糖厂澄清工段生产指标建模及操作参数优化

针对亚法糖厂澄清工段清汁色值和清汁残硫量难以在线测量的问题,提出了一种基于人工蜂群优化的在线极限学习机软测量方法。先用核主元分析法确定影响清汁质量的关键参数,建立基于在线极限学习机的软测量模型。同时利用人工蜂群算法对在线极限学习机的隐层参数进行寻优,优化所建模型。最后,使用带约束的粒子群对软测量模型进行优化求解,得到典型工况下的最优操作设定值,为后续工况操作提供参考依据。仿真结果表明,基于人工蜂群优化的在线极限学习机模型能够准确地预测清汁色值和残硫量,同时基于此模型优化的操作参数设定值能够达到期望的指标。     

多元混沌时间序列的多核极端学习机建模预测

多元混沌时间序列广泛存在于自然、经济、社会、工业等领域. 对多元混沌时间序列进行建模预测有助于人类更好地管理, 控制与决策. 针对多元混沌时间序列的建模预测问题, 本文提出一种基于多核极端学习机的预测方法. 首先对多元混沌时间序列进行相空间重构, 将多元混沌时间序列序列的时间相关性转化为空间相关性. 提出一种结合多核学习算法与核极端学习机模型的多核极端学习机建立相空间中输入输出数据的非线性映射. 多核极端学习机模型结合了多核学习算法的数据融合能力以及核极端学习机的训练简便优势. 基于Lorenz混沌时间序列预测和San Francisco河流月径流量预测的仿真实验表明, 与其他常见混沌时间序列预测方法相比, 本文提出的基于多核极端学习机的多元混沌时间序列预测方法具有更小的预测误差.     

基于优化核极限学习机的风电功率时间序列预测

针对时间序列预测,在单隐层前馈神经网络的基础上,基于进化计算的优化策略,提出了一种优化的核极限学习机(optimized kernel extreme learning machine,O-KELM)方法.与极限学习机(extreme learning machine,ELM)方法相比,核极限学习机(kernel extreme learning machine,KELM)方法无须设定网络隐含层节点的数目,以核函数表示未知的隐含层非线性特征映射,通过正则化最小二乘算法计算网络的输出权值,它能以极快的学习速度获得良好的推广性.在KELM的基础上,分别将遗传算法、模拟退火、微分演化三种进化算法用于模型的结构输入选择、正则化系数以及核参数的优化选取,以进一步提高网络的性能.将O-KELM方法应用于标准Mackey-Glass混沌时间序列预测及某地区的风电功率时间序列预测实例中,在同等条件下,还与优化的极限学习机(optimized extreme learning machine,O-ELM)方法进行比较.实验结果表明,所提出的O-KELM方法在预测精度上优于O-ELM方法,表明了其有效性.     

纯电动汽车磷酸铁锂电池组的建模及优化

鉴于传统神经网络和支持向量机机理复杂、计算量大的缺陷,很难实时跟踪磷酸铁锂电池组复杂快速的内部反应,影响电池荷电状态的估算精度,提出应用一种简单、有效的极限学习机对一额定容量为100Ah、额定电压为72V的纯电动汽车磷酸铁锂电池组建模,并分别与BP神经网络、RBF神经网络、支持向量机进行对比。随后,以学习时间和泛化性能为优化目标,应用粒子群方法寻找最佳隐层节点个数。结果表明,基于极限学习机的磷酸铁锂电池组模型的学习时间、泛化性能优于BP神经网络、RBF神经网络、支持向量机;隐层节点优化后,模型的学习时间和泛化性能达到最优。     

一种风电功率混沌时间序列概率区间简易预测模型

本文基于极限学习机构建了一种简易模型以直接输出风电功率概率区间.同时,为优化模型训练过程中输出区间的性能,本文基于对数据集区间带偏差信息的分析构建了一种新的优化准则,并采用量子细菌觅食优化算法以获取问题的最优解,提高模型泛化能力.对比分析两个风电场在不同置信水平和不同优化准则下的概率预测结果,仿真表明本文模型具有更高的可靠性和更窄的区间带宽,可为风电并网安全稳定运行提供决策支持.     

