On-line Monitoring of Continuous Flow Chemical Synthesis Using a Portable,Small Footprint Mass Spectrometer

For on-line monitoring of chemical reactions (batch or continuous flow), mass spectrometry (MS) can provide data to (1) determine the fate of starting materials and reagents, (2) confirm the presence of the desired product, (3) identify intermediates and impurities, (4) determine steady state conditions and point of completion, and (5) speed up process optimization. Recent developments in small footprint atmospheric pressure ionization portable mass spectrometers further enable this coupling, as the mass spectrometer can be easily positioned with the reaction system to be studied. A major issue for this combination is the transfer of a sample that is representative of the reaction and also compatible with the mass spectrometer. This is particularly challenging as high concentrations of reagents and products can be encountered in organic synthesis. The application of a portable mass spectrometer for on-line characterization of flow chemical synthesis has been evaluated by coupling a Microsaic 4000 MiD to the Future Chemistry Flow Start EVO chemistry system. Specifically, the Hofmann rearrangement has been studied using the on-line mass spectrometry approach. Sample transfer from the flow reactor is achieved using a mass rate attenuator (MRA) and a sampling make-up flow from a high pressure pump. This enables the appropriate sample dilution, transfer, and preparation for electrospray ionization. The capability of this approach to provide process understanding is described using an industrial pharmaceutical process that is currently under development. The effect of a number of key experimental parameters, such as the composition of the sampling make-up flow and the dilution factor on the mass spectrometry data, is also discussed. Figure

?     

Derivatization in mass spectrometry --7. On-line derivatisation/degradation

The review describes on-line derivatization/degradation methods employed in mass spectrometry to solve some structural and analytical problems. Advantages and applications of various positions of reaction systems connected mainly to a mass spectrometer or a gas chromatograph/mass spectrometer are considered. Among these are reaction systems connected directly to the mass spectrometer (reaction mass spectrometry, pyrolysis-mass spectrometry or direct pyrolysis-mass spectrometry); flash-heaters as reactors in gas chromatography/mass spectrometry (GC/MS); in-line chemical reactors located before the chromatographic column [pre-column derivatization/degradation with the use of catalytic reactions, pyrolysis (pyrolysis-GC/MS), degradation in elemental analyzers-isotope ratio mass pectrometry (EA-IRMS)]; on-column derivatization and deuteration; reactor located between the chromatographic column and a mass spectrometer [post-column catalytic derivatization, gas chromatograph-combustion-isotope ratio mass spectrometer (GC-c-IRMS)]. Post-column derivatization in high performance liquid chromatography/mass spectro-metry is briefly mentioned. Application of such on-line methodology to structure elucidation of low molecular mass compounds and polymers, to the determination of isotope ratios of the most common elements, to the investigation of catalytic reactions is discussed..     

The mechanism of Sandmeyer's cyclization reaction by electrospray ionization mass spectrometry

Using electrospray ionization (tandem) mass spectrometry (ESI-MS(/MS)) spectrometric experiments, the Sandmeyer reaction was monitored on-line, and key intermediates were intercepted and characterized for the first time. The mechanistic information provided by on-line ESI-MS(/MS) is in accordance with Sandmeyer's proposal, and was made possible by coupling a microreactor on-line to the ESI ion source, which allowed reactions to be screened from 0.7-2.0 s, identifying and characterizing all intermediates that were formed and consumed during the reaction.     

电喷雾萃取电离质谱快速测定牙膏胶体中的二甘醇

将自行研制的电喷雾萃取电离源(EESI)和LTQ XL质谱仪耦合, 建立了选择性离子化快速测定牙膏胶状纳米级复杂基质样品中微量二甘醇的EESI-MS方法. 实验结果表明, 二甘醇与NH4+, Na+和K+离子在一级质谱中形成特征非共价配合物, 其它大量组分如纳米粒子及胶质等对测定无干扰. 该方法的样品消耗量约0.1 g, 灵敏度高, 单个样品的分析时间不到2 min, 可用于牙膏胶体中低含量二甘醇的选择性快速测定.     

