Shape analysis of the velocity distribution in supersonic Ar beams: Comparison between experiment and theory

The shape parameters of the velocity distribution for beam densityF(v) = C($\text{v}\text{α}$)² exp[?($\text{v}\text{?}\text{u}\text{α}$)²]

from a supersonic expansion of Ar are determined both experimentally via time-of-light(TOF) analysis and computationally by solving the Boltzmann equation for a radial flow field via the method of moments. TOF spectra are recorded by means of the detection of metastable Ar atoms. This technique eliminates velocity discrimination in the detection process. Significance test and a sensitivity analysis for the experimental and theoretical results are included. The agreement of measured and calculated shape parameters is very good. Small-angle scattering of particles, travelling with small relative velocity along the same stream line, is still effective beyond the transition region to free molecular flow and continues to modify the distribution function. A primitive model that correlates the shape parameters c₃ and c₄ with the terminal speed ratio and describes their variation with the distance from the nozzlee is developed.     

Yield of I(2Psol:12) in the photodissociation of CH2I2

The production of I(²P_{$\text{1}\text{2}$}) in the photolysis of CH₂I₂ has been studied optoacoustically at excitation wavelengths between 365.5 and 247.5 nm. Bands found at 32200 and 47000 cm^?1 correlate with I(²P_{$\text{3}\text{2}$}) whilst those at 34700 and 40100 cm^?1, which correlate with I(²P_{$\text{1}\text{2}$}), give final ²P_{$\text{3}\text{2}$}/²P_{$\text{1}\text{2}$} ratios of 1.75 and 1.1, respectively, after curve crossing.     

The automatic amperometric and potentiometric microtitration of pharmaceutically important sulfanilamide derivatives by diazotization with nitrite

The automatic amperometric and potentiometric microtitration of pharmaceutically important sulfanilamide derivatives by diazotization with nitrite is described. Optimal conditions for diazotization and amperometric indication are discussed. A new cathodic amperometric indication of nitrite in M hydrochloric acid-25% ($\text{w}\text{v}$) of potassium bromide medium is proposed; the electrode processes involved are interpreted on the basis of current-potential curves. The effects of the hydrochloric acid and bromide concentrations, and of temperature on the limiting current are described. Sulfamethazine, sulfadimethoxine, sulfamethoxypyridazine and sulfamethoxypyrazine were titrated amperometrically in the range 10^?3–10^?6 M. Potentiometric titrations of these sulfanilamides were possible in the range 10^?3–10^?4 M.     

The importance of spin relaxation in the delayed fluorescence of molecular crystals

Deactivation rate constants of spin-orbital excited Br atoms in the reactions Br(²P_{$\text{1}\text{2}$}) + O₂ → Br(²P_{$\text{3}\text{2}$}) + O₂ (k₁), and Br(²P_{$\text{1}\text{2}$}) + NO → Br(²P_{$\text{3}\text{2}$}) + NO (k₄) have been measured with a photodissociative IBr laser on the electronic transition ²P_{$\text{1}\text{2}$}?²P_{$\text{3}\text{2}$} in the Br atom (λ = 2.7 μm). The values obtained are (6.4 ± 1.8) × 10^?14 cm³ s^?1 and (1.9 ± 0.6) × 10^?12 cm³ s^?1, respectively. Comparison with published data leads to the conclusion that, contrary to a widely accepted point of view, the high rate constants for the quenching of excited halogen atoms are due to resonant energy transfer processes and not to the paramagnetic nature of the quencher.     

Ab initio calculation of the effective valence shell hamiltonian of carbon: Simultaneous treatment of neutral and ion states

The n = 2 effective valence shell hamiltonian, $\text{H}$^v, of carbon is evaluated through second order using ³P Hartree—Fock orbitals (5s4p) with added d functions to provide results within a few percent of the spd convergence limits. The calculated $\text{H}$^v is employed to evaluate the n = 2 valence states of C, C^?, C⁺, C²⁺ and C³⁺ with an average deviation of the 21 excitation energies, ionization potentials and electron affinity from experimental values of 0.32 eV. Three-electron parts of $\text{H}$^v contribute substantially to a number of these excitation energies.     

Double quantum modulation NMR spectroscopy on spins with I = 1 in solids

NMR experiments with amplitude modulated rf pulses are introduced for the detection of double quantum coherences from spin I = 1 nuclei with large quadrupolar frequencies v_Q in solids. rf pulses of intensity v₁ and with modulation frequency v_m create effective irradiation fields of intensity $\text{1}\text{4}$v²₁/(v_Q-v_m) on the double quantum transition when v₁<¦v_Q-v_m¦?v_Q+v_m. ²D-NMR measurements on an oriented single crystal of deuterated malonic acid are presented.     

