Wing wettability of Odonata species as a function of quantity of epicuticular waxes

Dragonflies have gained much attention due to their sophisticated wing surface structure, and their associated superhydrophobic, self-cleaning and bactericidal properties. In this work, we compared and contrasted the chemical composition and surface morphology of the wing membranes of four species of dragonfly and damselfly from the Odonata family collected in 1970s (Diplacodes melanopsis and Xanthagrion erythroneurum) and 2011 (Diplacodes bipunctata, and Ischnura heterosticta). Diplacodes species are dragonflies, whilst Xanthagrion and Ischnura are damselflies. Fourier-transform infrared spectroscopy data obtained from the Australian Synchrotron were used to classify the fundamental components of all four of the insect species’ wings. The spectra of all species were dominated by CH stretching, amide I and amide II and OH stretch absorbance indicating the presence of a similar membrane composition of chitin, protein and wax in all four species. Although the samples were collected 40 years apart, there was no evidence of degradation having taken place during this time. Despite the overall similarities in spectral profile, species-specific differences were observed, most notably in the intensity of the νCH₂ peaks, which in part reflected the amount of waxes present on the wings, which appeared to be different between individual species. The surface topography also contained minor differences in the diameter and the spacial distribution of its nanopillars. It is postulated that the differences in surface wettability of the wings could be attributed to these minor differences in surface chemistry and surface topography. For example, X. erythroneurum presented the highest water contact angle (WCA) of 160° whilst the D. melanopsis wings exhibited the lowest WCA (138°), and the wettability of their wings was found to directly correlate with the intensity of hydrocarbon peaks found in their respective IR specta.     

A new anhydrous proton conducting material based on phosphoric acid doped polyimide

A new anhydrous proton conducting material based on polyimide and phosphoric acid composite was prepared. The interaction between polyimide (PI) and phosphoric acid was investigated by FTIR. The results show that phosphoric acid interacts with polyimides mainly by hydrogen bonds rather than by protonation of PI at room temperature. Environmental scanning electron microscopy (ESEM) was employed to study the surface morphology of the membranes. The results show that the surface of PI-xH₃PO₄ membranes is very compact and homogeneous. Proton conductivity and methanol permeability of PI doped with phosphoric acid (PI-xH₃PO₄) were also studied. Proton conductivity of PI-xH₃PO₄ membranes increases with increasing concentration of phosphoric acid. Hydrogen bond seems to play an important role in the proton conductivity of this system. Effects of osmotic on the direct diffusion process of methanol in the membranes can be negligible due to the absence of micro-pore structure as already shown in ESEM results. Effects of methanol concentration and temperature on the methanol permeability of PI-xH₃PO₄ membranes were also discussed. Methanol permeability in PI-xH₃PO₄ membranes decreases with increasing methanol concentration, and increases with increasing temperature.     

Anhydrous proton conducting membranes based on crosslinked graft copolymer electrolytes

A comb-like copolymer consisting of a poly(vinylidene fluoride-co-chlorotrifluoroethylene) backbone and poly(hydroxy ethyl acrylate) side chains, i.e. P(VDF-co-CTFE)-g-PHEA, was synthesized through atom transfer radical polymerization (ATRP) using CTFE units as a macroinitiator. Successful synthesis and a microphase-separated structure of the copolymer were confirmed by proton nuclear magnetic resonance (¹H NMR), FT-IR spectroscopy, and transmission electron microscopy (TEM). This comb-like polymer was crosslinked with 4,5-imidazole dicarboxylic acid (IDA) via the esterification of the –OH groups of PHEA and the –COOH groups of IDA. Upon doping with phosphoric acid (H₃PO₄) to form imidazole–H₃PO₄ complexes, the proton conductivity of the membranes continuously increased with increasing H₃PO₄ content. A maximum proton conductivity of 0.015 S/cm was achieved at 120 °C under anhydrous conditions. In addition, these P(VDF-co-CTFE)-g-PHEA/IDA/H₃PO₄ membranes exhibited good mechanical properties (765 MPa of Young's modulus), and high thermal stability up to 250 °C, as determined by a universal testing machine (UTM) and thermal gravimetric analysis (TGA), respectively.     

