An optical biosensor for dichlovos using stacked sol-gel films containing acetylcholinesterase and a lipophilic chromoionophore

An optical biosensor consisting of a chromoionophore (ETH5294) (CM) doped sol-gel film interfaced with another sol-gel film immobilized with acetylcholinesterase (AChE) was employed to detect the insecticide dichlorvos. The main advantage of this optical biosensor is the use of a sol-gel layer with immobilized CM that possesses lipophilic property. The highly lipophilic nature of the CM and its compatibility with the sol-gel matrix has prevented leaching, which is frequently a problem in optical sensor construction based on pH indicator dyes. The immobilization of the indicator and enzyme was simple and need no chemical modification. The CM layer is pH sensitive and detects the pH changes of the acetylcholine chloride (AChCl) substrate when hydrolyzed by AChE layer deposited above. In the absence of the AChE layer, the pH response of the CM layer is linear from pH 6 to 8 (R² = 0.98, n = 3) and it showed no leaching of the lipophilic chromoionophore. When the AChE layer is deposited on top, the optical biosensor responds to AChCl with a linear dynamic range of 40-90 mM AChCl (R² = 0.984, n = 6). The response time of the biosensor is 12 min. Based on the optimum incubation time of 15 min, a linear calibration curve of dichlorvos against the percentage inhibition of AChE was obtained from 0.5 to 7 mg/L of dichlorvos (17-85% inhibition, R² = 0.991, n = 9). The detection limit for dichlorvos was 0.5 mg/L. The results of the analysis of 1.7-6.0 mg/L of dichlorvos using this optical biosensor agreed well with a gas chromatography-mass spectrometry detection method.     

A chitosan–polypyrrole magnetic nanocomposite as μ-sorbent for isolation of naproxen

An extracting medium based on chitosan–polypyrrole (CS–PPy) magnetic nanocomposite was synthesized by chemical polymerization of pyrrole at the presence of chitosan magnetic nanoparticles (CS-MNPs) for micro-solid phase extraction. In this work, magnetic nanoparticles, the modified CS-MNPs and different types of CS–PPy magnetic nanocomposites were synthesized. Extraction efficiency of the CS–PPy magnetic nanocomposite was compared with the CS-MNPs and Fe₃O₄ nanoparticles for the determination of naproxen in aqueous samples, via quantification by spectrofluorimetry. The scanning electron microscopy images obtained from all the prepared nanocomposites revealed that the CS–PPy magnetic nanocomposite possess more porous structure. Among different synthesized magnetic nanocomposites, CS–PPy magnetic nanocomposite showed a prominent efficiency. Influencing parameters on the morphology of CS–PPy magnetic nanocomposite such as weight ratio of components was also assayed. In addition, effects of different parameters influencing the extraction efficiency of naproxen including desorption solvent, desorption time, amount of sorbent, ionic strength, sample pH and extraction time were investigated and optimized. Under the optimum condition, a linear calibration curve in the range of 0.04–10 μg mL⁻¹ (R² = 0.9996) was obtained. The limits of detection (3S_b) and limits of quantification (10S_b) of the method were 0.015 and 0.04 μg mL⁻¹ (n = 3), respectively. The relative standard deviation for water sample spiked with 0.1 μg mL⁻¹ of naproxen was 3% (n = 5) and the absolute recovery was 92%. The applicability of method was extended to the determination of naproxen in tap water, human urine and plasma samples. The relative recovery percentages for these samples were in the range of 56–99%.     

Sensitive monitoring of monoterpene metabolites in human urine using two-step derivatisation and positive chemical ionisation-tandem mass spectrometry

A gas chromatographic–positive chemical ionisation-tandem mass spectrometric (GC–PCI-MS/MS) method for the simultaneous determination of 10 oxidative metabolites of the monoterpenoid hydrocarbons α-pinene, (R)-limonene, and Δ³-carene ((+)-3-carene) in human urine was developed and tested for the monoterpene biomonitoring of the general population (n = 36). The method involves enzymatic cleavage of the glucuronides followed by solid-supported liquid–liquid extraction and derivatisation using a two-step reaction with N,O-bis(trimethylsilyl)-trifluoroacetamide and N-(trimethylsilyl)imidazole. The method proved to be both sensitive and reliable with detection limits ranging from 0.1 to 0.3 μg L⁻¹. In contrast to the frequent and distinct quantities of (1S,2S,4R)-limonene-1,2-diol, the (1R,2R,4R)-stereoisomer could not be detected. The expected metabolite of (+)-3-carene, 3-caren-10-ol was not detected in any of the samples. All other metabolites were detected in almost all urine samples.     

