四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

Toward amino acid typing for proteins in FFLUX

Continuing the development of the FFLUX, a multipolar polarizable force field driven by machine learning, we present a modern approach to atom‐typing and building transferable models for predicting atomic properties in proteins. Amino acid atomic charges in a peptide chain respond to the substitution of a neighboring residue and this response can be categorized in a manner similar to atom‐typing. Using a machine learning method called kriging, we are able to build predictive models for an atom that is defined, not only by its local environment, but also by its neighboring residues, for a minimal additional computational cost. We found that prediction errors were up to 11 times lower when using a model specific to the correct group of neighboring residues, with a mean prediction of ∼0.0015 au. This finding suggests that atoms in a force field should be defined by more than just their immediate atomic neighbors. When comparing an atom in a single alanine to an analogous atom in a deca‐alanine helix, the mean difference in charge is 0.026 au. Meanwhile, the same difference between a trialanine and a deca‐alanine helix is only 0.012 au. When compared to deca‐alanine models, the transferable models are up to 20 times faster to train, and require significantly less ab initio calculation, providing a practical route to modeling large biological systems. © 2016 The Authors. Journal of Computational Chemistry Published by Wiley Periodicals, Inc.     

Chemical adaptor systems

"Chemical adaptor systems" are molecules used to link different functionalities, based on unique reactivity that allows controlled fragmentation. Two different mechanistic reactivities were used to prepare chemical adaptor systems. The first is based on a spontaneous intra-cyclization reaction to form a stable ring molecule. Cleavage of the trigger generates a free nucleophile, for example, an amine group, which undergoes intra-cyclization to release the target molecule from the handle part (e.g., a targeting antibody or a solid support for synthesis). The second applied reactivity is an elimination reaction, which is usually based on a quinone-methide-type rearrangement. Similarly, cleavage of the trigger generates a free phenol functionality, which can undergo a self-elimination reaction through a quinone-methide rearrangement to release the target molecule. The adaptor molecules have been applied in the field of drug delivery to release a drug from a targeting device and in the field of solid-phase synthesis to release a synthetic molecule from the solid support. A chemical adaptor molecule has also been used as a building unit to construct dendrimers with a triggered fragmentation.     

Electronic Energy Spectrum of Two-Dimensional Solids and a Chain of C Atoms from a Quantum Network Model

The aim of this study is to explain how a quantum network can be used as simple model to calculate complex band structures. The paper contains an introduction, a mathematical exposure of the method, and applications to graphene, boron nitride, and polyacetylene chains. Using a quantum network is a simple, intuitive, and, yet, rather accurate way to obtain a band structure for a complex material. One focus here is to invoke physical and chemical intuition to construct the effective one-body potential along the wires of a quantum network.     

Spreading and retraction dynamics of smectic liquid crystal domains at interfaces

The spreading of a liquid drop over liquid subphase can be driven by change in interfacial tension mediated through a surfactant, volatile solvent or photoinduced reaction. In contrast to the spreading dynamics of a liquid drop, a liquid crystal drop with anisotropic structure can lead to interesting behaviour due to its viscoelasticity and anchoring at the interfaces. Recently, we have reported studies on unusual spreading and retraction dynamics of a smectic domain doped with a fluorescent dye in the collapsed state of a Langmuir monolayer. Under epifluorescence microscope, during excitation, a stack of layers of the dye-doped smectic domain gets sheared causing the domain to spread asymmetrically. Further, due to line tension, the domain transforms into a circular shape. We also find the domain size to be about twice that of the initial size. Interestingly, in the absence of excitation, the domain retracts to a smaller area. During retraction of the domain, successive generation of edge dislocation loops arising from a nucleus results in an increase in the domain thickness. The dynamics of spreading and retraction of the domain can be understood by invoking changes in the spreading coefficient due to photoinduced modification of the interfacial tension.     