Extraction of indium(III) from chloride medium with 1-phenyl-3-methyl-4-acylpyrazol-5-ones. Synergic effect with high molecular weight ammonium salts.

The extraction of In(III) from 1M (Na,H)(Cl,ClO₄) media with 4-acylpyrazol-5-ones (HL) in toluene at 25°C is described by equilibria In ³⁺ + 3 $\text{HL}$ ? $\text{InL}{}_3$ + 3 H⁺ (log K = 1.48, 1.03, 0.87 with acyl = benzoyl, lauroyl, 2-thenoyl), InCl ²⁺ + 2 $\text{HL}$ ? $\text{InClL}{}_2$ + 2 H⁺ (log K = 0.26, ?0.45, ?0.35 respectively) and In³⁺ + m Cl^? ? InCl_m^(3-m)+ (log β_m available from literature). The extraction from 1M (Na,H)(Cl,NO₃) medium is enhanced by addition of aliquat (TOMA⁺,Cl^?) and the following synergic equilibrium takes place : $\text{InCl}{}_2$ + $\text{(TOMA}{}^{\mathrm{+}}$,Cl^?) ? $\text{(TOMA}{}^{\mathrm{+}}$, InCl₂L₂^? (log K = 5.49, 5.25, 5.21 respectively). Cl^? of (TOMA⁺,Cl^?) is exchanged by NO₃^? with the equilibrium constant log K = 1.50. If (TOMA⁺,Cl^?) is replaced by tri-n-octylammonium chloride, the synergic effect is largely reduced (log K = 4.17 with acyl = benzoyl). The extraction from chloride solutions containing ClO₄^? remains unchanged by addition of ammonium salts.     

Optical ringing in solids: The observation of optical coherence and resonance decay from selectively prepared molecular packets in molecular crystals

The optical ringing and the incoherent resonance decay of electronically excited (resolution ≈ 10^?4 cm^?1) solids is observed using the technique of single-mode laser spectroscopy (SLS). The results show that localized states of pentacene in p-terphenyl, at 1.7 K, have a definite phase memory that can be destroyed only above 3 K due to the increased phonon population. Moreover, the optical coherence of the 0, 0 origin (at 16 882 cm^?1) gives a homogeneous linewidth of 40 MHz which is approximately $\text{1}\text{100}$ the width of the vibronic origin, and orders of magnitude less than the “apparent” width of the resonance.     

Direct absorption measurement of the spin—orbit splitting of the ground state in atomic fluorine

We have measured the three hyperfine components of the spin—orbit split (²P_{$\text{3}\text{2}$} → ²P_{$\text{1}\text{2}$}) ground state in atomic fluorine by diode laser absorption spectroscopy. The measurement improves the accuracy of the two lines previously reported (404.175 and 403.969 cm^?1), with the third line at 404.210 cm^?1. This confirms the spacing of the hyperfine components measured by EPR, and establishes diode laser absorption as a viable technique for determining F-atom concentrations.     

Conformational behaviour and inclusion compound forming properties of 5,18-disubstituted derivatives of 5, 11, 12, 18-tetrahydrotribenzo[b,f,j][1,4]diazacyclododecine-6, 17-dione

An X-ray structure analysis shows that the 5, 18-dimethyl derivative ($\text{5}$) of the title compound ($\text{4}$) crystallises from xylene as a 1:1 inclusion compound in which the host molecules adopt propeller-like conformations ($\text{7}$ and $\text{7}$*) with almost perfect $\text{C}$₂ symmetry. Dynamic ¹H n.m.r. spectroscopy shows that the 5, 18-dibenzyl derivative ($\text{6}$) of ($\text{4}$) forms a 1:1 inclusion compound with ethanol in the solid state and undergoes ring inversion ($\text{7}$ ? $\text{7}$*) between enantiomeric propeller-like conformations in solution against a barrier of 21.1 kcal mol^?1     

Coordination chemistry of higher oxidation states. 10 [1]. Oxofluoroanions of osmium(VIII) [OsO4F2]2− and [OsO3F3]−

Trioxotrifluoroosmates(VIII) M[OsO₃F₃] (M = Cs, Rb, K) have been prepared by direct combination of OsO₃F₂ and the appropriate alkali fluoride MF. The reaction of OsO₄ with M′F (M′ = Cs, Rb) in aqueous solution produces the tetraoxodifluoroosmates(VIII) M′₂[OsO₄F₂]. On the basis of their vibrational spectra the assignment of a $\text{fac}$ (C_3v) structure to [OsO₃F₃]^? and a $\text{cis}$ (C_2v) to [OsO₄F₂]^2? is proposed. The electronic spectra of the anions have been recorded and are interpreted using the optical electronegativity concept.     