Effect of in situ oxidization with potassium permanganate on the morphologies of SEBS membranes

The morphologies of the asymmetric membranes of polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) prepared and simultaneously oxidized with different substrate solutions were investigated with atomic force microscopy (AFM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and attenuated total reflectance infrared spectroscopy (ATR-FTIR). We used the KMnO₄ aqueous solution and KMnO₄/H₂SO₄ mixture solution as solvent-casting substrates, as well as oxidized reagents. The surface composition and functional groups of membranes were also measured. The effect of casting substrates on morphological changes was discussed through possible chemical reactions. It was found that the SEBS membranes were transformed from an ordered microphase-separated structure to disordered nodular or sponge-like structures. The former might be contributed to MnO₂ depositions while the latter was caused by the bond interruption, after KMnO₄ or KMnO₄/H₂SO₄ oxidizing.     

A spontaneous solid-state NO donor to fight antibiotic resistant bacteria

This study substantiates the chemical origin of a free-radical-driven antibacterial effect at the surface of biomedical silicon nitride (Si₃N₄) in comparison with the long-known effect of oxygen reduction by oxidized TiO₂ at the surface of biomedical titanium alloys. Similar to the antibacterial effect exerted by reactive oxygen species (ROS; i.e., superoxide anions, hydroxyl radicals, singlet oxygen, and hydrogen peroxide) from TiO₂, reactive nitrogen species (RNS), such as nitrous oxide (N₂O), nitric oxide (NO), and peroxynitrite (^?OONO) in Si₃N₄, severely affect bacterial metabolism and lead to their lysis. However, in vitro experiment with gram-positive Staphylococcus epidermidis (S. epidermidis, henceforth) revealed that ROS and RNS promoted different mechanisms of lysis. Fluorescence microscopy of NO radicals and in situ time-lapse Raman spectroscopy revealed different metabolic responses of living bacteria in contact with different substrates. After 48 h, the DNA of bacteria showed complete destruction on Si₃N₄, while carbohydrates of the peptidoglycan membrane induced bacterial degradation on Ti-alloy substrates. Different spectroscopic fingerprints for bacterial lysis documented the distinct effects of RNS and ROS. Spontaneously activated in aqueous environment, the RNS chemistry of Si₃N₄ proved much more effective in counteracting bacterial proliferation as compared to ROS formed on TiO₂, which requires external energy (photocatalytic activation) to enhance effectiveness. Independent of surface topography, the antibacterial effect observed on Si₃N₄ substrates is due to its unique kinetics ultimately producing NO and represents a new intriguing avenue to fight bacterial resistance to conventional antibiotics.     

Preparation and characterization of novel polyimide/functionalized ZnO bionanocomposite for gas separation and study of their antibacterial activity

In the present investigation novel Polyimide/functionalized ZnO (PI/ZnO) bionanocomposites containing amino acid (Methionine) and benzimidazole pendent groups with different amounts of modified ZnO nanoparticles (ZnO NPs) were successfully prepared through ultrasonic irradiation technique. Due to the high surface energy and tendency for agglomeration, the surface ZnO NPs was modified by a coupling agent as 3- methacryloxypropyl-trimethoxysilane (MPS) to form MPS-ZnO nanoparticles. The ultrasonic irradiation effectively changes the rheology and the glass transition temperature and the crystallinity of the composite polymer. PI/ZnO nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscope (TEM). TEM analysis showed that the modified ZnO nanoparticles were homogeneously dispersed in polymer matrix. The TGA results of PI/ZnO nanocomposites showed that the thermal stability is obviously improved the presence of MPS-ZnO NPs in comparison with the pure PI and that this increase is higher when the NP content increases. The permeabilities of pure H₂, CH₄, O₂, and N₂ gases through prepared membranes were determined at room temperature (25 °C) and 20 bar feed pressure. The membranes having 20% ZnO showed higher values of H₂ permeability, and H₂/CH₄ and H₂/N₂ ideal selectivities (the ratio of pair gas permeabilities) compared with other membranes. The antibacterial activity of bionanocomposite films was tested against gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis) and gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa). Further, it was observed that antibacterial activity of the resulting hybrid biofilms showed somewhat higher for gram-positive bacteria compared to gram-negative bacteria.     

