Environmentally benign synthesis of β-hydroxy sulfides using cyclic carbonates catalyzed by large-pore zeolites

Abstract

An efficient one-pot synthesis of β-hydroxy sulfides from thiophenol and cyclic carbonates catalyzed by large-pore zeolites has been reported. Reaction of thiophenol with ethylene carbonate in the presence of the Na-X zeolite catalyst gave the highest yield of 2-(phenylthio)ethanol (100%), while reaction with propylene carbonate a highest yield of regioselective product 1-(phenylthio)propan-2-ol was obtained (97%). Enantiomerically pure 1,2-propylene carbonate gave highly regioselective and stereospecific phenylthiopropanol, demonstrating that original chirality of propylene carbonate is retained. A plausible mechanism has been proposed for zeolite-catalyzed transformation involving a chemoselective nucleophilic attack of thiophenoloxide ion onto the less-substituted carbon of cyclic carbonate. The Na-X zeolite catalyst is recyclable and provides advantages of green chemistry approach to the synthesis of β-hydroxy sulfides without the use of any solvent.     

Selective methane chlorination to methyl chloride by zeolite Y-based catalysts

The CH₄ chlorination over Y zeolites was investigated to produce CH₃Cl in a high yield. Three different catalytic systems based on Y zeolite were tested for enhancement of CH₄ conversion and CH₃Cl selectivity: (i) HY zeolites in H⁺-form having various Si/Al ratios, (ii) Pt/HY zeolites supporting Pt metal nanoparticles, (iii) Pt/NaY zeolites in Na⁺-form supporting Pt metal nanoparticles. The reaction was carried out using the gas mixture of CH₄ and Cl₂ with the respective flow rates of 15 and 10 mL min⁻¹ at 300–350 °C using a fixed-bed reactor under a continuous gas flow condition (gas hourly space velocity = 3000 mL g⁻¹ h⁻¹). Above the reaction temperature of 300 °C, the CH₄ chlorination is spontaneous even in the absence of catalyst, achieving 23.6% of CH₄ conversion with 73.4% of CH₃Cl selectivity. Under sufficient supplement of thermal energy, Cl₂ molecules can be dissociated to two chlorine radicals, which triggered the C-H bond activation of CH₄ molecule and thereby various chlorinated methane products (i.e., CH₃Cl, CH₂Cl₂, CHCl₃, CCl₄) could be produced. When the catalysts were used under the same reaction condition, enhancement in the CH₄ conversion was observed. The Pt-free HY zeolite series with varied Si/Al ratios gave around 27% of CH₄ conversion, but there was a slight decrease in CH₃Cl selectivity with about 64%. Despite the difference in acidity of HY zeolites having different Si/Al ratios, no prominent effect of the Si/Al ratios on the catalytic performance was observed. This suggests that the catalytic contribution of HY zeolites under the present reaction condition is not strong enough to overcome the spontaneous CH₄ chlorination. When the Pt/HY zeolite catalysts were used, the CH₄ conversion reached further up to 30% but the CH₃Cl selectivity decreased to 60%. Such an enhancement of CH₄ conversion could be attributed to the strong catalytic activity of HY and Pt/HY zeolite catalysts. However, both catalysts induced the radical cleavage of Cl₂ more favorably, which ultimately decreased the CH₃Cl selectivity. Such trade-off relationship between CH₄ conversion and CH₃Cl selectivity can be slightly broken by using Pt/NaY zeolite catalyst that is known to possess Frustrated Lewis Pairs (FLP) that are very useful for ionic cleavage of H₂ to H⁺ and H⁻. Similarly, in the present work, Pt/NaY(FLP) catalysts enhanced the CH₄ conversion while keeping the CH₃Cl selectivity as compared to the Pt/HY zeolite catalysts.     