Superiority of a new gradient system utilizing a critical threshold for the adsorption capacity of polypeptides to column packing when compared with a standard gradient system for the simultaneous and quantitative analysis of polypeptides

Compared with a standard gradient system, the new gradient system which we developed has a major advantage because it permits a wide range of acetonitrile content, e.g. more than the critical threshold, in the polypeptide solution and allows the quantitative analysis of the polypeptide with satisfactory analytical precision. Additionally, this new gradient system allows the enhancement of the sensitivity of the polypeptide analysis proportionate to the increased volume of solution loaded with the same levels of precision. In contrast, when using a standard gradient system it is difficult to analyze a polypeptide quantitatively with good precision due to either adsorption to various materials or to irregular change in the ratio between a retained and a passed peak of the polypeptide. Additionally, the appearance of a passed peak results in a loss in the sensitivity of the polypeptide analysis, although no adsorption of a polypeptide to various materials occurs in a solution with acetonitrile content more than the critical threshold. Consequently, the new gradient system is effective for the simultaneous and quantitative analysis of different polypeptides with good precision and without any loss of sensitivity due to either adsorption to various materials or the appearance of a passed peak.     

Dominant representations and a markaracter table for a group of finite order

Summary The concept of markaracter is proposed to discuss marks and characters for a group of finite order on a common basis. Thus, we consider a non-redundant set of dominant subgroups and a non-redundant set of dominant representations (SDR), where coset representations concerning cyclic subgroups are named dominant representations (DRs). The numbers of fixed points corresponding to each DR are collected to form a row vecter called a dominant markaracter (mark-character). Such dominant markaracters for the SDR are collected as a markaracter table. The markaracter table is related to a subdominant markaracter table of its subgroup so that the corresponding row of the former table is constructed from the latter. The data of the markaracter table are in turn used to construct a character table of the group, after each character is regarded as a markaracter and transformed into a multiplicity vector. The concept of orbit index is proposed to classify multiplicity vectors; thus, the orbit index of each DR is proved to be equal to one, while that corresonding to an irreducible representation is equal to zero.     

Anchor Residues Guide Form and Function in Grafted Peptides

Loops at protein–protein interfaces are a rich source of peptide leads that have high specificity and low toxicity. Although such peptides typically need to be constrained to overcome thermodynamic and metabolic limitations, design guidelines to obtain a successfully constrained peptides, and thus facilitate the transition from loop to drug, are relatively poorly formulated. In this work, we surveyed the structures of interface loops and found the position of the terminal residues to be a key determinant of conformation. We used this knowledge to improve the process of molecular grafting, a valuable approach for constraining and stabilising peptides by fusing them to a suitable scaffold. We show that an informed choice of where a loop is “anchored” to a scaffold improves its form and function. This knowledge can help guide the choice of loop and its matching scaffold, and thus increase the success rate for designing stable and potent peptide drug leads.     

Direct introduction of a hydrazide group into a quartz crystal microbalance surface with dodecanoic hydrazide embedded in a hybrid bilayer membrane

Hydrazide group has a potential of immobilizing an antibody on a sensor surface in a way that ensures an optimal orientation and efficiency of the antibody. However, a multi-step chemical process, required for the preparation of a hydrazide group, is a barrier to its extensive application. This paper describes a new method to introduce a hydrazide group to a sensor surface by a one-step process using dodecanoic hydrazide. The method is based on an ability of the dodecanoic hydrazide to be incorporated into a hybrid bilayer membrane (HBM) layer, thereby presenting its hydrazide group to the surface. Liposome containing dodecanoic hydrazide was added to a hydrophobic self-assembled monolayer surface of a quartz crystal microbalance for the formation of a HBM. Then, the hydrazide group, presented in the surface of the HBM layer, was utilized for the oriented immobilization of an antibody via its carbohydrate moiety which was partially oxidized prior to the conjugation reaction. Activity and stable status of the incorporated dodecanoic hydrazide was revealed by the efficiency and reproducibility of the resulting immunosensor chip.     

Dual-Color Photoconvertible Fluorescent Probes Based on Directed Photooxidation Induced Conversion for Bioimaging

We herein present a new concept to produce dual-color photoconvertible probes based on a mechanism called Directed Photooxidation Induced Conversion (DPIC). As a support of this mechanism, styryl-coumarins ( SCs ) bearing Aromatic Singlet Oxygen Reactive Moieties (ASORMs) like furan and pyrrole have been synthesized. SCs are bright fluorophores, which undergo a hypsochromic conversion upon visible light irradiation due to directed photooxidation of the ASORM that leads to the disruption of conjugation. SC-P , a yellow emitting probe bearing a pyrrole moiety, converts to a stable blue emitting coumarin with a 68 nm shift allowing the photoconversion and tracking of lipid droplet in live cells. This new approach might pave the way to a new generation of photoconvertible dyes for advanced bioimaging applications.     

