Studies of interactions between silane coupling agents and cellulose fibers with liquid and solid-state NMR

The hydrolysis of three alkoxy-silane coupling agents, gamma-methacryloxypropyl trimethoxy silane (MPS), gamma-aminopropyl triethoxy silane (APS), and gamma-diethylenetriaminopropyl trimethoxy silane (TAS), was carried out in ethanol/water solutions (80/20 w/w) at different pH values and followed by 1H, 13C and 29Si NMR spectroscopy. Acidic media were found to stabilize the hydrolyzed forms. As expected, the formation of silanol groups was followed by their self-condensation to generate oligomeric structures, yielding, ultimately, solid homopolycondensated structures, as analyzed by 29Si and 13C high-resolution solid-state NMR. Hydrolyzed MPS in acidic media was then successfully adsorbed onto a cellulose surface and the ensuing substrates submitted to thermal treatment at 110-120 degrees C under reduced pressure, in order to create covalent bonds between cellulose and the coupling agent.     

Filler-elastomer interactions: influence of silane coupling agent on crosslink density and thermal stability of silica/rubber composites

In this work, the crosslink density and thermal stability of the silica/rubber composites treated by silane coupling agents, i.e., gamma-aminopropyl triethoxysilane (APS), gamma-chloropropyl trimethoxysilane (CPS), and gamma-methacryloxypropyl trimethoxysilane (MPS), were investigated. The chemical structures of modified silicas were studied in term of solid-state 29Si NMR spectroscopy. The crosslink density of the composites was determined by swelling measurement. The development of organic functional groups on silica surfaces treated by coupling agents led to an increase in the crosslink density of the composites, resulting in increasing final thermal stability of the composites. The composites treated by MPS showed the superior crosslink density and thermal stability in these systems. The results could be explained by the fact that the organic functional groups of silica surfaces by silane surface treatments led to an increase of the adhesion at interfaces between silicas and the rubber matrix.     

Adsorption of 3-mercaptopropyltrimethoxysilane and 3-aminopropyltrimethoxysilane at platinum electrodes

In this work we studied the self-assembled monolayer (SAM) formation of 3-mercaptopropyltrimethoxysilane [HS(CH₂)₃Si(OCH₃)₃] (MPS) and 3-aminopropyltrimethoxysilane [H₂N(CH₂)₃Si(OCH₃)₃] (APS) on platinum surfaces. We used X-ray photoelectron spectroscopy (XPS), specular reflectance FTIR, and electrochemistry to study the composition and structure of the self-assembly. XPS results of the Pt modified electrodes showed the presence of sulfur and nitrogen binding energy peaks indicating the presence of MPS and APS. The platinum substrates modified with MPS and APS showed IR absorption bands corresponding to the different stretches present in both compounds. Platinum disk electrodes, before and after being submerged in 1 mM solutions of MPS and APS for 24 h, were characterized voltammetrically by using 2.5 mM K₄Fe(CN)₆ in 0.1 M KCl, as the redox active couple. The MPS/Pt system is free of mass transfer effects, which are characteristic of pinhole defects in an MPS monolayer.     

Preparation and characterization of polyimide-nanogold nanocomposites from 3-mercaptopropyltrimethoxysilane encapsulated gold nanoparticles

In this study, we report a new design to prepare polyimide-nanogold nanocomposites of high Au content and good thermal stability. The nanocomposites were prepared from the coupling agent (3-aminopropyltriethoxysilane, APS) capped poly(amic acid) (PAA-APS) and 3-mercaptopropyltrimethoxysilane (MPS) stabilized gold nanoparticles (MPS-Au). The Si-OR groups of MPS on the surface of MPS-Au provided further reaction with APS, hence the covalent bonds between PAA and MPS-Au were formed. PAA-Au was converted into PI-Au nanocomposite by a multiple-step baking. The results of particle-sized analysis show that the sizes of the synthesized MPS-Au from different MPS/Au mole ratios (2 and 0.5) are about 2 nm and 5 nm, respectively. FE-SEM images show that MPS-Au particles are dispersed well in the prepared nanocomposites and no large-scale aggregation occurs. TGA results indicate that the decomposition temperature of each nanocomposite prepared from its washed precursor is lower than that of APS-capped polyimide, but the temperature of maximum decomposed rate of each nanocomposite is higher than that of APS-capped polyimide. The results show the high thermal stability and application potentials of the prepared polyimide-nanogold nanocomposites.     