The catalytic reduction of nitrobenzene at the [MoVIO2(O2CC(S)(C6H5)2)2]2− complex intercalated in a Zn(II)–Al(III) layered double hydroxide host: A kinetic model for the molybdenum–pterin binding site in nitrate reductase

The heterogeneous reduction of nitrobenzene by thiophenol catalyzed by the dianionic bis(2‐sulfanyl‐2,2‐diphenylethanoxycarbonyl) dioxomolybdate(VI) complex, [Mo^VIO₂(O₂CC(S)(C₆H₅)₂)₂]²⁻, intercalated into a Zn(II)–Al(III) layered double hydroxide host [Zn_3−xAl_x(OH)₆]^x+, has been investigated under anaerobic conditions. Aniline was found to be the only product formed through a reaction consuming six moles of thiophenol for each mol of aniline produced. The kinetics of the system have been analyzed in detail. In excess of thiophenol, all reactions follow first‐order kinetics (ln([PhNO₂]/[PhNO₂]₀) = −k_appt) with the apparent rate constant k_app being a complex function of both initial nitrobenzene and thiophenol concentrations, as well as linearly dependent on the amount of solid catalyst used. A mechanism for this catalytic reaction consistent with the kinetic experiments as well as the observed properties of the intercalated molybdenum complex has thiophenol inducing the initial coupled proton–electron transfer steps to form an intercalated Mo^IV species, which is oxidized back to the parent Mo^VI complex by nitrobenzene via a two‐electron oxygen atom transfer reaction that yields nitrosobenzene. This mechanism is widespread in enzymatic catalysis and in model chemical reactions. The intermediate nitrosobenzene thus formed is reduced directly by excess thiophenol to aniline. The values of rate coefficients indicate that reduction of nitrobenzene proceeds much faster than proton‐assisted oxidation of thiophenol. This may account for the observation that the presence of protonic amberlite IR‐120(H) increases considerably the rate of the overall reaction catalyzed. Activation parameters in excess of the protonic resin and PhSH were ΔH^≠ = 80 kJ mol⁻¹ and ΔS^≠ = −70 J mol⁻¹ K⁻¹. The large negative activation entropy is consistent with an associative transition state. The present system is characterized by a well‐defined catalytic cycle with multiple‐turnovers reductions of nitrobenzene to aniline without appreciable deactivation. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 212–224, 2001     

Calix[4]arenes Bridged with Two Different Crown Ether Loops: Influence of Crown Size on Metal Ion Recognition

A series of calix[4]arene-bis-crownethers were synthesized in a fixed 1,3-alternateconformation with good yields by the reaction of amonocyclic calixcrown ether with multi-ethyleneglycoldi-p-toluenesulfonate in the presence of cesiumcarbonate. In the preparation of the monocycliccalixcrown ethers (1 and 2), the use ofpotassium carbonate as a base provided the best yieldregardless of the template concept. In two phaseextraction and competitive transport experiments forligand-metal complexation, calix[4]arene biscrown(5) provided the best selectivity for potassiumion. When a calixbiscrown ether (4) bearingdifferent sized crown ether loops coordinates to K⁺and Cs⁺, respectively, the changes of peak splittingpatterns and chemical shift on ¹H NMR spectra aredependent on the complexed metal ion species.     

两种邻、间手性二醇的区域选择性取代反应研究

对两种邻、间手性二醇的区域选择性取代反应进行了研究. 以(R)-(－)-1,3-丁二醇(1)为起始原料, 在各种有机碱存在下, 先合成C¹-位单磺酸酯, 进行C¹-位的单醚化取代, 均有非区域选择性的单(双)取代物生成. 若用SOCl₂处理1, 使其首先生成环状亚硫酸酯中间体5, 苯硫酚在2% Na₂CO₃存在下可和其发生高区域选择性取代反应, 生成 (R)-(－)-3-羟基-丁基苯硫醚(3). 以同样的方法使(S,R)-(＋)-1-(6-氟-2-色满基)-1,2-乙二醇(6)和SOCl₂反应生成环状亚硫酸酯(9), 再和苄胺反应, 也可发生高区域选择性取代, 生成 (S,R)-(＋)-2-苄氨基-1-(6-氟-2-色满基)-乙醇(8). 该反应方法具有高区域选择性, 产物有高旋光纯度、高产率.     

ELIMINATION OF THIOPHENOL FROM PHENYL ORTHOTHIOESTERS IN THE MASS SPECTROMETER AND NOVEL REARRANGEMENT OF KETENE THIOACETALS UPON ELECTRON IMPACT

Abstract

The mass spectra of four selected phenyl orthothioesters (1–4) have been measured. The obtained spectra revealed the conversion of the compounds (1–4) into ketene thioacetals (5–8) via the elimination of thiophenol in the mass spectrometer. The thermal nature of the process was confirmed and the mass spectra of ketene thioacetals (5–8) have been discussed. A novel fragmentation path for ketene thioacetals was suggested.     

