Chemical oxidative polymerization of aminodiphenylamines

The course of oxidation of 4-aminodiphenylamine with ammonium peroxydisulfate in an acidic aqueous ethanol solution as well as the properties of the oxidation products were compared with those of 2-aminodiphenylamine. Semiconducting oligomers of 4-aminodiphenylamine and nonconducting oligomers of 2-aminodiphenylamine of weight-average molecular weights 3700 and 1900, respectively, were prepared by using an oxidant to monomer molar ratio of 1.25. When this ratio was changed from 0.5 to 2.5, the highest conductivity of oxidation products of 4-aminodiphenylamine, 2.5 x 10 (-4) S cm (-1), was reached at the molar ratio [oxidant]/[monomer] = 1.5. The mechanism of the oxidative polymerization of aminodiphenylamines has been theoretically studied by the AM1 and MNDO-PM3 semiempirical quantum chemical methods combined with the MM2 molecular mechanics force-field method and conductor-like screening model of solvation. Molecular orbital calculations revealed the prevalence of N prim-C10 coupling reaction of 4-aminodiphenylamine, while N prim-C5 is the main coupling mode between 2-aminodiphenylamine units. FTIR and Raman spectroscopic studies confirm the prevalent formation of linear N prim-C10 coupled oligomers of 4-aminodiphenylamine and suggest branching and formation of phenazine structural units in the oligomers of 2-aminodiphenylamine. The results are discussed with respect to the oxidation of aniline with ammonium peroxydisulfate, leading to polyaniline, in which 4-aminodiphenylamine is the major dimer and 2-aminodiphenylamine is the most important dimeric intermediate byproduct.     

Chemical oxidative polymerization of dianilinium 5-sulfosalicylate

Dianilinium 5-sulfosalicylate was prepared in situ and then oxidized in aqueous solution with ammonium peroxydisulfate. The precipitated polyaniline 5-sulfosalicylate was soluble in polar aprotic solvents and showed conductivity of ∼0.1 S cm⁻¹. Scanning electron microscopy revealed the coexistence of nanorods and granular morphology of the polyaniline 5-sulfosalicylate. The weight-average molecular weight and poly-dispersity index were determined by gel-permeation chromatography as 53000 and 9.0, respectively. FTIR spectroscopic analysis combined with AM1 and MNDO-PM3 semi-empirical quantum chemical studies of the polymerization mechanism indicate both covalent and ionic bonding of sulfosalicylate to polyaniline chains. Raman spectroscopy proved the presence of substituted phenazine structural units besides ordinary emeraldine segments. The text was submitted by the authors in English.     

Chemical trapping experiments support a cation-radical mechanism for the oxidative polymerization of aniline

The oxidative polymerization of aniline in aqueous acidic solution was carried out in the presence of a variety of organic compounds as potential traps for postulated intermediates. The polymerization was inhibited by hindered phenols and electron-rich alkenes, traps for cation-radicals. However, polyaniline was still obtained in the presence of electron-rich arenes, such as 1,3-dimethoxybenzene and 1,4-dimethoxybenzene, known as excellent receptors of nitrenium ions. Polymerization of N-phenyl-1,4-phenylenediamine was similarly carried out in the presence of potential traps. Polyaniline containing an N-phenyl group was obtained in the presence of 1,3-dimethoxybenzene and 1,4-dimethoxybenzene. Hindered phenols and 4-methoxystyrene only slightly inhibited polymerization of N-phenyl-1,4-phenylenediamine which most probably proceeded by way of the stable diarylamino radical. Copolymerization of aniline with 10 wt % of N-phenyl-1,4-phenylenediamine in the presence of these traps gave similar results to the polymerization of pure aniline. These results have led to the proposed cation-radical polymerization mechanism of aniline, in which the polymerization is a chain growth reaction through the combination of a polymeric cation-radical and an anilinium cation-radical. Step growth character is also present when a polymeric aminium cation-radical end combines with a diarylaminoended polymer. The copolymerization of N-phenyl-p-phenylenediamine can also occur by reaction of aniline cation-radical with a polyarylamine radical. The nitrenium mechanism was further rejected by the fact that attempted polymerization of N-phenylhydroxylamine, which forms authentic nitrenium ions in acid, failed to give polymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2569–2579, 1999     

Interfacial oxidative polymerization of phenothiazine

Phenothiazine polymers have been prepared for the first time by interfacial oxidative polymerization. Effects of the concentration and ratio of reagents, temperature, and time of reaction on the yield and molecular mass characteristics of polyphenothiazine are investigated. The study of phenothiazine oxidation indicates that high-molecular-mass products can be prepared if this reaction is carried out in the absence of acids, in contrast to the classical oxidative polymerization of aniline. It is shown that phenothiazine polymers are characterized by a low oxidation state. IR spectroscopy is employed to investigate the chemical structure of the polymers as depending on the synthesis conditions. The propagation of polyphenothiazine chains occurs via the C-C addition in para positions of phenyl rings relative to nitrogen.     