Development and Evaluation of Gold 3D Cylindrical Nanoelectrode Ensembles

Gold 3D cylindrical nanoelectrode ensembles （NEEs）, 100 nm in diameter and 500 nm in length were prepared by electroless template synthesis in polycarbonate filter membranes, followed by selective controlled chemical etching. The morphology of the nanowires and cylindrical NEEs was imaged by scanning electron microscopy. The protruding nanoelectrodes were in good parallel order. EDX study showed that the nanoelectrode elements consisted of pure gold. The electrochemical evaluation of the 3D electrodes was conducted using the well known [Fe（CN）6]^3-/[Fe（CN）6]^4- couple. Cyclic voltammgrams （CV） show a very low double layer charging current and a higher ratio of signal to background current than 2D disc NEEs. Electrochemical impedance spectroscopy （EIS） indicates that the 3D cylindrical NEEs effectively accelerate the charge transfer process, which is in consistent with the results of CV. The linear relationship with a slope of 0.5 between lg Ipc and lg v shows that linear diffusion is dominant on the 3D cylindrical NEEs at conventional scan rates.     

Topography of dipalmitoyl-phosphatidyl-choline monolayers penetrated by β-casein

In this work we have analyzed the topography by atomic force microscopy (AFM) of dipalmitoyl-phosphatidyl-choline (DPPC) monolayers previously spread at the air–water interface and penetrated by β-casein. AFM images of β-casein–DPPC monolayers were taken from Langmuir–Blodgett films deposited onto hydrophilic mica substrates at different initial surface pressures (π_i) and after the compression of the mixed films. The monolayer topography depends on the initial structure of the phospholipid:liquid expanded (LE) at 3 mN/m, coexistence between LE and liquid condensed (LC) structures at 7 mN/m, at the end of the LE–LC transition at 10 mN/m, and with a LC structure at 15 mN/m. The area occupied by DPPC domains in the mixed film increases with the π_i value, especially for DPPC with a LC structure at 15 mN/m. At this surface pressure the thickness of the film is at a maximum. After the film compression at 25 mN/m, which is above the equilibrium spreading pressure of β-casein (), this protein is displaced from the interface by DPPC and the topography of the mixed monolayer depends on the initial structure of the DPPC monolayer. A notable feature of the topography of these mixed monolayers is the presence of multilayers of β-casein and DPPC of high thickness (50–70 nm) at the lower π_i values. Although the film is dominated by DPPC at the highest surface pressures (at 25 mN/m), β-casein is not displaced totally from the interface and coexists as β-casein collapsed domains within the network of the DPPC structure.     

Facile sonochemical synthesis and photoluminescent properties of lanthanide orthophosphate nanoparticles

Uniform lanthanide orthophosphate LnPO₄ (Ln=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho) nanoparticles have been systematically synthesized via a facile, fast, efficient ultrasonic irradiation of inorganic salt aqueous solution under ambient conditions without any surfactant or template. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) spectra as well as kinetic decays were employed to characterize the samples. The SEM and the TEM images show that the hexagonal structured lanthanide orthophosphate LnPO₄ (Ln=La, Ce, Pr, Nd, Sm, Eu, Gd) products have nanorod bundles morphology, while the tetragonal LnPO₄ (Ln=Tb, Dy, Ho) samples prepared under the same experimental conditions are composed of nanoparticles. HRTEM micrographs and SAED results prove that these nanostructures are polycrystalline in nature. The possible formation mechanism for LnPO₄ (Ln=La-Gd) nanorod bundles is proposed. Eu³⁺-doped LaPO₄ and Tb³⁺-doped CePO₄ samples were also prepared by using the same synthetic process, which exhibit an orange-red (Eu³⁺:⁵D₀-⁷F_{1, 2, 3, 4}) and green (Tb³⁺, ⁵D₄-⁷F_{3, 4, 5, 6}) emission, respectively.     

