Syntheses and structures of zinc and tin(II) compounds with hemilabile N-silyl-tert-butylamido and N-silyl-p-tolylamido ligands that contain pendent tert-butoxy groups

Syntheses and solid-state structures of zinc and tin(II) compounds, containing the N-silyl-amide ligands (O^tBu)(NR)SiMe₂, R = ^tBu (L^tBu), or R = p-tolyl (L^pTol), are reported. The N-silyl amines were synthesized by modified published procedures from commercially available Me₂SiCl₂, ^tBuOH, and ^tBuNH₂, or p-Me-C₆H₄NH₂, respectively. Treatment of SnCl₂ with LiL^pTol furnished Sn(L^pTol)₂, which was X-ray structurally characterized and shown to contain two covalent Sn-N bonds and two asymmetrical O → Sn donor bonds. The single-crystal X-ray structure of Sn(L^tBu)₂ revealed a much more symmetrically-coordinated, pseudo-trigonal-bipyramidal tin atom. Aminolysis of diethylzinc with HL^pTol produced [EtZn(L^pTol)]₂, which crystallized as a centrosymmetric dimer, containing four-coordinate zinc atoms connected by bridging amides. Zinc dichloride, by contrast, reacted with two equivalents of LiL^tBu to produce the homoleptic, pseudo-spirocyclic Zn(L^tBu)₂.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Efficient cleavage of carboxylic tert-butyl and 1-adamantyl esters, and N-Boc-amines using H2SO4 in CH2Cl2

A new procedure for the deprotection of carboxylic tert-butyl and 1-adamantyl esters, and N-Boc-amines using H₂SO₄ in CH₂Cl₂ is described. The proposed method is simple, cheap, eco-friendly and represents a valid alternative to existing ones, with special significance in large scale applications.     

Catalytic photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine and carbon dioxide

Photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine (TMB) in MeCN under bubbling of CO₂ proceeded with high catalytic efficiency, giving 3,3-diphenylacrylic acid (DPA) and 3-hydroxy-3,3-diphenylpropionic acid (20). The turnover number (TON=(DPA+20)/TMB) reached 17. Similarly, 1-phenyl-1-cyclohexene yielded cis-2-acetamido-2-phenylcyclohexanecarboxylic acid with TON 5.9. As compared with related N,N-dimethylaniline derivatives, TMB is more resistant to photodecomposition, has the much larger absorbance in the S₀→S₁ transition, and has the lower quenching efficiency by CO₂. Probably these factors are partly responsible for the high TON observed for TMB.     

Synthesis of aza-aromatic hydroxylamine-O-sulfonates and their application to tandem nucleophilic addition-electrophilic 5-endo-trig cyclization

Hydroxylamine-O-sulfonic acid (HOSA) was used as an efficient nucleophilic amination reagent for 2-chloropyrimidines, 2-chloroquinolines, and 1-chloroisoquinoline. The newly obtained heteroaromatic hydroxylamine-O-sulfonates subjected to the reaction with acyl isothiocyanates underwent tandem nucleophilic addition-electrophilic 5-endo-trig cyclization. The mechanism of the cyclization was investigated with use of the long-range corrected hybrid density functional ωB97X-D/6-31+G^∗ and SM8 (DMF) solvation model. The structures of the heteroaromatic hydroxylamine-O-sulfonates and N-(5-methoxy-2H-[1,2,4]thiadiazolo[2,3-a]pyrimidin-2-ylidene)benzamide were confirmed by single crystal X-ray analysis. N-(2H-[1,2,4]thiadiazolo[3,2-a]isoquinolin-2-ylidene)benzamide exhibited a pronounced in vitro cytostatic activity against human tumor cell lines SISO, LCLC, A-427, DAN-G, and RT-4 (IC₅₀ in the range 1.47-2.97 μM).     

