Hydrophobic effects on rates and substrate selectivities in polymeric transaminase mimics

The amination of ketoacids to amino acids by pyridoxamine is greatly accelerated when the pyridoxamine is covalently linked to polyethylenimine carrying N-methyl and N-lauryl groups. Michaelis-Menten kinetics is seen with all substrates, from which the effect of the lauryl groups and the methyl groups can be determined with respect to the strength of binding of the substrate and the rate constant k2 within the complex. The polyamine catalyzes the reaction using acid and base groups, the lauryl groups increase k2 by producing a nonpolar medium in which the reaction occurs, and the lauryl groups promote binding of hydrophobic substrates. The result is that the amination of indolepyruvic acid to produce tryptophan is accelerated by 240000-fold.     

The influence of short strong hydrogen bonding on the structure and the physicochemical properties of alkyl-N-iminodiacetic acids in solid state and aqueous systems

Alkyl-N-iminodiacetic acids with varying alkyl chain lengths have been prepared and characterized with respect to structure, acidic properties, and ability to form aggregates in water. The alkyl-N-iminodiacetic acids are the group of ligands with the lowest molecule weight which can be characterized as chelating surfactants, compounds with surface chemical properties which at the same time have a high ability to bind metal ions. The solid alkyl-N-iminodiacetic acids have a unique structure with neutral zwitterionic units linked together to polymer chains through a short strong hydrogen bond, d(O(-H)...O) approximately 2.46 A, and where the nu(O-H) stretching vibration at ca. 720 cm(-1) supports the presence of such a hydrogen bond. The polymer chains are cross-linked together to bilayers through relatively strong hydrogen bonds between ammonium and carboxylate groups, and where the parallel alkyl groups are interdigitating each other; the bilayer surface consists of hydrophilic iminodiacetic acid groups. The acidic properties of monomeric alkyl-N-iminodiacetic acids in water are in the expected ranges with pK(a) values of about 1.7, 2.3, and 10.3. n-Octadecyl-N-iminodiacetic acid, present as aggregates in water, displays very acidic properties of the first proton, and a substantially weakened acidity of the second proton, pK(a2) = 5.5-7.5, depending on ionic strength, and pK(a3) = 9.5-10.5. This pattern of the acidic constants strongly indicates that the polymer structure with short strong hydrogen bonds is maintained in the aggregates and that such bonds can exist in aqueous systems if they are supported by a strong and rigid backbone structure, as the bilayers of well-organized long interdigitating alkyl chains in the studied systems. Hydrogenbis(methyl-N-iminodiacetic acid) perchlorate precipitates from perchloric acidic solutions of methyl-N-iminodiacetic acid. The structure is built up of dimers of zwitterionic methyl-N-iminodiacetic acid units linked together by an extra proton in a short strong hydrogen bond, d(O(-H)...O) approximately 2.456(6) A, and nu(O-H) = 789 cm(-1).     

Dendrimeric pyridoxamine enzyme mimics

PAMAM dendrimers from generations 1-6 were synthesized with pyridoxamine in their core. They transaminated pyruvic and phenylpyruvic acids in water to alanine and phenylalanine, respectively, with Michaelis-Menten kinetics and high effectiveness compared with simple pyridoxamine. The largest dendrimers-similar in size to some globular proteins-were comparable in effectiveness to a previous polyethylenimine (PEI)-pyridoxamine catalyst, and to a protein-pyridoxamine catalyst, but not as effective as a previous PEI-pyridoxamine carrying lauryl hydrophobic groups. The new catalysts showed both general acid/base catalysis by their amino groups and hydrophobic binding of the phenylpyruvate substrate.     

单壁碳纳米管与卤代烷的亲电加成反应

主要考察了以路易斯酸为催化剂,几种卤代烷烃为反应试剂的单壁碳纳米管侧壁的亲电加成反应,并通过傅立叶红外光谱、热失重分析和拉曼光谱验证了实验所得产物。此反应的目的是在单壁碳纳米管的侧壁连上烷基基团以提高其溶解性和分散性,并可使其更好地与聚烯烃相结合从而提高复合材料的性能,因而具有较高的研究和应用价值。     

Preparation and characterization of humidity sensor based on poly(3-alkyl)pyrrole containing phosphonic acid groups