Peroxidase-based oxidative polymerization of monolignols

Oxidative polymerization of the monolignols (sinapyl alcohol [SA] and coniferyl alcohol [CA]) has been performed using enzyme-based biocatalysts. The oxidation of SA, CA, or an SA/CA mixture has been carried out using peroxidase enzyme–assisted H₂O₂/t-BHP (oxidation reagent). The reaction provided radicals with high reactivity, in turn yielding a variety of polymeric structures. The efficiency of the oxidative polymerization system has been evaluated in terms of substrate conversion. Also, the polymeric products were characterized with the gel permeation chromatography technique (GPC). Accordingly, optimum experimental parameters have been set up (e.g. temperature, type of peroxidase enzyme, and oxidation reagent). Under optimum conditions, a maximum of 90% of the SA was transformed to polymeric products with MW = 3188 Da, Mn = 1115 Da, and PD = 2.8.     

Chemical oxidative polymerization of m-phenylenediamine and its derivatives using aluminium triflate as a co-catalyst

Aromatic diamine monomers, including m-phenylenediamine (mPD), 2-methyl-m-phenylenediamine (2Me-mPD), 4-methyl-m-phenylenediamine (4Me-mPD) and trimethyl-m-phenylenediamine (tMe-mPD), were polymerized by chemical oxidation using ammonium persulfate as an oxidant. Aluminium triflate (Al(OTf)₃) was also used for the first time as a co-catalyst under various polymerization conditions. The polymerization yield was improved when Al(OTf)₃ was introduced to the polymerization reaction for most polymers. The poly(2-methyl-m-phenylenediamine) (P(2Me-mPD)), poly(4-methyl-m-phenylenediamine) (P(4Me-mPD)) and poly(trimethyl-m-phenylenediamine) (P(tMe-mPD)) polymers exhibited better solubility than poly(m-phenylenediamine) (P(mPD)) polymers in most common solvents. The homopolymers obtained were characterized by FT-IR, ¹H and ¹³C NMR, WAXD and TGA. The results showed that the yield, solubility and structure of the polymers are significantly dependent on the polymerization conditions. TGA measurements indicated that the polymers have good thermal stability and decompose above 400 °C in nitrogen.     

Preparation of conductive polybenzoxazines by oxidative polymerization

Soluble and thermally curable conducting high molecular weight polybenzoxazine precursors were prepared by oxidative polymerization 3‐phenyl‐3,4‐dihydro‐2H‐benzo[e][1,3] oxazine (P‐a) alone and in the presence of thiophene (Th) with ceric ammonium nitrate in acetonitrile. The structure of the precursors was confirmed by FTIR, ¹H NMR, and DSC measurements, indicating the presence of a cyclic benzoxazine structure, together with small but varying amount of a ring opened phenolic structure. The resulting polymers exhibit conductivities around 10^?2 S cm^?1 and undergo thermal curing at various temperatures. Attempts to copolymerize P‐a with another electroactive monomer, pyrrole (Py), by a similar redox process were unsuccessful, which was attributed to the unfavourable oxidation potential of Py. The cured products exhibited high thermal stability but lower conductivity, than those of the precursors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 999–1006, 2007     

Partial oxidation and oxidative polymerization of metallothionein

One mechanism for regulation of metal binding to metallothionein (MT) involves the non-enzymatic or enzymatic oxidation of its thiols to disulfides. Formation and speciation of oxidized MT have not been investigated in detail despite the biological significance of this redox biochemistry. While metal ion-bound thiols in MT are rather resistant towards oxidation, free thiols are readily oxidized. MT can be partially oxidized to a state in which some of its thiols remain reduced and bound to metal ions. Analysis of the oxidation products with SDS-PAGE and a thiol-specific labeling technique, employing eosin-5-iodoacetamide, demonstrates higher-order aggregates of MT with intermolecular disulfide linkages. The polymerization follows either non-enzymatic or enzymatic oxidation, indicating that it is a general property of oxidized MT. Supramolecular assemblies of MT add new perspectives to the complex redox and metal equilibria of this protein.     

Kinetics and mechanism of oxidative polymerization of phenylenediamines

Kinetics of oxidative polymerization of three isomeric phenylenediamines in aqueous hydrochloric acid solutions initialed by ammonium persulfate has been studied, and kinetic parameters of non-catalytic and catalytic stages of polymerization have been determined. The observed effect of the isomeric substrates structure on the activation energy of the catalytic and non-catalytic stages has been explained.     

