Si-Kernresonanzspektren und synthese von bromdisilanen und ioddisilanen

The syntheses of Bromodisilanes Br_nSi₂H_6−n and Iododisilanes I_nSi₂H_6−n (n = 1, 2, 3, 4, 5), starting from caryldisilanes Ar_nSi₂H_6−n (Ar = phenyl, -naphthyl, mesityl) are reported. The ²⁹Si-NMR-spectra of all compounds, including ²⁹Si²⁹Si-coupling constants, have been measured.

Zusammenfassung

Ausgehend von Aryldisilanen ArS₂H_6−n, (Ar = Phenyl, -Naphthyl, Mesityl) wurden die Bromdisilane Br_nSi₂H_6−n, und Ioddisilane I_nSi₂H_6−n, (n = 1, 2, 3, 4, 5) synthetisiert. Die ²⁹Si-NMR-Spektren aller Verbindungen, (eingeschlossen ²⁹Si²⁹Si-Kopplungskonstanten) wurden vermessen.     

Time-resolved spectroscopy of long-path fluorescence and scattering for measuring total absorption of fluids

Optical methods are appropriate tools to detect organic micro-pollutants in fluids. A new technique is introduced which uses the decay of interaction processes like fluorescence and elastically scattered radiation by a fluid. Principally two different parameters are determined:

1. (i) the decay-time of the conventional interaction τ_C, which occurs at relatively short path-lengths of the incidence beam in the fluid, and

2. (ii) the decay-time τ_MP of the multi-path-saturation interaction originating at long path-lengths, e.g. in multi-path-reflection cuvettes, where the incidence beam is fully absorbed by the fluid.

A relation between the decay-time and the absorption coefficient of a fluid is theoretically derived. A simple preliminary experiment is performed considering distilled water polluted with non-fluorescent azobenzene and fluorescent quinine-sulphate. A nitrogen laser has been used to generate the fluorescence and scattering signals. The reciprocal value of the difference between the decay-time of the multi-path and conventional signals, 1/(τ_MP − τ_C), yields the total absorption coefficient directly. In comparison to the conventional absorption technique the decay-time method is characterized by a higher sensitivity.     

La-NMR-spektroskopie an allyllanthan(III)-komplexen

¹³⁹La-NMR chemical shifts were measured for several anionic complexes of formulae Li(C₄H₈O₂)_3/2 [La(ν³-C₃H₅)₄], [Li(C₄H₈O₂)₂][Cp′_nLa(ν³-C₃]H₅)_4−n] (Cp′ = Cp(ν⁵-C₅H₅); n = 1, 2 and Cp′ = Cp * (ν⁵-C₅Me₅); N = 1) and Li[R_nLa(ν³-C₃H₄)₄−n] (R = N(SiMe₃)₂; n = 1, 2 and R = CCsIMe₃; n = 4), as well as for neutral compounds for formulae La(ν³-C₃H₅)₃L_n (L = (C₄H₈O₂)_1.5, (HMPT)₂, TMED), Cp′_nLa(ν³-C₃H₅)_3−n (Cp′= Cp(ν⁵-Cp₅H₅), Cp *(ν⁵-C₅Me₅); n = 1, 2) and La(ν³-C₃H₂)₂X(THF)₂ X = Cl, Br, I). Typical ranges of the ¹³⁹La-NMR chemical shifts were found for the different types of complex independent of number and kind of organyl groups directly bonded to lanthanum.

Zusammenfassung

¹³⁹La-NMR-Spektroskopie wurde an einer Reihe anionischer Allyllanthanat(III)-Komplexe der Zusammensetzung ]- [La)ν³-C₃H₅)₄, [Li(C₄H₈)₂][Cp′_nLa(ν³-C₃H₅)_4−n(Cp′ = Cp(ν⁵-C₅H₅); n = 1, 2 und Cp′ = Cp * (ν⁵-C₅Me₅); N = 1) und Li[R_nLa(ν³-C₃H₅)_4−n (R = B(SiMe₃)₂; n = 1, 2 und R = CCSiMe₃; n = 4 sowie neutraler Allyllanthan(III)-Komplexe der Zusammensetzung La(ν³-C₃H₅)₃L_n (L_n = (C₄H₈O₂)_1.5, (HMPT)₂, TMED), Cp′_n, La(ν³-C₃H₅)_3−n (Cp′ = Cp(ν⁵-C₅H₅), Cp * (ν⁵- Cp₅Me₅); n = 1, 2) und La(ν³-Cp₃H₅)₂X(THF)₂ (X = Cl, Br, I) durchgefürt. In Abhängikeit von der Anzahl und der Art der am Lanthan gebundenen Gruppen wurden für die verschieden Komplextypen charakteristische Resonanzbereiche ermittelt.     

