Facilitated transport of Am(III) through a flat-sheet supported liquid membrane (FSSLM) containing tetra(2-ethyl hexyl) diglycolamide (TEHDGA) as carrier

Facilitated transport of Am(III) in nitric acid medium using tetra(2-ethyl hexyl) diglycolamide (TEHDGA) in n-dodecane as carrier was studied. It was aimed at finding out the physico-chemical model for the transport of Am(III) using TEHDGA/n-dodecane as carrier under various experimental parameters like feed acidity, carrier concentration, varying strippant, varying membrane pore size, etc. The feed acidity and carrier concentrations were varied from 1 M to 6 M HNO₃ and 0.1 M to 0.3 M TEHDGA/n-dodecane, respectively. The transport of Am(III) increased with increase in feed acidity and carrier concentration reaching maximum at 3 M HNO₃ and 0.2 M TEHDGA/n-dodecane, respectively. Several stripping agents were tested and 0.1 M HNO₃ was found to be the most suitable stripping agent for this system. Almost quantitative transport of Am(III) was observed at about 180 min with feed acidity of 3 M HNO₃, 0.1 M HNO₃ as strippant and 0.2 M TEHDGA/n-dodecane as carrier. The pore size of the membrane support was varied from 0.20 μm to 5 μm and the permeation coefficient increased with increase in pore size up to 0.45 μm (2.43 × 10⁻³ cm/s), and then decreased with further increase in pore size. The plot between permeation coefficient vs. (membrane thickness)⁻¹ was linear which showed that the Am(III) transport was membrane diffusion limited. The membrane diffusion coefficient calculated from the graph was found to be 1.27 × 10⁻⁶ cm²/s and its theoretical value was 1.22 × 10⁻⁶ cm²/s. The stability of the carrier against leaching out of the membrane support as well as the integrity of membrane support was studied over a period of 30 days and was found to be satisfactory within the studied time period.     

4-双(1-苯基-3-甲基-4-吡唑啉-5-酮)甲烷的晶体结构

杂环化合物1 苯基 3 甲基 4 吡唑啉 5 酮(ＨＰＭＰ)为β 二酮,不仅可用作金属离子的萃取剂,还可用于核磁共振的位移试剂,也可用于激光、催化、生化、医学等领域[1-4]。我们从ＰＭＰ出发,合成了它的Ｃｏ(Ⅱ),Ｎｉ(Ⅱ),Ｃｕ(Ⅱ)和Ｚｎ(Ⅱ)的络合物[5,6]。利用单晶Ｘ 射线衍射分析方法报道了标题化合物的晶体结构。1　实验部分在合成ＰＭＰ席夫碱化合物的过程中,得到标题化合物的单晶体。元素分析结果(括号内为计算值)Ｃ%:69 87(69 98),Ｈ%:5 62(5 59),Ｎ:15 61(15 55)。红外光谱(ＫＢｒ):1645和1637ｃｍ-1的强吸收峰归属为羰基的伸缩振动,…     

Instability mechanisms of supported liquid membranes for copper (II) ion extraction

The instability of supported liquid membranes (SLMs) for use in copper (II) ion extraction was investigated in this paper. The degradation behavior of these SLMs was monitored in situ by electrochemical impedance spectroscopy (EIS). The electrical properties of a SLM cell can be described by an equivalent circuit, R_s(C_mR_m)Q. The model parameters, membrane resistance (R_m) and membrane capacitance (C_m) can be used to characterize the degradation behavior of SLMs. Experimental data for R_m and C_m indicated that the loss of membrane liquid (ML) during the mass transfer process consists of three stages. Results also suggest that emulsion formation was the dominant instability mechanism for these SLMs. The solubility and osmotic pressure were also shown to not be major factors contributing to the instability although both contributed to the loss of the liquid membrane. The pore size of the polymeric support increased during the first run but remained almost constant in subsequent runs.     

Selective transport of copper(II) ions across a liquid membrane mediated by Piroxicam

Piroxicam was found to be a highly selective carrier for uphill transport of Cu²⁺ ions through a chloroform liquid membrane. The transport occurs via a counterflow of protons from the receiving phase to the source phase. The effects of several parameters on the transport of Cu²⁺ ions, such as the carrier concentration, pH of the source phase, composition of the receiving phase, and duration are described. A high transport efficiency (98±2%) was provided by the carrier for Cu²⁺ ions in a receiving phase of 0.01 mol l⁻¹ sulfuric acid after 4 h. Different metal ion transport experiments showed that Cu²⁺ ions were selectively transported over other ions, such as Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, UO₂²⁺ and ZrO₂²⁺. In the presence of fluoride ions (used as a suitable masking agent in the source phase), the interfering effects of UO₂²⁺ and ZrO₂²⁺ ions were eliminated. The applicability of the method was tested on a real sample, and the results obtained show that it is potentially useful for solvent extraction of copper.     

