Physicochemical properties of 1-butyl-3-methylimidazolium acetate

Characteristic IR and UV absorption bands, as well as oxidation half-wave potential on a platinum disc electrode in the cyclic mode were determined for the low-temperature hydrophilic ionic liquid 1-butyl-3-methylimidazolium acetate. Temperature dependences of the refractive index, density, and ansolute viscosity were determined in the temperature range 298–328 K. The activation energy of viscous flow was calculated.     

Impact of 1-butyl-3-methylimidazolium chloride on the electrospinning of cellulose acetate nanofibers

Additives like ionic liquids (ILs) have proven to be excellent materials useful in improving the electrospinnability and conductivity of both synthetic and biopolymers. The aim of this study is to investigate the effect of 1-buthyl-3-methylimidazolium chloride [BMIM]Cl on the electrospinnability of cellulose acetate (CA). The results showed that [BMIM]Cl has the greater effect on viscosity and conductivity of the spinning solution while the morphology of the nanofibers significantly improved as the concentration of the IL increases from 0% to 12% (v/v) of [BMIM]Cl. To understand the interaction between CA and [BMIM]Cl, Fourier-transform infrared spectroscopy (FTIR) has been used. Observations by scanning electron microscopy (SEM) suggested that [BMIM]Cl significantly altered the morphology of the CA nanofibers and 12% (v/v) of [BMIM]Cl would be an ideal concentration producing uniform fibers with a mean diameter of 180nm. In addition, the membranes showed a significant increase in conductivity (from 0 to 2.21 × 10^?7S/cm) as the concentration of ionic liquid increases up to 12% (v/v) that indicates a successful loading of IL inside the nanofibers.     

Thermomechanical properties of composite films of polyacrylonitrile with chitin and chitosan

Composite films were prepared from polyacrylonitrile synthesized by anionic and radical polymerization and combined with chitin or chitisan. The thermomechanical properties of the films were examined. The compatibility of polyacrylonitrile synthesized by radical polymerization with chitosan was studied by DSC over a wide temperature range 140–280°C.     

Homogeneous tritylation of cellulose in 1-butyl-3-methylimidazolium chloride

1-Alkyl-3-methylimidazolium-based ionic liquids, having chloride as a counter ion, were studied for cellulose solubility; and the influence of different alkyl chain lengths was also investigated. The alkyl chain length was incrementally varied from ethyl to decyl to determine structure-dissolution properties; a distinct odd-even effect was observed for short chain lengths. In addition, the tritylation of cellulose was performed in 1-butyl-3-methylimidazolium chloride using pyridine as base. The influences of reaction time and the ratio of trityl chloride per cellulose monomer unit on the degree of substitution were investigated in detail by elemental analysis and 1H NMR spectroscopy. A DS of around 1 was obtained after 3 h reaction time using a six fold excess of trityl chloride.     

Thermodynamic properties of 1-butyl-3-methylpyridinium tetrafluoroborate

Pressure, density, temperature (p, ρ, T) data of 1-butyl-3-methylpyridinium tetrafluoroborate [C4mpyr][BF₄] at T = (283.15 to 393.15) K and pressures up to p = 100 MPa are reported with an estimated experimental relative combined standard uncertainty of Δρ/ρ = ±(0.01 to 0.08)% in density. The measurements were carried out with a newly constructed Anton-Paar DMA HPM vibration-tube densimeter. The system was calibrated using double-distilled water, methanol, toluene and aqueous NaCl solutions. An empirical equation of state for fitting of the (p, ρ, T) data of [C4mpyr][BF₄] has been developed as a function of pressure and temperature to calculate the thermal properties of the ionic liquid (IL), such as isothermal compressibility, isobaric thermal expansibility, differences in isobaric and isochoric heat capacities, thermal pressure coefficient and internal pressure. Internal pressure and the temperature coefficient of internal pressure data were used to make conclusions on the molecular characteristics of the IL.     

Thermochemical properties of 1-butyl-3-methylimidazolium nitrate

Heat capacity for 1-butyl-3-methylimidazolium nitrate [C₄mim][NO₃] in the temperature range (5–370) K has been measured by adiabatic calorimetry. Temperatures and enthalpies of its phase transitions have been determined. Thermodynamic functions have been calculated for the crystalline and the liquid states. Phase transition temperatures for set of nitrate salts have been compared. Enthalpy of combustion and enthalpy of formation for crystalline [C₄mim][NO₃] have been determined using a static-bomb isoperibol combustion calorimeter. A correlation scheme for the estimation of C_p of ionic liquids has been developed.     

On the spontaneous carboxylation of 1-butyl-3-methylimidazolium acetate by carbon dioxide

The formation of 1-butyl-3-methylimidazolium-2-carboxylate in the mixture of CO(2) with 1-butyl-3-methylimidazolium acetate under mild conditions (298 K, 0.1 MPa) has been put in evidence in the liquid phase using Raman and infrared spectroscopy complemented by DFT calculations and NMR ((1)H, (13)C, (15)N) spectroscopy.     