Square‐Wave Voltammetric Detection of Dopamine at a Copper‐(3‐Mercaptopropyl) Trimethoxy Silane Complex Modified Electrode

Square‐wave voltammetric detection of dopamine was studied at a copper (Cu)‐(3‐mercaptopropyl) trimethoxy silane (MPS)‐complex modified electrode (Cu‐MPS). The modification of the electrode was based on the attachment of MPS onto an electrochemically activated glassy carbon electrode (GCE) by the interaction between methoxy silane groups of MPS and surface hydroxyl groups and followed by the complexation of copper with the thiol groups of MPS. The surface of the modified electrode was further coated by a thin layer of Nafion film. The surface of the Nafion coated MPS‐Cu complex modified electrode (Nafion/Cu‐MPS) was characterized using cyclic voltammetry, electrochemical quartz crystal microbalance (EQCM), scanning electron microscope (SEM), X‐ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FT‐IR) spectrometry. The modified electrode exhibited an excellent electrocatalytic activity towards the oxidation of dopamine, which was oxidized at a reduced potential of +0.35 V (vs. Ag/AgCl) at a wider pH range. Various experimental parameters, such as the amount of copper, the pH, and the temperature were optimized. A linear calibration plot was obtained in the concentration range between 8.0×10^?8 M and 5.0×10^?6 M and the detection limit was determined to be 5.0×10^?8 M. The other common biological compounds including ascorbic acid did not interfere and the modified electrode showed an excellent specificity to the detection of dopamine. The Nafion/Cu‐MPS modified electrode can be used for about 2 months without any significant loss in sensitivity.     

LC Separation and Quantification of Tocopheryl Polyethylene Glycol Succinate and Tocopheryl Acid Succinate in TPGS Reaction Mixture

An analytical method was proposed for the determination of d-α-tocopheryl polyethylene glycol 1,000 succinate (TPGS 1000) and d-α-tocopheryl acid succinate (TAS) in TPGS reaction mixture with a simple and inexpensive reversed-phase liquid chromatographic method. The LC separation was carried out on a C18 analytical column with UV detection at 284 nm using acetonitrile and water (90:10, v/v) with 0.5% acetic acid (pH 3.73) at a flow rate of 1.5 mL min^?1. The average recoveries of TPGS were between 95.41 and 96.82%, while those of TAS were between 96.69 and 102.39%. Within-day and day-to-day relative standard deviations of TPGS were less than 0.23 and 0.29%, while those of TAS were less than 0.17 and 0.27%. The content of TPGS was determined in terms of the hydrolyzed α-tocopherol. The alkaline hydrolysis process demonstrated high α-tocopherol recoveries between 98.78 and 103.05%. This method has been applied successfully to the accurate determination of TAS and TPGS in highly complex reaction mixture to monitor the reaction process progress.     

Preparation and utilization of poly(methacryloylsilatrane) as a salt‐dissociation enhancer in PEO‐based polymer electrolytes