Cooperative Chemotaxis of Magnesium Microswimmers for Corrosion Spotting

Numerous artificial micro- and nanomotors, as well as various swimmers have been inspired by living organisms that are able to move in a coordinated manner. Their cooperation has also gained a lot of attention because the resulting clusters are able to adapt to changes in their environment and to perform complex tasks. However, mimicking such a collective behavior remains a challenge. In the present work, magnesium microparticles are used as chemotactic swimmers with pronounced collective features, allowing the gradual formation of macroscopic agglomerates. The formed clusters act like a single swimmer able to follow pH gradients. This dynamic behavior can be used to spot localized corrosion events in a straightforward way. The autonomous docking of the swimmers to the corrosion site leads to the formation of a local protection layer, thus increasing corrosion resistance and triggering partial self-healing.     

Analytical assays based on detecting conformational changes of single molecules.

One common strategy for the detection of biomolecules is labeling either the target itself or an antibody that binds to it. Herein, a different approach, based on detecting the conformational change of a probe molecule induced by binding of the target is discussed. That is, what is being detected is not the presence of the target or the probe, but the conformational change of the probe. Recently, a single-molecule sensor has been developed that exploits this mechanism to detect hybridization of a single DNA oligomer to a DNA probe, as well as specific binding of a single protein to a DNA probe. Biomolecular recognition often involves large conformational changes of the molecules involved, and therefore this strategy may be applicable to other assays.     

Measuring the Stability of Supramolecular Complexes in the Proximity of Single-Walled Carbon Nanotubes

The decoration of SWNTs with supramolecular motifs is a common strategy for their subsequent noncovalent functionalization. However, due to the lack of a standard methodology, there are no quantitative measurements showing the extent to which the supramolecular equilibria are affected by one of the host-guest couple being anchored to the SWNT. Here, we use a method we initially developed to quantify association of small organic molecules to the walls of SWNTs to compare association constants of two host-guest systems, a Hamilton receptor-cyanuric acid derivative and a crown ether-ammonium couple, in solution and when the host is covalently attached to the SWNTs. Our data show that association does occur, but the stability of the complexes is significantly affected, as reflected in a sizable reduction in their association constant, when compared to solution.     

Experimental study of dielectrophoresis and liquid dielectrophoresis mechanisms for particle capture in a droplet

This work presents a microfluidic system that can transport, concentrate, and capture particles in a controllable droplet. Dielectrophoresis (DEP), a phenomenon in which a force is exerted on a dielectric particle when it is subjected to a non-uniform electric field, is used to manipulate particles. Liquid dielectrophoresis (LDEP), a phenomenon in which a liquid moves toward regions of high electric field strength under a non-uniform electric field, is used to manipulate the fluid. In this study, a mechanism of droplet creation presented in a previous work that uses DEP and LDEP is improved. A driving electrode with a DEP gap is used to prevent beads from getting stuck at the interface between air and liquid, which is actuated with an AC signal of 200 V(pp) at a frequency of 100 kHz. DEP theory is used to calculate the DEP force in the liquid, and LDEP theory is used to analyze the influence of the DEP gap. The increment of the actuation voltage due to the electrode with a DEP gap is calculated. A set of microwell electrodes is used to capture a bead using DEP force, which is actuated with an AC signal of 20 V(pp) at a frequency of 5 MHz. A simulation is carried out to investigate the dimensions of the DEP gap and microwell electrodes. Experiments are performed to demonstrate the creation of a 100-nL droplet and the capture of individual 10-μm polystyrene latex beads in the droplet.     

Data and device protection: A ToF‐SIMS,wetting, and XPS study of an Apple iPod nano

An important aspect of the robustness of an electronic device is its ability to resist water, fingerprints, dirt, and smudges that may compromise its ability to function and/or the information within it. Here, we report a chemical analysis by ToF‐SIMS, wetting, and XPS of the surfaces in a commercially available Apple iPod nano (8GB, MC525LL/A), which showed good resistance to its environment. This analysis reveals that the front panel (touchscreen) of the device is coated with a low free energy fluorinated polymer that may consist of short segments of a fluorinated hydrocarbon connected through ether linkages. No other part of the device appears to have this hydrophobic coating. A plasma treatment of the device leads to a deterioration of its performance. This work demonstrates how different analytical techniques can complement each other and contribute to a better understanding of a surface or a material. Copyright © 2013 John Wiley & Sons, Ltd.     

