飞秒激光在6H SiC晶体表面制备纳米微结构

激光诱导周期性纳米微结构在多种材料包括电介质、半导体、金属和聚合物中观察到。研究了800nm和400nm飞秒激光垂直聚焦于6H SiC晶体表面制备纳米微结构。实验观察到800nm和400nm线偏光照射样品表面分别得到周期为150nm和80nm的干涉条纹,800nm圆偏振激光单独照射样品表面得到粒径约100nm的纳米颗粒。偏振相互垂直的800nm和400nm激光同时照射晶体得到粒径约100nm的纳米颗粒阵列,该纳米阵列的方向随400nm激光强度增加而向400nm偏振方向偏转。利用二次谐波的观点对以上纳米结构的形成给出了解释。     

Laser synthesis and size tailor of carbon quantum dots

Carbon quantum dots (C-dots) with average sizes of about 3, 8, and 13 nm were synthesized by laser irradiation of graphite flakes in polymer solution. The obtained C-dots display size and excitation wavelength dependent photoluminescence behavior. The size control of C-dots can be realized by tuning laser pulse width. The original reason could be the effects of laser pulse width on the conditions of nucleation and growth of C-dots. Compared with short-pulse-width laser, the long-pulse-width laser would be better fitted to the size and morphology control of nanostructures in the different material systems.     

准分子激光增强高分子材料粘着力的机理研究

 由热方程计算激光与液体薄膜材料相互作用时的温度场,分析高分子材料表面熔化及材料表面液体膜汽化产生的材料的表面粗化;近一步分析高分子的断裂、F原子 替代等光化学反应;从而提出激光增强高分子材料的粘着力的表面粗化和光化学反应的机理。     

A study on the pulsed laser printing of liquid-phase exfoliated graphene for organic electronics

The aim of this work is the pulsed laser printing of liquid-phase exfoliated graphene in the nanosecond regime and the optimization of the printing process on Si/SiO₂ and flexible polymer substrates (polyethylene naphthalate) via the laser-induced forward transfer technique (LIFT). The laser printing conditions and the optimum energy fluence window for reproducible deposition have been investigated, while the deposited graphene features have been studied morphologically and structurally by means of optical microscopy, micro-Raman spectroscopy and electrical characterization. LIFT experiments were carried out using the fourth harmonic (266 nm) of a pulsed ns Nd:YAG laser combined with a high-power imaging micromachining system to monitor the printing process throughout the experiments. The irradiation of our graphene solution resulted in the deposition of well-resolved patterns on different surfaces, highlighting LIFT as an alternative technique for the printing and patterning of liquid-phase exfoliated graphene for organic electronics applications.     

Periodic surface nanostructures on polycrystalline ZnO induced by femtosecond laser pulses

Periodic surface nanostructures induced by femtosecond laser pulses on polycrystalline ZnO are presented. By translating the sample line-by-line under appropriate irradiation conditions, grating-like nanostructures with an average period of 160 nm are fabricated. The dependence of surface morphologies on the processing parameters, such as laser fluence, pulse number and laser polarization, are studied by scanning electronic microscope (SEM). In addition, photoluminescence (PL) analysis at room-temperature indicates that the PL intensity of the irradiated area increases significantly compared with the un-irradiated area. Using femtosecond laser pulses irradiation to fabricate periodic surface nanostructures on polycrystalline ZnO is efficient, simple and low cost, which shows great potential applications in ZnO-based optoelectronic devices.     

Thermal transport in semiconductor nanostructures,graphene,and related two-dimensional materials

We review experimental and theoretical results on thermal transport in semiconductor nanostructures(multilayer thin films, core/shell and segmented nanowires), single-and few-layer graphene, hexagonal boron nitride, molybdenum disulfide, and black phosphorus. Different possibilities of phonon engineering for optimization of electrical and heat conductions are discussed. The role of the phonon energy spectra modification on the thermal conductivity in semiconductor nanostructures is revealed. The dependence of thermal conductivity in graphene and related two-dimensional(2 D) materials on temperature, flake size, defect concentration, edge roughness, and strain is analyzed.     