Polymers containing silatrane units were prepared by the free radical polymerization of methacryloylsilatrane (MPS), and their conductivities were evaluated. We confirmed that MPS can be polymerized without excessive decomposition of the silatrane units by the radical polymerization initiated by azobisisobutyronitrile. The chemical structure of the polymerized MPS (pMPS) was characterized by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, gel permeation chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectroscopy. The pMPS formed a homogeneous complex with lithium trifluoromethyl sulfonate (LiOTf), although the obtained pMPS/LiOTf complex did not show conductivity. The negligible conductivity was caused by the high glass transition temperature (T_g) of the pMPS matrix, which exceeded 70°C. The pMPS was subsequently utilized as a salt‐dissociation enhancer for the poly(ethylene oxide)‐based polymer electrolyte. MPS was copolymerized with poly[methacryloyl oligo(ethylene oxide)] (pMEO) by free radical polymerization. When the pMEO incorporated a small amount of MPS units (i.e. lower than 15 mol%), the elevation in T_g was not observed, and the conductivity markedly improved. Among the series of copolymers and when compared with pristine pMEO, the copolymer containing 6.3% of MPS units had the maximum conductivity (3.1 × 10^?4 S cm^?1 at 80°C). The Vogel–Fulcher–Tammann fitting parameters showed that the conductivity was improved by the increase in the number of carrier ions. The enhancement in salt dissociation was presumably due to the homogeneous incorporation of polar MPS units. However, when the MPS unit content exceeded 15 mol%, the conductivity was lowered because of the increase in T_g. Copyright © 2013 John Wiley & Sons, Ltd.     

二氧化硅/聚苯乙烯单分散性核/壳复合球的制备

采用无皂乳液聚合包覆 ,制备了二氧化硅 聚苯乙烯单分散核 壳 (SiO2 PS)复合颗粒 ,包覆层厚度达到 10 0nm .选择 80～ 2 5 0nm二氧化硅粒径作为核颗粒 .为提高包覆效率 ,二氧化硅颗粒先用偶联剂甲基丙烯酰 (3 三甲氧基硅烷 )丙酯 (MPS)进行不同程度的表面改性 .控制MPS的结合率和单体的初始浓度可提高包覆效率 ,同时得到了单分散性复合颗粒 ,用透射电镜 (TEM)观察复合粒子的核 壳形态 .用动态光散射法 (DLS)测量表明所得复合颗粒具有单分散性 .     

Modified carrageenan. 5. Preparation,swelling behavior,salt‐ and pH‐sensitivity of partially hydrolyzed crosslinked carrageenan‐graft‐polymethacrylamide superabsorbent hydrogel

The polysaccharide, kappa‐carrageenan (κC) was chemically modified to achieve a novel superabsorbent hydrogel via graft copolymerization of methacrylamide (MAM) onto the substrate followed by alkaline hydrolysis. Ammonium persulfate (APS) and N,N′‐methylene bisacrylamide (MBA) were used as a free‐radical initiator and a crosslinker, respectively. The saponification reaction was carried out using sodium hydroxide aqueous solution. Either κC‐g‐PMAM or hydrolyzed κC‐g‐PMAM (PMAM: polymethacrylamide) was characterized by FT‐IR spectroscopy. The effect of grafting variables (i.e. concentration of MBA, MAM, and APS) and alkaline hydrolysis conditions (i.e. NaOH concentration, hydrolysis time and temperature) were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. The swelling capacity of these hydrogels was also measured in various salt solutions. Results indicated that the swelling ratios decreased with an increase in the ionic strength of the salt solutions. This behavior can be attributed to charge screening effect for monovalent cations, as well as ionic crosslinking for multivalent cations. Absorbency of superabsorbing hydrogels was examined in buffer solutions with pH range 1–13. Also, the pH reversibility and on–off switching behavior, at pH values 3.0 and 8.0, makes the synthesized hydrogels good candidates for controlled delivery of bioactive agents. Finally, swelling kinetics in distilled water and various salt solutions was preliminary investigated. Results showed that the swelling in water was faster than in saline solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

Analytical investigation of the chemical reactivity and stability of aminopropyl-grafted silica in aqueous medium

