Selective oxidation of sulfurs and oxidation desulfurization of model oil by 12-tungstophosphoric acid on cobalt-ferrite nanoparticles as magnetically recoverable catalyst

Silica-coated CoFe2O4 nanoparticles were prepared and used as a support for the immobilization of 12-tungstophosphoric acid, to produce a new magnetically separable catalyst. This catalyst was characterized using X-ray diffraction, wavelength-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, laser par-ticle size analysis, and vibrating sample magnetometry. The catalyst showed high activity in the selective oxidation of thioethers and thiophenes to the corresponding sulfones under mild condi-tions. The catalytic activity of the nanocatalyst in the oxidative desulfurization of model oil was investigated. The effect of nitrogen-containing compounds on sulfur removal from the model oil was also evaluated. The catalyst showed high activity in the oxidative desulfurization of diesel. The cata-lyst can be readily isolated from the oxidation system using an external magnet and no obvious loss of activity was observed when the catalyst was reused in four consecutive runs.     

温度和剂油比对汽油催化裂化脱硫的影响

Increasingly stringent regulations on environmental protection make gasoline desulfurization be a major concern for the present refineries. Accordingly, we proposed an original idea of sulfur reduction by catalytic cracking of FCC gasoline and simultaneously converting most sulfur of sulfides to H 2S. Some progress has been made in exploitation of the catalysts. In this paper, the effect of temperature and catalyst/oil ratio on the FCC gasoline desulfurization over two catalyst samples via catalytic cracking was discussed. The optimum temperature range is 400～420 ℃ for sulfur removal with relatively low cracking loss of gasoline. The highest sulfur removal percentage of 70% can be achieved with a liquid yield of more than 96%. The catalyst samples have higher desulfurization activity and selectivity for the sulfide cracking. In addition, both the gasoline yield and the sulfur content of the desulfurized gasoline decrease with the catalyst/oil ratio.     

Selective Oxidation of Toluene with Hydrogen Peroxide Catalyzed by V-Mo-based Catalyst

The selective catalytic oxidation of toluene with hydrogen peroxide over V-Mo-based catalysts under mild conditions was studied.The promotion effect of Mo on the catalysts was studied with V/Al2O3 and Mo/Al2O3 as reference samples.The catalysts were characterized by XRD,TPR,and XPS techniques.The results show that the addition of Mo to V/Al2O3 may change the distribution of V species on Al2O3 surface.Over V-Mo/Al2O3 catalyst,highly dispersed amorphous V species facilitates benzaldehyde formation,and crystalline V2O5 species increases the conversion of toluene but decreases the selectivity to benzaldehyde,while AlVMoO7 species favors both the conversion of toluene and the formation of cresols.The yield of benzaldehyde depends remarkably on the surface O/Al and Mo/V atomic ratios,and gets to a maximum value of 13.2% with a selectivity of 79.5% at an O/Al atomic ratio of 3.0 and Mo/V atomic ratio of 0.7.     

用于甲烷水蒸气重整的镍基催化剂的失活和再生

The deactivation of nickel catalysts used in Arak and Razi petrochemical complexes followed by catalyst regeneration was evalu-ated. The characterization of the different structures was made by powder X-ray diffraction(XRD),scanning electron microscopy(SEM),energy dispersive X-ray spectroscopy(EDS),transmission electron microscopy(TEM),and carbon & sulfur analyzer. The Ni particle size was estimated from XRD patterns and TEM graphs. The agglomeration of nickel particle and the poison by sulfur components were recognized as the main reasons in deactivation of Arak and Razi catalysts,respectively. The activity of the used catalysts before and after regeneration was measured on methane steam reforming at a CH4:H2O ratio of 1:3 at 850 oC. The regeneration processes for Arak and Razi samples were performed with CO2 as an oxidative atmosphere and steam as a regenerating agent,respectively. The results show that,(1) no residual sulfur components were on the regenerated Razi catalyst surface without changing the structure of the catalyst and the regenerated catalyst has gained 80% of its catalytic activity,and that(2) the nickel particle size of regenerated Arak specimen decreased remarkably as measured by Debye-Scherrer equation from XRD patterns. TEM images were in agreement with the XRD results and indicated a decrease in nickel particle size of regenerated catalyst. Additionally,in both regenerated catalysts all the coke on the surface of the support was eliminated after regeneration.     