Synthesis, characterization and crystal structures of cyclometallated palladium (II) compounds containing difunctional ligands with [P,P], [As,As], [N,N], [P,As], [P,N] and [P,O] donor atoms

Treatment of the chloro-bridged dinuclear complex [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}(μ-Cl)]₂ (1) with homobidentate [P,P], [As,As], [N,N], and heterobidentate [P,As], [P,N] ligands in a 1:1 molar ratio gave the dinuclear complexes [{Pd[3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N](Cl)}₂{μ-L}] (L = Ph₂PC₄H₆(NH)CH₂PPh₂ (2); Ph₂As(CH₂)₂AsPh₂ (3); 1,3-(NH₂CH₂)₂C₆H₄ (4); Ph₂P(CH₂)₂AsPh₂ (5); Ph₂P(CH₂)₂NH₂ (6)), with the bidentate ligands bridging the two cyclometallated fragments.The reaction with the homobidentate ligands in a 1:2 molar ratio in the presence of NaClO₄ afforded the mononuclear compounds [[Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,P}][ClO₄] (L = Ph₂PC₄H₆(NH)CH₂PPh₂ (7); (o-Tol)₂P(CH₂)₂P(o-Tol)₂ (8)), [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂As(CH₂)₂AsPh₂-As,As}][ClO₄] (9) and [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-N,N}][ClO₄] (L = NH₂(CH₂)₃NH₂ (10); NH₂(C₆H₈)CH₂(C₆H₈)NH₂ (11); 1,3-(NH₂CH₂)₂C₆H₄ (12); 1,3-(NH₂)₂C₅H₃N (13); NH₂(C₆H₄)O(C₆H₄)NH₂ (14); NMe₂(CH₂)₂NMe₂ (15)), in which the chloro ligands are absent and the bidentate ligands are chelated to the palladium atom.Reaction of 1 with Ph₂P(CH₂)₂AsPh₂ in 1:2 molar ratio in acetone in the presence of NH₄PF₆ afforded the analogous mononuclear compound [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂P(CH₂)₂AsPh₂-P,As}][PF₆] (16); whereas reaction with Ph₂P(CH₂)₃NH₂ gave [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂P(CH₂)₃N(CMe₂)-P,N}][PF₆] (17), derived from intermolecular condensation between the aminophosphine and acetone. Condensation of the NH₂ group was precluded by change of solvent, using dichloromethane.Iminophoshines also reacted with 1 in 1:2 molar ratio in acetone to give a new series of mononuclear cyclometallated complexes: [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,N}][ClO₄] (L = Ph₂PC₆H₄C(H)NCy (20); Ph₂PC₆H₄C(H)NC(CH₃)₃ (21); Ph₂PC₆H₄C(H)NNMe₂ (22); Ph₂PC₆H₄C(H)NNHMe (23); Ph₂PC₆H₄C(H)NNHPh (24)). Analogous complexes with a stable P,O-chelate were obtained using bidentate [P,O] donor ligands: [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,O}][Cl] (L = 2-(Ph₂P)C₆H₄CHO (25); Ph₂PN(Me)C(O)Me (26)).The crystal structures of compounds 1, 5, 15, 16, 18, 20 have been determined by X-ray crystallography.     

A simple and efficient biphasic method for the preparation of 4-nitrophenyl N-methyl- and N-alkylcarbamates

Treatment of 4-nitrophenyl chloroformate with alkylammonium hydrochloride salts and solid anhydrous Na₂CO₃ in either CH₂Cl₂ or CH₃CN gave 4-nitrophenyl N-methylcarbamate and other N-alkylcarbamate analogues in excellent yields. Of particular interest is the observation that 4-nitrophenyl N-methylcarbamate, a safer alternative to the highly toxic methyl isocyanate, is obtained in quantitative yield (?95% pure as determined by ¹H NMR) after simple filtration and solvent evaporation.     