Preferential energy transfer from N2(A) to specific energy levels of Cu atoms

Emission spectra resulting from reaction of “clean” N₂(A³ Σ_u⁺) with copper atoms were studied using a flowing afterglow apparatus. The population distribution of the Cu states was calculated from the spectrum; it indicates that Cu atoms are excited by nearly resonant energy transfer processes. N₂(A,v') + Cu(²S_{$\text{1}\text{2}$}) → N₂(X, v) + Cu^* , and that the transfer is most efficient for N₂(A,v') → N₂(X,v) transitions with large Franck-Condon factors. The preferential energy transfer results in population inversion between some of the Cu states.     

A molecular orbital study of the cis-trans energy difference in glyoxal

The barrier to internal rotation around the C-C bond in glyoxal, and the energy difference between the cis and the trans form of the molecule have been estimated using (7,$\text{3}\text{4}$) and (9,$\text{5}\text{4}$) Gaussian basis sets including polarization functions. The predicted energy of the cis form relative the ground state trans form was found to be substantially higher (4.9–6.3 kcal mol^?1) than the experimental value of 3.2 kcal mol^?1.     

Cross-conjugated biradicals: Kinetics and kinetic isotope effects in the thermal isomerizations of cis- and trans-2,3-dimethylemethylnecyclopropane,cis- and trans-3,4-dimethyl-1,2-dimethylenecyclobutane,and of 1,2,8,9-decatetraene

cis- and trans - 2,3 - Dimethylenemethylenecyclopropane ($\text{C}$ and $\text{T}$) interconvert at 160.0° with a small normal kinetic isotope effect (KIE) when the exo-methylene is deuterated, but the 1,3-shift products, 2-methylethylidenecyclopropane, show a large normal KIE, 1.35 and 1.31, when formed from $\text{C}$ and $\text{T}$, respectively. This data can be interpreted in terms of either parallel reactions or a common trimethylenemethane diradical intermediate formed with a normal KIE of 1.11 and closing to 1,3-shift product with a normal KIE of 1.29 due to the effect of deuterium in the required 90° rotation of the exo-methylene carbon.The kinetics of the thermal 1,3- and 3,3-shifts of cis- and rans-3,4-dimethyl-1,2-dimethylenecyclobutane ($\text{CB}$ and $\text{TB}$) were determined in a flow reactor. The first order rate constants are log k_CB (sec^?1) = 13.7 ? 42,200/2.3 RT and log k_TB (sec^?1) = 13.6 ? 41,900/2.3 RT (E_a in kcal/m) which compare favorably to that from the parent hydrocarbon. 1,2-dimethylenecyclobutane, after reasonable correction for dimethyl substitution.Rearrangement of $\text{TB}$ and its bis(dideuteriomethylene) derivative at 230.0° revealed a normal KIE of 1.08. This KIE could be interpreted in terms of either a methylene rotational isotope effect in a concerted reaction or formation of a bisallyl diradical with the expected normal rotational IE on closure to the 1,3-shift product of 1.12 with no IE in the ring opening when the result is corrected for return of the biradical to starting material.The kinetics of intramolecular 2 + 2 cycloaddition of 1,2,8,9-decatetraene were determined in a flow reactor. The first order rate constant is log k(sec^?1) = 9.4 ? 30,800/2.3 RT (E_a in kcal/m). These energetics are compared with those of other 2 + 2 cycloadditions. The major product is 3,4-dimethylenecyclooctene ($\text{DC}$) which is also found from the minor product, cis-7,8-dimethylenebicvyclo[4.2.0]octane ($\text{CO}$), at higher temperatures. The trans isomer, $\text{TO}$, also gives $\text{DC}$ at about the same rate as $\text{CO}$.     

Solvent extraction of molybdophosphate with cationic dyes and spectrophotometric determination of micro amounts of phosphate in waters

A very sensitive spectrophotometric method for phosphate is reported. Of the several cationic dyes and extracting solvents examined, ethyl violet and a mixed cyclohexane-4-methyl-pentan-2-one solvent (1:3 $\text{v}\text{v}$) are most satisfactory. When the absorbance of ethyl violet is measured in the organic phase at 602 nm, the calibration graph is linear in the range 0–0.6 μg of phosphorus; the molar absorptivity is 2.7 × 10⁵ l mol^-1 cm^-1. The method is applied to the determination of phosphorus as orthophosphate and condensed phosphate in natural waters. The standard deviation and relative standard deviation for the determination of several ppb of phosphorus in tap water were 0.11 and 1.3%, respectively, and recoveries were good.     

