Immobilized Lipase from Candida sp. 99–125 on Hydrophobic Silicate: Characterization and Applications

Lipase Candida sp. 99–125 has been proved to be quite effective in catalyzing organic synthesis reactions and is much cheaper than commercial lipases. Mesoporous silicates are attractive materials for the immobilization of enzymes due to their unique structures. The present research designed a hydrophobic silicate with uniform pore size suitable for the comfort of lipase Candida sp. 99–125 for improving its activity and stability. The resulting immobilized lipase (LP@PMO) by adsorption was employed to catalyze hydrolysis, esterification, and transesterification reactions, and the performances were compared with the lipase immobilized on hydrophilic silicate (LP@PMS) and native lipase. The LP@PMO showed as high activity as that of native lipase in hydrolysis and much increased catalytic activity and reusability in the reactions for biodiesel production. Besides, LP@PMO also possessed better organic stability. Such results demonstrate that immobilization of lipase onto hydrophobic supports is a promising strategy to fabricate highly active and stable biocatalysts for applications.     

Tuning Immobilized Commercial Lipase Preparations Features by Simple Treatment with Metallic Phosphate Salts

Four commercial immobilized lipases biocatalysts have been submitted to modifications with different metal (zinc, cobalt or copper) phosphates to check the effects of this modification on enzyme features. The lipase preparations were Lipozyme^®TL (TLL-IM) (lipase from Thermomyces lanuginose), Lipozyme^®435 (L435) (lipase B from Candida antarctica), Lipozyme^®RM (RML-IM), and LipuraSelect (LS-IM) (both from lipase from Rhizomucor miehei). The modifications greatly altered enzyme specificity, increasing the activity versus some substrates (e.g., TLL-IM modified with zinc phosphate in hydrolysis of triacetin) while decreasing the activity versus other substrates (the same preparation in activity versus R- or S- methyl mandelate). Enantiospecificity was also drastically altered after these modifications, e.g., LS-IM increased the activity versus the R isomer while decreasing the activity versus the S isomer when treated with copper phosphate. Regarding the enzyme stability, it was significantly improved using octyl-agarose-lipases. Using all these commercial biocatalysts, no significant positive effects were found; in fact, a decrease in enzyme stability was usually detected. The results point towards the possibility of a battery of biocatalysts, including many different metal phosphates and immobilization protocols, being a good opportunity to tune enzyme features, increasing the possibilities of having biocatalysts that may be suitable for a specific process.     

Immobilization of lipases on hydrophobilized zirconia nanoparticles: highly enantioselective and reusable biocatalysts

Our study has demonstrated for the first time that zirconia nanoparticles modified by a simple carboxylic surfactant of a very long alkyl chain can significantly enhance the activity of the immobilized lipases for asymmetric synthesis in organic media. Zirconia nanoparticles of ca. 20 nm diameter were grafted with carboxylic surfactant modifiers from Tween 85 and erucic acid. The surface of nanoparticles was successfully changed from hydrophilic to hydrophobic. Lipases from Candida rugosa and Pseudomonas cepacia were immobilized on the modified zirconia nanoparticles by adsorption in aqueous solution. The immobilized lipases were used for the resolution of ( R, S)-ibuprofen and ( R, S)-1-phenylethanol through esterification and acylation, respectively, in isooctane organic solvent. When immobilized on erucic acid-modified zirconia, both lipases gave significantly higher activity and enantioselectivity compared with those from their corresponding crude lipase powders. The nanohybrid biocatalysts are stable and can be reused for eight cycles without loss in activity and selectivity. The interaction between the hydrophobic surface of zirconia support and lipases probably induces the conformational rearrangement of lipases into an active, stable form.     

Regio-selective deprotection of peracetylated sugars via lipase hydrolysis

Purified lipases (via interfacial activation on hydrophobic supports) from different microbial extracts have been evaluated in the regio-selective hydrolysis of peracetylated sugars (peracetylated glucose, ribose and sucrose). Among the enzymes tested, lipases from Candida rugosa (CRL) and from Pseudomonas fluorescens (PFL) exhibited the best properties in these reactions.Then, we have prepared two different immobilized lipase preparations obtained by interfacial activation on hydrophobic supports or by covalent attachment on glutaraldehyde agarose. Interfacially activated lipases exhibited a higher activity than covalently attached enzymes (even by a 100-fold factor), giving the higher yields of mono deacetylated sugars (in some instances by more than a threefold factor) in short reaction times. In the hydrolysis of 1,2,3,5-tetra-O-acetyl-β-d-ribofuranose catalyzed by PFL adsorbed on octyl agarosa, hydrolyzed mainly the 3 position (30% of yield) while the CRL gave the hydrolysis only in position 5 (about 50% of yield).Depending on the enzyme immobilized preparation, we have been able also to obtain selective hydrolysis of 1,2,3,4,6-penta-O-acetyl-α/β-d-glucopyranose obtaining a free hydroxyl group in position 1, 4 or 6. Moreover, selective hydrolysis in the 4′ position of peracetylated sucrose was achieved when the hydrolysis is performed with CRL immobilized on octyl-agarose (yield was 77%).     