Selective oxidation of ethane to aldehydes over SBA-15 supported molybdenum catalyst

SBA-15 supported Mo catalysts （Moy/SBA-15） were prepared by an ultrasonic assisted incipient-wetness impregnation method. The physical and chemical properties of the catalysts were characterized by means of N2-adsorption-desorption, XRD, TEM, UV-Vis, Raman, XANES and H2-TPR. The results showed that a trace amount of MoO3 was produced on high Mo content samples. Tum-over frequency （TOF） and product selectivity are dependent on the molybdenum content. Both Mo0.75/SBA-15 and Mo1.75/SBA-15 catalysts give the higher catalytic activity and the selectivity to the total aldehydes for the selective oxidation of C2H6. At the reaction temperature of 625℃, the maximum yield of aldehydes reached 4.2% over Mo0.75/SBA-15 catalyst. The improvement of the activity and selectivity was related with the state of MoOx species.     

The effects of Te on the performance of Mo-V catalysts prepared by hydrothermal synthesis

Some Mo-V-Te-La catalysts with varied component were prepared by hydrothermal synthesis and dried with microwave method. The component of the catalyst were greatly affected the crystal structure and Raman spectrum. The phase in the catalysts was different when the Mo, V, and Te content varied. When the catalyst containing the same Mo, V content, due to the effect of dopant of Te element (V0.07 Mo0.93)5O14 became the main phase in the catalyst. The catalyst also showed good activity for the reaction of selective oxidation propane to acrolein and acrylic acid.     

Application of Catalytic Wet Air Oxidation to Treatment of Landfill Leachate on Co／Bi Catalyst

Catalytic wet air oxidation(CWAO) was employed to reduce the organic compounds in landfill leachate and the effects of temperature, oxygen pressure, catalyst dosage, and concentration of the organic compounds on the TOC and CODcr removal rates were studied. The degradation kinetics of landfill leachate was also investigated and an exponential experiential model consisting of four influential factors was established to describe the reduction of the organic compounds in the landfill leachate. Meanwhile, the GC-MS technique was used to detect the components of the organic intermediates for the inference of the decomposition mechanisms of the organic compounds in landfill leachate. The results reveal that the reaction temperature and the catalyst dosage are the most important factors affecting the degradation reaction of the organic compounds and that the principal intermediates confirmed by GC-MS are organic acids at a percentage of more than 88% with no aldehydes or alcohols detected. The decomposition mechanisms of the organic compounds in landfill leachate were inferred based on the GC-MS information as follows;the activated gas phase O2 captured the hydrogen of the organic pollutants to produce free radicals, which then initiated the catalytic reaction. So most of the organic compounds were oxidized into CO2 and H2O ultimately. In general, catalytic wet air oxidation over catalyst Co3O4/Bi2O3 was a very promising technique for the treatment of landfill leachate.     

Egyptian heavy vacuum gas oil hydrotreating over Co-Mo/CNT and Co-Mo/γ-Al_2O_3 catalysts

The catalytic activity of CoMoS /CNT towards the Egyptian heavy vacuum gas oil hydrotreating was studied. The delivered CNT was functionalized with 6 mol /L HNO_3. The CNT were loaded with 12% MoO_3( by weight) and 0.7 Co /Mo atomic ratio with impregnation methods. The γ-Al_2O_3 catalyst was also prepared by impregnation method to compare both catalysts activities.The analysis tools such XRD,Raman spectroscopy,TEM,and BET were used to characterize the catalysts. The autoclave reactor was used to operate the hydrotreating experiments. The hydrotreating reactions were tested at various operating conditions of temperature 325-375 ℃,pressure 2-6 MPa,time 2-6 h,and catalyst /oil ratio( by weight) of 1 ∶75,1 ∶33 and 1 ∶10. The results revealed that the CoMoS /CNT was highly efficient for the hydrotreating more than the CoMoS /γ-Al_2O_3. Also, the hydrodesulfurization( HDS) increased with increasing catalyst /oil ratio. Additionally,results showed that the optimum condition was temperature 350℃,pressure 4 MPa,catalyst /oil ratio of 1 ∶75 for 2 h. Furthermore,even at low CoMoS /CNT catalyst /oil ratio of 1 ∶75,an acceptable HDS of 77.1% was achieved.     

Zr柱撑蒙脱土上负载稀土铈及铜铈催化剂的制备与表征

The Zr-pillaraed montmorillonite supported Ce and Cu-Ce catalysts were prepared by impregnation method. The performance of the catalysts was evaluated via the catalytic oxidation of volatile organic compounds (acetone, ethyl acetate, and toluene). The results showed that after supporting with Ce and Cu-Ce, the catalysts had a better reducibility. Moreover, the surface areas of the samples were increased. In addition，it was found that the Zr-pillared montmorillonite supported Cu-Ce catalysts had a higher activity and the reaction temperature decreased by 150～200 ℃ compared with the sample without Cu-Ce modification.     