Extraction of Co(II) and Ni(II) ammine cations from aqueous solutions into chloroform by highly lipophilic crown carboxylic acids

The proton-ionizable crown ethers, 2-[(sym-dibenzo-14-crown-4)oxy]-decanoic acid (1), 2-[sym-dibenzo-16-crown-5)oxy]decanoic acid (2), and 2-[sym-dibenzo-19-crown-6)oxy]decanoic acid (3) efficiently extract Co(II) and Ni(II) ammine cations from highly alkaline aqueous solutions (pH>10) into chloroform. For extractions of the individual metal species,2 is more efficient than1 or3. In competitive extraction systems, good selectivity for Co(II) ammine cations over Ni(II) ammine cations is observed.     

Reaction of aziridinecar☐ylic acids with thiols in aqueous solution. the formation of β-amino acid

Enantiomers of 3-methyl-2-aziridinecar☐ylic acids (1-d and 1-l) and 2-aziridinecar☐ylic acids (2-d and 2-l) reacted easily with thiophenol, cysteine and glutathione in aqueous solution or in sodium phosphate buffer solution at room temperature and gave predominantly β-amino acid derivatives with sulfur substituents at their α-position.From 1-d and thiophenol, (2S, 3R)-3-amino-2-phenylthiobutanoic acid (3-d) was produced predominantly. In order to confirm the structure, 3-d was converted to (3S, 4R)-3-phenylthio-4-methylazetidin-2-one (5) using the Ohno reaction. The configurations of 3-d and 6 were determined by X-ray diffraction and ¹³C NMR spectrum analysis, respectively. We concluded that the ring-opening reaction of unactivated aziridinecar☐yhc acids with thiols in aqueous solution occurred predominantly on C-2 of the aziridine ring with inversion of the configuration at this position. The reaction offers a good route for stereoselective synthesis of peptides or β-lactam derivatives.     

1,6-Additionen an 3-Methyl-5-methyliden-2-(5H)-furanon-Derivate

1,6-Additions to 3-Methyl-5-methylidene-2(5H)-furanone Derivatives The anions of thiophenol, methyl malonate and malononitrile react with 3-methyl-5,6-dihydro-2 (4H)-benzofuranone ( 1c ) by the formation of the corresponding 1,6-addition products cis- 5c (63%), trans- 6 (42%) and trans- 7 (76%), respectively. Likewise, the reaction of 3-methyl-5-methylidene-2 (5H)-furanone ( 1b ) with thiophenol yields the 1,6-addition product 5b (66%), and with the sodium salt of methyl aceto-acetate the 1,6-addition product 8 (11%) and the dispiro-dilactone 9 (39%).     

Nitropyrazoles 22. On reactivity of 3,5-dinitro-4-(phenylsulfonyl)pyrazole and its N-methyl derivative

3,5-Dinitro-4-(phenylsulfonyl)pyrazole (5) obtained by oxidation of 3,5-dinitro-4-(phenylthio)pyrazole with 30% H₂O₂ in AcOH was involved into nucleophilic substitution reaction with thiophenol, which proceeded with substitution of the phenylsulfonyl group at position 4. N-Methyl-3,5-dinitro-4-(phenylsulfonyl)pyrazole obtained by methylation of 5 with dimethyl sulfate was involved into nucleophilic substitution reaction with thiophenol, p-bromophenol, and morpholine with the regioselective substitution of the nitro group at position 5 to form 5-R-3-nitro-4-(phenylsulfonyl)pyrazoles.     

Synthesis and Screening Antimicrobial Activities of Novel 1,3-Diaryl-3- (Phenylthio)Propan-1-One Derivatives

Abstract

In this study, a series of novel β-mercapto carbonyl derivatives (3a–j) was prepared by addition of thiophenol (2) to chalcones (1a–j) in the presence of catalytic amount of iodine (10 mol%) in CH₂Cl₂. Antibacterial and antifungal in vitro properties of the synthesized compounds were tested against some human pathogenic microorganisms by employing the disk diffusion technique. For the most active compounds, also minimum inhibitory concentrations (MICs) were determined.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Synthesis of Azafluorenones using Zeolites.

A convenient method for the synthesis of various azafluorenones (2a-f & 4a-d) by cyclization of substituted arylpyridines (1a-f & 3a-d) using zeolites are described.     