Rapid monitoring of grapevine reserves using ATR–FT-IR and chemometrics

Predictions of grapevine yield and the management of sugar accumulation and secondary metabolite production during berry ripening may be improved by monitoring nitrogen and starch reserves in the perennial parts of the vine. The standard method for determining nitrogen concentration in plant tissue is by combustion analysis, while enzymatic hydrolysis followed by glucose quantification is commonly used for starch. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR–FT-IR) combined with chemometric modelling offers a rapid means for the determination of a range of analytes in powdered or ground samples. ATR–FT-IR offers significant advantages over combustion or enzymatic analysis of samples due to the simplicity of instrument operation, reproducibility and speed of data collection. In the present investigation, 1880 root and wood samples were collected from Shiraz, Semillon and Riesling vineyards in Australia and Germany. Nitrogen and starch concentrations were determined using standard analytical methods, and ATR–FT-IR spectra collected for each sample using a Bruker Alpha instrument. Samples were randomly assigned to either calibration or test data sets representing two thirds and one third of the samples respectively. Signal preprocessing included extended multiplicative scatter correction for water and carbon dioxide vapour, standard normal variate scaling with second derivative and variable selection prior to regression. Excellent predictive models for percent dry weight (DW) of nitrogen (range: 0.10–2.65% DW, median: 0.45% DW) and starch (range: 0.25–42.82% DW, median: 7.77% DW) using partial least squares (PLS) or support vector machine (SVM) analysis for linear and nonlinear regression respectively, were constructed and cross validated with low root mean square errors of prediction (RMSEP). Calibrations employing SVM-regression provided the optimum predictive models for nitrogen (R² = 0.98 and RMSEP = 0.07% DW) compared to PLS regression (R² = 0.97 and RMSEP = 0.08% DW). The best predictive models for starch was obtained using PLS regression (R² = 0.95 and RSMEP = 1.43% DW) compared to SVR (R² = 0.95; RMSEP = 1.56% DW). The RMSEP for both nitrogen and starch is below the reported seasonal flux for these analytes in Vitis vinifera. Nitrogen and starch concentrations in grapevine tissues can thus be accurately determined using ATR–FT-IR, providing a rapid method for monitoring vine reserve status under commercial grape production.     

Modification of polypyrrole nanowires array with platinum nanoparticles and glucose oxidase for fabrication of a novel glucose biosensor

A novel glucose biosensor, based on the modification of well-aligned polypyrrole nanowires array (PPyNWA) with Pt nanoparticles (PtNPs) and subsequent surface adsorption of glucose oxidase (GOx), is described. The distinct differences in the electrochemical properties of PPyNWA–GOx, PPyNWA–PtNPs, and PPyNWA–PtNPs–GOx electrodes were revealed by cyclic voltammetry. In particular, the results obtained for PPyNWA–PtNPs–GOx biosensor showed evidence of direct electron transfer due mainly to modification with PtNPs. Optimum fabrication of the PPyNWA–PtNPs–GOx biosensor for both potentiometric and amperometric detection of glucose were achieved with 0.2 M pyrrole, applied current density of 0.1 mA cm⁻², polymerization time of 600 s, cyclic deposition of PtNPs from −200 mV to 200 mV, scan rate of 50 mV s⁻¹, and 20 cycles. A sensitivity of 40.5 mV/decade and a linear range of 10 μM to 1000 μM (R² = 0.9936) were achieved for potentiometric detection, while for amperometric detection a sensitivity of 34.7 μA cm⁻² mM⁻¹ at an applied potential of 700 mV and a linear range of 0.1–9 mM (R² = 0.9977) were achieved. In terms of achievable detection limit, potentiometric detection achieved 5.6 μM of glucose, while amperometric detection achieved 27.7 μM.     