CeAlPO-5分子筛催化剂上二苯基甲烷选择性氧化生成二苯甲酮(英文)

Selective oxidation of diphenylmethane to benzophenone requires active and selective catalysts. The framework incorporation of cerium in AlPO-5 molecular sieves creates active cerium sites in isolation. These active sites are responsible for selective oxidation. Cerium incorporated AlPO-5 with different Al/Ce ratios were synthesized, and the vapor phase oxidation of diphenylmethane in air over these catalysts was studied at 250, 275, 300, 325, and 350 °C. The diphenylmethane conversion and selectivity for benzophenone were more than 90%. CeAlPO-5(25) was found to be more active than other catalysts. The stability of the catalyst was verified by the time on stream study which indicated steady diphenylmethane conversion and benzophenone selectivity. Hence framework incorporated CeAlPO-5 molecular sieves are stable and active catalysts for the selective oxidation of diphenylmethane.     

Deep Oxidative Desulfurization of Thiophenic Model Oil/Natural Gas Condensate Over Tungsten/Molybdenum Oxides Using H2O2 as Oxidant

Supported Na₂WO₄/ZSM5 as catalyst was used for deep oxidative desulfurization (ODS) of mixed thiophenic compounds model oil and natural gas condensate under mild conditions by using hydrogen peroxide as oxidant. A one factor at a time optimization strategy was applied for optimizing the parameters such as temperature, loading of catalysts, reaction time, type of extractant and oxidant to S‐compounds molar ratio. The corresponding products can be easily removed from the model by using MeCN as best extractant. Results showed highly catalytic activity of Na₂WO₄/ZSM5 for the oxidative removal of dibenzothiophene and mixed thiophenic model oil under atmospheric pressure at 75 °C in a biphasic system. By applying the ODS to mixed model/MeCN and gas condensate/MeCN, the conversion reached to 94 and 81 %, respectively, using 40 % loading Na₂WO₄/ZSM5 as catalysis under the optimal conditions. To investigate the oxidation and adsorption effects of gas condensate composition on ODS, effects of cyclohexene, 1,7‐octadiene, and o‐xylene were studied with different concentrations.     

Ultradeep desulfurization of model oil through the oxidative adsorption process using Dawson‐type polyoxometalates and graphene oxide multifunctional composites

Eight Dawson‐type polyoxometalates were successfully prepared and used in an octanal/air oxidative desulfurization (ODS) system for model oil. Among which, the classical 2:18 polyoxometalate K₆[α‐P₂W₁₈O₆₂]·14H₂O exhibited the best catalytic performance with a sulfur removal ratio of 99.63%. Then, K₆[α‐P₂W₁₈O₆₂]·14H₂O was supported on graphene oxide (GO) to afford K₆P₂W₁₈O₆₂/GO using the hydrothermal method. Due to the in situ adsorption of the supported catalysts in the ODS process, the sulfur removal ratio was 96.10% without extraction treatment. Compared with the octanal/air ODS system using pure GO as an adsorbent for the oxidation products, the sulfur removal ratio increased from 89.21 to 96.10%, and the n‐octanal/S molar ratio decreased from 24 to 4. To facilitate the recycling of the catalyst and avoid catalyst loss, K₆[α‐P₂W₁₈O₆₂]·14H₂O was supported on magnetic graphene oxide (mGO) to afford K₆P₂W₁₈O₆₂/mGO. The results showed that the supported catalyst could be easily recovered with the aid of an external magnetic field, while maintaining high catalytic activity during five cycles of reuse with little catalyst loss. Furthermore, all the prepared materials were analyzed by a series of characterizations, and the reaction mechanism of the studied system was proposed through contrast tests and GC‐MS characterization analysis.     

Promotion of oxidative desulfurization performance of model fuel by 3DOM Ce-doped HPW/TiO2 material

Phosphotungstic acid (HPW) supported on Ce-doped three-dimensional ordered macroporous (3DOM) TiO₂ catalysts are studied in catalytic oxidation desulfurization (ODS) of model oil. The structural and textural of as-synthesized catalysts are characterized by N₂ adsorption, XRD, Raman spectroscopy, SEM-EDS, TEM, FT-IR, XPS, UV–Vis and ICP. These results upheld the existence of periodically arranged macroporous structure of catalyst, with Keggin-type of HPW dispersed homogeneously on TiO₂ matrix. Among these 3DOM Ce-doped HPW/TiO₂ materials, catalyst with 15 wt.% cerium dosage exhibits best ODS performance, which oxidized 99.8% of dibenzothiophene (DBT) into corresponding sulfone within 40 min. The excellent ODS performance of 3DOM Ce-doped HPW/TiO₂ catalyst is related to the common influence of more oxygen vacancies produced by electron transformation between Ce³⁺ and Ce⁴⁺. The chemisorbed oxygen on the surface catalyst will facilitate the selective oxidation of sulfides to sulfones. Moreover, the 3DOM structure of catalyst will further promote the mass transfer of reactants and products on the pore channel. The as-prepared catalyst shows excellent reusability in the ODS system, no obviously decrease in catalytic activity even after 6 runs.     