An Efficient Acylation of Free Glycosylamines for the Synthesis of N-Glycosyl Amino Acids and N-Glycosidic Surfactants for Membrane Studies

Abstract

Treatment of free glycosylamines with 3-acyl-5-methyl-1,3,4-thiadiazole-2 (3H)-thiones 6 or with acids and 5-methyl-2-thioxo-1,3,4-thiadiazole-3(2H)-carbothioic acid S-(5-methyl-1,3,4-thiadiazol-2-yl) ester 7 in hydroorganic media afforded N-acylglycosylamines in high yields and without any competitive deglycosylation. This reaction found applications in the synthesis of N-glycopeptide building blocks and of glycosidic non ionic surfactants. Results concerning surface activities of two N-acylglycosylamines are reported. The new non ionic N-octanoyl-β-D-glucosylamine surfactant exhibited efficacy and selectivity in the extraction of membrane proteins, enhanced the activity of a membrane succinate dehydrogenase and proved thus useful for membrane studies.     

Simple approach to access tricyclic spiro dihydrofurans in a one-pot reaction

A simple and efficient one-pot protocol is accomplished to access tricyclic spiro dihydrofurans (4) by the reaction of β-enamino ketones (1) and dimedone (2) in ethanol followed by sequential addition of N-chlorosuccinimide at ambient temperature for the first time. The selectivity in desired product formation in good yields is the advantage of this protocol.     

Synthesis and reactivity of a novel hydridocobalt(III) complex containing trimethylphosphine and thiophenolato ligands

The novel hydridocobalt(III) complex [mer-Co(H)(SPh)₂(PMe₃)₃] (1) was prepared by reaction of thiophenol with [Co(PMe₃)₃Cl], [Co(PMe₃)₄] and [Co(PMe₃)₄Me]. A dinuclear cobalt dithiophenolato complex [Co(PMe₃)₂(SPh)]₂ (2) was obtained from the reaction of thiophenol with [Co(PMe₃)₄Me]. Reaction of 1 with iodomethane afforded complex [Co(PMe₃)₃(I)₂] (3). Reaction of complex 2 with carbon monoxide gave a mononuclear dicarbonyl cobalt(I) complex [Co(PMe₃)₃(CO)₂(SPh)] (4). The crystal structures of 1-4 were determined by X-ray diffraction. Formation mechanism of 1 is discussed.     

Liquid-phase synthesis of isopulegol from citronellal using mesoporous molecular sieves mcm-41 and zeolites

Isopulegol (IPG) was synthesized from citronellal (CTN) at atmospheric pressure and 40~60°C in a batch reactor by using mesoporous molecular sieves MCM-41 as well as zeolites HZSM-5 and Hβ. The catalysts were characterized by the methods of XRD, N₂ adsorption, ²⁷Al and ²⁹Si MAS-NMR and TPD of ammonia. Under our reaction conditions, Al-MCM-41 was found to be the best catalyst; it exhibited much higher activity, despite slightly lower IPG selectivity. The catalytic results depend on a variety of factors, viz. the acidity, the pore size and the pore channel of catalysts. The reaction paths were proposed and the kinetic parameters for competitive first order reactions of CTN were estimated. This revised version was published online in June 2006 with corrections to the Cover Date.     

Three-Component Reaction of β-Ketosulfone,Formaldehyde, and Thiol or Thiophenol in Water

Abstract

A three-component reaction of β-ketosulfone, formaldehyde, and thiol or thiophenol was developed. The reaction was performed in pure water under a catalyst-free condition, and the corresponding Mannich-type thioethers were obtained in good to excellent yields. Finally, a one-pot stepwise four-component reaction of sodium benzenesulfinate, α-bromoketone, β-ketosulfone, and thiophenol was also developed.     

An Efficient Approach to the 2-Nonulosonic Acid Skeleton Through a Hetero-Diels-Alder Reaction

Abstract

The hetero-Diels-Alder reaction of 1,3-diene-polyols with glyoxylates is an expeditious way to build up the skeleton of ulosonic acids. This paper reports an efficient means to improve the yields and the stereoselectivity associated with the hetero-cycloaddition of the activated 1,3-diene, 2S,3S-4E-1-O-Benzyl-2,3-O-isopropylidene-6-ter-butyldimethylsilyloxyhepta-4,6-diene-1,2,3-triol (3) with the dienophile ethyl glyoxylate. The effects of temperature, catalyst, and solvent on the outcome of the Diels-Alder reaction were investigated. The cycloaddition can proceed smoothly even at ?78°C and the complex bis [3-(heptafluorobutyryl)camphorato]oxovanadium (8) was found to be a very efficient catalyst for the cycloaddition reaction. The satisfactory selectivity (endo/exo: 97:3 and re/si: 82:18) observed in this catalytic reaction shows that there is a match effect between the substrate and catalyst.     