Transforming 3D CAU-10-H into 2D Materials with High Base Stability for Membrane Separation

Two-dimensional (2D) nanomaterials have received a significant research attention owing to their unique chemical and physical properties. These materials not only provide the chemically active sites and exposed surface atoms, but also display the porous nature suitable for their use as membranes for gas separation. In this study, 3D CAU-10-H has been transformed into a novel alkali stabilized 2D CACl-10 (180). Though CACl-10 (180) is similar to AlOOH, it is a novel 2D nanomaterial synthesized by using 4-chloroisophthalic acid and aluminum nitrate nonahydrate, with thermal decomposition at 300 °C. Further, CACl-10 (180) is noted to retain its framework structure in strong alkali solutions, attributed to the alkali-resistant aluminum hydroxide. At the same time, it has been demonstrated that 3D CAU-10-H can also transform into 3D CACl-10 (140) and 3D CACl-10 (130), and the halogen atoms of the ligands (−Cl) affect the alkali stability of the materials. Subsequently, the PVAm-CACl-10 (180)/MPSf mixed matrix membranes were prepared and applied for CH₄/N₂ separation. The developed membrane exhibits the CH₄ permeance of 1647.99 GPU with a CH₄/N₂ selectivity of 3.1. As a result, 2D CACl-10 (180), with a strong alkali stability and an acceptable CH₄/N₂ membrane separation performance, represents a high potential of application in the membrane separation process.     

Tailoring the properties of electrospun PHBV mats: Co-solution blending and selective removal of PEO

Microstructure, surface topography, thermal and mechanical features of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) electrospun non-woven mats were modified, modulated and tailored through blending with different polyethylene oxide (PEO) amounts (20, 30 and 50% wt/wt). The optimal parameters of the soaking protocol for the selective removal of the sacrificial polymer were accurately identified by means of scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy, simultaneous thermogravimetric and differential analyses (TG-DTA) and differential scanning calorimetry (DSC). The complete PEO removal after soaking in H₂O for 7 days with daily refreshment was confirmed. The resulting samples were only comprised of PHBV fibers characterized by a remarkable decrease of the average size with respect to the respective blends. Their surface topography was corrugated and rough and presented nodules, pits, nanopores, shallow and elongated nanostructured indents/grooves along the fiber axis. A remarkable reduction (>75%) of the tensile modulus (E) of electrospun PHBV mats (15–20 MPa) was obtained, maintaining comparable elongation at break (ε_max) values (20–30%).     

Preparation and luminescence properties of Ce and/or Tb doped LaPO4 nanofibers and microbelts by electrospinning

Ce³⁺ and/or Tb³⁺ doped LaPO₄ nanofibers and microbelts have been prepared by a combination method of sol-gel process and electrospinning. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), low voltage cathodoluminescence (CL) and time-resolved emission spectra as well as kinetic decays were used to characterize the resulting samples. SEM and TEM results indicate the as-formed precursor fibers and belts are smooth, and the as-prepared nanofibers and microbelts consist of nanoparticles. The doped rare-earth ions show their characteristic emission under ultraviolet excitation, i.e. Ce³⁺ 5d-4f and Tb³⁺⁵D₄-⁷F_J (J=6-3) transitions, respectively. The energy transfer process from Ce³⁺ to Tb³⁺ in LaPO₄:Ce³⁺, Tb³⁺ nanofibers was further studied by the time-resolved emission spectra. Under low-voltage electron beam excitation, LaPO₄:Ce³⁺, Tb³⁺ microbelt phosphors have a higher intensity than that of nanofiber phosphors.     

PEO-PVP blended Na+ ion conducting solid polymeric membranes

Polyethylene oxide (PEO)-polyvinylpyrrolidone (PVP) blended Na⁺ ion conducting solid polymeric membranes: (1?x) [75PEO:25NaPO₃] + x PVP, where 0 < x < 12 wt%, are reported. The polymeric blending was done using a solventfree hot-press method. Two orders of conductivity enhancement (σ ca. 1.07 × 10^?5 S·cm^?1) have been achieved with 3 wt% of PVP (i.e. the composition: [97(75PEO:25NaPO₃) + 3PVP]), from that of the pure host: (75PEO:25NaPO₃). The conductivity enhancement in PEO-PVP blended solid polymeric membranes have been explained by the ionic conductivity, ionic mobility and mobile ion concentration measurements. Materials characterization and polymer-salt complexation were done with the help of X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA) studies. The temperature dependent conductivity studies have also been done to compute the activation energy (E _a) values from lg σ1/T Arrhenius plots. A solid state polymeric battery was fabricated by using optimum conducting composition of solid polymer electrolyte (SPE OCC), and some important cell parameters were also calculated from the discharge profile of the cell.     