1064nm纳秒激光对石墨烯的损伤效应研究

通过化学气相沉积法制备,并转移到基片得到1~3层石墨烯样品。利用霍尔效应及微区拉曼光谱测量,结合光学显微镜观察,分析了不同层数石墨烯在1064nm纳秒激光辐照下的损伤特性。实验发现1~3层石墨烯的激光损伤阈值依次降低,分别为:单层0.45J/cm2,2层0.34J/cm2,3层0.23J/cm2。激光强度超过阈值时,石墨烯薄膜电阻增大,载流子迁移率降低。通过光学显微镜观察发现局部区域破损,破损区域的拉曼光谱中1580cm-1左右的G峰和2700cm-1左右的2D峰高度比发生变化。实验结果表明1064nm纳秒激光辐照石墨烯主要为剥离作用。     

Strained graphene as a local probe for plasmon‐enhanced Raman scattering by gold nanostructures

We investigate with Raman spectroscopy how gold nanostructures of different shape, size and geometry locally modify a graphene cover layer through strain. The resulting phonon softening translates into frequency downshifts of up to 85 cm^–1 for the 2D‐mode of graphene. With spatially resolved and excitation dependent Raman measurements we demonstrate that the downshifted Raman peaks exclusively arise from strained graphene subject to plasmonic enhancement by the nanostructures. The signals arise from an area well below the size of the laser spot. They serve as a local probe for the interaction between graphene and intense light fields. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Nanosecond laser-induced reshaping of periodic silicon nanostructures

We demonstrated the use of laser-induced reshaping to produce periodic silicon nanostructures (PSNs) with different geometries. Periodically located silicon nanostructures were preformed by dry etching of a silicon wafer covered with a monolayer of self-assembled polystyrene nanospheres. These PSNs were reshaped under ambient conditions by irradiation with two kinds of nanosecond lasers (532 nm and 355 nm). The effects of the irradiation parameters on the reshaped geometry were systematically investigated. Vertical growth of the irradiated PSNs resulted from the epitaxial deposition of rich silicon vapor during laser irradiation. However, the growth was limited even with higher laser fluence because of the nanoscale structure, the size of which is smaller than the melting depth induced by the nanosecond lasers. The reshaped PSNs displayed reflection spectra that are tunable by varying the characteristics of reshaping-laser input. This method offers a promising approach for the site-selective fabrication of optically tunable 3D nanostructures.     

Combined effect of EUV irradiation and acetone treatment on PET surface

In this work, the radiation from a laser-plasma extreme ultraviolet (EUV) source based on a double-stream gas-puff target was used for surface modification of polyethylene terephthalate (PET). The spectrum of the wide band radiation focused with a gold-coated ellipsoidal collector consisted of a narrow feature with maximum at 10 nm and a long-wavelength tail up to 70 nm. The PET samples were mounted in the focal plane of the EUV collector or at some distance downstream this plane and irradiated for 0.1 s–2 min with 10-Hz repetition rate. The polymer samples after irradiation were rinsed in acetone. Surface morphologies of the PET samples after irradiation were investigated using a scanning electron microscope and atomic force microscope. Different kinds of surface micro- and nanostructures were created as a result of irradiation depending on the EUV fluence and number of pulses. Acetone treatment of the polymer samples after irradiation resulted in formation of additional nanostructures. In this case the nanostructures were revealed even after exposure with a single EUV pulse.     

Formation of periodic surface nanostructures on Ti:Al2O3 crystals using femtosecond laser pulses

Periodic surface nanostructures are observed on Ti³⁺:Al₂O₃ single crystals that have been irradiated by a single focused beam from a femtosecond pulsed laser (wavelength: 800 nm; pulse duration: 130 and 152 fs). Atomic force microscopy images of single-ablated zones and modified structures created by fixing and translating samples through the focal region of a linearly polarized laser beam reveal self-organized periodic surface nanostructures (ripples) with a subwavelength spacing, which are oriented perpendicular to the electric-field vector of the laser beam. The period of the subwavelength ripples obtained by linearly polarized laser irradiation varies from ∼λ/5 to 2λ/5 (λ: incident laser wavelength) depending on the laser pulse energy. This phenomenon can be explained by assuming that the incident light field interferes with the electric field of electron plasma waves propagating inside the material; this interference periodically modulates the electron plasma density and modifies the surface ablation. In addition, for the first time, we observe screw-shaped nanostructures in the focal spot of circularly polarized beam irradiation. The morphology of these nanostructures appears to reflect the circular polarization of the laser light.     

