of the fundamentals of the axial conformers have also been identified. The vibrational assignments are supported by normal coordinate calculations utilizing ab initio force constants. Complete equilibrium geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been determined for both rotamers by ab initio calculations employing the 6-31G(d) basis set at the levels of restricted Hartree–Fock (RHF) and/or Moller–Plesset (MP) to second order. Structural parameters have also been obtained using MP2/6-311+G(d,p) ab initio calculations. The r₀ parameters for both conformers are obtained from a combination of the ab initio predicted values and the twelve previously reported microwave rotational constants. The results are discussed and compared to those obtained for some similar molecules.