Catalytic effect of calix[n]arene based sol–gel encapsulated or covalent immobilized lipases on enantioselective hydrolysis of (R/S)-naproxen methyl ester

In this paper the catalytic performance of the immobilized lipases was investigated in the presence of calixarene based polymers using different immobilization techniques. For this reason, Candida rugosa lipase was encapsulated in sol–gel matrices using alkoxysilane precursors and calix[n]arene based silica polymers as additives. The hydrolytic activities of encapsulated lipases were evaluated and compared with the free lipase and covalently immobilized lipases (CnP-L). These encapsulated lipases were also used in the kinetic resolution of the R/S-Naproxen methyl ester. The results indicated that the C6P encapsulated lipase has significantly higher conversion and enantioselectivity as compared to the free lipase; other encapsulated lipases and CnP-L. The optimal pH and temperature region of the C6P encapsulated lipase in the kinetic resolution of the R/S-naproxen methyl ester were 7.0 and 55?°C. Nevertheless, the encapsulated lipases have good stability, adaptability and reusability in comparison with the free enzyme.     

Influence of the support on the reaction course of tributyrin hydrolysis catalyzed by soluble and immobilized lipases

Lipases from different origins have been immobilized in supports chosen by its different aquaphilicity and used as biocatalysts for the hydrolysis of tributyrin. The changes of the concentration of tri-, di-, monobutyrin, glycerol, and butyric acid during the reactions catalyzed by soluble, as well as immobilized, lipases were evaluated by gas chromatography. The experimental data were fitted to a simple kinetic model for the sequential reaction of tributyrin hydrolysis. The calculated apparent rate constants were different for the biocatalysts used and were apparently related to diffusional effects and aquaphilicity of the supports. Maximal yields of dibutyrin were found with the soluble Candida lipase, whereas the highest yield of monobutyrin (90%) was obtained with the least aquaphylic derivative (Candida-Celite).     

Calix[n]arene Carboxylic Acid Derivatives as Regulators of Enzymatic Reactions: Enhanced Enantioselectivity in Lipase-Catalyzed Hydrolysis of (R/S)-Naproxen Methyl Ester

Candida rugosa lipase was immobilized with a sol–gel encapsulation procedure in the presence and absence of a calix[n]arene carboxylic acid derivative grafted onto magnetic nanoparticles or in the presence of the calix[n]arene carboxylic acid derivative with Fe₃O₄ magnetic nanoparticles as an additive. Through the enantioselective hydrolysis of racemic naproxen methyl ester and the hydrolysis of p-nitrophenylpalmitate, the relative enzyme activity was evaluated and tested. These results show that the encapsulated lipase without supports has lower conversion and enantioselectivity compared to the Calix[n]COOH-based encapsulated lipase. It has also been observed that the Calix[4]COOH-based encapsulated lipase has excellent enantioselectivity (enantiomeric ratio (E)?>?400) as compared to encapsulated-free lipase enantioselectivity (E?=?137), and it also has an enantiomeric excess value of ~98 % for S-naproxen.     

Enhancement of the Activity and Enantioselectivity of Lipase by Sol–Gel Encapsulation Immobilization onto β-cyclodextrin-Based Polymer

Candida rugosa lipase was encapsulated within a chemically inert sol–gel support prepared by polycondensation with tetraethoxysilane and octyltriethoxysilane in the presence of β-cyclodextrin-based polymer. The catalytic activity of the encapsulated lipases was evaluated both in the hydrolysis of p-nitrophenylpalmitate and the enantioselective hydrolysis of racemic Naproxen methyl ester. It has been observed that the percent activity yield of the encapsulated lipase was 65 U/g, which is 7.5 times higher than that of the covalently immobilized lipase. The β-cyclodextrin-based encapsulated lipases had higher conversion and enantioselectivity compared with covalently immobilized lipase. The study confirms an excellent enantioselectivity (E >300) for the encapsulated lipase with an enantiomeric excess value of 98% for S-naproxen.     

