Fine pore mouth structure of molecular sieve carbon with GCMC-assisted supercritical gas adsorption analysis

N₂ adsorption isotherms of molecular sieve carbon were measured at 77 K and 303 K. The Ar adsorption isotherms of molecular sieve carbon samples were also measured at 303 K. The grand canonical Monte Carlo (GCMC) simulation technique was applied to calculate the N₂ and Ar adsorption isotherms at 303 K using the ultramicropore volume determined by H₂O adsorption. The comparative method of experimental and simulated isotherms of supercritical N₂ and Ar at 303 K gave the width of the micropore mouth of the molecular sieve carbon, which can be applied to the ultramicropore width determination for other noncrystalline porous solids.     

Chemical synthesis of oriented ferromagnetic LaSr-2 × 4 manganese oxide molecular sieve nanowires

We report a chemical solution based method using nanoporous track-etched polymer templates for producing long and oriented LaSr-2 × 4 manganese oxide molecular sieve nanowires. Scanning transmission electron microscopy and electron energy loss spectroscopy analyses show that the nanowires are ferromagnetic at room temperature, single crystalline, epitaxially grown and self-aligned.     

Preparation and characterization of N–Ti-MCM-22 mesoporous molecular sieve and investigation of its photocatalytic properties

Nanocrystalline N-doped and Ti-containing MCM-22 catalyst was synthesized by the static hydrothermal method, using sodium azide as nitrogen source for doping, and tetra-n-butyl titanate [Ti(OC₄H₉)₄] as precursor for TiO₂. The catalysts were characterized by X-ray diffraction, transmission electron microscopy, and energy-dispersive spectroscopy. The results showed that a mesoporous region with ca. 3-nm pore size was created by expansion between lamellar crystalline sheets in Ti-MCM-22. Nitrogen was substituted for some of the lattice oxygen atoms. During liquid phase photocatalytic degradation of methylene blue under high-pressure Hg arc lamp irradiation, the as-prepared N-doped Ti-MCM-22 exhibited much higher activity than the undoped Ti-MCM-22, attributed to the effect of the nitrogen dopant. The effects of N-doping amount, catalyst concentration, initial solution pH, and initial concentration of MB on the photocatalytic activity were investigated.     

Observations of carbon–carbon coupling of 4,4'-dibromo-p-terphenyl on Cu(110) surface at molecular level

The carbon–carbon couplings of 4,4'-dibromo-p-terphenyl(DBTP) on Cu(110) surface have been investigated at a single molecular level by scanning tunneling microscopy. After annealing at 353 K, a mixture of parallel non-organometallic and organometallic intermediates of DBTP molecules along the[1–10] direction of the surface has been observed. Further annealing at 393 K causes one group of molecules to form oligomers with para-para and para-meta motifs via Ullmann reaction and the other group of molecules to synthesize oligomers with meta-meta motifs via direct carbon–carbon coupling reaction. Statistical results directly reveal that the occurrence of reaction type is strongly related to the initial binding configuration of DBTP molecules.     

Covalent modification of multiwalled carbon nanotubes with a low molecular weight chitosan

Covalent modification of shortened multiwalled carbon nanotubes (MWNTs) with a natural low molecular weight chitosan (LMCS) was accomplished by the nucleophilic substitution reaction. The LMCS modified MWNTs (MWNT-LMCS) were characterized by FTIR, solid-state 13C NMR, and XPS spectroscopies, thermogravimetric analysis, and transmission electron microscopy. The results revealed that amino and primary hydroxyl groups of the LMCS participated mainly in the formation of the MWNT-LMCS conjugates. The MWNT-LMCS consists of 58 wt.% LMCS, and about four molecular chains of the LMCS were attached to 1000 carbon atoms of the nanotube sidewalls. As a novel derivative of the MWNTs, the MWNT-LMCS not only solved in DMF, DMAc and DMSO, but also in aqueous acetic acid solution.     

Aromatic reduction of residue oil of naphtha cracking over bimetallic Pt−Pd catalysts supported on mesoporous molecular sieve

An Al-containing mesoporous molecular sieve (Al-MMS) was prepared by hydrolysis of H₂SiF₆ and Al(NO₃)₃·9H₂O. NH₃-TPD results suggest that the acidity of Al-MMS was less than that of dealuminated zeolite. Y. The potential use of mesoporous molecular sieve as a new support material for dearomatization of residue oil of naphtha cracking was described. In case of C₉ ⁺ and PGO feed, Pt?Pd/Al-MMS showed a higher activity than Pt?Pd/dealuminated zeolite Y catalyst. This is ascribed to its better accessibility of bulky molecules, and much less cracking activity due to mild acidity, indicating high yield of liquid. Thus, Pt?Pd/Al-MMS catalyst can be applied effectively to the hydrogenation of aromatic compounds in the residue oil of a commercial naphtha cracker.     