Synthesis, characterization and intercalation property of layered zirconium benzylamino-N,N-dimethylphosphonate phosphate materials

Layered zirconium benzylamino-N,N-dimethylphosphonate phosphate (ZBMPA) was prepared by the reaction of zirconyl chloride with benzylamino-N,N-dimethylphosphonic acid (H₂BMPA) and phosphoric acid in the presence of hydrofluoric acid. The intercalation of n-alkylamines (n-butylamine, n-heptylamine and n-decylamine) into ZBMPA was primarily investigated at room temperature. These materials were characterized by elemental analysis, ICP, XRD, SEM, FT-IR, Raman spectra, TG and DSC. The composition of ZBMPA is Zr(HPO₄)(C₆H₅CH₂N(CH₂PO₃)₂)_0.5 · 2.0H₂O. The interlayer distance of ZBMPA, n-butylamine, n-heptylamine and n-decylamine intercalation compounds is 2.03, 2.58, 2.52 and 3.17 nm, respectively. ZBMPA and the n-alkylamine intercalation compounds are different in the morphology and vibration spectra. Thermogravimetries of all materials obtained reveal three step mass losses at temperatures of up to 1000 °C. These results indicate that n-alkylamines are intercalated into the galleries of host ZBMPA.     

Geometry and chemical bonding in polyhedral boranes, metallaboranes, and dimetallaboranes: From closo to isocloso to oblatocloso polyhedra

The geometry and chemical bonding in the closo metal-free boranes and the isoelectronic carboranes and C₂B_n−2H_n with 2n + 2 skeletal electrons are based on the most spherical deltahedra with a preference for degree 5 vertices, particularly for the boron atoms. Such deltahedral boranes can be considered to be three-dimensional aromatic systems, as indicated by strongly diatropic nucleus independent chemical shift values for (n = 6, 8, 9, 12). Metallaborane structures, particularly those with 9-11 vertices and only 2n rather than 2n + 2 apparent skeletal electrons, are often based on isocloso deltahedra with the metal atom at a degree 6 vertex. Dimetallaborane structures, particularly the rhenium derivatives Cp₂Re₂B_n−2H_n−2 (8 ? n ? 12), are based on highly non-spherical and very oblate deltahedra with the metal atoms typically at degree 6 or 7 vertices, which are the lowest curvature sites of the deltahedra. A viable model for the skeletal bonding in such dimetallaboranes can be developed if each of the two metal vertices is assumed to contribute five internal orbitals to the skeletal bonding. This leads to 2n + 4 skeletal electrons, which are partitioned into n surface bonds and a formal metal-metal double bond inside the oblate deltahedron.     

Synthesis of N-acyl-N,O-acetals from N-aryl amides and acetals in the presence of TMSOTf

Secondary amides undergo in situ silyl imidate formation mediated by TMSOTf and an amine base, followed by addition to acetal acceptors to provide N-acyl-N,O-acetals in good yields. An analogous, high-yielding reaction is observed with 2-mercaptothiazoline as the silyl imidate precursor. Competing reduction of the acetal to the corresponding methyl ether via transfer hydrogenation can be circumvented by the replacement of CY₂NMe with 2,6-lutidine under otherwise identical reaction conditions.     

Preparation, spectroscopic properties of 1,4-di (N,N-diisopropylacetamido)-2,3(1H,4H)-quinoxalinedione (L) lanthanide complexes and the supramolecular structure of [Nd2L2(NO3)6(H2O)2]·H2O

The reaction of lanthanide nitrate with 1,4-di (N,N-diisopropylacetamido)-2,3(1H,4H)-quinoxalinedione (L) yields six novel Ln(III) complexes ([Ln₂L₂(NO₃)₆(H₂O)₂]·H₂O) which are characterized by elemental analysis, thermogravimetric analysis (TGA), conductivity measurements, IR, electronic and ¹H NMR spectroscopies. A new quinoxalinedione-based ligand is used as antenna ligand to sensitize the emission of lanthanide cations. The lowest triplet state energy level of the ligand in the nitrate complex matches better to the resonance level of Eu(III) and Sm(III) than Tb(III) and Dy(III) ion. The f-f fluorescence is induced in the Eu³⁺ and Sm³⁺ complexes by exciting into the π-π* absorptions of the ligand in the UV. Furthermore, the crystal structures of a novel binuclear complex [Nd₂L₂(NO₃)₆(H₂O)₂]·H₂O has been determined by single-crystal X-ray diffraction. The binuclear [Nd₂L₂(NO₃)₆(H₂O)₂]·H₂O complex units are linked by the intermolecular hydrogen bonds and π-π interactions to form a two-dimensional (2-D) layer supramolecule.     