Séparation baryum-strontium par chromatographie sur cellulose : Chromatographie sur poudre de cellulose

The systematic investigation of a good Ba⁺²- Sr⁺² separation using a. cellulose powder column has given us the choice of two eluants: (a) Methanol 1.2N en HCl (gazeux) + water ($\text{v}\text{v}$: $\text{100}\text{5}$) (b) Methanol-ether-HCl 12N ($\text{v}\text{v}$:75-25-5). The second one gave excellent separations, both in quantities of the order of 200 mg and in tracer amounts: Sr ? 0.001 μg-Ba ? 0.8 μg If we increase the eluting power of the solvent after the complete elution of Sr⁺² (suppression of ether), we considerably reduce the time and volume needed for the Ba⁺² elution. This work was done with the help of radioactive isotopes ¹⁴⁰Ba (12.8 days) and ⁹⁰Sr (25 years). At the same time, we found that the eluant used is also efficient for the separation of ¹⁴⁰Ba and ⁹⁰Sr from their respective decay products: ¹⁴⁰La and ⁹⁰Y (40h and 65h).     

A 29Si, 13C and 1H NMR study of the interaction of various halotrimethylsilanes and trimethylsilyl triflate with dimethyl formamide and acetonitrile,a comment on the nucleophile induced racemisation of halosilanes

The ²⁹Si, ¹³C and ¹H NMR spectra of $\text{1}\text{1}$ mixtures of Me₃SiI and Me₃SiOSO₂CF₃ with DMF in CD₂Cl₂ show signals that are consistent with the formation of Me₃SiO$\text{C}\text{+}$H(NMe₂)X^? but not with penta- or hexa-coordinate silicon species. The spectra of a $\text{1}\text{1}$ mixture of Me₃SiBr and DMF show a rapidly exchanging, equilibrium mixture of Me₃SiO$\text{C}\text{+}$H(NMe₂)Br^? and starting materials. No strong evidence for salt formation between DMF and Me₃SiCl was obtained. The spectra of Me₃SiX (X = I, Br, Cl, OSO₂CF₃) in CD₃CN indicate that neither adduct formation nor extra coordination at silicon is significant.     

Anodic stripping determination of mercury in air with a glassy carbon electrode

A technique for stripping determination of mercury traces in air employing a glassy carbon electrode is described. The sample is passed at 2 liters min^?1 for 2 hr through an absorber containing 0.2 M potassium permanganate and 10% $\text{w}\text{v}$ sulfuric acid (1:1). After reduction with hydroxylamine hydrochloride, the determination is carried out in 0.12 M potassium thiocyanate at pH 2.0 ± 0.2 in the presence of 0.2 ppm of cupric ions. Calibration curves were found to be linear in the range 20 ppb-1 ppm Hg(II) in the cell. The accuracy of the method was tested over simulated samples and it was found to be better than 95%; the relative standard deviation was 5% or less. The limit of detection of mercury in air was approximately 10 μg m^?3.     

Stable isobenzofuran endoperoxide and its use for oxidation of olefins ans aromatic compounds

1,3-Di-tert-butylisobenzofuran reacts with singlet oxygen with rate constant of 2.8 x 10⁹ M^?1 sec^?1 to give stable endoperoxide $\text{4}$. Thermolysis of the endopepoxide ($\text{4}$) in the ppesence of norbornene and naphthalene gave the corrpesponding epoxide and naphthols, respectively. Addition of Pd(OAc)₂ improved the yield of naphtols considepably.     

Determination of cadmium, copper and lead in natural waters after anion-exchange separtion.

A method is described for the determination of cadmium, copper and lead in samples of natural non-saline waters. After acidification with hydrobromic acid, the water sample is filtered and, following the addition of ascorbic acid, passed through a column of the strongly basic anion-exchange resin Dowex 1-X8 (bromide form). On this exchanger cadmium(II). copper(I) and lead(II) are adsorbed as anionic bromide complexes. After elution of these elements with 1 M nitric acid, the determinations by atomic absorption spectrometry are carried out in a medium consisting of 90% ($\text{v}\text{v}$) methanol and 10% ($\text{v}\text{v}$) 1.5 M hydrobromic acid. The procedure was used for the routine determination of cadmium, copper and lead in water samples collected in Austria.