A new synthetic route to aminophosphines

The reactions of R₂PPR₂ (R = Me, Et, Ph) and (MeP)₅ with Me_3−nAs(NMe₂)_n (n = 1, 2, 3) and of Me₂PPMe₂ with Me₂AsNR′₂ (R′ = Et, Prⁿ, and Prⁱ) were investigated as a function of time at room temperature using ¹H and ³¹P NMR spectroscopy. For the diphosphine/Me₂AsNR′₂ reactions, the NMR spectral data suggest a reaction pathway involving the initial formation of R₂PAsMe₂ and the respective acyclic dialkylaminophosphine, R₂PNR′₂. The P---As intermediate then symmetrizes to R₂PPR₂ and Me₂AsAsMe₂, the parent aminoarsine is completely consumed, and additional R₂PNR′ is formed. The relative rate of aminophosphine production is dependent upon the nature of the substituent on the phosphorus and nitrogen atoms. For systems involving MeAs(NMe₂)₂ and As(NMe₂)₃ as reactants, the intermediates could not be characterized, but the products were the expected aminophosphine and (MeAs)₅ or elemental arsenic, respectively. (MeP)₅ reacts to give MeP(NMe₂)₂ and the expected As---As bonded species. A comparison of the reactivity of these systems with analogous diarsine/aminoarsine systems is discussed. The results of the NMR study were utilized in designing a convenient, high yield, synthetic route to acyclic aminophosphines.     

Synthesis and characterization of 1,3,4-oxadiazole derivatives containing alkoxy chains with different lengths

The synthesis, optical properties, electrochemical properties, electronic structures and applications in electroluminescent device of three series of 1,3,4-oxadiazole derivatives, 1,4-bis[(4-methylphenyl)-1,3,4-oxadiazolyl]phenylene (OXD₁), 5,5′-di-(4-methyl)-2,2′-p-(2,5-bisalkoxyphenylene)-bis-1,3,4-oxadiazole (OXD_2–n) and 1,4-bis[(4-alkoxyphenyl)-1,3,4-oxadiazolyl]phenylene (OXD_3–n) are reported. The molecular structures of the oxadiazole compounds were confirmed by FT-IR, ¹H NMR spectroscopy and elemental analysis. The optical and electrochemical properties of the compounds were investigated by UV–vis absorption and photoluminescence spectroscopy as well as cyclic voltammetry. The results show that introduction of two alkoxy groups whose electron-donating ability is stronger than that of methyl groups increases the electron density of the conjugated segment of OXD_2–n (with side-on alkoxy substituents) and OXD_3–n (with end-on alkoxy substituents), and thus leads to the absorption maximum bathochromic-shift compared to that of OXD₁. The HOMO and LUMO energy levels of the compounds studied are in the range of −2.78 to −2.89 and −5.75 to −6.20 eV. Calculations on the representative compounds by the Dmol³ package of MS Modeling 3.0 revealed that the increase of energy levels in both OXD_2–n and OXD_3–n was due to the change of the frontier molecular orbital distribution in the central benzene ring. The light-emitting devices have been fabricated using blends of MEH-PPV and these compounds as emissive layers, among which, maximum brightness up to 11810 cd m⁻² (8.5 V) has been observed, which is 40 times brighter than that with MEH-PPV. The result of the devices suggested that oxadiazole derivatives studied function well as electron-transporting materials and can be used in LEDs, and thus to enhance the efficiency of LEDs.     