First synthesis and characterization of SRR/RSS-Ezetimibe

The two stereoisomers, SRR-Ezetimibe 2 and RSS-Ezetimibe 3 are related substances of the cholesterol absorption inhibitor drug Ezetimibe 1. Herein, we present an efficient and practical synthesis approach to deliver these two stereoisomers for the first time, and a proof of SRR-Ezetimibe 2 by single-crystal X-ray analysis. Our research will be of immense help for organic chemists to study the impurity profile of Ezetimibe 1.     

Synthesis and characterization of new Rh complexes bearing CO, PPh3 and chelating P,O- or Se,Se-ligands: Application to hydroformylation of styrene

The complexes [Rh(CO)(PPh₃){Ph₂PNP(O)Ph₂-P,O}] (3), [Rh(CO)₂{Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (5), and [Rh(CO)(PPh₃){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (6), were synthesised by stepwise reactions of CO and PPh₃ with [Rh(cod){Ph₂PNP(O)Ph₂-P,O}] (2) and [Rh(cod){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (4), respectively. The complexes 3, 5 and 6 have been studied by IR, as well as ¹H and ³¹P NMR spectroscopy. The ν(CO) bands of complexes 3 and 6 appear at approximately 1960 cm⁻¹, indicating high electron density at the Rh^I centre. The structure of complexes 3 and 6 has been determined by X-ray crystallography, and the ³¹P NMR chemical shifts have been resolved via low temperature NMR experiments. Both complexes exhibit square planar geometry around the metal centre, with the five-membered ring of complex 3 being almost planar, and the six-membered ring of complex 6 adopting a slightly distorted boat conformation. The C-O bond of the carbonyl ligand is relatively weak in both complexes, due to strong π-back donation from the electron rich Rh^I centre. The catalytic activity of the complexes 2, 3 and 6 in the hydroformylation of styrene has been investigated. Complexes 2 and 3 showed satisfactory catalytic properties, whereas complex 6 had effectively no catalytic activity.     

Synthesis and characterization of n=5, 6 members of the La4Srn−4TinO3n+2 series with layered structure based upon perovskite

Layered compounds have been synthesized and structurally characterized for the n=5 and 6 members of the perovskite-related family La₄Sr_n−4Ti_nO_3n+2 by combining X-ray diffraction and transmission electron microscopy. Their structure can be regarded as comprising [(La,Sr)₅Ti₅O₁₇] and [(La,Sr)₆Ti₆O₂₀] perovskite blocks joined by crystallographic shears along the a-axis, with consecutive blocks shifted by 1/2 [100]_p. The n=5 member is similar to the previously reported n=5 member of other A_nB_nO_3n+2-related series. The n=6 member, which has only been briefly reported in other systems previously, is also a well-behaved member of this A_nB_nO_3n+2 series.     

N-Polyfluoroethyl and N-2-chlorodifluorovinyl derivatives of azoles

Reactions of tetrafluoroethylene, chlorotrifluoroethylene and 1,2-dichlorodifluoroethylene with N-potassium salts of imidazole, 2-methylbenzimidazole, 3,5-dimethylpyrazole, 1,2,4-triazole, and benzotriazole lead to the formation of the corresponding N-(1,1,2,2-tetrafluoroethyl), N-(2-chloro-1,1,2-trifluoroethyl), and N-(2-chloro-1,2-difluorovinyl) azoles. Treatment of N-(2-chloro-1,2-difluorovinyl) and N-(2-chloro-1,1,2-trifluoroethyl) derivatives of azoles with tetramethylammonium fluoride is a useful synthetic method for the preparation of heterocycles with 1,2,2,2-tetrafluoroethyl group attached to nitrogen.     