Highly efficient mesoporous WO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/KIT-6 catalysts for oxidative desulfurization of dibenzothiophene with hydrogen peroxide

Oxidative desulfurization (ODS) of organic compounds containing sulfur element from a model oil was performed using tungsten oxide catalysts supported on mesoporous silica with cubic Ia3d mesostructure, well-defined mesopores (7.2 nm), high surface area (719 m²/g), and three-dimensional pore network (WO _x /KIT-6). The prepared WO _x /KIT-6 catalysts (5–20 wt% WO _x ) were characterized by X-ray diffraction analysis, N₂ sorption measurements, electron microscopy, H₂-temperature programmed reduction, Raman spectroscopy, and thermogravimetric analysis. Among the mesoporous catalysts, 10 wt% WO _x /KIT-6 exhibited the best catalytic performance. Sulfur-containing organic compounds, such as dibenzothiophene, 4,6-dimethyldibenzothiophene, and benzothiophene, were completely (100 %) removed from the model oil over 10 wt% WO _x /KIT-6 catalyst in 2 h. In addition, the catalyst could be reused several times with only slight decrease in catalytic activity.     

Hydrocracking of vacuum gas oil in the presence of catalysts NiMo/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–amorphous aluminosilicates and NiW/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–amorphous aluminosilicates

Supported nickel–molybdenum and nickel–tungsten hydrocracking catalysts prepared using a support that consists of 70% Al₂O₃ and 30% amorphous aluminosilicate were characterized by nitrogen and mercury porosimetry, IR spectroscopy of adsorbed CO, and high-resolution electron microscopy. The catalytic tests in hydrocracking of vacuum gas oil containing 3.39% sulfur showed that the nature of the hydrogenating component (NiMo or NiW) only slightly influences the vacuum gas oil conversion and the diesel fraction yield, but noticeable influences the properties of the diesel fraction obtained. The catalyst NiMo/Al₂O₃–amorphous aluminosilicates, compared to NiW/Al₂O₃–amorphous aluminosilicates, ensures lower sulfur content in the diesel fraction obtained, whereas the catalyst NiW/Al₂O₃–amorphous aluminosilicates allows obtaining a diesel fraction with lower content of polyaromatic compounds.     

吡啶离子液体催化作用下的FCC汽油烷基化脱硫

合成一种Brønsted酸性离子液体[BPY]HSO₄,采用红外光谱和核磁共振对其进行表征。以[BPY]HSO₄为催化剂,对FCC汽油进行烷基化脱硫,考察反应温度、反应时间和剂油质量比对脱硫效果的影响及脱硫前后FCC汽油性质的变化,并对[BPY]HSO₄进行了再生。结果表明,在反应温度为65 ℃、反应时间为90 min和剂油质量比为0.09的条件下,FCC汽油的硫含量从580.0 μg/g降至6.4 μg/g,脱硫率为98.90%,满足中国国Ⅴ车用汽油硫含量标准(<10 μg/g);脱硫前后硫分布变化表明,在[BPY]HSO₄的催化作用下,前170 ℃馏分油中硫化物大部分转移到后170 ℃重馏分中,重馏分中硫化物可采用加氢方法进行脱除;PONA组成变化表明,烷基化脱硫过程对FCC汽油的烃类组成影响较小,且脱硫前后辛烷值变化不大;[BPY]HSO₄经萃取再生后可循环使用。     

The determination of surface polarity of bismuth-molybdenum oxidation catalysts by gas chromatography

Summary The adsorption of aromatic and aliphatic hydrocarbons was investigated using gas chromatography on Bi₂O₃, MoO₃ and mixed Bi–Mo oxidation catalysts. As a measure of polarity of a catalyst, the difference between the chemical potential of aromatic and aliphatic hydrocarbons at the same surface concentration was used. The chemical potentials were estimated from elution chromatographic data. The data for C₆–C₉ methylbenzenes and C₆–C₁₂ n-alkanes were obtained in the temperature range 60–300°C in nitrogen as a carrier gas. Using air as carrier gas, introduction of water pulses on a catalyst does not change the elution characteristics. The elution of alkenes, alkynes, dienes and carbonyl compounds was disturbed by reaction of these compounds on the surface. The polarity of catalysts decreased in the order mixed Bi–Mo catalysts, MoO₃, Bi₂O₃. The polarities observed are compared with polarities of some other solids and liquids and the role of polarity of the surface in catalytic oxidation reactions is briefly discussed.     