A study of the Claisen rearrangement of 7-(3-phenyl-2-propenyloxy)-3-phenyl-(4H)-1-benzopyran-4-one derivatives

Summary The Claisen rearrangement of 7-(3-phenyl-2-propenyloxy)-3-phenyl-(4H)-1-benzopyran-4-one (2 a) gave 7-hydroxy-8-(1-phenyl-2-propenyl)-3-phenyl-(4H)-1-benzopyran-4-one (3 a) and 2,3-dihydro-2,6-diphenyl-3-methyl-(7H)furo[2,3-h]-1-benzopyran-7-one (7 a). 2-Methyl-7-(3-phenyl-2-propenyloxy)-3-phenyl-(4H)-1-benzopyran-4-one (2 b) afforded4 b and7 b. 8-Methyl-7-(3-phenyl-2-propenyloxy)-3-phenyl-(4H)-1-benzopyran-4-one (12) gave only the alkali soluble product 7-hydroxy-8-methyl-6-(1-phenyl-2-propenyl)-3-phenyl-(4H)-1-benzopyran-4-one (13).3 a,4 b, and13 were further cyclized in acidic medium to9 a,10 b, and14 followed by dehydrogenation.This paper is dedicated to Dr. F. M. Dean, Department of Organic Chemistry, Robert Robinson Laboratories, University of Liverpool, Liverpool, U. K., on his retirement     

Highly selective transport of silver ion through a supported liquid membrane using calix[4]pyrroles as suitable ion carriers

Facilitated transport of silver ion across a supported liquid membrane (SLM) by calix[4]pyrroles, as selective ion carriers, dissolved in kerosene has been investigated. The influences of fundamental parameters affecting the transport of silver ion including ion carrier concentration in the membrane phase, thiosulfate concentration in strip phase, picric acid concentration in the feed phase, stirring speed of aqueous phases, type of membrane solvent and time of transport have been studied. In the presence of thiosulfate as a suitable metal ion acceptor in the strip phase and picrate ion as ion pairing agent in the source phase, transport of silver occurs almost quantitatively after 75 min. The selectivity and efficiency of silver transport from aqueous solution containing Cu²⁺, Mg²⁺, Ni²⁺, Ca²⁺, Zn²⁺, Pb²⁺, Co²⁺, Al³⁺, Hg²⁺, Cd²⁺, Fe³⁺, Fe²⁺ and Cr³⁺ were investigated.     

Facilitated Cd(II) transport across CTA polymer inclusion membrane using anion (Aliquat 336) and cation (D2EHPA) metal carriers

PIMs have been involved as affinity membranes for recovery of metals (Cd, Pb, Zn) by facilitated transport from aqueous solutions under different speciation forms, either anionic or cationic. The motivation of this work is to compare the efficiency of the recovery process in the case of Cd(II) using extractants such as D2EHPA and Aliquat 336 that can form complexes with the cation Cd²⁺ or the anions CdCl₃⁻ and CdCl₄²⁻, respectively. The maximal Cd(II) recovery factors obtained in 8 h are 97.5% and 91.8% with D2EHPA and Aliquat 336, respectively. Although the transport fluxes with both carriers are not strongly different (ca. 2 μmol m⁻² s⁻¹), the recovery process in case of mixture of metals is better achieved with Aliquat 336. PIMs have shown a very good stability and a constancy of the transmembrane transport flux over 12 replicate measurements, each one lasting for 8 h repeated every 24 h.     

Facilitated transport of CO2 across a liquid membrane: Comparing enzyme, amine, and alkaline

In this work we compare the efficiency of facilitated transport of CO₂ across a liquid membrane by different facilitators as tested in either a supported liquid membrane (SLM) or a hollow fiber contained liquid membrane (HFCLM) configuration. Permeance and selectivity were evaluated by both experimental test and numerical simulation. These comparisons were used to define the best liquid membrane composition to maximize separation performance. We also consider other factors that affect the choice of the facilitator, e.g. operation temperature and cost. Under ambient operating conditions, carbonic anhydrase (CA) combined with an alkaline carbonate gives better performance than does diethanolamine (DEA).     