Selection of hydrophobic membranes in the lipase-catalyzed hydrolysis of olive oil

A hydrophobic membrane (HVHP, polyvinylidene difluoride) was selected out of HVHP, PTHK and PTGC (polysulfone) membranes to immobilize Candida rugosa lipase by physical adsorption in the hydrolysis of olive oil in a stirred diffusion cell. A previous model that assumed the Michaelis–Menten kinetics and Langmuir adsorption isotherm for the adsorbed lipase was used to interpret the variation of initial hydrolysis rates with enzyme and substrate concentrations. Replacing the aqueous phase by a fresh buffer, with or without containing partially deactivated lipases, during the reaction did not affect the enzyme activity for the adsorbed lipase. Moreover, the same enzyme performance was obtained when a fresh and a regenerated membrane was used as the carrier in the membrane reactor.     

The Use of Lypolitic Microorganisms Pseudomonas fluorescens and Penicillium citrinum for the Preparation of Optically Active 1 -Hydroxyalkylphosphonates

Abstract

Lipases are perhaps the most widely used biocatalysts in organic synthesis. In this study lipases were found to catalyse the acetylation of diethyl 1-hydroxyalkylphosphonates, as well as 1-aminoalkylphosphonates. Unfortunately the lack of enantioselectivity was observed despite of the source of enzyme, as well as the type of organic solvent used as the reaction medium. Also the use of lipases for the enantioselective hydrolysis of diethyl O-butyryloxyalkylphosphonates in aqueous media was unsucceful. Qulte oppositively the hydrolysis of these substrates by wide-type strain of Pseudomonas fluorescens yielded optically active diethyl 1-hydroxyalkylphosphonates with moderate or good yields and of satisfactory optical purity, as determined by means of n.m.r. analysis of Mosher derivatives. The use of other lypolitic microorganism - Penicillium citrinum -was also succesful providing enantiomeric forms of the products obtained from the reaction catalyzed by Pseudomoms fluorescens. The substrate specificity of these two microorganisms, is discussed in some detail.     

Immobilization of Pseudomonas fluorescens Lipase onto Magnetic Nanoparticles for Resolution of 2-Octanol

The lipase from Pseudomonas fluorescens (Lipase AK, AKL) was immobilized onto the magnetic Fe₃O₄ nanoparticles via hydrophobic interaction. Enzyme loading and immobilization yield were determined as 21.4?±?0.5?mg/g and 49.2?±?1.8?%, respectively. The immobilized AKL was successfully used for resolution of 2-octanol with vinyl acetate used as acyl donor. Effects of organic solvent, water activity, substrate ratio, and temperature were investigated. Under the optimum conditions, the preferred isomer for AKL is the (R)-2-octanol and the highest enantioselectivity (E?=?71.5?±?2.2) was obtained with a higher enzyme activity (0.197?±?0.01???mol/mg/min). The results also showed that the immobilized lipase could be easily separated from reaction media by the magnetic steel and remained 89?% of its initial activity as well as the nearly unchanged enantioselectivity after five consecutive cycles, indicating a high stability in practical operation.     

Characterization of sol-gel immobilized lipases

The immobilization of lipases within a chemically inert hydrophobic sol-gel support, which is prepared by polycondensation of hydrolyzed tetramethoxysilane (TMOS) and methyltrimethoxysilane (MTMS) or iso-butyltrimethoxysilane (iso-BTMS), results in heterocatalysts. The heterocatalysts so prepared showed a dramatically enhanced catalytic activity and stability as measured by the hydrolysis and transesterification of soybean oil. The lipase/sol-gel materials were characterized by nitrogen adsorption to determine their specific surface area. Solid state NMR was used to reveal the degree of cross-linking of the sol-gel materials. Scanning electron microscopy and atomic force microscopy were used to observe the morphology of the biocatalysts. Transmission electron microscopy and confocal microscopy were used to investigate the enzyme distribution within the sol-gel materials. The characterization studies showed that the most active lipase-containing sol-gel was a non-porous amorphous material with enzyme randomly distributed throughout the sol-gel material. The activity of the immobilized enzyme did not correlate to the degree of cross-linking or the specific surface area of the sol-gel materials. The highly retained activity of the immobilized enzyme was more likely attributed to the conformational changes of the enzyme during the immobilization, which result in enzyme's fixation in a more favorable conformation and to the lipophilic environment of the hybrid matrix structure which facilitates the transport of the hydrophobic substrate to the active sites.     