An Fe3O4 nanoparticle-supported Mn (II)-azo Schiff complex acts as a heterogeneous catalyst in alcoholysis of epoxides

In this paper, an azo-containing Schiff base complex of manganese [Mn²⁺-azo ligand@APTES-SiO₂@Fe₃O₄] immobilized on chemically modified Fe₃O₄ nanoparticles has been used as a magnetically retrievable catalyst for the alcoholysis of different epoxides to their corresponding alkoxy alcohols with methanol, ethanol and n-propanol. The newly magnetic nanoparticles (MNPs) were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and vibrating sample magnetometry (VSM).     

One-dimensional GdVO4:Ln (Ln=Eu, Dy, Sm) nanofibers: Electrospinning preparation and luminescence properties

One-dimensional GdVO₄:Ln³⁺ (Ln=Eu, Dy, Sm) nanofibers have been prepared by a combination method of sol-gel process and electrospinning technology. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), photoluminescence (PL), quantum efficiency (QE), and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The XRD, FT-IR, and TG-DTA results show that GdVO₄:Ln³⁺ nanofibers samples crystallize at 700 °C. SEM images indicate that the as prepared precursor fibers are smooth. After being calcined at 700 °C for 4 h, the fibers still maintain their fiberlike morphology with rough surface. TEM image further manifests that the GdVO₄:Ln³⁺ nanofibers consist of nanoparticles. Under ultraviolet excitation and low-voltage electron beam excitation, GdVO₄:Ln³⁺ phosphors showed their strong characteristic emission due to an efficient energy transfer from vanadate groups to dopants. The optimum doping concentration of Ln³⁺ in the GdVO₄ nanofibers also has been investigated.     

Enhancing the performance of TFC nanofiltration membranes by adding organic acids in polysulfone support layer

Throughout this study, the effect of certain organic acids, methacrylic acid, lactic acid and tartaric acid, doped in polysulfone (PSF) casting solution onto the performance of nanofiltration (NF) membranes was investigated. Different NF membranes have been prepared from m-phenylenediamine and trimesoylchloride onto the top surface of the acid-modified PSF membranes through regulating the concentration and contact time of the conventional interfacial polymerization process. The study of scanning electron microscopy (SEM) was used to investigate the influence of acids on the morphology of membranes and cross-sectional structures. The functional groups, hydroxyl and carboxylic acid, of the acids have resulted in a significant increase in membrane thickness, porosity and hydrophilicity, with a decrease in macrovoid capacity of the PSF layer. The acid-modified PSF/TFC membranes showed higher rejection of salt, with an increment in water flux compared to the neat membrane. Water flux and salt rejection (R_s %) of the control membrane was 7.6 L/m² h and 65.4%, whereas polysulfone/methacrylic acid (PSF/MAAc), polysulfone/tartaric acid (PSF/TAc), and polysulfone/lactic acid (PSF/LAc) were 16.8, 18.5, and 20.2 L/m² h and 88, 88.2 and 94.1%, respectively. Efficiency of prepared NF membranes under various inlet pressures and specific salts was investigated with selectivity and salt rejection. The salt rejection of a mixed salt solution was found to meet the order of R_s % CaSO₄ ≥ R_s % Na₂SO₄ ˃ R_s % MgSO₄ ˃ R_s MgCl₂ ˃ Rs % NaCl.     

Poly(3-dodecylthiophene) membranes for gas separations

Solution cast membranes of poly(3-dodecylthiophene) (PDDT) were studied for the room temperature separation of N₂, O₂, and CO₂. A procedure for fabricating reproducible, smooth, uniformly thick (∼35 μm), defect-free membranes is described. Permeability values were measured for as-cast PDDT membranes (P_N2=9.4, P_O2=20.2, P_CO2=88.2 Barrers) and selectivity values were calculated (α_O2/N2=2.2, α_CO2/N2=9.4). Chemically induced oxidation (∼23%) with SbCl₅ resulted in a decrease in permeability (P_N2=3.5, P_O2=10.5, P_CO2=48.5 Barrers) and a corresponding increase in permselectivity (α_O2/N2=3.0, α_CO2/N2=14.0). Reduction of the oxidized membrane with hydrazine partially reversed these trends (P_N2=5.4, P_O2=15.1, P_CO2=62.9 Barrers, α_O2/N2=2.8, α_CO2/N2=11.6). The chemical compositions of as-cast, oxidized, and hydrazine-treated PDDT membranes were determined using elemental analysis and energy dispersive X-ray spectrometry. Membrane microstructure was investigated by optical microscopy, TappingMode™ atomic force microscopy and scanning electron microscopy. The composition and microscopy results were correlated with changes in gas-transport properties.     