Hexacyanoferrate‐based ionic liquids as Fenton‐like catalysts for deep oxidative desulfurization of fuels

Two hexacyanoferrate‐based ionic liquids, [C₄Py]₃Fe(CN)₆ and [C₁₆Py]₃Fe(CN)₆, were synthesized and characterized using Fourier transform infrared and mass spectroscopies and CHN analysis. They were employed as Fenton‐like catalysts in extraction and catalytic oxidative desulfurization of model oil with dibenzothiophene (DBT), benzothiophene (BT), 4,6‐dimethyldibenzothiophene (4,6‐DMDBT), 4‐methyldibenzothiophene (4‐MDBT) and 3‐methylbenzothiophene (3‐MBT) as substrates. Various polar solvents, such as ionic liquids, water and organic solvents, were applied to choose a suitable extractant. The results showed the removal of DBT reached 97.1% with [C₄Py]₃Fe(CN)₆ as a catalyst and 1‐n‐octyl‐3‐methylimidazolium hexafluorophosphate ([C₈mim]PF₆) as an extractant under optimal conditions. The activity of sulfur removal followed the order DBT > 3‐MBT > BT > 4‐MDBT >4,6‐DMDBT. The effect of water content on sulfur removal was investigated by adding various concentrations of H₂O₂. It was found that excess water had a positive effect on sulfur removal but the catalysts were less sensitive than [FeCl₄^?]‐based catalysts to water. The mechanism was studied using electron spin‐resonance spectroscopy and gas chromatography–mass spectrometry. O₂^?? may be the active oxygen species in the catalytic oxidative desulfurization process and the oxidation products of various sulfur compounds were the corresponding sulfoxides and sulfones. Copyright © 2016 John Wiley & Sons, Ltd.     

石墨相氮化碳负载磷钨酸杂化材料的制备及其氧化脱硫催化性能

以1-丁基-3-甲基咪唑溴离子液体([Bmim]Br)、磷钨酸(H_3PW_(12)O_(40))和g-C_3N_4为原料,采用原位沉淀法合成了负载型[Bmim]_3PW_(12)O_(40)/g-C_3N_4催化剂(BPWO/g-C_3N_4)。通过XRD、FT-IR、UV-vis、氮气吸附、TEM和XPS等手段对催化剂的形貌和结构进行了表征,并以二苯并噻吩(DBT)的正庚烷溶液为模拟油、过氧化氢为氧化剂,考察了各组分负载量、催化剂用量、氧/硫物质的量比(O/S)和反应温度变量等对其氧化脱硫效果的影响。结果表明,BPWO/g-C_3N_4具有Keggin型杂多阴离子结构特征,BPWO (20%)/g-C_3N_4催化剂具有最优的对DBT的氧化脱硫性能,在50℃、O/S物质的量比为6.0的条件下反应180 min,可以完全氧化浓度为800μg/g的含DBT模拟油。同时,该BPWO/g-C_3N_4催化剂具有良好的重复使用性能,循环使用八次后其对DBT的氧化活性没有明显降低。     

Theoretical Investigation of Reverse Water Gas Shift Reaction Catalyzed by Ruthenium Halogen Carbonyl Complexes

In this paper we present theoretical study of the reverse water gas shift (RWGS) reaction catalyzed by ruthenium halogen carbonyl complexes. Three mechanisms, including hydrogen chloride, formic acid and oxidation–reduction mechanism, have been explored by density functional theory. The calculations indicate that the oxidation–reduction mechanism contributes to the TDI and TDTS in the ESM TOF calculations. Bimetallic catalysts would be likely to be more highly active than monometallic catalyst for the RWGS reaction. Among bimetallic catalysts studied, both bimetallic catalysts [Ru(μ-Cl)Cl(CO)₃]₂ and [Ru(μ-CO)Cl(CO)₃]₂ shows higher activity than [Ru(μ-Cl)(CO)₄]₂ catalyst with [Ru(μ-CO)Cl(CO)₃]₂ considering as the most efficient catalyst for RWGS reaction.