Various samples of aminopropyl-functionalized silica (APS) have been prepared by grafting an organosilane precursor 3-aminopropyl-triethoxysilane (APTES) onto the surface of silica gel. The amine group content of the materials has been adjusted by varying the amount of APTES in the reaction medium (toluene). The grafted APS solids have been characterized with using several analytical techniques (N₂ adsorption, X-ray photoelectron spectroscopy, infrared spectrometry) to determine their physico-chemical properties. Their reactivity in aqueous solutions was studied by acid-base titration, via protonation of the amine groups, and by way of complexation of these groups by Hg^II species. APS stability in aqueous medium was investigated at various pH and as a function of time, by the quantitative analysis of soluble Si- or amine-containing species that have been leached in solution upon degradation of APS. The chemical stability was found to increase when decreasing pH below the pK_a value corresponding to the RNH₃⁺/RNH₂ couple, but very low pH values were necessary to get long-term stability because of the high local concentration of the amine groups in the APS materials. Adsorption of mercury(II) ions on APS was also performed to confirm the long-term stability of the grafted solid in acidic medium. Relationship between solution pH and APS stability was discussed. For sake of comparison, the stability of APS in ethanol and that of mercaptopropyl-grafted silica (MPS) in water have been briefly considered and discussed with respect to practical applications of silica-based organic–inorganic hybrids, e.g., in separation science or in the field of electrochemical sensors.     

Cyclic Acetal-Photosensitized Polymerization. 9. Photopolymerization of Triallylidene Sorbitol

Abstract

The photopolymerization of triallylidene sorbitol (TAS) was carried out in benzene at 40°C without the usual initiator. The polymerization of TAS was found to be initiated with the ester radical generated via the acetal radical from TAS by means of photoirradiation. The rate of polymerization and the molecular weight of polymer were small due to the degradative chain transfer, It was kinetically investigated from the standpoints of the degradative chain transfer by the allylidene group and the cyclization by three double bonds. The following results were obtained: (1) The relation between the rate of polymerization, R_p, the monomer concentration, [M], could be expressed by [M] /R_p = (A[M] + B)/(3[M] + C), where A, B, and C were constant; (2) the ratio of the rate constant of unimolecular cyclization to the total rate constant of bimolecular propagation and the chain transfer of uncyclized radical was estimated to be 3.0 mol/dm³. A small amount of cyclopolymerization took place.     

甲基丙烯酸3-三甲氧基硅丙酯/苯乙烯细乳液共聚合过程中的水解及缩合反应

研究了甲基丙烯酸3-三甲氧基硅丙酯(MPS)和苯乙烯(St)细乳液聚合过程中的水解及缩合反应.用气相色谱仪测定聚合过程中水解产物——甲醇的含量来研究MPS的水解度.MPS分子主要在细乳液液滴与水的界面以及乳胶粒与水的界面上发生水解反应.MPS和St比例、介质pH值、乳化剂用量、引发剂类型和用量都会影响MPS的水解程度.缩合产物用29Si固态核磁共振表征,中性条件下,缩合反应受到抑制,在高MPS/St比例的体系中也只生成少量缩合产物.酸性和碱性条件下,缩合产物量均增加,但碱性条件下,体系中仍有一定数量未缩合的硅氧烷存在,这与细乳液聚合独特的液滴成核机理及聚合过程中较少液滴间物质交换有关.     

高分散性SiO2/PMMA复合材料的制备与表征——纳米SiO2在MMA中的分散

用硅烷偶联剂3-(甲基丙烯酰氧)丙基三甲氧基硅烷(MPS)对分散于乙醇中的纳米SiO2进行偶联改性,再通过介质置换和原位本体聚合制得SiO2/甲基丙烯酸甲酯(MMA)单体分散液和SiO2/PMMA复合材料.红外光谱分析(FTIR)和热重分析(TG)结合洗提实验考察了SiO2表面MPS的偶联率和偶联效率,透射电镜(TEM...     

Characterization of the hydrolysis and polymerization processes of methacryloxypropyltrimethoxysilane

The sol-gel synthesis of hybrid methacrylate-silica materials using methacryloxypropyltrimethoxysilane (MPS) as precursor, has been analyzed using ¹H and ²⁹Si liquid NMR as well as ²⁹Si and ¹³C MAS-NMR. Under the present experimental conditions (H₂O/MPS=3; pH=2), hydrolysis of methoxy groups is fast. However, 5% of unreacted alkoxy groups are still present in the sol after 14 days aging. Condensation reactions lead mainly to cyclic or short linear species. The number of cross-linking points never exceeds 20% of the Si units, which seems to prevent the formation of a gel. Polymerization of methacrylate groups occur easily under short times of U.V. irradiation. A quantitative analysis shows about 20% of residual unreacted groups in the polymerized materials. Addition of free methylmethacrylate in the hydrolyzed sols helps in getting a fully polymerized organic network.     