600MW间接空冷散热器传热及防冻性能

以实际应用于600 MW间接空冷机组散热器中的福哥型四排翅片管为对象,进行流动和传热性能的热态风洞实验。根据实验数据,拟合得到了管束在不同迎面风速下的流动换热性能实验关联式。利用拟合出的实验关联式,以及典型600 MW间接空冷机组实际运行参数,建立低温环境下管束临界冻结长度的预测分析模型。在模型中考虑了迎面风速、平均环境空气温度以及机组负荷的影响。基于所建立的预测模型,以散热器临界冻结长度小于散热器总管长为基准,得到了间接空冷机组在不同迎面风速下,管内冷却水下降至0℃所对应的环境温度和机组负荷。研究结果可为600 MW间接空冷机组冬季低温防冻提供理论依据。     

基于波形叠加极限学习机的近红外光谱药品鉴别

近红外光谱药品鉴别作为识别假冒伪劣药品的一种有效技术手段,已被广泛应用到各大医疗行业和药品监督管理机构,并结合模式识别建模方法在基层药品打假中得到较好的推广。由于传统建模方法很难满足药品鉴别中大规模、多分类、快速建模等问题,因此采用一种基于波形叠加极限学习机(SWELM(CS))分类方法对光谱数据进行鉴别。通过选用极限学习机(ELM)作为光谱药品分类器,使得分类模型具有快速学习能力以及对训练样本不敏感的特点;由于极限学习机的连接权值和隐层神经元阈值是随机生成导致网络稳定性差,因此结合布谷鸟搜索算法优化分类模型参数;采用反双曲线正弦函数与Morlet小波函数叠加的激励函数代替ELM原有的单一激励函数改善了分类模型的收敛速度和稳健性。通过上述改进方法使得SWELM(CS)具有对训练样本不敏感性,布谷鸟参数优化的分类稳定性、波形叠加函数的强收敛性与信号特征提取能力。该方法为核函数提供的信号特征提取及拟合的思想,可推广到其他学习算法中以获取更高的分类准确度及稳定性。该实验选定西安杨森制药厂生产的249个近红外光谱药品样本作为研究的主要对象,重点研究光谱药品的二分类和多分类实验,实验证明SWELM(CS)分类器相比BP神经网络、标准ELM以及粒子群优化ELM等传统分类器算法具有更高的分类准确度、分类稳定性及更小的训练样本敏感性。     

利用完全复数极限学习机增强近场声全息空间分辨率

针对稀疏测量阵列条件下近场声全息重建结果空间分辨率不足的问题,提出了一种基于完全复数极限学习机的全息声压插值方法。该方法首先将已测量的全息面复声压和对应的测点坐标组成训练样本输入完全复数极限学习机,接着把插值点的坐标代入训练好的极限学习机,得到相应位置的复声压,实现全息数据的插值。利用插值后的全息数据进行重建,并与不做插值处理的重建结果和传统插值处理后的重建结果比较。仿真和实验结果均表明:与不做插值相比,该方法在不增加传声器的条件下显著提高了重建结果的空间分辨率。与基于支持向量机或传统极限学习机的插值方法相比,该方法速度更快,插值后重建结果精度更高。同时,通过添加噪声干扰验证了该方法的稳健性。      

采用优化极限学习机的多变量混沌时间序列预测

基于优化极限学习机理论, 提出一种多变量混沌时间序列预测方法. 该方法利用复合混沌和混沌变尺度算法对极限学习机的模型参数进行搜索和优化, 以提高极限学习机的泛化性能; 然后利用优化后的极限学习机对Rossler耦合系统的多变量混沌时序进行一步和多步预测, 并且与同类算法进行了比较, 结果表明了该方法的有效性, 且算法具有较强的抗噪能力; 最后讨论了预测结果和隐层神经元数目的关系.     

基于D-ELM的矿井气体FTIR光谱定量分析

为了对D-ELM的矿井气体定量分析效果进行比较和分析,建立了3种矿井气体定量分析模型,分别是SVM模型、极限学习机（ELM）模型和动态极限学习机（D-ELM）模型。由于每个模型每次预测结果在一定范围内变化,所以取每个模型运行10次预测结果平均均方根误差（ARMSE）、平均相关系数（AR）、平均模型运行时间（AT）来评价各模型对气体定量分析的性能。PSO-SVM模型的结果为:[0.054 2,0.998,200.38 ];ELM模型的结果为:[1.042 1,0.989 4,0.26];D ELM模型结果为:[0.043 8,1,2.01]。综合预测精度和预测速度表明,D ELM模型要优于另外2种模型。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.