Poly(3-alkyl)pyrroles containing phosphonic acid groups with different alkyl segment lengths were chemical synthesized and the properties were measured by FTIR and UV-Vis spectroscopy. FTIR and UV-Vis results showed that the synthesized polymers were in a low doping level through chemical polymerization. By spin-coating on the surface of substrates, the polymer can be used as a humidity sensor. The change of DC electric current of the polypyrroles varies with the chain length of the alkyl substituents. The capacitance increases with the increase of the humidity and resistance decreases with the increase of humidity. This result is different from that of polypyrrole without alkyl substituents due to the influence of the phosphonic acid group. The sensor showed the resistive-type at high relative humidity, and the capacitivetype at the low relative humidity. The sensor exhibited very fast response to the change of environment humidity.     

Isotactic polyethylenimines induce formation of L-amino acids in transamination

Isotactic polyethylenimines with (S)-benzyl side chains were synthesized from 4-(S)-4-benzyl-2-oxazolines. When alpha-keto acids were subjected to transamination in the presence of this polymer, and a pyridoxamine coenzyme modified with hydrophobic chains, enantioselectivity toward the natural isomer (l > d) was observed, followed by racemization of the amino acid products. However, the racemization did not occur when the coenzyme was covalently attached to the polymer. [reaction: see text]     

Acid‐Labile Thermoresponsive Copolymers That Combine Fast pH‐Triggered Hydrolysis and High Stability under Neutral Conditions

Biodegradable polymeric materials are intensively used in biomedical applications. Of particular interest for drug‐delivery applications are polymers that are stable at pH 7.4, that is, in the blood stream, but rapidly hydrolyze under acidic conditions, such as those encountered in the endo/lysosome or the tumor microenvironment. However, an increase in the acidic‐degradation rate of acid‐labile groups goes hand in hand with higher instability of the polymer at pH 7.4 or during storage, thus posing an intrinsic limitation on fast degradation under acidic conditions. Herein, we report that a combination of acid‐labile dimethyldioxolane side chains and hydroxyethyl side chains leads to acid‐degradable thermoresponsive polymers that are quickly hydrolyzed under slightly acidic conditions but stable at pH 7.4 or during storage. We ascribe these properties to high hydration of the hydroxy‐containing collapsed polymer globules in conjunction with autocatalytic acceleration of the hydrolysis reactions by the hydroxy groups.     

High conversion free-radical suspension polymerization: End groups in poly(methyl methacrylate) and their influence on the thermal stability

Suspension free-radical polymerization of vinyl monomers, carried out in the presence of alkyl mercaptans as chain-transfer agents, is analyzed. A model which accounts for the development with conversion of the polymer weight fractions having particularly tagged end groups, namely sulfur-containing and unsaturated end groups, is presented. The best current theories for diffusion-controlled polymerizations are included in the model. The sulfur content of poly(methyl methacrylate), determined as a function of conversion by a microcoulometric method, is in good agreement with the values predicted from polymerization kinetics. The rate of weight loss of the produced polymers is then related to the content of the unsaturated end groups. By comparing experimental thermal stability indexes (from thermogravimetry and isothermal heating experiments) to calculated polymer weight fractions, it is shown that the thermal stability of poly(methyl methacrylate) produced in the presence of alkyl mercaptans approximately depends on the square of the weight fraction of the polymer chains with an unsaturated end group.     

Electrically Conducting Thiophene Polymers

Electrically conducting 3-alkylthiophene polymers with pentyl, octyl, dodecyl, and hexadecyl alkyl groups were prepared. Iodine, trifluoroacetic acid, and dodecylbenzenesulfonic acid were used as dopants of the polymer backbone. The conductivities of the doped films were in the range 10^?6 to 10^?1S/cm. Applications of the prepared materials in electronics and optoelectronics were examined.     