Effect of aniline derivatives on the extraction of cobalt with 1-phenyl-3-methyl-4-benzoylpyrazol-5-one in toluene

Summary The effect of aniline derivatives [4-methylaniline=4-toluidine, 3,4-dimethylaniline=3,4-xylidine, N,N-dimethylaniline and tribenzylamine (Am)] on the extraction of cobalt from sulphate, nitrate and perchlorate aqueous media of 1.0M ionic strength with 1-phenyl-3-methyl-4-benzoylpyrazol-5-one (HL) in toluene, has been quantitatively studied. With both primary amines a synergic effect was found owing to theAmH·CoL ₃ ion pair extraction. TheAmH·CoL ₃ average formation constant, from CoL ₂ andAmH·CoL, was logK _s =3.7 and 3.8 forAm=4-toluidine and 3,4-xylidine respectively. With N,N-dimethylaniline and tribenzylamine which are poorly protonated in the cobalt extractionpH range (4–6), no noticeable synergism was observed.On leave from: Department of Inorganic Chemistry, Chemical Faculty, Ignacy Lukasiewicz Technical University, PL-35-959 Rzeszow, Poland     

Synergistic solvent extraction of lanthanides with mixtures of 1-phenyl-3-methyl-4-benzoyl-pyrazol-5-one and aliphatic amines: Influence of the ammonium salt ions

Summary The synergistic solvent extraction of Pr, Gd, and Yb with mixtures of 1-phenyl-3-methyl-4-benzoyl-pyrazol-5-one (HP) and tridodecylammonium (TDAHA), trioctylammonium (TOAHA), and dioctylammonium (DOAHA) salts (A ^–=Cl^–, NO ₃ ^– , and ClO ₄ ^– ) in C₆H₆ has been studied. The composition of the extracted species has been determined asAmH⁺[LnP ₄]^– (AmH⁺: ammonium salt cation). The values of the equilibrium constant have been calculated. The influence of the ammonium salt ions on the extraction process is discussed.

---

Synergetische Extraktion von Lanthaniden mit Mischungen aus 1-Phenyl-3-methyl-4-benzoyl-pyrazol-5-on und aliphatischen Aminen: Einfluß der Ammoniumsalzionen

Zusammenfassung Die synergetische Extraktion von Pr, Gd und Yb mit Mischungen aus 1-Phenyl-3-methyl-4-benzoyl-pyrazol-5-on (HP) und Tridodecylammonium-(TDAHA), Trioctylammonium-(TOAHA) und Dioctylammoniumsalzen (DOAHA) (A ^–=Cl^–, NO ₃ ^– und ClO ₄ ^– ) in C₆H₆ wurde untersucht. Die Zusammensetzung der Extraktionskomplexverbindungen wurde zuAmH⁺[LnP ₄]^– bestimmt; die Gleichgewichtskonstanten wurden berechnet. Der Einfluß der Ionen des Ammoniumsalzes auf die Extraktion wird diskutiert.

     

Enamine Configuration of 5-Methyl-2-phenyl-4-[（Z）-3-tolylamino-phenylmethylene]pyrazol-3（2H）-one

1 INTRODUCTION In contrast to the old-line academic and practical studies of 1-phenyl-3-methyl-4-benzoyl-5-pyrazo- lone (PMBP) on the metal coordination chemistry[1], the complexes of β-ketoamines derivated from PMBP received little attention due to its complicated com- plexation. However, in recent years, there has a sudden growth of this area as a result of its timely interest in biological activities[2]. Recently, a series of β-ketoamines[3] containing PMBP have been prepared fro…     

Some new Cu(II) complexes containing an ON donor Schiff base: Synthesis, characterization and antibacterial activity

Six new copper(II) complexes, CuLCl·H₂O (1), CuL(NO₃)·2H₂O (2), [Cu(L)₂] (3), CuL(SCN)·2H₂O (4), CuL(ClO₄)·2H₂O (5) and (CuL)₂(SO₄)·4H₂O (6), where HL = 1-phenyl-2,3-dimethyl-4-(N-2-hydroxy-4-methoxy-benzaldehyde)-3-pyrazolin-5-one, have been synthesized. The characterization of the newly formed compounds was done by ¹H NMR, UV-Vis, IR, ESR spectroscopy, elemental analysis and molar electric conductivity. The crystal structure of 1-phenyl-2,3-dimethyl-4-(N-2-hydroxy-4-methoxy-benzaldehyde)-3-pyrazolin-5-one has been determined by X-ray diffraction studies, as well as the crystal structure of one of its copper(II) complexes, [Cu(L)₂] (3). The copper atom is coordinated to two nitrogen and two oxygen atoms of the Schiff base ligand. The in vitro antibacterial activity against Klebsiella pneumoniae ATCC 100131, Staphylococcus aureus var. Oxford 6538, Pseudomonas aeruginosa ATCC 9027 and Escherichia coli ATCC 10536 strains was studied and compared with that of free ligand. The anti-microbial activity was dependent on the microbial species tested and the metal salt anion used.     