Calorimetric study of the adducts CdBr2·nL (n = 1 and 2; L = ethyleneurea and propyleneurea)

A calorimetric study was performed for adducts of general formula CdBr₂·nL (n=1 and 2; L=ethyleneurea (eu) and propyleneurea (pu)). The standard molar reaction enthalpy in condensed phase: CdBr₂(c)+nL(c)=CdBr₂·nL(c); Δ_rH_m^θ, were obtained by reaction–solution calorimetry, to give the following values for mono- and bis-adducts: −19.54 and −34.59; −7.77 and −19.05 kJ mol⁻¹ for eu and pu adducts, respectively. Decomposition (Δ_DH_m^θ) and lattice (Δ_MH_m^θ) enthalpies, as well as the mean cadmium---oxygen bond dissociation enthalpy, DCd---O, were calculated for all adducts.     

Pseudoelementverbindungen IX. Organostannylierung von Cyanamidonitrat — Molekül- und Kristallstruktur von N-Trimethylstannyl-N′-nitro-carbodiimid

Considered under the aspect of its ambidence, the reactivity of cyanamidonitrate [NO₂NCN]⁻ towards triorganostannyl chlorides was investigated. The reaction products of type R₃Sn-NCN-NO₂ were characterized by ¹H-NMR, ¹³C-NMR, ¹¹⁹Sn-NMR and IR spectroscopy. While cyanamides of the type [R_nE(Y)NCN]⁻ (R_nE(Y) = RC(O), RC(NCN), R₂ P(O), R₂P(S), R₂P(NCN), RSO₂) are coordinated exclusively either via the terminal nitrogen (monodentately) or via both the nitrile group end on and the chalcogen atom (bidentately), we found N-triorganostannyl-N′-nitro-carbodiimides as the first example in which the NCN group acts as a bidentate bridge with metal-N bonds in 1- and 3-position. For Me₃Sn-NCN-NO₂ the crystal structure was determined.

Zusammenfassung

Unter dem Aspekt der Ambidenz wurde die Reaktivität von Cyanamidonitrat [NO₂NCN]⁻ gegenüber Triorganostannylchloriden untersucht. Die Reaktionsprodukte des Typs R₃Sn-NCN-NO₂ wurden ¹H-NMR-, ¹³C-NMR-, ¹¹⁹Sn-NMR- sowie IR-spektroskopisch charakterisiert. Während Cyanamide des Typs [R_nE(Y)NCN]⁻ (R_nE(Y) = RC(O), RC(NCN), R₂P(O), R₂P(S), R₂P(NCN), RSO₂) ausschlieβlich über das terminale Stickstoff- (einzähnig) bzw. über das Nitrilstickstoff- und das Chalkogenatom (zweizähnig) gebunden werden, fanden wir mit N-Triorganostannyl-N′-nitro-carbodiimiden erstmalig Beispiele, in denen die NCN-Gruppe zweizähnig verbrückend in 1- und 3-Position koordiniert wird. Für Me₃Sn-NCN-NO₂ liegt eine Kristallstrukturbestimmung vor.     

Molecular motion and phase transition in perovskite-type (CH3)nNH4−nSnCl3 (n=1–4) studied by proton NMR spin–lattice relaxation

Powder X-ray diffraction, ¹¹⁹Sn NMR spectra, and ¹H NMR spin–lattice relaxation times, T₁, were measured for (CH₃)_nNH_4−nSnCl₃ (n=1–4). From the Rietveld analysis, it is shown that all four compounds crystallize into deformed perovskite-type structures at room temperature. The temperature dependence of ¹H T₁ was analyzed in terms of the CH₃ reorientation and other motions of the whole cation. Except for the phase transition in CH₃NH₃SnCl₃, which is from monoclinic to rhombohedral at 331 K, ¹H T₁ was continuously changed at other phase transitions in this compound as well as in the n=2–4 compounds, suggesting that the transitions are not caused by the change of the motional state of the cation but by an instability of the [SnCl₃]_nⁿ⁻ perovskite lattice.     