Chelation-controlled radical chain reactions studied by electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry (ESI-MS) is a novel tool for the investigation of chemical reactions in solution and for the direct detection and identification of reactive intermediates. The tributyltin hydride mediated addition of tert-butyl iodide to dimethyl 2-cyclohexyl-4-methyleneglutarate (2) in the presence of Lewis acids was investigated by ESI-MS using a microreactor coupled on-line to an ESI mass spectrometer. For the first time we have been able to show that transient radicals in radical chain reactions can be detected unambiguously under steady-state conditions in the reaction solution and can be characterized by ESI-MS/MS and accurate mass determination. The detection of different heterodimer radical complexes by ESI-MS/MS has provided new insights into the mechanism of Lewis acid controlled radical chain reactions. Dimeric chelate complexes of glutarates, such as 2 and 3, and Lewis acids, like Sc(OTf)3, MgBr2OEt2 and LiClO4, were observed as well as higher aggregates with additional equivalents of Lewis acid. Evidence for a dynamic equilibrium of the complexes in solution was found by NMR spectroscopy. The ESI-MS investigation of the chelation of glutarate 2 with various Lewis acids has led to the conclusion that the tendency for Lewis acids to form dimeric chelate complexes and higher aggregates has an important effect on the stereoselective outcome of the radical reactions.     

The use of thermal desorption GC/MS to study weight loss in thermogravimetric analysis of di-acid salts

Thermal desorption gas chromatograph mass spectrometry (TD GC/MS) was used to study weight loss in thermogravimetric analysis (TGA). The technique of thermal desorption utilizes the same temperature heating rate as the TGA to thermally desorb volatiles from solid sample matrices. Volatiles were cryo-trapped at −60 °C. After thermal desorption is complete, the trapped volatiles are separated by a GC capillary column and identified by mass spectrometry. In this study, the TD GC/MS was applied in pharmaceutical development to understand the chemical reactions attributed to the weight loss in the thermal decomposition of two dicarboxylic acid salts of a drug substance. These two salts exhibited different thermal stabilities. The thermally induced chemical reactions obtained from these two salts included dehydration and decarboxylation. Thermal degradation compounds were identified and reaction pathways for decomposition were proposed. The stability of the salts is dependent on the identity of the dicarboxylic acids from which they were generated. The information obtained from TD GC/MS helps better understand the weight loss process in thermogravimetric analysis.     

An overview of the retro-Diels-Alder reaction in semiunsaturated heterocyclic rings: mass spectra of new substituted 1,4,5,6,7,8-hexahydroquinolines and their oxo-analogues 5,6,7,8-tetrahydro-4H-chromenes

Electron impact ionization (EI), chemical ionization (CI), electrospray ionization (ESI) and tandem mass spectrometry (MS/MS) were used to investigate a number of relatively large and structurally related new heterocycles such as substituted 1,4,5,6,7,8-hexahydroquinolines and their oxa-analogues 5,6,7,8-tetrahydro-4H-chromenes. In the EI spectra the hexahydroquinolines undergo the loss of the substituent attached at the C4 position, while the 4H-chromenes undergo a retro-Diels-Alder reaction (RDA) after elimination of the C4 substituent. Under chemical ionization conditions the RDA reaction is observed only for the 4H-chromenes. The ESI-MS/MS spectra reveal results similar to the EI and CI spectra, since the 4H-chromenes undergo RDA reactions while the hexahydroquinolines form a very stable even-electron pyridium ion derived from the loss of the C4 substituent.     