Development of single-beam wide-field infrared imaging to study sub-cellular neuron biochemistry

Multi-beam wide-field imaging using synchrotron mid-infrared light sources coupled with focal plane array detectors has provided a major breakthrough to the field of bio-spectroscopic imaging. The ability to collect sub-cellular molecular images in minutes has opened the door to a new era of biochemical studies. Although a multi-beam approach is the superior method to this form of imaging, it requires a specialized set of beamline optics, which may not be compatible with existing mid-infrared microscopy beamlines, or research programs/applications currently in place (some of which do not require an imaging component). In this investigation we demonstrate that a single-beam approach can be utilized in a similar manner to multi-beam imaging, to collect sub-cellular biochemical images of brain neurons in a rapid time frame, without extensive modification of an existing beamline configuration. This study uses an applied example, imaging the same neuron in situ within a brain tissue section, with both synchrotron and thermal sources. The results highlight the advantage of improved spatial resolution/image quality and spectral quality (signal to noise ratio) that is obtained when a high magnification and high numerical aperture objective (52×, 0.65) is coupled to a synchrotron mid-infrared lightsource with a focal plane array detector. The approach we report may prove to be particularly appealing to numerous existing mid-infrared beamlines, allowing straightforward integration of sub-cellular biochemical imaging with existing non-imaging research applications.     

One-Pot Synthesis of Chiral N-Arylamines by Combining Biocatalytic Aminations with Buchwald–Hartwig N-Arylation

The combination of biocatalysis and chemo-catalysis increasingly offers chemists access to more diverse chemical architectures. Here, we describe the combination of a toolbox of chiral-amine-producing biocatalysts with a Buchwald–Hartwig cross-coupling reaction, affording a variety of α-chiral aniline derivatives. The use of a surfactant allowed reactions to be performed sequentially in the same flask, preventing the palladium catalyst from being inhibited by the high concentrations of ammonia, salts, or buffers present in the aqueous media in most cases. The methodology was further extended by combining with a dual-enzyme biocatalytic hydrogen-borrowing cascade in one pot to allow for the conversion of a racemic alcohol to a chiral aniline.     

A Noncanonical Function of Sortase Enables Site‐Specific Conjugation of Small Molecules to Lysine Residues in Proteins

We provide the first demonstration that isopeptide ligation, a noncanonical activity of the enzyme sortase A, can be used to modify recombinant proteins. This reaction was used in vitro to conjugate small molecules to a peptide, an engineered targeting protein, and a full‐length monoclonal antibody with an exquisite level of control over the site of conjugation. Attachment to the protein substrate occurred exclusively through isopeptide bonds at a lysine ε‐amino group within a specific amino acid sequence. This reaction allows more than one molecule to be site‐specifically conjugated to a protein at internal sites, thereby overcoming significant limitations of the canonical native peptide ligation reaction catalyzed by sortase A. Our method provides a unique chemical ligation procedure that is orthogonal to existing methods, supplying a new method to site‐specifically modify lysine residues that will be a valuable addition to the protein conjugation toolbox.     

Multiple automatic base selection: Protein–ligand docking based on incremental construction without manual intervention

A possible way of tackling the molecular docking problem arising in computer- aided drug design is the use of the incremental construction method. This method consists of three steps: the selection of a part of a molecule, a so- called base fragment, the placement of the base fragment into the active site of a protein, and the subsequent reconstruction of the complete drug molecule. Assuming that a part of a drug molecule is known, which is specific enough to be a good base fragment, the method is proven to be successful for a large set of docking examples. In addition, it leads to the fastest algorithms for flexible docking published so far. In most real-world applications of docking, large sets of ligands have to be tested for affinity to a given protein. Thus, manual selection of a base fragment is not practical. On the other hand, the selection of a base fragment is critical in that only few selections lead to a low-energy structure. We overcome this limitation by selecting a representative set of base fragments instead of a single one. In this paper, we present a set of rules and algorithms to automate this selection. In addition, we extend the incremental construction method to deal with multiple fragmentations of the drug molecule. Our results show that with multiple automated base selection, the quality of the docking predictions is almost as good as with one manually preselected base fragment. In addition, the set of solutions is more diverse and alternative binding modes with low scores are found. Although the run time of the overall algorithm increases, the method remains fast enough to search through large ligand data sets.