Pt‐Pd‐Co Trimetallic Alloy Network Nanostructures with Superior Electrocatalytic Activity towards the Oxygen Reduction Reaction

Pt alloy nanostructures show great promise as electrocatalysts for the oxygen reduction reaction (ORR) in fuel cell cathodes. Herein, three‐dimensional (3D) Pt‐Pd‐Co trimetallic network nanostructures (TNNs) with a high degree of alloying are synthesized through a room temperature wet chemical synthetic method by using K₂PtCl₄/K₃Co(CN)₆–K₂PdCl₄/K₃Co(CN)₆ mixed cyanogels as the reaction precursor in the absence of surfactants and templates. The size, morphology, and surface composition of the Pt‐Pd‐Co TNNs are investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected‐area electron diffraction (SAED), energy dispersive spectroscopy (EDS), EDS mapping, X‐ray diffraction (XRD), and X‐ray photoelectron spectroscopy (XPS). The 3D backbone structure, solid nature, and trimetallic properties of the mixed cyanogels are responsible for the 3D structure and high degree of alloying of the as‐prepared products. Compared with commercially available Pt black, the Pt‐Pd‐Co TNNs exhibit superior electrocatalytic activity and stability towards the ORR, which is ascribed to their unique 3D structure, low hydroxyl surface coverage and alloy properties.     

Hydrothermal synthesis and luminescent properties of LuBO3:Tb microflowers

Hexagonal vaterite-type LuBO₃:Tb³⁺ microflower-like phosphors have been successfully prepared by an efficient surfactant- and template-free hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectrometry, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The as-obtained phosphor samples present flowerlike agglomerates composed of nanoflakes with thickness of 40 nm and high crystallinity in spite of the moderate reaction temperature of 200 °C. The reaction mechanism has been considered as a dissolution/precipitation mechanism; the self-assembly evolution process has been proposed on homocentric layer-by-layer growth style. Under ultraviolet excitation into the 4f⁸→4f⁷5d transition of Tb³⁺ at 248 nm (or 288 nm) and low-voltage electron beam excitation, LuBO₃:Tb³⁺ samples show the characteristic green emission of Tb³⁺ corresponding to ⁵D₄→⁷F_{6, 5, 4, 3} transitions with the ⁵D₄→⁷F₅ transition (542 nm) being the most prominent group, which have potential applications in fluorescent lamps and field emission displays.     

Mixed Dimensional Nanostructure (UiO-66-Decorated MWCNT) as a Nanofiller in Mixed-Matrix Membranes for Enhanced CO2/CH4 Separation

Mixed-matrix membranes (MMMs) with combination of two distinct dimensional nanofillers (such as 1D-3D, 2D-3D, or 3D-3D, etc.) have drawn special attention for gas separation applications due to their concerted effects on gas permeation and mechanical properties. An amine-functionalized 1D multiwalled carbon nanotube (NH₂-MWCNT) with exceptional mechanical strength and rapid gas transport was crosslinked with an amine-functionalized 3D metal-organic framework (UiO-66-NH₂) with high CO₂ affinity in a Schiff base reaction. The resultant crosslinked mixed-dimensional nanostructure was used as a nanofiller in a polysulfone (PSf) polymer matrix to explore the underlying synergy between 1D and 3D nanostructures on the gas separation performance of MMMs. Cross-sectional scanning electron microscopy and mapping revealed the homogenous dispersion of UiO-66@MWCNT in the polymer matrix. The MMM containing 5.0 wt. % UiO-66@MWCNT demonstrated a superior permeability 8.3 Barrer as compared to the 4.2 Barrer of pure PSf membrane for CO₂. Moreover, the selectivity (CO₂/CH₄) of this MMM was enhanced to 39.5 from the 28.0 observed for pure PSf under similar conditions of pressure and temperature.