Structure elucidation of highly polar basic degradants by on-line hydrogen/deuterium exchange hydrophilic interaction chromatography coupled to tandem mass spectrometry

A hydrophilic interaction liquid chromatography (HILIC) method was used to separate a commonly used pharmaceutical starting material, 4-aminomethylpyridine (4-AMP), and its degradants. The structures of the major degradants were characterized and elucidated without prior isolation by accurate mass measurement, MS/MS analysis and on-line hydrogen/deuterium (H/D) exchange experiments. The mass spectra obtained from H/D exchange experiments are particularly useful to differentiate structural isomers, to elucidate the fragmentation pathways, and to aid in structure elucidation in the absence of MS/MS fragmentation information. The impact of deuterium oxide and temperature on HILIC separation has also been explored here. The integration of H/D exchange with HILIC has been described here for the first time and has been demonstrated to be a powerful structure elucidation tool via the study of degradants in 4-AMP.     

On-Line SPE on Restricted Access Adsorbent for HPLC-MS/MS Analysis of Felodipine in Plasma Samples

Direct plasma loading on a LiChrospher ADS C18 cartridge on-line coupled to an analytical Zorbax XDB C18 column was used to analyze felodipine by means of positive atmospheric pressure chemical ionization (APCI) tandem mass spectrometric (MS/MS) detection. Appropriate sensitivity, accuracy, and precision were obtained using an ion trap mass analyzer operated in a multiple reaction monitoring (MRM) mode. Diethyl-4-(2,3-dichlorophenyl)-2,6-dimethyl-1,4-dihydropyridine-3,5-dicarboxylate) was used as an internal standard. The method was fully validated. The method was successfully applied to a pilot bioequivalence study made on extended release oral dosage forms containing 10 mg of felodipine, under fed and fasting conditions.     

Real time monitoring of accelerated chemical reactions by ultrasonication‐assisted spray ionization mass spectrometry

Ultrasonication has been used to accelerate chemical reactions. It would be ideal if ultrasonication‐assisted chemical reactions could be monitored by suitable detection tools such as mass spectrometry in real time. It would be helpful to clarify reaction intermediates/products and to have a better understanding of reaction mechanism. In this work, we developed a system for ultrasonication‐assisted spray ionization mass spectrometry (UASI–MS) with an ~1.7 MHz ultrasonic transducer to monitor chemical reactions in real time. We demonstrated that simply depositing a sample solution on the MHz‐based ultrasonic transducer, which was placed in front of the orifice of a mass spectrometer, the analyte signals can be readily detected by the mass spectrometer. Singly and multiply charged ions from small and large molecules, respectively, can be observed in the UASI mass spectra. Furthermore, the ultrasonic transducer used in the UASI setup accelerates the chemical reactions while being monitored via UASI–MS. The feasibility of using this approach for real‐time acceleration/monitoring of chemical reactions was demonstrated. The reactions of Girard T reagent and hydroxylamine with steroids were used as the model reactions. Upon the deposition of reactant solutions on the ultrasonic transducer, the intermediate/product ions are readily generated and instantaneously monitored using MS within 1 s. Additionally, we also showed the possibility of using this reactive UASI–MS approach to assist the confirmation of trace steroids from complex urine samples by monitoring the generation of the product ions. Copyright © 2014 John Wiley & Sons, Ltd.     

The application of gas chromatography/atmospheric pressure chemical ionisation time‐of‐flight mass spectrometry to impurity identification in Pharmaceutical Development