Polyacrylonitrile molecular weight effect on the structural and magnetic properties of metal–carbon nanomaterial

1. Download high-res image (259KB)
2. Download full-size image

     

Preparation of carbon molecular sieves from palm shell: effect of benzene deposition conditions

Application of carbon molecular sieve (CMS) for gas separation has been found much attention recently. In this work, CMS was prepared from locally available palm shell through carbonization, steam activation and carbon vapour deposition (CVD) technique. After carbonization step, the char produced was subjected to steam activation at various activation times. The activated carbon obtained at 53.2% burn-off, which contain the highest amount of micropore volume was further used in CVD step by using benzene vapour at various deposition conditions. The performance of CMSs produced was examined by assessing the adsorption kinetics of O₂, N₂, CO₂ and CH₄ gases. All CMS samples showed a small N₂ and CH₄ uptake compared to the O₂ and CO₂. The suitable conditions for CVD were found at 800°C, 30 min and 30 vol% benzene of deposition temperature, time and benzene concentration, respectively. At this point the O₂/N₂ and CO₂/CH₄ uptake ratios arrived 7.1 and 16.0, respectively.     

Molecular dynamics assessment of doxorubicin–carbon nanotubes molecular interactions for the design of drug delivery systems

Carbon nanotubes (CNTs) constitute an interesting material for nanomedicine applications because of their unique properties, especially their ability to penetrate membranes, to transport drugs specifically and to be easily functionalized. In this work, the energies of the intermolecular interactions of single-walled CNTs and the anticancer drug doxorubicin (DOX) were determined using the AMBER 12 molecular dynamics MM/PBSA and MM/GBSA methods with the aim of better understanding how the structural parameters of the nanotube can improve the interactions with the drug and to determine which structural parameters are more important for increasing the stability of the complexes formed between the CNTs and DOX. The armchair, zigzag, and chiral nanotubes were finite hydrogen-terminated open tubes, and the DOX was encapsulated inside the tube or adsorbed on the nanotube surface. Pentagon/heptagon bumpy defects and polyethylene glycol (PEG) nanotube functionalization were also studied. The best interaction occurred when the drug was located inside the cavity of the nanotube. Armchair and zigzag nanotubes doped with nitrogen, favored interaction with the drug, whereas chiral nanotubes exhibited better drug interactions when having bumpy defects. The π-π stacking and N-H…π electrostatic interactions were important components of the attractive drug-nanotube forces, enabling significant flattening of the nanotube to favor a dual strong interaction with the encapsulated drug, with DOX–CNT equilibrium distances of 3.1–3.9 Å. These results can contribute to the modeling of new drug-nanotube delivery systems.

     

Nanostructural organization in carbon disulfide∕ionic liquid mixtures: molecular dynamics simulations and optical Kerr effect spectroscopy

In this paper, the nanostructural organization and subpicosecond intermolecular dynamics in the mixtures of CS(2) and the room temperature ionic liquid (IL) 1-pentyl-3-methylimidazolium bis{(trifluoromethane)sulfonyl}amide ([C(5)mim][NTf(2)]) were studied as a function of concentration using molecular dynamics (MD) simulations and optical heterodyne-detected Raman-induced Kerr effect spectroscopy. At low CS(2) concentrations (<10 mol.% CS(2)/IL), the MD simulations indicate that the CS(2) molecules are localized in the nonpolar domains. In contrast, at higher concentrations (≥10 mol.% CS(2)/IL), the MD simulations show aggregation of the CS(2) molecules. The optical Kerr effect (OKE) spectra of the mixtures are interpreted in terms of an additivity model with the components arising from the subpicosecond dynamics of CS(2) and the IL. Comparison of the CS(2)-component with the OKE spectra of CS(2) in alkane solvents is consistent with CS(2) mainly being localized in the nonpolar domains, even at high CS(2) concentrations, and the local CS(2) concentration being higher than the bulk CS(2) concentration.     

Synthesis of a β-cyclodextrin derivate and its molecular recognition behavior on modified glassy carbon electrode by diazotization

A novel β-cyclodextrin (β-CD) derivative containing mono-phenylamino (MPA-β-CD) was newly synthesized by classical Mitsunobu reaction in good yield, and its structure has been confirmed by ¹H NMR, ¹³C NMR and electrospray ionization mass spectra. The compound MPA-β-CD was immobilized onto glassy carbon electrode (GCE) by diazotization, and with this modified electrode the binding behavior of MPA-β-CD for ferrocene (Fc) was investigated qualitatively, and the comparison of differential pulse voltammetry before and after immersion in ferrocene solution indicated that the MPA-β-CD immobilized GCE exhibited the molecular recognition behavior between β-CD and ferrocene.     

How much carbon dioxide can be stored in the structure H clathrate hydrates?: a molecular dynamics study

The stability of structure H (sH) carbon dioxide clathrate hydrates at three temperature-pressure conditions are determined by molecular dynamics simulations on a 3x3x3 sH unit cell replica. Simulations are performed at 100 K at ambient pressure, 273 K at 100 bars and also 300 K and 5.0 kbars. The small and medium cages of the sH unit cell are occupied by a single carbon dioxide guest and large cage guest occupancies of 1-5 are considered. Radial distribution functions are given for guests in the large cages and unit cell volumes and configurational energies are studied as a function of large cage CO(2) occupancy. Free energy calculations are carried out to determine the stability of clathrates for large cage occupancies at three temperature/pressure conditions stated above. At the low temperature, large cage occupancy of 5 is the most stable while at the higher temperature, the occupancy of 3 is the most favored. Calculations are also performed to show that the CO(2) sH clathrate is more stable than the methane clathrate analog. Implications on CO(2) sequestration by clathrate formation are discussed.     