A novel magnetic poly(aniline-naphthylamine)-based nanocomposite for micro solid phase extraction of rhodamine B

A novel Fe₃O₄–poly(aniline-naphthylamine)-based nanocomposite was synthesized by chemical oxidative polymerization process as a magnetic sorbent for micro solid phase extraction. The scanning electron microscopy images of the synthesized nanocomposite revealed that the copolymer posses a porous structure with diameters less than 50 nm. The extraction efficiency of this sorbent was examined by isolation of rhodamine B, a mutagenic and carcinogenic dye, from aquatic media in dispersion mode. Among different synthesized polymers, Fe₃O₄/poly(aniline-naphthylamine) nanocomposite showed a prominent efficiency. Parameters including the desorption solvent, amount of sorbent, desorption time, sample pH, ionic strength, extraction time and stirring rate were optimized. Under the optimum condition, a linear spiked calibration curve in the range of 0.35–5.00 μg L⁻¹ with R² = 0.9991 was obtained. The limits of detection (3S_b) and limits of quantification (10S_b) of the method were 0.10 μg L⁻¹ and 0.35 μg L⁻¹ (n = 3), respectively. The relative standard deviation for water sample with 0.5 μg L⁻¹ of RhB was 4.2% (n = 5) and the absolute recovery was 92%. The method was applied for the determination of rhodamine B in dishwashing foam, dishwashing liquid, shampoo, pencil, matches tips and eye shadows samples and the relative recovery percentage were in the range of 94–99%.     

Burning velocity measurement of HFC-41, HFC-152, and HFC-161 by the spherical-vessel method

The burning velocities of fluoromethane (HFC-41), 1,2-difluoroethane (HFC-152), fluoroethane (HFC-161) and ethane were measured by the spherical-vessel (SV) method at room temperature and at initial pressures of 80-107 kPa over a wide range of HFC/air equivalence ratios (?). The burning velocities were determined from the measured pressure increases by application of a spherical flame model. Schlieren photography was used to directly observe flame propagation behavior in a cylindrical vessel equipped with optical windows. The time evolution of the flame radii derived from the pressure increases agreed with the time evolution observed with the Schlieren technique. The maximum burning velocities of HFC-41, HFC-152, HFC-161 and ethane were 28.3 cm s⁻¹ at ? = 1.01, 30.1 cm s⁻¹ at ? = 1.07, 38.3 cm s⁻¹ at ? = 1.07 and 40.9 cm s⁻¹ at ? = 1.05, respectively. The maximum burning velocities for the HFCs, including previously reported C₁ and C₂ fluoroalkanes, decreased with increasing F-substitution rate (the ratio of the number of F atoms to the sum of the number of H and F atoms). The concentrations of chemical species in the flames were investigated by means of an equilibrium calculation, and the results suggested that the burning velocity was correlated with the concentrations of H and OH radicals that were not deactivated by F radicals in the flame. The results also suggested that the burning velocities were linearly related to the heats of combustion of the C₁ and C₂ fluoroalkanes.     

Copper(II) complexes with 2-[(2-pyridin-2-yl-ethylimino)-methyl]-phenol and its substituted derivatives: Syntheses,physical properties and structures

Five new complexes of copper(II) having the general formula [CuL(OAc)], where HL and OAc⁻ represent the N,N,O-donor 4-R-2-[(2-pyridin-2-yl-ethylimino)-methyl]-phenol (R = H, Br, NO₂ and OMe) or 5-methoxy-2-[(2-pyridin-2-yl-ethylimino)-methyl]-phenol and acetate, respectively have been reported. The complexes have been synthesized in 52–80% yields by reacting one mole equivalent each of Cu(OAc)₂·H₂O, 2-(2-aminoethyl)pyridine and the appropriate substituted salicylaldehyde in methanol. The solid state effective magnetic moments of the complexes at 298 K are within 1.79–1.97 μ_B. In solution, all the complexes are electrically non-conducting. The electronic spectra of these species display a weak ligand-field band within 640–615 nm and several strong charge transfer bands in the range 410–235 nm. The complexes are EPR active. The frozen (120 K) solution spectral parameters are g_|| = 2.22–2.23, A_|| = 189–191 × 10⁻⁴ cm⁻¹, _g⊥$g_{\perp }$ = 2.06–2.07, and _A⊥(N₎$A_{\perp (\text{N})}$ = 10–16 × 10⁻⁴ cm⁻¹. X-ray structures show that the ligand L⁻ coordinates the metal center through the phenolate-O, the imine-N and the pyridine-N and forms two six-membered chelate rings. The acetate is bidentate but asymmetric with respect to the Cu–O as well as C–O bond lengths. Only the complex where R = Br dimerises due to two reciprocal Cu?Br interactions.     

