活性艳红X-3B水溶液的光催化脱色及矿化过程研究

对染料活性艳红X-3B水溶液的光催化反应过程进行了初步研究.首先,利用紫外-可见吸收光谱、高效液相色谱和质谱对反应过程中溶液组成的变化进行了测试,并用重铬酸盐法测定了各反应时刻溶液的COD值;其次,使用红外吸收光谱对反应过程中催化剂表面的吸附物种进行了考察.研究结果表明,在本实验条件下,活性艳红X-3B水溶液的光催化脱色和矿化过程是同时进行的,脱色反应完成后,溶液中生成了难以降解的中间产物,致使矿化过程难以继续进行.     

阴离子型有机化合物在LDHs上的动力学和热力学研究

考察了水滑石焙烧产物MgAl-LDO吸附3种阴离子染料Acid Red 88(AR88)、Acid Orange 3(AO3)、Acid Violet 90(AV90)过程中的热力学和动力学机理,并在不同温度下探究该吸附过程的热力学参数。实验结果表明:MgAl-LDO对染料阴离子的吸附过程复合Langmuir吸附等温模型,且为自发、放热的过程。3种染料在MgAl-LDO上的吸附过程均符合准二级反应动力学模型,且该吸附过程是由MgAl-LDO与阴离子染料之间的反应速率控制而不是两者之间的扩散作用。计算所得的吉布斯自由能绝对值在7~15 kJ·mol-1,这主要是由染料阴离子与MgAl-LDHs层板的氢键作用产生,结合Materials Studio 5.5软件模拟染料分子在MgAl-LDHs上的排列分布,推测MgAl-LDO对阴离子染料的吸附机理是表面吸附(占优势)与层间插层的协同作用。     

胺基酚醛型吸附树脂对染料废水的吸附与脱色

研究了胺基酚醛型吸附树脂对4种水溶性染料酸性橙II,活性红R-3B、活性黑KN-B、活性翠蓝KN-G的吸附性能。探讨了浓度、温度等因素对染料吸附性能的影响。结果表明,吸附树脂对酸性橙II具有较好的吸附;升高温度有利于吸附;随染料浓度的增大,树脂的吸附量增加。吸附树脂对4种水溶性染料的吸附速率较快,达到吸附平衡所用时间较短。对模拟废水的脱色率均达到了95.7%以上。     

连续光催化净化染料废水放大实验的研究

本文设计研制了一套连续光催化净化染料废水的放大实验工艺流程并选用国产二氧化钛利用悬浮分散体系对染料酸性红G溶液和直接耐晒大红4BS工业废水进行连续降解。结果表明放大装置可使染料废水COD_cr降低并可脱色,催化剂能够良好分离并可回收再利用。     

阴离子型有机化合物在LDHs上的动力学和热力学研究

本文考察水滑石焙烧产物MgAl-LDO吸附3种阴离子染料AcidRed88（AR88）、AcidOrange 3（AO3）、AcidViolet90（AV90）过程中的热力学和动力学机理,并在不同温度下探究该吸附过程的热力学参数。实验结果表明：MgAl-LDO对染料阴离子的吸附过程复合Langmuir吸附等温模型,且为自发、放热的过程。3种染料在MgAl-LDO上的吸附过程均符合准二级反应动力学模型,且该吸附过程是由MgAl-LDO与阴离子染料之间的反应速率控制而不是两者之间的扩散作用。计算所得的吉布斯自由能绝对值在7~15kJ·mol^-1,这主要是由染料阴离子与MgAl-LDHs层板的氢键作用产生,结合MaterialsStudio 5.5软件模拟染料分子在MgAl-LDHs上的排列分布,推测MgAl-LDO对阴离子染料的吸附机理是表面吸附（占优势）与层间插层的协同作用。     