Imine polymers containing chiral nanohoops in the backbone obtained through [2 + 2] cyclocondensation

A simple method for synthesis of polymers containing shape persistent imine macrocycles as nanohoops in the main chain is studied. It is based on the cyclocondensation reaction carried out in solution and room temperature of triphenylamine-based tetraaldehyde compounds with (R,R)-trans-1,2-diaminocyclohexane. The pristine polymer P1 bearing long alkyl groups is soluble during the synthesis but becomes insoluble after precipitation due to the strong and multiple C H/π and π-π stacking intermolecular interactions from arene–arene species and entanglement and interpenetrating of flexible alkyl groups inside of rigid macrocycle hollow. Polymer without any solubilizing groups ( P2 ) separates during the polymerization as an insoluble material. Both polymers are amorphous and have good thermal and environmental stability. They have a low surface area because discrete nanovoids introduced by macrocycles are disconnected in the amorphous polymers and non-accessible for gas adsorption. Polymers have inherent luminescent properties due to triphenylamine groups and chirality derived from (R,R)-conformation of the cyclohexane skeleton. In presence of picric acid (PA), the polymer fluorescence in solid state or suspension is strongly quenched, thus the polymers can work as efficient fluorescent probes toward nitrophenolic compounds. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2565–2573     

Side‐Chain Modification and “Grafting Onto” via Olefin Cross‐Metathesis

Olefin cross‐metathesis is introduced as a versatile polymer side‐chain modification technique. The reaction of a poly(2‐oxazoline) featuring terminal double bonds in the side chains with a variety of functional acrylates has been successfully performed in the presence of Hoveyda–Grubbs second‐generation catalyst. Self‐metathesis, which would lead to polymer–polymer coupling, can be avoided by using an excess of the cross‐metathesis partner and a catalyst loading of 5 mol%. The results suggest that bulky acrylates reduce chain–chain coupling due to self‐metathesis. Moreover, different functional groups such as alkyl chains, hydroxyl, and allyl acetate groups, as well as an oligomeric poly(ethylene glycol) and a perfluorinated alkyl chain have been grafted with quantitative conversions.     

环化橡胶光交联产物的降解动力学和十二烷基苯磺酸的增溶机理

本文研究了在烷基苯磺酸作用下,环化橡胶类感光性高分子光交联产物降解反应的动力学行为。测定了在链长不一的烷基苯磺酸作用下,降解反应的级数和降解反应的活化能,讨论了烷基的链长以及烷基链长不一的苯磺酸浓度对降解反应速率的影响,提出了降解反应的增溶机理,证实了十二烷基苯磺酸对环化橡胶类感光性高分子光交联产物的降解反应有较大的促进作用。     

Alkyl chain branching in ethylene–vinyl acetate copolymer

Ethylene–vinyl acetate copolymers contain two kinds of side chains: acetoxy branches originating from incorporated vinyl acetate and alkyl branches. The alkyl branching was determined by infrared analysis after converting the ethylene–vinyl acetate copolymer to a hydrocarbon polymer by three steps: hydrolysis, iodation with hydriodic acid containing red phosphorus, and reductive hydrogenation with lithium aluminum hydride. It was found that physical properties such as stiffness were dependent both on the degree of alkyl chain branching and on vinyl acetate content.     

High- and low-spin Fe(III) complexes of various AGE inhibitors

Density functional theory calculations [CPCM/UM06/6-31+G(d,p)] were used to elucidate the structures and relative stability of Fe(III) complexes with various ligands that inhibit the formation of advanced glycation end products (AGEs) or iron overloaded disease (viz. aminoguanidine, pyridoxamine, LR-74, Amadori compounds, and ascorbic acid). EDTA was used as the free energy reference ligand. The distorted neutral octahedral complex containing one iron atom and three molecules of pyridoxamine [Fe(PM)(3)] was found to be the most stable. The stability of the complexes decreases in the following chelate sequence: pyridoxamine, Amadori complex, aminoguanidine, LR inhibitor, and ascorbic acid.     

Dynamically Controllable Emission of Polymer Nanofibers: Electrofluorescence Chromism and Polarized Emission of Polycarbazole Derivatives

Electrochemical polymerization of a series of N‐alkyl‐2,7‐di(2‐thienyl)carbazoles in acetonitrile was performed to obtain conjugated polymers with fluorescence. Scanning electron and atomic force microscopies revealed that the surface morphology of the polymer films significantly depends on the alkyl chain lengths of the polymers. Particularly, a homopolymer bearing hexyl groups and copolymers with an average alkyl chain length of six carbon atoms show nanofiber morphology. The polymer nanofibers were stacked on a substrate electrode. The fluorescence of the polymer nanofiber film was tunable with application of voltage, with good repeatability. The X‐ray diffraction pattern of the fibers showed the structural order. The polymer nanofibers thus prepared showed an electrochemically driven change in polarized photoluminescence.     