Polytriphenylamines synthesized by interfacial and microemulsion oxidative polymerization

Two triphenylamine-based polymers were successfully prepared by the interfacial and microemulsion oxidative polymerization of triphenylamine and 4-(diphenylamino)benzyl 2-bromo-2-methylpropanoate. Ammonium peroxodisulfate ((NH₄)₂S₂O₈) was used as a chemical oxidant and dichloromethane/water was used as a solvent. Sodium dodecyl benzene sulfonate was employed as a surfactant in the microemulsion system. Polytriphenylamines were characterized via Fourier transform infrared (FTIR) spectra and ¹H-NMR and UV–vis absorption spectroscopy. Molecular weights were determined by gel permeation chromatography and redox properties were studied by cyclic voltammetry. The surface morphology of thin polymer films was determined by atomic force microscopy.     

Synthesis and oxidative polymerization of dialkyl fluorene-9,9-dicarboxylates

Novel long-chain dialkyl fluorene-9,9-dicarboxylates were synthesized by treating fluorene with lithium diisopropylamide followed by alkyl chloroformates. The fluorene derivatives were readily electro-oxidized to form electroactive films on the surface of a glassy carbon electrode. From the viewpoint of suitable potential window (from −2.5 to 1.5 V vs Ag/Ag⁺), cyclic voltammograms of the films indicated the electroactive properties of the fluorene derivatives that make them good candidates for electrochemical capacitor materials.     

Thermal stability of polydiphenylamine synthesized through oxidative polymerization of diphenylamine

The thermal stability of polydiphenylamine synthesized through the oxidative polymerization of diphenylamine has been studied. It has been established that the main processes of thermal and thermooxidative degradation of polydiphenylamine begin at 600–650 and 450°C, respectively. It has been shown that, in the course of thermal oxidation of the doped polydiphenylamine, the elimination of a dopant takes place first. With a further increase in temperature, the behavior of this material becomes similar to that of the neutral polymer.     

Thermal oxidative degradation of polymethacrylates synthesized by pseudoliving radical polymerization

The kinetics of degradation of polymethyl methacrylate, polybutyl methacrylate, and poly-2,2,3,3-tetrafluoropropyl methacrylate synthesized by pseudoliving radical polymerization at 270 C in air in the presence of bis(triphenylphosphine)(3,6-di-tert-butyl-1,2-semiquinolato)copper(I) was studied. The possibility of improving the thermal treatment of the resulting polymers was revealed.     

Chemical and structural modification of polymers by matrix polymerization

The condensation polymerization of urea and formaldehyde in water in the presence of a macromolecular matrix, polyacrylic acid, as well as properties of composites obtained by the matrix polymerization, have been studied. The chemical structure of the urea-formaldehyde polymer was changed by the presence of the matrix. The products of matrix polymerization are composites consisting of a stoichiometric polycomplex of polyacrylic acid with the urea-formaldehyde polymer and an excess of one of the components, depending on the initial composition of the system. Introduction of matrix macromolecules into the reacting system leads to a fibrillized structure of the urea-formaldehyde polymer. The polycomplex, as well as composites with high content of polyacrylic acid, are glasses characterized by high compressive strength and ability to forced elastic deformation. They swell in water. The highly cooperative character of potentiometric titration curves for swollen gels and the quantitative yield in intermolecular amidation indicate an ideal structure of the polycomplex stabilized by hydrogen and ionic-type bonds.     

Self-organization of polyaniline during oxidative polymerization: formation of granular structure

The paper is focused on oxidative polymerization of aniline proceeding in an acid medium with a strong oxidant; formation of polyaniline (PANI) granular structures in different steps of the synthesis was studied. The relationship between the processes of self-organization of the growing polymer into supramolecular structures and the steps of molecular synthesis has been revealed. It was shown that during the induction period (the initial synthesis step), insoluble non-conducting products are formed. They are characterized by the absorption band at 430 nm corresponding to the wavelength of the phenazinium cation radical peak. In the second step, the polymer chain growth, conducting PANI granules with the diameter of 50 nm were obtained. These granules consist of spherical particles with the diameter as small as several nanometers. Then, the granule dimensions increased to 200 nm due to the growth of the spheres; the sphere diameter reached 20 nm. The number of spheres in a granule remained constant. Both precipitate and PANI film consist of common structural elements, polymer spheres, organized into granules and larger structures. Suppression of the polymer chain growth leads to the formation of non-conducting aniline oligomers which are self-organized into large particles with fractal structure. To describe the self-organization processes of a growing polymer chain, the diffusion-limited aggregation mechanism was used.