Accurate mass measurement (used to determine elemental formulae) is an essential tool for impurity identification in pharmaceutical development for process understanding. Accurate mass liquid chromatography/mass spectrometry (LC/MS) is used widely for these types of analyses; however, there are still many occasions when gas chromatography (GC)/MS is the appropriate technique. Therefore, the provision of robust technology to provide accurate mass GC/MS (and GC/MS/MS) for this type of activity is essential. In this report we describe the optimisation and application of a newly available atmospheric pressure chemical ionisation (APCI) interface to couple GC to time‐of‐flight (TOF) MS. To fully test the potential of the new interface the APCI source conditions were optimised, using a number of standard compounds, with a variety of structures, as used in synthesis at AstraZeneca. These compounds were subsequently analysed by GC/APCI‐TOF MS. This study was carried out to evaluate the range of compounds that are amenable to analysis using this technique. The range of compounds that can be detected and characterised using the technique was found to be extremely broad and include apolar hydrocarbons such as toluene. Both protonated molecules ([M + H]⁺) and radical cations (M^+.) were observed in the mass spectra produced by APCI, along with additional ion signals such as [M + H + O]⁺. The technique has been successfully applied to the identification of impurities in reaction mixtures from organic synthesis in process development. A typical mass accuracy of 1–2 mm/zunits (m/z 80–500) was achieved allowing the reaction impurities to be identified based on their elemental formulae. These results clearly demonstrate the potential of the technique as a tool for problem solving and process understanding in pharmaceutical development. The reaction mixtures were also analysed by GC/electron ionisation (EI)‐MS and GC/chemical ionisation (CI)‐MS to understand the capability of GC/APCI‐MS relative to these two firmly established techniques. Copyright © 2010 John Wiley & Sons, Ltd.     

Real-time reaction monitoring using ion mobility-mass spectrometry

The potential of ion mobility (IM) spectrometry in combination with mass spectrometry (MS) for real-time reaction monitoring is reported. The combined IM-MS approach using electrospray ionization affords gas-phase analyte characterization based on both mass-to-charge (m/z) ratio and gas-phase ion mobility (drift time). The use of IM-MS analysis is demonstrated for the monitoring of the reaction products formed when 7-fluoro-6-hydroxy-2-methylindole is deprotonated by aqueous sodium hydroxide. Real-time reaction monitoring was carried out over a period of several hours, with the reaction mixture sampled and analysed at intervals of several minutes. Product ion relative intensity is enhanced selectively in the ion mobility-selected mass spectrum, compared to mass spectrometry alone. The combined IM-MS approach has potential as a rapid and selective technique to aid pharmaceutical process control and for the elucidation of reaction mechanism.     

质谱实时监测有机化学反应的研究进展

质谱法是一种能够提供物质丰富结构信息的谱学方法,广泛应用于有机物的测定、有机化学反应的监测以及有机化学反应机理的研究中。本文综述了质谱实时监测缩合反应、取代反应、氧化反应、环化反应、加成反应、偶联反应、自由基反应等有机化学反应的研究进展。     

Tandem mass spectrometric analysis of a complex triterpene saponin mixture of Chenopodium quinoa

A nano-HPLC electrospray ionization multi-stage tandem mass spectrometry (nLC-ESI-MS/MS) approach was applied to a complex crude triterpene saponin extract of Chenopodium quinoa seed coats. In ESI-MS/MS spectra of triterpene saponins, characteristic fragmentation reactions are observed and allow the determination of aglycones, saccharide sequences, compositions, and branching. Fragmentation of aglycones provided further structural information. The chemical complexity of the mixture was resolved by a complete profiling. Eighty-seven triterpene saponins comprising 19 reported and 68 novel components were identified and studied by MS. In addition to four reported, five novel triterpene aglycones were detected and characterized according to their fragmentation reactions in ESI-MS/MS and electron ionization mass spectrometry (EI-MS). As a novelty fragmentation pathways were proposed and analyzed based upon quantum chemical calculations using a hybrid Hartree-Fock density functional method. Accuracy of the assignment procedure was proven by isolation and structure determination of a novel compound. As the relative distribution and composition of saponins varies between different cultivars and soils, the presented strategy allows a rapid and complete analysis of Chenopodium quinoa saponin distribution and composition, and is particularly suitable for quality control and screening of extracts designated for pharmaceutical, agricultural, and industrial applications.     

The use of selective adsorbents in capillary electrophoresis-mass spectrometry for analyte preconcentration and microreactions: a powerful three-dimensional tool for multiple chemical and biological applications.