Dehydrocoupling reactions of amines with silanes catalyzed by [(Et2N)3U][BPh4]

Dehydrocoupling reactions of primary amines RNH₂ with PhSiH₃ were catalyzed by [(Et₂N)₃U][BPh₄] to give the corresponding aminosilanes PhSiH_3−n(NHR)_n (n=1–3), the relative yields of the products were found to be dependent on the experimental conditions and on the nature of R. For a primary silane (PhSiH₃), the reactivity of RNH₂ follows the order primary>secondary>tertiary. Similar dehydrocoupling reactions using secondary amines with secondary silanes were found to be less reactive. Homodehydrocoupling of the silane was found not to be a competing reaction at room temperature. The hydride [(RNH)₂UH][BPh₄], which is plausibly formed in the reaction of [(RNH)₃U][BPh₄] with PhSiH₃ is a likely intermediate in the catalytic cycle.     

Hartree-fock and Hückel-like orbital energies: an elementary extension to Koopmans‘ theorem

For a closed-shell MO configuration with 2n electrons which occupy n non-degenerate canonical MOs, it is deduced that the RHF energy, Σⁿ_i=1[2H⁰_n+Σⁿ_j-1(2J_ij-K_ij)], may be expressed in Hückel-like form as 2Σⁿ_i-1ε, −Σⁿ_i-1[j_i(λ+1)+1,(λ+2)] with λ=2(n-i). The l_i(λ+1) and I_i(λ+2) are the ionization potentials for the HOMO ψ, which arises after λ and λ+1 electrons have been successively removed from the initial configuration.     

Vibration-rotation spectra of C containing acetylene: anharmonic resonances

High resolution vibration-rotation spectra of ¹³C₂H₂ were recorded in a number of regions from 2000 to 5200 cm⁻¹ at Doppler or pressure limited resolution. In these spectral ranges cold and hot bands involving the bending-stretching combination levels have been analyzed up to high J values. Anharmonic quartic resonances for the combination levels ν₁ + mν₄ + nν₅, ν₂ + mν₄ + (n + 2) ν₅ and ν₃ + (m − 1) ν₄ + (n + 1) ν₅ have been studied, and the l-type resonances within each polyad have been explicitly taken into account in the analysis of the data. The least-squares refinement provides deperturbed values for band origins and rotational constants, obtained by fitting rotation lines only up to J ≈ 20 with root mean square errors of ≈ 0.0003 cm⁻¹. The band origins allowed us to determine a number of the anharmonicity constants x_ij⁰.     

Polarized absorption spectra and polarized Raman spectra of single crystals of trans(Cl2)-[CoCl2(NH3)n(H2O)4−n]Cl complexes (n = 2, 3, 4)

The title cobalt(III) complexes have been investigated by polarized absorption and Raman spectroscopies of the single crystals. The symmetry properties of the d-electron orbitals and of the vibrational modes attributable to the Raman bands of trans(Cl₂)-[CoCl₂(NH₃)_n(H₂O)_4−n]Cl complexes (n = 2, 3, or 4) were examined to elucidated the peculiar observation that ligand substitution causes no splitting of the 15 200-cm⁻¹ absorption band and the 250-cm⁻¹ Raman band. Effects of replacing the NH₃ ligand with H₂O on the electronic structure, atom–atom force constants and vibrational modes of these complex ions are briefly described.     

First principles study of the structure, electronic state and stability of SinCm anions

Structure, electronic state and energy of Si_nC⁻ and Si_nC⁻₂ (n=1–7) anions have been investigated using the density functional theory. Structural optimization and frequency analysis are performed at the level B3LYP/6-311G(d). The charged-induced structural changes in these anions have been discussed. The strong C–C bond is also favored over C–Si bonds in the Si_nC⁻_m anions in comparison with corresponding neutral cluster. Among different Si_nC⁻ and Si_nC⁻₂ (n=1–7) anions, Si₃C⁻, Si₅C⁻ and Si₂C⁻₂ are most stable. Their stability has a decreasing tendency with the increase in the size of these clusters.     