硅胶负载壳聚糖对水溶性染料脱色的正交试验

通过正交试验方法,用硅胶负载壳聚糖对直接耐晒兰、直接大红、直接艳红、直接深蓝、直接嫩黄五种水溶性染料进行脱色实验.对脱色的影响因素,如处理剂用量、pH值、搅拌时间、静置时间、染料颜色进行了探讨 确定了影响脱色效果的主次因素顺序,并绘制出硅胶负载壳聚糖对五种直接染料的吸附等温线,吸附等温线符合弗里德利希方程式 对直接耐晒兰的吸附方程式为:Γ=0.05·C0.36     

类水滑石主体层板与客体CO2-3、H2O间的超分子作用

通过构建类水滑石双层计算模型, 采用混合密度泛函B3LYP/6-31G(d)//B3LYP/3-21G方法计算类水滑石(LDHs-CO3-yH2O)的结构与能量, 探讨LDHs限域空间中客体阴离子及水分子的分布形态以及主客体超分子作用. 计算结果表明, 客体阴离子与水分子以平行层板的方式存在于水滑石层间. 主客体发生作用时, CO2-3的HOMO轨道向层板的LUMO轨道转移电子. 所形成的LDHs-CO3主客体作用要强于LDHs-F以及LDHs-Cl, 与其离子交换性能相一致. 水滑石去水结构(LDHs-CO3)水合过程, 氢键作用较静电作用更占优势, 并且layer-water型氢键要强于anion-water 型氢键. 此外, 水合能计算表明LDHs水合具有一定的饱和量.     

类水滑石主体层板与客体CO2-3、H2O间的超分子作用

通过构建类水滑石双层计算模型,采用混合密度泛函B3LYP/6-31G(d)//B3LYP/3-21G方法计算类水滑石(LDHs-CO3-yH2O)的结构与能量,探讨LDHs限域空间中客体阴离子及水分子的分布形态以及主客体超分子作用.计算结果表明,客体阴离子与水分子以平行层板的方式存在于水滑石层间.主客体发生作用时,CO2-3的HOMO轨道向层板的LUMO轨道转移电子.所形成的LDHs-CO3主客体作用要强于LDHs-F以及LDHs-Cl.与其离子交换性能相一致.水滑石去水结构(LDHs-CO3)水合过程,氢键作用较静电作用更占优势,并且layer-water型氢键要强于anion-water型氢键.此外,水合能计算表明LDHs水合具有一定的饱和量.     

水滑石无机阴离子交换剂的合成与表征

采用水热法制成了镁铝碳酸盐型、镁铝硝酸盐型、镁铝盐酸盐型、镁铝羟基型等插层镁铝类水滑石,比较了层间含不同阴离子类水滑石的结构差异和高温热处理后的结构稳定性.通过离子交换方式以镁铝羟基型为基材插层组装无机阴离子基团MoO42-、WO42-、CO32-和NO3-制得不同的阴离子插层类水滑石.通过XRD、TEM、XPS和热分析方法对镁铝类水滑石和阴离子插层类水滑石进行了表征.     

三种不同阳极上活性艳红X-3B的光电降

 分别以TiO2/Ti, SnxSb1-xO2/Ti和RuxPd1-xO2/Ti为阳极,钛网为阴极,NaCl为电解质,研究了活性艳红X-3B的光化学降解、电化学降解以及光电协同降解行为. 实验表明,经光电协同降解60 min后,三种电极体系中活性艳红X-3B的脱色率都超过了97%,三种电极上都存在显著的光电协同效应,即导体阳极与半导体阳极体系表现出相似的光电协同效应. SnxSb1-x-O2/Ti阳极体系先电解后光照和先光照后电解对比实验结果表明,电解生成的中间产物在光照3 min后使染料脱色率由17%迅速提高到75%,而先光照后电解则无此现象发生, 这说明电解中间产物经紫外光激发后对染料脱色有显著作用.     