不同烧蚀条件下飞秒激光脉冲诱导ZnO纳米结构研究

烧蚀条件对飞秒激光脉冲诱导氧化锌纳米结构有重要影响.研究了800 nm,150 fs,250 kHz的飞秒激光脉冲分别在空气中,去离子水中以及无水乙醇中垂直聚焦于氧化锌晶体表面,诱导形成不同形态的纳米结构.实验结果表明,在空气中利用飞秒激光脉冲辐照样品表面,形成了周期为180 nm的纳米线;在去离子水中辐照诱导形成了由氧化锌纳米线聚集而成的"纳米球";在无水乙醇中形成出现分叉结构的纳米线.拉曼光谱分析辐照前后晶体晶相结果表明,形成的纳米结构相对于辐照前特征峰437 cm-1强度有所下降,在570 cm-1处的峰值则显著增强.分析了在各种烧蚀条件下诱导形成纳米结构的演化过程以及物理机理.     

Surface modification of poly[2-methoxy,5-(2′-ethyl-hexyloxy)-1,4-phenylene-vinylene] in the optical near field

We have studied the optical properties and the surface morphology of the conjugated polymer poly[2-methoxy,5-(2′-ethyl-hexyloxy)-1,4-phenylene-vinylene] (MEH-PPV), under laser irradiation at 488 nm emanating from the Al coated fiber probe of a near field scanning optical microscope. Laser irradiation of the polymer in the near field induces a degradation of the material demonstrated by a dynamic change in its optical transmission. The surface of the material is modified primarily by heat conduction from the fiber probe, which under our experimental conditions is the dominant heating mechanism in the near field.     

Theoretical and Experimental Investigation of the Formation of High Spatial Frequency Periodic Structures on Metal Surfaces Irradiated by Ultrashort Laser Pulses

Experimental results on the formation of small-scale periodic nanostructures during ablation of solids by pico- and femtosecond laser pulses are presented. The period of these nanostructures is in the range of 50 to 100 nm, and they may coexist with known periodic nanostructures, whose period and orientation is determined by the laser wavelength and amounts to several hundreds of nanometers. The formation of high-frequency periodic structures with a period of about 100nm is theoretically analyzed by joint numerical solution of the heat conduction problem and Navier?Stokes equation. It is shown that their orientation is determined by the melt bath geometry.     

Ultrafast Nonlinear Optical Properties of a Graphene Saturable Mirror in the 2 μm Wavelength Region

Mid‐infrared ultrafast lasers have emerged as a promising platform for both science and industry because of their inherent high raw power and eye‐safe spectrum. 2D nanostructures such as graphene have emerged as promising photonic materials for laser mode‐locking to generate ultrashort pulses. However, there are still many unanswered questions about graphene's key advantages to be practical devices, especially over the matured semiconductor saturable absorber mirror (SESAM). In this work, we conducted systematic comparisons on the nonlinear optical properties of graphene and that of a commercial SESAM at 2 μm wavelength. Our results showed that graphene has significant advantages over the commercial SESAM, exhibiting ∼28% less absorptive cross‐section ratio of excited‐state to ground‐state and ∼50 times faster relaxation time. This implies that graphene can be exploited as a better mode‐locker than the current commercial SESAM for high power, high repetition rate and ultrafast mid‐infrared laser sources.     

Photothermal biological effects of monomeric erythrocyte using optical tweezers

The changes of mechanical properties and biological activities of monomeric erythrocytes are studied using optical tweezers micromanipulation technology. Firstly, the mechanical properties of irradiated erythrocyte membranes are obtained. Weaker power laser irradiation can delay the decay of the mechanical properties of erythrocytes and promote the biological activity of erythrocytes, while higher power laser irradiation damages erythrocytes. The stronger the laser irradiation is, the more obvious and rapid the damage will be. The temperature of the cell surface will be changed by regulating the laser power and irradiation time, so the biological functions of erythrocyte can be controlled. Secondly, the finite element simulation of the temperature change on the cell surface under the condition of laser irradiation is carried out using simulation software, and the precise temperature of the cell surface irradiated cumulatively by a laser with different powers is obtained. Finally, the processes of abscission, unfolding, and denaturation of hemoglobins in erythrocytes at different temperatures due to the photothermal effect are analyzed using the model. The mechanism of laser irradiation on the elasticity of erythrocyte membranes is also obtained.     