Much attention has recently been directed to the development and application of online sample preconcentration and microreactions in capillary electrophoresis using selective adsorbents based on chemical or biological specificity. The basic principle involves two interacting chemical or biological systems with high selectivity and affinity for each other. These molecular interactions in nature usually involve noncovalent and reversible chemical processes. Properly bound to a solid support, an "affinity ligand" can selectively adsorb a "target analyte" found in a simple or complex mixture at a wide range of concentrations. As a result, the isolated analyte is enriched and highly purified. When this affinity technique, allowing noncovalent chemical interactions and biochemical reactions to occur, is coupled on-line to high-resolution capillary electrophoresis and mass spectrometry, a powerful tool of chemical and biological information is created. This paper describes the concept of biological recognition and affinity interaction on-line with high-resolution separation, the fabrication of an "analyte concentrator-microreactor", optimization conditions of adsorption and desorption, the coupling to mass spectrometry, and various applications of clinical and pharmaceutical interest.     

On-line capillary electrophoresis-electrospray mass spectrometry for the stereoselective analysis of drugs and metabolites

The on-line combination of partial-filling capillary electrophoresis and electrospray ionization mass spectrometry was demonstrated for the enantioseparation of pharmaceutical drugs and metabolites, namely amphetamines, methadone, venlafaxine and selected tropane alkaloids. The partial-filling technique proved to be a suitable and efficient approach to avoid mass spectrometry (MS) source contamination, as well as signal suppression due to nonvolatile additives. To achieve chiral separation, various chiral selectors were applied, including neutral and particularly negatively charged cyclodextrins. Because of the countercurrent contribution, charged cyclodextrins were found more suitable for the on-line MS detection of separated enantiomers. Hyphenation of capillary electrophoresis (CE) with mass spectrometry was found appropriate for the stereoselective analysis of methadone in real serum samples. Moreover, the use of MS in the selected ion monitoring mode resulted in a very high selectivity, as well as improved sensitivity compared to UV detection. Finally, with atropine as a model compound, the quantitative performances of the method were evaluated and showed high sensitivity, as well as good repeatability in terms of migration time and peak area ratio.     

Flow injection analysis coupled with HPLC and CE for monitoring chemical production processes

Summary In chemical and pharmaceutical production plants process control is often performed by plant personal near the process (at-line). Alternatively, spectroscopic procedures like near infrared may be coupled to the process using in-line or on-line interfaces. When the analytical problem cannot be solved by these established approaches chromatographic techniques can be directly coupled to the production process. An application of chemical reaction monitoring which is difficult to perform is reported. The analytical problems are solved by HPLC and CE. Both techniques in the application presented need an on-line derivatization step prior to the analysis. Flow Injection Analysis (FIA) was applied for this sample preparation step. For the online coupling to the commercially available CE-instrument a special sample vial was developed. The application shows sufficient reproducibility and analysis speed for near real-time monitoring. of the process. Dedicated to Professor Dr. Heinz Engelhardt on the occasion of his 65^th birthday.     

On-Line Sample Treatment LC System for MS Compatibility

In the present work, a new liquid chromatography–mass spectrometry (LC–MS) system with on-line pretreatment using column switching and a dilution function was developed. This system can be used under conventional high-performance liquid chromatography (LC) separation conditions, including mobile phases containing phosphate buffer. The built-in autodilution function greatly improves the trapping efficiency for target compounds, followed by desaltation that optimizes the ionization conditions for MS analysis. This fully automated two-dimensional LC system interfaced with mass spectrometry provided a powerful tool for the determination of impurity profiles in pharmaceutical research and the identification of traditional Chinese medicine in natural products.     

Ultrasonication-assisted spray ionization mass spectrometry for on-line monitoring of organic reactions

A straightforward on-line monitoring of organic reactions by ultrasonication-assisted spray ionization mass spectrometry (UASI MS) is demonstrated in this work.