Single-step purification of different lipases from Staphylococcus warneri

Three different lipases from the extract crude of Staphylococcus warneri have been purified by specific lipase–lipase interactions using different lipases (TLL, RML, PFL, BTL2) covalently attached to a solid support as adsorption matrix. BTL2 immobilized on glyoxyl-DTT adsorbed selectivity only a 30 kDa lipase from the crude, which was desorbed by adding 0.1% triton X-100. Using glyoxyl-PFL as matrix, two new lipases (28 and 40 kDa) were adsorbed, and completely pure 40 kDa lipase was obtained after desorption using 0.01% triton, whereas 28 kDa lipase was desorbed after the incubation of the lipase matrix with 3% detergent. When using other matrixes as glyoxyl-TLL or glyoxyl-RML, different lipases were adsorbed. This methodology could be a very efficient and useful method to purify several lipases from crude extracts from different sources.     

The Purification and Characterization of Lipases from <Emphasis Type="Italic">Lasiodiplodia theobromae</Emphasis>, and Their Immobilization and Use for Biodiesel Production from Coconut Oil

The coconut kernel-associated fungus, Lasiodiplodia theobromae VBE1, was grown on coconut cake with added coconut oil as lipase inducer under solid-state fermentation conditions. The extracellular-produced lipases were purified and resulted in two enzymes: lipase A (68,000 Da)—purified 25.41-fold, recovery of 47.1%—and lipase B (32,000 Da)—purified 18.47-fold, recovery of 8.2%. Both lipases showed optimal activity at pH 8.0 and 35 °C, were activated by Ca²⁺, exhibited highest specificity towards coconut oil and p-nitrophenyl palmitate, and were stable in iso-octane and hexane. Ethanol supported higher lipase activity than methanol, and n-butanol inactivated both lipases. Crude lipase immobilized by entrapment within 4% (w/v) calcium alginate beads was more stable than the crude-free lipase preparation within the range pH 2.5–10.0 and 20–80 °C. The immobilized lipase preparation was used to catalyze the transesterification/methanolysis of coconut oil to biodiesel (fatty acyl methyl esters (FAMEs)) and was quantified by gas chromatography. The principal FAMEs were laurate (46.1%), myristate (22.3%), palmitate (9.9%), and oleate (7.2%), with minor amounts of caprylate, caprate, and stearate also present. The FAME profile was comparatively similar to NaOH-mediated transesterified biodiesel from coconut oil, but distinctly different to petroleum-derived diesel. This study concluded that Lasiodiplodia theobromae VBE1 lipases have potential for biodiesel production from coconut oil.     

Immobilization of Candida antarctica Lipase B by Adsorption to Green Coconut Fiber

An agroindustrial residue, green coconut fiber, was evaluated as support for immobilization of Candida antarctica type B (CALB) lipase by physical adsorption. The influence of several parameters, such as contact time, amount of enzyme offered to immobilization, and pH of lipase solution was analyzed to select a suitable immobilization protocol. Kinetic constants of soluble and immobilized lipases were assayed. Thermal and operational stability of the immobilized enzyme, obtained after 2 h of contact between coconut fiber and enzyme solution, containing 40 U/ml in 25 mM sodium phosphate buffer pH 7, were determined. CALB immobilization by adsorption on coconut fiber promoted an increase in thermal stability at 50 and 60 °C, as half-lives (t _1/2) of the immobilized enzyme were, respectively, 2- and 92-fold higher than the ones for soluble enzyme. Furthermore, operational stabilities of methyl butyrate hydrolysis and butyl butyrate synthesis were evaluated. After the third cycle of methyl butyrate hydrolysis, it retained less than 50% of the initial activity, while Novozyme 435 retained more than 70% after the tenth cycle. However, in the synthesis of butyl butyrate, CALB immobilized on coconut fiber showed a good operational stability when compared to Novozyme 435, retaining 80% of its initial activity after the sixth cycle of reaction.     

Enzymatic resolution of (RS)-2-arylpropionic acid thioesters by Candida rugosa lipase-catalyzed thiotransesterification or hydrolysis in organic solvents

An enzymatic resolution process was developed to produce (S)-naproxen ester, (S)-naproxen or (S)-ibuprofen from the corresponding racemic thioesters by using lipase-catalyzed thiotransesterification or hydrolysis in organic solvents. Enzyme activity is greatly enhanced when activated naproxen thioesters containing an electron-withdrawing group are the substrates. Unlike other lipases, Candida rugosa lipase may discern the sulfur moiety of the thioesters, and yields lower enzyme activity when compared to the corresponding oxygen-containing analogues. Enzyme performances were further compared under various conditions, i.e. different combinations of reaction type (thiotransesterification or hydrolysis), solvent (isooctane or cyclohexane), substrate (naproxen or ibuprofen thioesters) and lipase sources.     