Synthesis of ferrocenyl-1,2-diketones and related compounds: Crystal and molecular structures of 1,2-diferrocenylethanedione and 1-ferrocenyl-2-(4-biphenylyl) ethanedione

Ferrocenyl-1,2-diketones FcCOCOR, 3, [Fc = (C₅H₅)Fe(C₅H₄)] can be prepared by oxidation of acylferrocenes FcCOCH₂R or, more efficiently, by oxidation of the isomeric ketones FcCH₂COR, 2. The ketones 2 are in turn readily synthesized from the salt (FcCH₂PPh₃)⁺I⁻ via the acylated salts [FcCH(COR)PPh₃]⁺I⁻. The haloacylferocenes FcCOCCl_x H_3−x (x = 1, 2, 3, of which the x = 2 example is synthetically equivalent to a diketone) are synthesized by Friedel—Crafts acylation of ferrocene using CCl_xH_3−xCOCl/AlCl₃, but the reaction proceeds via two parallel pathways, one giving the normal acyl derivatives FcCOCCl_xH_3−x and the other giving the reduced products FcCOCCl_x−1H_4−x. Two diketones FcCOCOFc 3b and FcCOCOC₆H₄Ph 3c have been structurally characterised by single-crystal X-ray diffraction.     

A spectroscopic study on the 12-heteropolyacids of molybdenum and tungsten (H3PMo12−nWnO40) combined with cetylpyridinium bromide in the epoxidation of cyclopentene

The epoxidation of cyclopentene with hydrogen peroxide catalyzed by 12-heteropolyacids of molybdenum and tungsten (H₃PMo_12−nW_nO₄₀, n = 1–11), 12-tungstophosphoric acid and 12-molybdophosphoric acid combined with cetylpyridinium bromide as a phase transfer reagent was carried out in acetonitrile. Among 13 heteropolyacids investigated, catalyst of H₃PMo₆W₆O₄₀ showed the highest activity, giving a conversion of 60% and a selectivity of 95% in the epoxidation of cyclopentene. The fresh catalysts and the catalysts under reaction condition were characterized by UV–vis, FT-IR and ³¹P NMR spectroscopy, which has revealed that all of the molybdotungstophosphoric acids were degraded in the presence of hydrogen peroxide to form a considerable amount of phosphorus-containing species. The active species resulted from H₃PMo₆W₆O₄₀ are new kinds of phosphorus-containing species, which is different from {PO₄[WO(O₂)₂]₄}³⁻.     

Stabile Bis(η-alkin)MCl2-komplexe; Darstellung und reaktivität

The synthesis and reactivity of {(η⁵-C₅H₄SiMe₃)₂Ti(CCSiMe₃)₂} MCl₂ (M = Fe: 3a; M = Co: 3b; M = Ni: 3c) is described. The complexes 3 are accessible by the reaction of (η⁵-C₅H₄SiMe₃) ₂Ti(CSiMe₃)₂ (1) with equimolar amounts of MCl₂ (2) (M = Fe, Co, Ni). 3a reacts with the organic chelat ligands 2,2′-dipyridyl (dipy) (4a) or 1,10-phenanthroline (phen) (4b) in THF at 25°C to afford in quantitative yields (η⁵-C₅H₄SiMe₃)₂Ti(CSiMe₃)₂ (1) and [Fe(dipy)₂]Cl₂ (5a) or [Fe(phen)₂]Cl₂ (5b). 1/n[Cu^IHal]_n (6) or 1/n[Ag^IHal]_n (7) (Hal = Cl, Br) react with {(η⁵ -C₅H₄SiMe₃)₂Ti(CCSiMe₃)₂}FeCl₂ (3a), by replacement of the FeCl₂ building block in 3a, to yield the compounds {(η⁵-C₅H₄SiMe₃)₂Ti(C CSiMe₃)₂}Cu^IHal (8) or {(η⁵-C₅H₄SiMe₃)₂Ti(CSiMe₃)₂}Ag^IHal (9) (Hal = Cl, Br), respectively. In 8 and 9 each of the two Me₃SiCC-units is η²-coordinated to monomeric Cu^I Hal or Ag^IHal moieties. Compounds 8 and 9 can also be synthesized by the reaction of (η⁵-C₅H₄SiMe₃)₂ Ti(CSiMe₃)₂ (1) with 1/n[Cu^IHal]_n (6) or 1/n [Ag^IHal]_n (7) in excellent yields. All new compounds have been characterized by analytical and spectroscopic data (IR, ¹H-NMR, MS). The magnetic moments of compounds 3 were measured.     