Anomalous conformational change in 1-butyl-3-methylimidazolium tetrafluoroborate-D2O mixtures

We have investigated the effect of deuterated water on the conformational equilibrium between the gauche and trans conformers of the [bmim] cation in mixtures of water and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]), an ionic liquid, at room temperature. A comparison of the results obtained from solutions made with H(2)O and with D(2)O highlights an anomalous conformational change in the D(2)O solution showing an extended N-shaped behavior. The gauche conformer of the [bmim] cation in D(2)O increased up to x = ~50 (D(2)O mol %); however, it decreased up to higher water concentrations of x = ~85 before again increasing drastically toward x = ~100. We provide spectroscopic evidence that the anomalous conformational dynamics of the [bmim] cation in D(2)O is directly related to the H/D exchange reaction of the C-H group at position 2 of the imidazolium ring.     

Structure and properties of regenerated cellulose/tourmaline nanocrystal composite films

Nanocomposite films were successfully prepared from cellulose and tourmaline nanocrystals with mean diameters of 70 nm in a 1.5 M NaOH/0.65 M thiourea aqueous solution by coagulation with 5 wt % CaCl₂ and then a 3 wt % HCl aqueous solution for 2 min. The structure and properties of the composite films were characterized by X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and tensile testing. The results indicated that the tourmaline nanocrystals were dispersed in a cellulose matrix, maintaining the original structure of the nanocrystals in the composite films. The loss peaks (tan δ) in the DMA spectra and the decomposition temperatures in the DSC curves of the composite films were significantly shifted toward low temperatures, suggesting that the nanocrystals broke the partial intermolecular hydrogen bonds of cellulose, and this led to a reduction in the thermal stability. However, the nanocomposite films exhibited a homogeneous structure and dispersion of the nanocrystals. When the tourmaline content was in the range of 4–8 wt %, the composite films possessed good tensile strength (92–107 MPa) and exhibited obvious antibacterial action against Staphylococcus aureus. This work provides a potential way of preparing functional composite films or fibers from cellulose and nanoinorganic particles with NaOH/thiourea aqueous solutions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 367–373, 2004     

Application of the interstice model to structure characterization of 1-butyl-3-methylimidazolium acetate

The structure of ionic liquid 1-butyl-3-methylimidazolium acetate was characterized by experimental physical parameters and on the basis of the interstice model.     

Entropy of cellulose dissolution in water and in the ionic liquid 1-butyl-3-methylimidazolim chloride

The entropic driving forces of cellulose dissolution in water and in the ionic liquid 1-butyl-3-methylimidazolium chloride (BmimCl) are investigated via molecular dynamics simulations and the two-phase thermodynamic model. An atomistic model of cellulose was simulated at a dissociated state and a microfibril state to represent dissolution. The calculated values of entropy and internal energy changes between the two states inform the interplay of energetic and entropic driving forces in cellulose dissolution. In both water and BmimCl, we found that the entropy associated with the solvent degrees of freedom (DOF) decreases upon cellulose dissolution. However, solvent entropy reduction in BmimCl is much smaller than that in water and counteracts the entropy gain from the solute DOF to a much lesser extent. Solvent entropy reduction in water also plays a major role in making the free energy change of cellulose dissolution unfavorable at room temperature. In BmimCl, the interaction energies between solvent molecules and glucan chains and the total entropy change both contribute favorably to the dissolution free energy of cellulose. Calculations at different temperatures in the two solvents indicate that changes in total internal energy are a good indicator of the sign of the free energy change of cellulose dissolution.     

The undesirable acetylation of cellulose by the acetate ion of 1-ethyl-3-methylimidazolium acetate

Abstract  

The ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([C2mim]OAc) is considered to be an inert solvent of cellulose and lignocellulosic biomass. Acetylation (1.7% mol, or DS 0.017) of cellulose after dissolution in technical grade [C2mim]OAc (150 °C for 20 min), is demonstrated by compositional analysis, FTIR analysis and ¹³C NMR spectroscopy (in [C2mim]OAc with ¹³C enriched acetate). This acetylation, in the absence of added acylating agents, has not been reported before and may limit [C2mim]OAc utility in industrial scale biomass processing, even at this low extent. For example, cellulose acetylation may contribute to IL loss in processes where the IL is recovered and reused and inhibit enzyme saccharification of cellulose in lignocellulosic biofuel production processes based on saccharification and fermentation.     