Selective removal of Cu versus Ni, Zn and Mn by using a new carrier in a supported liquid membrane

A study on transport, kinetic selectivity and stability in SLM operations using a new carrier, the molecule 2-hydroxy-5-dodecylbenzaldehyde (2H5DBA) in kerosene, is described. A simple transport model is derived to evaluate the mass transfer coefficient in the membrane. Finally a comparison with the di-(2-ethylhexyl) phosphoric acid (D2EHPA) carrier in kerosene is made. The SLM system was employed and tested in the removal of Cu²⁺ from wastewater by using the operating conditions obtained from L–L extraction tests. Studies on the kinetics of copper extraction by using the 2H5DBA showed that complexation reaction is very fast. Transport tests were performed at different carrier concentrations (10%, 30%, 50% (v/v)) showing the improvement of SLM performance with increasing its concentration. Operating the SLM at optimum conditions (50% (v/v) 2H5DBA concentration in kerosene, feed pH 5, strip pH 2.2) final copper concentrations in the feed and strip phases were, respectively, 2.0 and 47.0 mg L⁻¹, starting from 50 mg L⁻¹ in the feed, meaning a significant up-hill transport. The fluxes (J) were calculated by fitting the experimental data of copper concentration in the feed by an exponential equation. They were used to calculate the transport (kinetic) selectivities of Cu²⁺ SLM separation over Ni²⁺, Zn²⁺ and Mn²⁺, given by the ratio J₀(Cu)/J₀(M), where M = Ni, Zn and Mn. The values were 37.4, 48.2 and 42.1, respectively. Transport and stability tests at the optimal carrier concentration by using the 2H5DBA and the D2EHPA in kerosene were carried out to compare them in terms of flux, lifetime and mass transfer coefficients. Experimental data evidenced for 2H5DBA a lower copper flux (8.67 mmol h⁻¹ m⁻² versus 36.71 mmol h⁻¹ m⁻²), a lower lifetime (20 h versus 57 h) and lower mass transfer coefficient in the membrane (3.00 × 10⁻⁷ m s⁻¹ versus 2.00 × 10⁻⁶ m s⁻¹) but the selectivity of the separation process can overcome the disadvantages.     

Synthesis of 1,7-Bis(4-hydroxyphenyl)-3-hydroxy-1,3-heptadien-5-one

l,7-Bis(4-hydroxyphenyl)-3-hydroxy-1,3-heptadien-5-oneIIwagfirstlyisolatedfromtheseedsofAIPiniablepharocalyxK.Schum.(Zingiberaceae)asanoveldiarylheptanoid.Meanwhile,l,7-his(4-hydroxyphenyl)-3-hydroxy-l,3,6-heptatTien-5-one2,aknowndiarylheptanoid,wasisolatedaswell.Therecentpublication'reportedthatIstronglyinhibitedtheaggregationofplateletinducedbycollagen,arachidonicacidandadenosinediphosphate.AdditionalresearchZprovedthat2couldactasaninhibitoroftheHIV-1integrase.Byourfindings,thesynthesi…     

Extraction and carrier mediated transport of urea using noncyclic receptors through liquid membrane systems

Extraction and carrier mediated transport through bulk liquid membrane and supported liquid membrane systems have wide applications in separation technology. This paper highlights the use of six noncyclic receptors (podands) having variations in chain length and end group for the removal of urea using liquid membrane system. These receptors R_1, R_2, R_3, R_4, R_5, R₆ are diethylene glycol dimethyl ether, diethylene glycol dibutyl ether, diethylene glycol dibenzoate, diethylene glycol, triethylene glycol and tetraethylene glycol respectively. The sequence of extraction and transport of urea by BLM system using various receptors is R₂ > R₃ > R₁ > R₄ > R₅ > R₆ and R₆ ≈ R₃ > R₅ > R₄ > R₁ > R₂ respectively. Receptor R₂ containing butyl end group is best extractant while receptor R₆ with flexible backbone is best carrier and this carrier efficiency is used to remove urea using BLM system from the feed phase by recyclization process up to 88.16%. The experimental results influenced by concentration of receptors and urea. Effect of time was also studied.     