Synthesis and reactivity with sulfur dioxide of manganese(II) complexes containing pyridine-N-oxide and 4-methylpyridine-N-oxide as ligands

The complexes MnL_nX₂(H₂O)_m (L = pyridine-N-oxide, 4-methylpyridine-N-oxide; X = Cl, Br, I, NO₃; n = 2−4; M = 0−4) have been prepared. Most of these complexes react with sulfur dioxide in the solid state and as toluene slurries at room temperature, yielding adducts of different stoichiometry, but an increase in the temperature clearly disfavours the interaction. The iodide derivatives of pyridine-N-oxide show the most interesting behaviour, being those which posses the ability of fixing a major quantity of SO₂. The studies of the reversibility of the reaction (desorption studies) show that none of the adducts fix all the SO₂ in a reversible way and more than one binding mode being present for most of the adducts studied here.     

Aromatic hydrocarbons, carbocyclic ligands spanning several oxidation states in both Main Group and transition elements. Recent advances with early transition d elements

In this paper some synthetic procedures to obtain (η⁶-arene)metal derivatives are reviewed. The metal-atom-arene-vapor co-condensation technique is the most appropriate to generate complexes of polycyclic aromatic hydrocarbons or heterocycles. As far as the aluminium halide-mediated synthesis is concerned, two classes of reaction are observed. When AlX₃ is used with a metal halide in the presence of an aromatic hydrocarbon in the absence of any reducing agent, AlX₃ can function as a dehalogenating agent, to give ionic compounds of general formula [M(η⁶-arene)n](AlX₄)_m, or it can add across the M---X bond with formation of M(μ-X)_nAlX_4−n systems. In both cases the metal displays its typical oxidation state. However, the use of AlX₃ in combination with aluminium (the Fischer-Hafner reducing system) affords ionic or covalent low-oxidation-state metal(η⁶-arene) complexes. Attention is focused on our most recent results concerning the synthesis, properties and reactivity of η⁶-arene derivatives of Group 4 and 5 elements, showing, inter alia, the first example of a tetraarylborate anion behaving as a 12-electron donor to one metal atom and low-valent η⁶-arene compounds as useful reagents in the inorganic and coordination chemistry of the corresponding metal in nonaqueous systems.     

On the origin of the splittings of the ν3(SO4) modes in the specular reflectance IR spectra of gypsum

The IR polarized spectra of gypsum CaSO₄·2H₂O were recorded at incidence angles of approximately 10 and 16 degrees. Band singlet or doublet was observed for the higher frequency ν₃(SO₄²⁻) mode of B_u symmetry type, depending on polarization (n or p). A doublet was observed for the lower frequency ν₃(SO₄²⁻) mode of B_u symmetry type too, irrespectively of the type of polarization. In order to give an explanation for the doublets origin, a model permittivity function was constructed. Quite good agreement exists between the reflectance based on the model permittivity function and the experimentally measured one for the high-frequency doublet. The origin of the lower frequency doublet could not be explained in this way, but may be speculated to result from an Evans type interaction between a combination of a water libration and ν₂(SO₄²⁻), with the lower frequency ν₃(SO₄²⁻) mode.     

Ligand deprotonation significance in the formation of the molybdate ion-malic acid complexes

Using the temperature jump technique, the study of the kinetics of the complexing of oxomolybdate anion with malic acid has been carried out in aqueous solutions of pH 7.15–8.5 at ionic strength 0.1 M (KNO₃) and 25°'C. A reaction scheme for the formation of 1 : 1 complexes is proposed which accounts for the observed relaxation rates.

The significance of the ligand deprotonation on the complexation reaction of MoO₄²⁻ by a single protonated ligand, i.e. MoO₄²⁻+LH^nk→MoO₃(OH)Lⁿ⁻², (where n = 1 -, 2 -, etc), is analysed on the basis of a simple model. A linear correlation between the log k and the pK of the monoprotonated ligand (LH) is found for this reaction when the global process is controlled by the proton transfer from the ligand to an oxogroup, i.e. log k = a - 0.5xpK. It is found that this correlation is satisfied by MoO₄²⁻ and WO₄²⁻. The experimental slopes for these oxyanions are −0.503 and −0.543 respectively, in agreement with the predictions.