Über die Umsetzung von 2-Methyl-2,5-diphenyl-imidazolin-4-thion und 2-Methyl-2,5-diphenyl-4-chlor-2H-imidazol mit aliphatischen und aromatischen Aminen,Alkoholen und Phenolen

Zusammenfassung Aliphatische Amine bzw. Alkohole reagiren (in Gegenwart von PbO) mit 2-Methyl-2,5-diphenyl-imidazolin-4-thion (1) glatt zu 4-Alkylamino-2H-imidazolen (2 a-f, 7) bzw. 4-Alkoxy-2H-imidazolen (9 a-g). Die Darstellung von 4-Arylamino-2H-imidazolen (4 a-j) bzw. 4-Aroxy-2H-imidazolen (10 a-t) gelingt in guten Ausbeuten durch Umsetzung von 2-Methyl-2,5-diphenyl-4-chlor-2H-imidazol (3) mit aromatischen Aminen in siedenden Lösungsmitteln (Petroläther, Aceton) bzw. mit Phenolen in siedendem Aceton in Gegenwart von HCl-Acceptoren (K₂CO₃, Dabco). Die Umsetzung von3 mit Anthranilsäure liefert in 83proz. Ausbeute 1-Methyl-1,3-diphenyl-1H, 9H-imidazo[5,1-b]chinazolin-9-on (6). Aus3 und Thiophenol erhält man glatt 2-Methyl-2,5-diphenyl-4-phenylthio-2H-imidazol (11).

---

On the reaction of 2-Methyl-2,5-diphenyl-imidazoline-4-thione and 2-Methyl-2,5-diphenyl-4-chloro-2H-imidazole with aliphatic and aromatic amines, alcohols and phenols (joint action of elemental sulfur and gaseous ammonia upon ketones, LXXVI

Aliphatic amines and alcohols (in the presence of PbO) easily react with 2-methyl-2.5-diphenyl-imidazoline-4-thione (1) to 4-alkylamino-2H-imidazoles (2 a-f, 7) and 4-alkoxy-2H-imidazoles (9 a-g), resp. 4-arylamino-2H-imidazoles (4 a-j) are prepared in good yields by the reaction of 2-methyl-2.5-diphenyl-4-chloro-2H-imidazole (3) with aromatic amines under reflux in light naphtha or acetone; in the same manner 4-aroxy-2H-imidazoles (10 a-t) are obtained from3 and phenols in boiling acetone in the presence of HCl-acceptors (K₂CO₃, Dabco). Reaction of3 with anthranilic acid leads to1-methyl-1.3-diphenyl-1H.9H-imidazo[5.1-b]chinazoline-9-one (6) in 83% yield. By reaction of thiophenol with3 2-methyl-2.5-diphenyl-4-phenylthio-2H-imidazole (11) is easily obtained.

---

---

Herrn Prof. Dipl.-Ing., Dr. techn., Dr. e. h.Otto Kratky zum 70. Geburtstag herzlichst gewidmet.

---

Teil der DiplomarbeitJ. Gräber, Techn. Hochschule Aachen, 1970.

---

Teil der DiplomarbeitU. Lames, Techn. Hochschule Aachen, 1971.     

Homogeneous Catalytic Oxidation of Cyclohexene by Nitro Complexes of Copper(II)

This work describes the preliminary study of the homogeneous oxidation reaction of cyclohexene by nitro complexes of copper(II), Cu(CH₃CN)₂(NO₂)Cl (1) and Cu(CH₃CN)₂(NO₂)₂ (2) in acetonitrile, under oxygen pressure (20 atm) at 70 and 100°C. The results show the formation of 2-cyclohexen-1-one and 1,2-epoxyhexane-3-one as main reaction products. Also, it was observed that the oxidation reaction at 100°C with complexes 1 and 2 becomes more selective to the formation of 2-cyclohexene-1-one although the activity of both catalyst decreases.