Preparation of Silica/Poly(tert‐butylmethacrylate) Core/Shell Nanocomposite Latex Particles

Nanocomposite latex particles, with a silica nanoparticle as core and crosslinked poly(tert‐butylmethacrylate) as shell, were prepared in this work. Silica nanoparticles were first synthesized by a sol‐gel process, and then modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) to graft C?C groups on their surfaces. The MPS‐modified silica nanoparticles were characterized by elemental analysis, FTIR, and ²⁹Si NMR and ¹³C‐NMR spectroscopy; the results showed that the C?C groups were successfully grafted on the surface of the silica nanoparticles and the grafted substance was mostly the oligomer formed by the hydrolysis and condensation reaction of MPS. Silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were prepared via seed emulsion polymerization using the MPS‐modified silica nanoparticle as seed, tert‐butylmethacrylate as monomer and ethyleneglycol dimethacrylate as crosslinker. Their core/shell nanocomposite structure and chemical composition were characterized by means of TEM and FTIR, respectively, and the results indicated that silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were obtained.     

New insights into the adsorption of 3-(trimethoxysilyl)propylmethacrylate on hydroxylated ZnO nanopowders

Functionalization of zinc oxide (ZnO) nano-objects by silane grafting is an attractive method to provide nanostructured materials with a variety of surface properties. Active hydroxyl groups on the oxide surface are one of the causes governing the interfacial bond strength in nanohybrid particles. Here, "as-prepared" and commercially available zinc oxide nanopowders with a wide range of surface hydroxyl density were functionalized by a well-known polymerizable silane coupling agent, i.e., 3-(trimethoxysilyl)propylmethacrylate (MPS). Fourier transform infrared (FTIR) and solid-state (13)C and (29)Si nuclear magnetic resonance (NMR) spectroscopic investigations demonstrated that the silane coupling agent was fully hydrolyzed and linked to the hydroxyl groups already present on the particle surface through covalent and hydrogen bonds. Due to a basic catalyzed condensation of MPS with water, a siloxane layer was shown to be anchored to the nanoparticles through mono- and tridentate structures. Quantitative investigations were performed by thermogravimetric (TGA) and elemental analyses. The amount of silane linked to ZnO particles was shown to be affected by the amount of isolated hydroxyl groups available to react on the particle surface. For as-prepared ZnO nanoparticles, the number of isolated and available hydroxyl groups per square nanometer was up to 3 times higher than the one found on commercially available ZnO nanoparticles, leading to higher amounts of polymerizable silane agent linked to the surface. The MPS molecules were shown to be mainly oriented perpendicular to the oxide surface for all the as-prepared ZnO nanoparticles, whereas a parallel orientation was found for the preheated commercially ZnO nanopowders. In addition, ZnO nanoparticles were shown to be hydrophobized by the MPS treatment with water contact angles higher than 60°.     

Immobilization of calix[6]arene bearing carboxylic acid and amide groups on aminopropyl silica gel and its sorption properties for Cr(VI)

An aminopropyl silica gel-immobilized calix[6]arene (C[6]APS) containing both amide and acid moieties was prepared from p-tert-butylcalix[6]arene hexacarboxylate derivative and aminopropyl silica gel in the presence of N,N′-diisopropyl carbodiimide coupling reagent. C[6]APS was used to evaluate the sorption properties of Cr(VI) as a sorbent material. In sorption studies, it was observed that C[6]APS was highly effective at pH 1.5 for Cr(VI). The effect of parameters such as pH, sorbent dosage, contact time, initial Cr(VI) concentration and temperature on Cr(VI) sorption; the sorption isotherms were also studied. Maximum sorption capacity was obtained as 3.1 mg g^?1 at pH 1.5 and 25 °C for 1 h and 10.4 mg L^?1 initial Cr(VI) concentration. Thermodynamic parameters such as change in free energy, enthalpy, and entropy were also determined. In the isotherm studies, Langmuir and Freundlich isotherm models were applied and it was found that the experimental data confirmed to Freundlich isotherm model, and the batch sorption capacity of C[6]APS was calculated as 37.66 mg g^?1.     