Roles of xyloglucan and pectin on the mechanical properties of bacterial cellulose composite films

Xyloglucan and pectin are major non-cellulosic components of most primary plant cell walls. It is believed that xyloglucan and perhaps pectin are functioning as tethers between cellulose microfibrils in the cell walls. In order to understand the role of xyloglucan and pectin in cell wall mechanical properties, model cell wall composites created using Gluconacetobacter xylinus cellulose or cellulose nanowhiskers (CNWs) derived there from with different amounts of xyloglucan and/or pectin have been prepared and measured under extension conditions. Compared with pure CNW films, CNW composites with lower amounts of xyloglucan or pectin did not show significant differences in mechanical behavior. Only when the additives were as high as 60 %, the films exhibited a slightly lower Young’s modulus. However, when cultured with xyloglucan or pectin, the bacterial cellulose (BC) composites produced by G. xylinus showed much lower modulus compared with that of the pure BC films. Xyloglucan was able to further reduce the modulus and extensibility of the film compared to that of pectin. It is proposed that surface coating or tethering of xyloglucan or pectin of cellulose microfibrils does not alone affect the mechanical properties of cell wall materials. The implication from this work is that xyloglucan or pectin alters the mechanical properties of cellulose networks during rather than after the cellulose biosynthesis process, which impacts the nature of the connection between these compounds.     

Copolymerization of styrene with vinyl acetate in a construction petroleum bitumen medium and properties of obtained composite materials

The regularities of the copolymerization of styrene (Sr) with vinyl acetate (VA) in a construction petroleum bitumen (CPB) medium are studied. It is established that, in the bitumen medium, the superiority of styrene in terms of reactivity when compared to vinyl acetate is not expressed as critically as in the case of in-bulk copolymerization. Polymer-bitumen composite materials with improved operating performance as compared to bitumen were obtained by copolymerization.     

The changes of crystalline structure of cellulose during dissolution in 1-butyl-3-methylimidazolium chloride

The morphology and crystalline structure changes of cellulose during dissolution in 1-butyl-3-methylimidazolium chloride [(BMIM)Cl] were investigated by optical microscopy and synchrotron radiation wide-angle X-ray diffraction (WAXD). Neither swelling nor dissolution of cellulose was observed under the melting point of [BMIM]Cl. While the temperature was elevated to 70 °C, the swelling phenomenon of cellulose happened with the interplanar spacing of ( _boxclose_boxclose_boxclose0 1\bar{1}0 ) and (020) planes increased slightly. With the temperature further going up to 80 °C, cellulose was dissolved gradually with the crystallinity (W _c,x) and crystalline index (CrI) of cellulose decreased rapidly, which indicated the crystalline structure of cellulose was destroyed completely and transformed into amorphous structure.     

Osmotic and apparent molar properties of binary mixtures alcohol + 1-butyl-3-methylimidazolium trifluoromethanesulfonate ionic liquid

In this work, physical properties (densities and speeds of sound) for the binary systems {1-propanol, or 2-propanol, or 1-butanol, or 2-butanol, or 1-pentanol + 1-butyl-3-methylimidazolium trifluoromethanesulfonate} were experimentally measured from T = (293.15 to 323.15) K and at atmospheric pressure. These data were used to calculate the apparent molar volume and apparent molar isentropic compression which were fitted to a Redlich–Meyer type equation. This fit was used to obtain the corresponding apparent molar properties at infinite dilution. On the other hand, the osmotic and activity coefficients and vapor pressures of these binary mixtures were also determined at T = 323.15 K using the vapor pressure osmometry technique. The Extended Pitzer model of Archer was employed to correlate the experimental osmotic coefficients. From the parameters obtained in the correlation, the mean molal activity coefficients and the excess Gibbs free energy for the studied mixtures were calculated.     

Rheological properties of the aqueous mixtures of cationic-anionic surfactants

The rheological properties of the aqueous mixtures of cationic-anionic surfactants, both in single-phase systems and in aqueous two-phase systems, have been studied. Bizarre rheological properties —negative thixotropy, viscoelasticity and hihg viscosity of shear rate dependent at relatively low concentration — have been observed. An unusual viscosity change, that is, viscosity lowering with increasing concentration, was obtained. The negative thixotropy might be due to the existence of lamellar or sheet-like micelles, viscoelasticity might be induced by rodlike and lamellar or sheet-like micelles, the high viscosity might be a consequence of the formation of network by long rodlike micelles and the concentration-induced viscosity lowering could be interpreted in terms of the decrease of micellar dimensions with concentration.     

Viscosities and refractive indices of binary mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate and 1-butyl-2,3-dimethylimidazolium tetrafluoroborate with water at 298 K

Viscosities and refractive indices have been determined for (water + 1-butyl-3-methylimidazolium tetrafluoroborate) and (water + 1-butyl-2,3-dimethylimidazolium tetrafluoroborate) mixtures at 298.15 K, over the whole composition range. The refractive indices were compared with the predictions of the Lorentz–Lorenz, Wiener, and Gladstone–Dale equations. Viscosity deviations (Δη) and refractive index deviations (Δn_D) have been calculated and fitted to the Redlich–Kister polynomial equations. Δn_D are positive whereas Δη are negative over the entire mixture composition for the two salts. The influence of the structure of imidazolium cation on the above physicochemical properties was discussed.