脱水Ni-Fe类水滑石的制备及其作为环保型催化剂用于生物质糠醛的高选择性缩醛化反应

合成了含硝酸根离子的脱水Ni-Fe类水滑石（Ni-Fe HTLCs）并将其应用于室温下的糠醛缩醛化反应。脱水Ni-Fe HTLCs对糠醛缩醛化反应显示出高选择性并基本实现糠醛的完全转化。作为耐水的路易斯酸和脱水剂,脱水Ni-Fe HTLCs被证明是适用于糠醛缩醛化反应的高效双功能催化剂。通过研究发现,脱除Ni-Fe HTLCs中水分导致颗粒收缩并增强层板间硝酸根离子间的电荷互斥,Ni-Fe HTLCs中弱酸性位点在糠醛缩醛化中发挥重要作用,脱水可改变酸性位点结构并增强其活性。脱水Ni-Fe HTLCs可吸收缩醛化反应中产生的大部分水分,但吸水后Ni-Fe HTLCs的结构并不能完全恢复,这可能是由扩散进入HTLCs层板间的有机分子导致。     

A biosorption isotherm model for the removal of reactive azo dyes by inactivated mycelia of Cunninghamella elegans UCP542

The biosorption of three reactive azo dyes (red, black and orange II) found in textile effluents by inactive mycelium of Cunninghamella elegans has been investigated. It was found that after 120 hours of contact the adsorption led to 70%, 85%, 93% and 88% removal of reactive orange II, reactive black, reactive red and a mixture of them, respectively. The mycelium surface was found to be selective towards the azo dyes in the following order: reactive red > reactive black > orange II. Dye removal from a mixture solution resulted in 48.4 mg/g retention by mycelium and indicated a competition amongst the dyes for the cellular surface. A Freundlich adsorption isotherm model exhibited a better fit, thus suggesting the presence of heterogeneous binding sites. Electrondense deposits observed on the mycelium ultrastructure suggest that the dyes are mainly retained under the cellular surface of the inactive biomass of C. elegans.     

纳米管钛酸和二氧化钛的暗态吸附性能

研究了在暗态下纳米管钛酸,TiO2(A),P25TiO2对水溶液中活性艳红X 3B的吸附性能.结果表明,pH值不同时,三者对活性艳红X-3B的吸附量不同,分析了它们吸附性能不同的原因.     

羧基化石墨烯对4种离子型染料的吸附脱色

合成的羧基化石墨烯（G-COOH）用FT-IR进行表征,并对G-COOH用于水溶液中甲基紫、中性红、灿烂黄和茜素红4种离子型染料的吸附性能进行了研究。 考察了吸附剂用量、吸附时间、初始浓度以及溶液pH值等条件对吸附效果的影响。 同时,研究了甲基紫染料的脱附性能,结果表明,用NaOH/EtOH混合溶液洗脱甲基紫,洗脱率可达88.2%,洗脱后的G-COOH可再利用。 从热力学角度探讨得出,G-COOH对阳离子染料甲基紫和中性红的吸附行为能够较好的符合Langmuir等温吸附模型,而对阴离子染料灿烂黄和茜素红的吸附行为则能够较好的符合Freundlich等温吸附模型,计算的吸附参数表明,G-COOH对4种染料的吸附过程容易进行。 动力学研究表明,G-COOH对4种离子型染料的吸附行为均能较好的符合准二级吸附模型。 该实验研究表明,在处理染料废水时,G-COOH为相当优异的吸附剂。     

Hierarchical porous induced competent removal of low concentration azo dye molecules by generating a leachy crystalline structure H-MIL-53(Fe)

The development in technology of synthetic azo dyes, has led to excessive water resources pollution. Even at lower concentration they can impart the quality of water and human life. Herein, we have developed a novel synthesis strategy via introducing salicylic acid (SA) for the synthesis of a leachy crystalline material H-MIL-53(Fe) with hierarchical pores (HP) and exposed coordination unsaturated sites (CUS), which had higher surface area and larger pore volume than the as synthesized MIL-53(Fe). Due to these characteristics, H-MIL-53(Fe) was competent removal of orange G (OG, one of the frequently used azo dyes) with equilibrium in 300 min and the maximum adsorption capacity of 163.9 mg/g. The adsorption mechanism of OG onto H-MIL-53(Fe) was mostly based on electrostatic attraction between CUS of H-MIL-53(Fe) along with HP as active species to OG diffusion and bind. By comparing H-MIL-53(Fe) with other adsorbents for OG adsorption, it is undoubtedly that H-MIL-53(Fe) can be used as a promising adsorbent for OG removal from aqueous solutions.     