pH‐sensitive hemolysis by random copolymers of alkyl acrylates and acrylic acid

We have been designing and synthesizing synthetic polymers that mimic viral fusogenic peptides, which contain peptide residues having alkyl groups and carboxyl groups. We have synthesized two different types of such polymers, and their abilities to hemolyse red blood cells at pH 7.4 and 5.5 are compared here. The polymers are poly(2‐alkylacrylic acid)s such as poly(2‐propylacrylic acid), and random copolymers of poly(alkyl acrylate‐co‐acrylic acid) where the alkyl group is propyl or butyl. We have found that the poly(2‐alkylacrylic acid)s such as poly(2‐propylacrylic acid) are significantly more hemolytic at acidic pH than the random copolymers of equivalent propyl and carboxyl contents.     

Synthesis and antibacterial activities of water‐soluble methacrylate polymers containing quaternary ammonium compounds

New water‐soluble methacrylate polymers with pendant quaternary ammonium (QA) groups were synthesized and used as antibacterial materials. The polymers with pendant QA groups were obtained by the reaction of the alkyl halide groups of a previously synthesized functional methacrylate homopolymer with various tertiary alkyl amines containing 12‐, 14‐, or 16‐carbon alkyl chains. The structures of the functional polymer and the polymers with QA groups were confirmed with Fourier transform infrared and ¹H and ¹³C NMR. The degree of conversion of alkyl halides to QA sites in each polymer was determined by ¹H NMR to be over 90% in all cases. The number‐average molecular weight and polydispersity of the functional polymer were determined by size exclusion chromatography to be 32,500 g/mol and 2.25, respectively. All polymers were thermally stable up to 180 °C according to thermogravimetric analysis. The antibacterial activities of the polymers with pendant QA groups against Staphylococcus aureus and Escherichia coli were determined with broth‐dilution and spread‐plate methods. All the polymers showed excellent antibacterial activities in the range of 32–256 μg/mL. The antibacterial activity against S. aureus increased with an increase in the alkyl chain length for the ammonium groups, whereas the antibacterial activity against E. coli decreased with increasing alkyl chain length. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5965–5973, 2006     

Kinetic study of radical polymerization of dialkyl fumarates using electron spin resonance spectroscopy

The radical polymerization of dialkyl fumarates (DRF) bearing various ester alkyl groups was kinetically studied. The propagation and termination rate constants were determined using electron spin resonance (ESR) spectroscopy. The introduction of the bulky ester alkyl groups such as a tert-butyl group decreased the termination rate constant as expected. However, it has also been revealed that the bulky groups promote propagation despite the steric repulsion. The propagation rate and mechanism are discussed in relation to the propagation manner, i.e., tacticity of the polymer. © 1996 John Wiley & Sons, Inc.     

Chain mobility of some terephthalic acid polyesters in solution. A 13C spin-relaxation study

Carbon-13 spin-lattice relaxation times (T₁), nuclear Overhauser enhancements (NOE), and resonance linewidths (Δp) have been measured for a series of terephthalic acid polyesters containing ethyl, butyl, hexyl, and isopropyl groups between neighboring terephthalate units. The relaxation parameters of all carbons in the terephthalate groups are independent of the length of the separating alkyl chain. Reduced NOE's are seen for all carbons. The data are interpreted in terms of a log X²distribution of correlation times of constant width, but variable average mobility. The average mobility in the alkyl chain increases with increasing distance from the terephthalate group in a given polymer. For a given position in the chain. mobility increases with increasing chain length. This behavior is consistent with the presence of independently reorienting, highly solvated terephthalate groups.     

An amphiphilic approach to nanocrystal quantum dot-titania nanocomposites

The addition of octylamine-modified poly(acrylic acid) to nanocrystal quantum dots (NQDs) results in robust, alcohol-soluble nanoparticles that can be readily incorporated into titania matrices without large changes in photoluminescence quantum yields. This approach relies on the amphiphilic nature of the polymer to create an NQD-polymer complex in which the alkyl chains interact with the hydrophobic part of the NQD, leaving the polar carboxylic acid groups on the periphery. This procedure is applicable to hydrophobically capped NQDs of a variety of shapes and compositions, making it a truly generalized route to nanocrystal-titania nanocomposites.