An efficient synthesis of furano analogs of duocarmycin C1 and C2: seco-iso-cyclopropylfurano[e]indoline-trimethoxyindole and seco-cyclopropylfurano[f]quinoline-trimethoxyindole

seco-Iso-cyclopropylfurano[e]indoline-trimethoxyindole 1 and seco-cyclopropylfurano[f]quinoline-trimethoxyindole 2 are potent cytotoxic agents. Previous synthesis of these compounds was inefficient and the approach required separation of a mixture containing the isomeric indoline and quinoline intermediates 11 and 12, formed from radical cyclization of allylic bromide 10. Reported herein is an efficient and selective synthesis of either intermediate 11 or 12, thus product 1 or 2, as needed. The conditions of the Stobbe condensation, bromination, 5-exo-trig radical cyclization, amine-carboxylic acid coupling, and debenzylation were optimized for multi gram scale. As a result, the reaction times were shortened, the products were readily isolated, and the yields and purity improved.     

Synthesis and structural characterization of enantiopure exo and endo six-membered oxazoline-derived palladacycles

Direct palladation of (S)-4-benzyl-2-methyl-2-oxazoline (1) and (S)-2-benzyl-4-tert-butyl-2-oxazoline (2) using Pd(OAc)₂ in MeCN afforded the corresponding μ-acetato-dimeric complexes with six-membered exo and endo palladacycles, respectively. The same complexes were obtained by reacting coordination complexes Pd(1)₂(OAc)₂ and Pd(2)₂(OAc)₂ with Pd(OAc)₂ in MeCN. Metalation of (S)-2,4-dibenzyl-2-oxazoline (3) with Pd(OAc)₂ in AcOH, MeCN or CH₂Cl₂ resulted in the regiospecific formation of the six-membered endo palladacycle. The obtained μ-acetato-dimeric complexes were converted to the corresponding μ-chloro-dimeric derivatives 7, 11 and 13 by treatment with LiCl in acetone. The mononuclear PPh₃ adducts 8, 12 and 14 were obtained by reacting dimers 7, 11 and 13 with PPh₃ in benzene. NMR spectroscopy data supported the proposed structures of all complexes and suggested that exo and endo palladacycles in 8 and 12 have rigid boat conformations in CHCl₃. The X-ray crystal structures of the μ-acetato dimer 6 with the exo palladacycle and the PPh₃ adduct 14 with the endo metalacycle revealed boat conformation of both palladacycles and chiral twisted conformations δ(S) and λ(S), respectively, of the oxazoline rings in the solid state.     

New and efficient RCM in pyridinic series: synthesis of 2H-dihydropyrano- or 2,3H-dihydrooxepino[3,2-b]pyridines

A new and very efficient route to polycyclic heterocycles with isosteric replacement of benzene by pyridine is reported. This strategy involving the RCM reaction in pyridinic series as a keystep allows us to prepare 2H-dihydropyrano- or 2,3H-dihydrooxepino[3,2-b]pyridines 1 and 2 in very good overall yields (47% and 44%, respectively).     

Stereochemistry and reactivity of F- and H-vinyldiazocarbonyl compounds and their phosphazines: synthesis of pyrazoles and pyridazines

3-(Trifluoromethyl)-substituted (F) 2-vinyl-2-diazocarbonyl compounds, having cis-relationship of functional groups (AlkO₂C, CN₂), do not undergo 1,5-electrocyclization, but readily take part in the tandem Staudinger-diaza-Wittig reactions to produce trifluoromethyl-substituted pyridazines, whereas their non-fluorinated analogs (H), with trans-configuration, easily cyclize to pyrazoles, but remain intact under Staudinger-diaza-Wittig reaction conditions. The difference in the reactivity of H- and F-vinyldiazoketones, vinyldiazoacetates, and derived phosphazines is apparently caused by the different stereochemical arrangements of the AlkO₂C and CN₂ groups.