Fast and highly efficient removal of anionic organic dyes with a new Cu modified nanoclinoptilolite

Adsorption of anionic dyes onto most of zeolites with net negative charge may be restricted. In this article, a natural nanoclinoptilolite was modified with Cu and the obtained nanomaterial was used as an effective adsorbent for removal of methyl red as an anionic model azo dye up to 90% in 20 min.This new adsorbent was characterized utilizing X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. Also, effects of methyl red concentration, mass of sorbent and pH on the removal percent were examined. Moreover, the adsorption mechanism was investigated by plotting the Langmuir and Freundlich adsorption isotherms. The results showed that the data can be fitted with both models. The most adsorption capacity obtained from Langmuir isotherm was about 200 mg/g. Moreover, the Cu modified nanoclinoptilolite was successfully employed for adsorption of another anionic dye, bromothymol blue. The results confirmed that this new adsorbent can be effectively applied for removing of anionic dyes from waste waters.     

石莼吸附脱色处理水溶性染料

本文以大型海藻石莼作吸附剂，对结晶紫等7种不同结构的水溶性染料分子的单水溶液和模拟混合染料废水进行吸附脱色研究，探讨了吸附剂的性能和影响吸附脱色效果的有关因素。结果表明，石莼对大多数水溶性染料具有良好的吸附脱色效果，而且COD去除率高，在染料废水处理中应用前景广阔。     

Intercalation of paracetamol into the hydrotalcite-like host

Hydrotalcite-like compounds are often used as host structures for intercalation of various anionic species. The product intercalated with the nonionic, water-soluble pharmaceuticals paracetamol, N-(4-hydroxyphenyl)acetamide, was prepared by rehydration of the Mg-Al mixed oxide obtained by calcination of hydrotalcite-like precursor at 500 °C. The successful intercalation of paracetamol molecules into the interlayer space was confirmed by powder X-ray diffraction and infrared spectroscopy measurements. Molecular simulations showed that the phenolic hydroxyl groups of paracetamol interact with hydroxide sheets of the host via the hydroxyl groups of the positively charged sites of Al-containing octahedra; the interlayer water molecules are located mostly near the hydroxide sheets. The arrangement of paracetamol molecules in the interlayer is rather disordered and interactions between neighboring molecules cause their tilting towards the hydroxide sheets. Dissolution tests in various media showed slower release of paracetamol intercalated in the hydrotalcite-like host in comparison with tablets containing the powdered pharmaceuticals.     

Selective on-line immunoextraction coupled to liquid chromatography for the trace determination of benzidine, congeners and related azo dyes in surface water and industrial effluents.

A new extraction immunosorbent involving antigen-antibody interactions was coupled on-line to liquid chromatography for the selective extraction in aqueous samples of benzidine and congeners, widely used as intermediate compounds in the manufacturing of dyes and pigments. Due to the cross-reactivity of the antibodies for analytes with chemical structures closely related to that of the analyte used for immunization, the immunoextraction sorbent was shown to be able to extract aminoazobenzene and related azo dyes with good recoveries. The on-line coupling was optimized for the trace determination of benzidine, dichlorobenzidine, aminoazobenzene and some azo dyes with detection limits in the range 0.1 to 1 microgram/l. The high selectivity of the immunoextraction was shown by comparing the analysis of an industrial textile effluent obtained using precolumns packed either with a non-selective polymeric sorbent or with the anti-benzidine immunosorbent. In such complex samples, extraction and clean-up are achieved in the same step.