3-苯基喹唑啉-4(3H)-酮的合成及晶体结构

标题化合物C14H10ON2是由邻硝基苯甲酰苯胺与原甲酸三乙酯在低价钛试剂作用下反应而得。结构通过单晶X-射线衍射分析确定, 其晶体属于单斜晶系, 空间群P21/c, a = 12.080(2), b = 7.793(1), c = 11.599(1) ? b = 97.56(1), Mr = 222.24, V = 1082.4(2) ?, Dc = 1.364 g/cm3, Z = 4, m(MoKa) = 0.88 mm-1, F(000) = 464, R = 0.0385, wR = 0.0851。X-衍射分析表明: 平面I (C(1)~C(6))与平面II (C(9)~C(14))之间的夹角为124.38; 平面I与平面III (ON(1)?N(2)C(7)C(8)C(9)C(14))之间的两面角为125.47; 平面II与平面III之间的两面角为2.76。     

One-pot synthesis of 3-(2-cyanophenyl)quinazolin-4(3H)-one

Anthranilonitrile reacting with formic acid at room temperature for three days gave 64% of 3-(2-cyanophenyl)quinazolin-4(3H)-one. Under similar conditions anthranilic acid. 4-nitroaniline, and 2,5-dichloroaniline were N-formylated in good yields.Institute of Organic Chemistry and Technology, Silesian Technical University, Krzywoustego, 4, 44–100 Gliwice, Poland; e-mail: wojtex@zeus.polsl.gliwice.pl. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 922–924, July, 2000.     

Facilitated transport of palladium(II) across polymer inclusion membrane with ammonium ionic liquid as effective carrier

This work focuses on the application of polymer inclusion membrane (PIM) with tricaprylmethylammonium thiosalicylate, [A336][TS] (TOMATS), a thiol-containing task-specific ionic liquid for the transport of Pd(II) ions from aqueous solutions. 0.3 M thiourea in 0.1 M hydrochloric acid was found the most effective stripping phase in the transport of Pd(II) from membrane phase containing TOMATS. Separation of Pd(II) ions was also carried out from hydrochloric acid solution containing Pt(IV), Fe(III), Ni(II), and Mn(II). Pd(II) ions were preferably transported in the presence of these metal ions. The separation coefficients followed the order: S _Pd/Pt < S _Pd/Fe < S _Pd/Ni < S _Pd/Mn. [A336][TS] proved to be an excellent ion carrier for Pd(II) from hydrochloric acid solution. The results also showed that transport efficiency of the PIM was reproducible and it can be useful for the development of the simple and highly effective method of Pd(II) recovery from leach liquor of spent catalysts.     

Synthesis and Crystal Structure of Trans-4-[(5-(2,4-Dichlorophenoxy)-3-methyl-1-phenyl-1H-pyrazol-4-yl)methyleneamino]-1,5-dimethyl-2-phenyl-1,2-dihydropyrazol-3-one

The title compound trans-4-[(5-(2,4-dichlorophenoxy)-3-methyl-1-phenyl-1H-pyra-zol-4-yl)methyleneamino]-1,5-dimethyl-2-phenyl-1,2-dihydropyrazol-3-one 3 (C28H23Cl2N5O2, Mr = 532.41) has been synthesized and its crystal structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in triclinic, space group P1 with a = 8.9438(4), b = 11.6065(5), c = 14.2215(6) , α = 112.566(1), β = 92.324(2), γ = 102.91(1)o, V = 1315.65(10) 3, Z = 2, Dc = 1.344 g/cm3, μ(MoKα) = 0.282 mm-1, λ = 0.71073 , F(000) = 552, the final R = 0.0587 and wR = 0.1578 for 5071 observed reflections (I > 2σ(I)). X-ray analysis reveals that the product is a thermodynamically stable trans isomer. Intra-and intermolecular C(12)-H(12)···O(1) and C(28)-H(28)···O(1)#1 hydrogen bonds were observed in the title compound.     

Synthesis, characterization and luminescence properties of copper(I) complexes containing 2-phenyl-3-(benzylamino)-1,2-dihydroquinazolin-4(3H)-one and triphenylphosphine as ligands

Some copper(I) complexes of the formula [Cu(L)(PPh₃)₂]X (1-4) [where L = 2-phenyl-3-(benzylamino)-1,2-dihydroquinazolin-4(3H)-one; PPh₃ = triphenylphosphine; X = Cl⁻, NO₃⁻, ClO₄⁻ and BF₄⁻] have been prepared and characterized on the basis of elemental analysis, IR, UV-Vis and ¹H NMR spectral studies. The representative complex of the series 4 has been characterized by single crystal X-ray diffraction which reveal that in the complex the central copper(I) ion assumes the irregular distorted-tetrahedral geometry. Cyclic voltammetry of the complexes indicate a quasireversible redox behavior corresponding to Cu(II)/Cu(I) couple. All the complexes exhibit intraligand (π → π^∗) fluorescence with high quantum yield in dichloromethane solution.