Direct determination of free bilirubin in serum at sub-nanomolar levels

Direct analysis of free bilirubin in human and animal blood serum samples is reported for the first time. A state-of-the-art system comprised of newly developed high-performance liquid chromatography (HPLC) on reverse-phase (RP) C18 support coupled with thermal lens spectrometric detection (TLS), based on excitation at λ = 457.9 nm by an argon laser was used for this purpose. This HPLC-TLS method enabled a baseline separation of all three structural isomers of bilirubin (XIII-α, IX-α and III-α) and the respective degradation products in isocratic mode in fewer than 7 min. The method excels in ultra-high sensitivity with limit of detection (LOD) and limit of quantitation (LOQ) of 90 pM and 250 pM, respectively. Moreover, this method also affords high precision and accuracy, with correlation coefficients R² > 0.997 over a broad linear range (0.250–150 nM) and R² = 0.9998 in a concentration range of clinical interest (0.500–25 nM). The method's boosted sensitivity enabled to streamline sample preparation to just one serum ultrafiltration step, which made qualitative evaluation of sample preparation possible for the first time. The performance of the HPLC-TLS method was assessed to have 20-fold enhanced sensitivity when compared to a comparable method incorporating HPLC coupled with diode array detector (DAD), which is also a novel method by itself, and could be applied for free bilirubin determination in patients with elevated bilirubin levels.     

The iron potassium diarsenate KFeAs2O7 structural, electric and magnetic behaviors

Crystals of a new potassium iron (III) diarsenate (KFeAs₂O₇) have been grown and characterized by single crystal X-ray diffraction. It crystallizes in the triclinic space group , with a=7.662(1) Å, b=8.402(2) Å, c=10.100(3) Å, α=90.42(3)°, β=89.74(2)°, γ=106.39(2)°, V=623.8(3) Å³ and Z=4. The final agreement factors are R=0.0342, wR=0.0889, S(F²)=1.01; the structural model is validated by bond valence sum (BVS) and charge distribution (CD) methods. The structure consists of corner-sharing FeO₆ octahedra and As₂O₇ diarsenate groups, the three-dimensional framework delimits tunnels running along [0 1 0] direction where the potassium ions reside. The crystal structure of the title compound is different from that of the monoclinic KAlP₂O₇ type but structural relationships exist between the frameworks. Impedance measurements (frequency/temperature ranges: 5-13,000 Hz/526-668 K) show KFeAs₂O₇ an ionic conductor being the conductivity 2.76×10⁻⁷ S cm⁻¹ at 568 K and E_a is 0.47 eV. The BVS model suggests that the most probable potassium conduction pathway is along b-direction. Magnetic measurements reveal the Curie—Weiss type paramagnetic behavior over the range 30-300 K and ferromagnetic below 29.3 K.     

Direct quantification of creatinine in human urine by using isotope dilution extractive electrospray ionization tandem mass spectrometry

Urinary creatinine (CRE) is an important biomarker of renal function. Fast and accurate quantification of CRE in human urine is required by clinical research. By using isotope dilution extractive electrospray ionization tandem mass spectrometry (EESI–MS/MS) a high throughput method for direct and accurate quantification of urinary CRE was developed in this study. Under optimized conditions, the method detection limit was lower than 50 μg L⁻¹. Over the concentration range investigated (0.05–10 mg L⁻¹), the calibration curve was obtained with satisfactory linearity (R² = 0.9861), and the relative standard deviation (RSD) values for CRE and isotope-labeled CRE (CRE-d3) were 7.1–11.8% (n = 6) and 4.1–11.3% (n = 6), respectively. The isotope dilution EESI–MS/MS method was validated by analyzing six human urine samples, and the results were comparable with the conventional spectrophotometric method (based on the Jaffe reaction). Recoveries for individual urine samples were 85–111% and less than 0.3 min was taken for each measurement, indicating that the present isotope dilution EESI–MS/MS method is a promising strategy for the fast and accurate quantification of urinary CRE in clinical laboratories.     