Suspension Polymerization of Methyl Methacrylate Stabilized Solely by Palygorskite Nano Fibers简

A kind of fibrous clay, palygorskite(PAL), was used as the sole stabilizer in suspension polymerization without the using of any other stabilizer usually used, especially polymeric stabilizers. In order to improve the compatibility with the organic monomer, PAL nano fibers were organically modified with silane coupling agent methacryloxypropyltrimethoxysilane(MPS). Transmission electron microscopy(TEM) and Fourier-transform infrared(FTIR) spectroscopy results show that the hydrolyzed MPS was attached onto PAL surface through Si―O―Si bonds formation without morphology change of PAL. At a loading amount of PAL to monomer as low as 0.36 wt%, effective stabilization could be achieved. After suspension polymerization, spherical poly(methyl methacrylate)(PMMA) particles were obtained. Scanning electron microscopy(SEM) analysis on both the outer surface and the inner cracked surface of the spherical PMMA particles indicates that the PAL particles reside on the surface of the PMMA spheres. The densely stacked PAL together with attached silane coupling agent stabilized the droplets throughout the suspension polymerization.     

Synthesis and Properties of Hyperbranched Polyimides Combined with Silica

Summary: The novel hyperbranched polyimide - silica hybrid materials containing theoretically 16 wt% of an inorganic phase were prepared via a sol-gel process. An amine terminated polyimide precursor (hyperbranched polyamic acid) was prepared from commercially available monomers 4,4′,4″-triaminotriphenylmethane and 4,4′-oxydiphthalic anhydride in molar ratio 1:1. Tetramethoxysilane and/or 3-glycidoxypropyltrimethoxysilane (also used as a coupling agent) were used as silica precursors. During thermal exposition the polyimide precursor was transformed to hyperbranched polyimide and hydrolyzed alkoxy groups reacted mutually to form silica. The final products were self-standing films, whose structure was characterized by using IR and ¹³C and ²⁹Si solid state NMR spectroscopy. The influence of the amount of silica and/or coupling agent on their structure and thermal properties was described.     

Chemical deposition and characterization of thin polypyrrole films on glass plates: role of organosilane treatment

 Thin chloride-doped polypyrrole films (PPyCl) were deposited chemically onto untreated and silane-treated planar glass plates from aqueous solutions. The organosilanes used to treat the glass substrates were methyltriethoxysilane (Cl), propyltrimethoxysilane (C3), octyltrimethoxysilane (C8) and aminopropyltriethoxysilane (APS). The decreasing order of hydrophobic character of silane-treated glass slides, as measured by water contact angle measurements, was glass–APS ≅ glass–C8 > glass–C3 > glass–C1 > glass. X-ray photoelectron spectroscopy was used to determine the surface chemical composition of the glass plates before and following coating with the silane coupling agents and/or the PPy thin layer, respectively. The attenuation in intensity of the glass Na_{1 s} peak enabled the average thickness of the various organosilane overlayers to be estimated. Atomic force microscopy showed that the morphology of the organosilane overlayers was islandlike. The domains have a structure which depends upon the nature of the organosilane in question. Scanning electron microscope images showed that the morphology of the PPyCl thin films was homogeneous when coated onto glass–APS and glass–C8, but wrinkled at the surface of glass, glass–C1 and glass–C3 plates. Qualitative peel tests using 3M adhesive tape showed very good adhesion of PPyCl to the glass–APS substrate, whereas adhesion was fairly poor in the case of glass–PPy and PPy–alkylsilane–glass interfaces. The results of this multitechnique study suggest that hydrophobic interactions are important to obtain homogeneous and continuous thin PPy films, but Lewis acid–base interactions are the driving forces for strong and durable PPy–glass adhesion. Received: 3 January 2000/Accepted: 19 May 2000