Immobilization of Yarrowia lipolytica Lipase—a Comparison of Stability of Physical Adsorption and Covalent Attachment Techniques

Lipase immobilization offers unique advantages in terms of better process control, enhanced stability, predictable decay rates and improved economics. This work evaluated the immobilization of a highly active Yarrowia lipolytica lipase (YLL) by physical adsorption and covalent attachment. The enzyme was adsorbed on octyl–agarose and octadecyl–sepabeads supports by hydrophobic adsorption at low ionic strength and on MANAE–agarose support by ionic adsorption. CNBr–agarose was used as support for the covalent attachment immobilization. Immobilization yields of 71, 90 and 97% were obtained when Y. lipolytica lipase was immobilized into octyl–agarose, octadecyl–sepabeads and MANAE–agarose, respectively. However, the activity retention was lower (34% for octyl–agarose, 50% for octadecyl–sepabeads and 61% for MANAE–agarose), indicating that the immobilized lipase lost activity during immobilization procedures. Furthermore, immobilization by covalent attachment led to complete enzyme inactivation. Thermal deactivation was studied at a temperature range from 25 to 45°C and pH varying from 5.0 to 9.0 and revealed that the hydrophobic adsorption on octadecyl–sepabeads produced an appreciable stabilization of the biocatalyst. The octadecyl–sepabeads biocatalyst was almost tenfold more stable than free lipase, and its thermal deactivation profile was also modified. On the other hand, the Y. lipolytica lipase immobilized on octyl–agarose and MANAE–agarose supports presented low stability, even less than the free enzyme.     

General characterization of noncommercial microbial lipases in hydrolytic and synthetic reactions

Fourteen noncommercial preparations of microbial lipases were investigated with respect to their catalytic activity for hydrolysis and synthesis of ester bonds. Six of the lipases were derived from microorganisms that have not previously been described as lipase producers, and another four were characterized for the first time. The synthetic reactions were carried out in two solvents of different polarities (n-heptane and acetone) using a series of fatty acids and primary and secondary alcohols with different chain lengths. Under the culture conditions employed, Pseudomonas cepacia produced more active enzyme than the other microorganisms. The lipase preparations produced using Ovadendron sulphureo-ochraceum, Monascus mucoroides, Monascus sp., Fusarium oxysporum, Penicillium chrysogenum, Rhodotorula araucariae, Pseudomonas cepacia, Streptomyces halstedii, and Streptomyces sp. were the most efficient catalysts for hydrolysis at lipid-water interfaces. Enzyme preparations from P. cepacia, Streptomyces sp., S. halstedii, and R. araucariae were good biocatalysts for esterification in the polar medium (acetone). When the lipase preparations with the greatest activity for hydrolytic, reactions were excluded, regression analysis of the data for the hydrolytic and synthetic activities of the remaining lipase preparations yielded high multiple correllation coefficients for these reactions in both n-heptane and acetone (R=0.82 and 0.91, respectively).     

Esterification Activity of Novel Fungal and Yeast Lipases

The main objective of this work was the isolation and screening of microorganisms with potential for producing lipases for the synthesis of fatty esters as well as evaluating the specificity of the enzymes produced, using different alcohols (methanol, ethanol, n-propanol, and butanol) and fatty acids (oleic and lauric acids) as substrates. Promising biocatalysts for organic synthesis were obtained in this work. The isolated strains 69F and 161Y showed ability to efficiently catalyze the reaction for production of n-propyl oleate. Other strains can also be considered of potential interest, as 74F, 111Y, and 186Y. The future development of production using different substrates could result in cheap crude lipase of high importance to industrial applicability.     

Production of FAME and FAEE via Alcoholysis of Sunflower Oil by Eversa Lipases Immobilized on Hydrophobic Supports

The performance of two new commercial low-cost lipases Eversa® Transform and Eversa® Transform 2.0 immobilized in different supports was investigated. The two lipases were adsorbed on four different hydrophobic supports. Interesting results were obtained for both lipases and for the four supports. However, the most active derivative was prepared by immobilization of Eversa® Transform 2.0 on Sepabeads C-18. Ninety-nine percent of fatty acid ethyl ester was obtained, in 3 h at 40 °C, by using hexane as solvent, a molar ratio of 4:1 (ethanol/oil), and 10 wt% of immobilized biocatalyst. The final reaction mixture contained traces of monoacylglycerols but was completely free of diacylglycerols. After four reaction cycles, the immobilized biocatalyst preserved 75% of activity. Both lipases immobilized in Sepabeads C-18 were very active with ethanol and methanol as acceptors, but they were much more stable in the presence of ethanol.