Engineering properties of a camelid antibody affinity sorbent for Immunoglobulin G purification

An IgG-specific camelid antibody matrix (BAC, Naarden, The Netherlands), developed from an immune phage display library, was characterized regarding engineering properties including mass transfer characteristics. Uptake kinetics and equilibrium binding capacity were determined by a finite bath method. Adsorption kinetic parameters were also determined using a real time biosensor. Slightly different properties to conventional Staphylococcal protein A affinity media were shown; especially a 2–2.5 times lower maximal binding capacity with a value of 26 mg/ml polyclonal IgG was obtained. Mass transfer could be described by using a film and pore diffusion model (D_e = 5 × 10⁻⁸ cm²/s). Determined engineering parameters were used to predict breakthrough behaviour in column mode considering film and pore resistances. The dynamic binding capacity at 10% breakthrough did not change when residence time was at least 6 min.     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

Resistivity–viscosity relationship in liquid–liquid critical mixtures with added ions

Precise resistivity ρ (Ω cm) and viscosity η (10⁻² P) measurements for isobutyric acid–water (IBAW) critical mixtures with added K⁺ and Cl⁻ ions have been performed in the Arrhenius temperature domain of the electrolyte. From the activation energy, the resistivity–viscosity relation reveals a fraction power character over the whole range of parameters investigated. To analyze our data we have used an exponential formula derived from the equivalent Arrhenius law: ρ/T is proportional to (η/T)^R, where R = E_ρ/E_η is the ratio between the resistivity and viscosity activation energies. In the case of the pure system (IBAW), the value of R is in vicinity of 1, but when the salt is added, the ratio R shows dependence on the (K⁺, Cl⁻) concentrations: 0.6 < R < 1. The domain of the validity of R is in conformity with the theoretical prediction. The Coulombic interaction is the origin of the deviation.     

Transition-metal complexes of phenoxy-imine ligands modified with pendant imidazolium salts: Synthesis, characterisation and testing as ethylene polymerisation catalysts

Reaction between 3-((1R,2R)-2-{[1-(3,5-di-tert-butyl-2-hydroxy-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1a) or the derivative 3-((1R,2R)-2-{[1-(2-hydroxy-5-nitro-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1b) and metal halides MCl_x.yTHF (M = Zr, x = 4, y = 2; M = V, x = y = 3; M = Cr, x = y = 3), in THF, at −78 °C gives the metal complexes of general formula [MCl_x(κ²-N,O-OC₆H₂R¹R²C(H)N-C₆H₁₀-Im)₂][Br]₂ (where M = Zr, x = 2, R¹ = R² = ^tBu, 2; M = Zr, x = 2, R¹ = H, R² = NO₂, 3; M = V, x = 1, R¹ = R² = ^tBu, 4; M = Cr, x = 1, R¹ = R² = ^tBu, 5; M = Fe, x = 0, R¹ = R² = ^tBu, 6; Im = 1-isopropyl-4-phenyl-3H-imidazol-1-ium-3-yl). ¹H and ¹³C NMR spectroscopy of 2 and 3 indicate κ²-N,O-ligand coordination via the phenoxy-imine moiety with pendant imidazolium salt that is corroborated by a single crystal structure of 6. Compounds 2, 3, 4 and 5 were tested as precatalysts for ethylene polymerisation in the presence of methylaluminoxane (MAO) cocatalyst, showing low activity. Selected polymer samples were characterised by GPC showing multimodal molecular weight distributions.     

A visual detection of protein content based on titration of moving reaction boundary electrophoresis

A visual electrophoretic titration method was firstly developed from the concept of moving reaction boundary (MRB) for protein content analysis. In the developed method, when the voltage was applied, the hydroxide ions in the cathodic vessel moved towards the anode, and neutralized the carboxyl groups of protein immobilized via highly cross-linked polyacrylamide gel (PAG), generating a MRB between the alkali and the immobilized protein. The boundary moving velocity (V_MRB) was as a function of protein content, and an acid–base indicator was used to denote the boundary displacement. As a proof of concept, standard model proteins and biological samples were chosen for the experiments to study the feasibility of the developed method. The experiments revealed that good linear calibration functions between V_MRB and protein content (correlation coefficients R > 0.98). The experiments further demonstrated the following merits of developed method: (1) weak influence of non-protein nitrogen additives (e.g., melamine) adulterated in protein samples, (2) good agreement with the classic Kjeldahl method (R = 0.9945), (3) fast measuring speed in total protein analysis of large samples from the same source, and (4) low limit of detection (0.02–0.15 mg mL⁻¹ for protein content), good precision (R.S.D. of intra-day less than 1.7% and inter-day less than 2.7%), and high recoveries (105–107%).