Surface roughness assisted 100 kHz femtosecond laser induced nanostructure formation on silicon surface

Spontaneous nanostructure formations on roughened and smooth silicon surface by the femtosecond laser irradiation with the repetition rate of 100 kHz were systematically studied. In addition to the widely accepted so-called coarse ripple, which has the period analogous to the wavelength of the laser beam and aligns perpendicularly to the electric field of the incident laser beam, the ripple which has the period similar to the wavelength of the incident laser beam but aligns parallel to the electric field of the laser beam was observed on the roughened surface for the lower fluence and the higher number of pulse irradiation. Furthermore, the ensemble of dots formed by the enhancement of the local electric field was found on the roughened surface. This structure is preferentially formed around the scratches aligned perpendicularly to the electric field of the laser beam. These novel nanostructures are considered to be peculiar to the femtosecond laser irradiation and open the possibilities for precise control of the spontaneous nanostructure formation by femtosecond laser irradiation.     

Transport in graphene nanostructures

Graphene nanostructures are promising candidates for future nanoelectronics and solid-state quantum information technology. In this review we provide an overview of a number of electron transport experiments on etched graphene nanostructures. We briefly revisit the electronic properties and the transport characteristics of bulk, i.e., two-dimensional graphene. The fabrication techniques for making graphene nanostructures such as nanoribbons, single electron transistors and quantum dots, mainly based on a dry etching ??paper-cutting?? technique are discussed in detail. The limitations of the current fabrication technology are discussed when we outline the quantum transport properties of the nanostructured devices. In particular we focus here on transport through graphene nanoribbons and constrictions, single electron transistors as well as on graphene quantum dots including double quantum dots. These quasi-one-dimensional (nanoribbons) and quasi-zero-dimensional (quantum dots) graphene nanostructures show a clear route of how to overcome the gapless nature of graphene allowing the confinement of individual carriers and their control by lateral graphene gates and charge detectors. In particular, we emphasize that graphene quantum dots and double quantum dots are very promising systems for spin-based solid state quantum computation, since they are believed to have exceptionally long spin coherence times due to weak spin-orbit coupling and weak hyperfine interaction in graphene.     

Fabrication of micro/nano crystalline ITO structures by femtosecond laser pulses

A method is proposed for the fabrication of micro/nano crystalline indium tin oxide (c-ITO) structures using a Ti:Sapphire laser with a repetition rate of 1 kHz and a wavelength of 800 nm. In the proposed approach, an amorphous ITO (a-ITO) thin film is transformed into a c-ITO micro/nano structure over a predetermined area via laser beam irradiation, and the residual a-ITO thin film is then removed using an etchant solution. The fabricated c-ITO structures are observed using scanning electron microscopy (SEM) and cross-sectional transmission electron microscopy (TEM). The observation results show that the use of a low repetition rate laser induces a high thermal cycling effect within the ITO film and therefore prompts the formation of micro-cracks in the c-ITO structure. In addition, it is shown that as the laser power approaches the ablation threshold of the a-ITO thin film, nanogratings and disordered nanostructures are formed along the center lines of the c-ITO patterns formed using linearly polarized and circularly polarized laser beam irradiation, respectively. The nanogratings are found to have a period of approximately 200 nm (i.e. one-quarter of the irradiation wavelength), while the nanostructures have an average diameter of approximately 100–160 nm.     

Uniform plasmonic near-field nanopatterning by backward irradiation of femtosecond laser

We present localized optical field distribution properties in the vicinity of gold particles on a silicon substrate by backward and forward irradiation. It is technically difficult to fabricate nanostructures on the surface by a conventional forward laser incident to the substrate because gold nanoparticles easily aggregate to form double-layered particle arrays. We calculated enhanced optical field properties in order to pattern the substrate surface only with a template of the bottom-layered particle arrays in the case that the backward irradiation of a femtosecond laser is used in the system of aggregated double-layered gold nanoparticle arrays. With the backward irradiation, the optical field intensity in the substrate for the double-layered hexagonal arrays is found to be only 30% lower than the mono-layered system. Moreover, a near field cannot be generated with the forward irradiation. As a result, only the backward irradiation scheme is found to be effective for uniform surface nanopatterning at enhanced plasmonic near-field zones.