Investigation of lipase-catalyzed Michael-type carbon–carbon bond formations

Conjugate additions of carbon nucleophiles to appropriate acceptor molecules were investigated with respect to the synthetic potential and stereochemistry of the products. Reactions of short-chain α,β-unsaturated ketones and mono-substituted nitroalkenes with CH-acidic carboxylic ester derivatives were catalyzed by various immobilized lipases. Using methyl nitroacetate complete conversion with methyl vinyl ketone and trans-β-nitrostyrene was obtained. The reactions proceeded without enantioselectivity. Evidence for enzyme catalysis is provided by the observation that after denaturation of Candida antarctica lipase B or inhibition no reaction took place. Docking studies with the chiral addition product methyl 2-methyl-2-nitro-5-oxohexanoate did not reveal any specific binding mode for this reaction product, which would have been the requirement for stereoselective additions. These results support the experimental findings that the conjugate addition takes place without enantiopreference.     

Metal free amide synthesis via carbon–carbon bond cleavage

A metal-free oxidative coupling of methyl ketones and primary amines to amides has been developed. The reaction tolerates a variety of functional groups, and is operationally simple. The reaction is proposed to go through a radical pathway to form the triiodomethyl ketone intermediate and the amide is formed by the nucleophilic attack of amine on triiodomethyl ketone carbonyl.     

Highly active ferrocenylamine-derived palladacycles for carbon–carbon cross-coupling reactions

{[(N-Methyl-N-p-R-benzyl)amino]benzyl}ferrocenes 4a–c (R = H(a), OCH₃(b), CH₃(c)) were synthesized by N-methylation of the corresponding sec-amines 3a–cwith the reagent CH₃I-t-BuOK. Treatment of 4a–c with Na₂PdCl₄ in the presence of NaOAc produced a pair of palladacycles σ-Pd[(η⁵-C₅H₅)Fe(η⁵- C₅H₃CH(C₆H₅)N(CH₃)CH₂-C₆H₄-R)]Cl(PPh₃) 5a–c (R = same as before) consisting of R_NR_P and S_NS_P configurations. The structure of 5a was determined by single crystal X-ray analysis. High catalytic activities of 5a–c for the Suzuki coupling of aryl chlorides with phenylboronic acid and the Heck reaction of bromobenzene with styrene were observed.     

A carbon–carbon hybrid – immobilizing carbon nanodots onto carbon nanotubes

The thrust of this work is to integrate small and uniformly sized carbon nanodots (CNDs) with single-walled carbon nanotubes (SWCNT) of different diameters as electron donors and electron acceptors, respectively, and to test their synergetic interactions in terms of optoelectronic devices. CNDs (denoted pCNDs, where p indicates pressure) were prepared by pressure-controlled microwave decomposition of citric acid and urea. pCNDs were immobilized on single-walled carbon nanotubes by wrapping the latter with poly(4-vinylbenzyl trimethylamine) (PVBTA), which features positively charged ammonium groups in the backbone. Negatively charged surface groups on the CNDs lead to attractive electrostatic interactions. Ground state interactions between the CNDs and SWCNTs were confirmed by a full-fledged photophysical investigation based on steady-state and time-resolved techniques. As a complement, charge injection into the SWCNTs upon photoexcitation was investigated by ultra-short time-resolved spectroscopy.     

The influence of interunit carbon–carbon linkages during lignin upgrading

The cleavage of β-O-4 linkages in lignin can generate monomers with a phenyl propane structure that can easily be upgraded into valuable hydrocarbon biofuels and renewable aromatic chemicals. High-yield lignin monomer production from extracted (or technical) lignin that is produced in a practical way could facilitate the productivity and profitability of biomass conversion processes. However, interunit carbon–carbon (C–C) linkages present in native lignin or formed during lignin condensation in biomass pretreatments dramatically reduce lignin monomer yields. Here, we present a perspective on biological and chemical strategies that have been successfully used to reduce the formation of C–C linkages in native or technical lignin. We analyze the mechanisms involved in these strategies and offer our views on improving the quality of technical lignin resulting from biomass conversion in order to achieve high-yield lignin monomer production.     

Ni-catalyzed carbon–carbon bonds cleavage of mixed polyolefin plastics waste

The inert carbon–carbon(C–C) bonds cleavage is a main bottleneck in the chemical upcycling of recalcitrant polyolefin plastics waste. Here we develop an efficient strategy to catalyze the complete cleavage of C–C bonds in mixed polyolefin plastics over non-noble metal catalysts under mild conditions. The nickelbased catalyst involving Ni₂Al₃ phase enables the direct transformation of mixed polyolefin plastics into natural gas, and the gas carbon yield reaches up to 89.6%. R...