Oxidative dehydrogenation of ethane over movmnw oxide catalysts

Catalysts based on mixed oxide of MoVMn are active at relatively low temperature for oxidative dehydrogenation of ethane. Incorporation of tungsten into MoVMn oxides enhances the catalytic activity. Enhancement of the activity is explained in the light of acid-base interaction accompanied with a redox mechanism of surface reoxidation. This revised version was published online in June 2006 with corrections to the Cover Date.     

Oxidative dehydrogenation of propane over Ni-Mo-Mg-O catalysts

In this work, a series of Ni-Mo-Mg-O catalysts with mesoporous structure prepared by sol-gel method were investigated for the oxidative dehydrogenation of propane (ODHP). The techniques of temperature-programmed reduction with H2 (H2-TPR), N2 adsorption-desorption, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and X-ray photoelectron spectra (XPS) were employed for catalyst characterization. It is found that the activity of the catalysts for ODHP increases first and then decreases with the increase of Mo content. The catalyst with a Mo/Ni atomic ratio of 1/1 exhibits the best catalytic activity, which gives the propene selectivity of 81.4% at a propane conversion of 11.3% under 600°C and maintains the good catalytic performance for 22 h on stream. This is related not only to its high reducibility and dispersion as revealed by TPR and XRD, but also to the formation of more selective oxygen species on the MoOx-NiO interface as identified by XPS.     

Oxidative dehydrogenation of propane

At temperatures near 650°C and residence times ofca. 3 s, the homogeneous oxidative dehydrogenation (OXD) of propane to propylene and ethylene approached oxygen limiting conditions, even when the reactor was filled with quartz chips. The addition of catalysts that are known to be effective in the OXD of ethane slightly increased the reaction rate, but the selectivities at a given conversion level were the same as those that were achieved in the homogeneous reaction.     

Oxidative dehydrogenation of ethane over sufated zirconia supported oxides catalysts

The oxidative dehydrogenation of ethane into ethylene has been investigated on metal oxide-based sulfated zirconia catalysts at temperatures of 400–600°C. It is found that the activity and selectivity toward ethylene depend on the nature of metal oxide and temperature and that Ni and V oxides supported on sulfated zirconia exhibited higher ethylene yields.     

Oxidative dehydrogenation of ethane with carbon dioxide over sulfated zirconia supported metal oxides catalysts

Several metal oxides supported on sulfated zirconia catalysts were tested for the oxidative dehydrogenation of ethane into ethylene by carbon dioxide. It is found that the catalytic behavior of supported oxide catalysts differ depending on the nature of metal oxides. Chromium oxide-sulfated zirconia exhibits the highest ethane conversion and medium level of ethylene selectivity, producing 38% ethylene yield at 50% ethane conversion at 650°C.     

Catalytic performance of silica-supported chromium oxide catalysts in ethane dehydrogenation with carbon dioxide

The oxidative dehydrogenation of ethane into ethylene by CO₂ over a series of silica-supported chromium oxide catalysts was investigated. The results showed that the catalysts were effective for the reaction and CO₂ in the feed promoted the catalytic activity. The 5%Cr/SiO₂ catalyst exhibited the excellent performance with 30.7% ethane conversion and 96.5% ethylene selectivity at 700^oC. ESR and UV-DRS were used to probe the active sites and the species with high valent states (Cr⁵⁺ and/or Cr⁶⁺) were found to be important for the reaction.     

Ammoxidation of ethane on oxide catalysts

Ammoxidation of ethane on chromium- and scandium-molybdenum oxide catalysts has been studied. The rate-determining step of acetonitrile formation is shown to be C–H bond breaking in n-paraffins.

---

- . , C–H -.

     

溶胶-凝胶法制备Cr-基催化剂及其CO2氧化乙烷制乙烯

以硝酸铬为Cr源,正硅酸乙酯为Si源,采用溶胶-凝胶法制备了Cr质量分数为2.5%~10%的Cr-基催化剂;采用XRD、BET、SEM、H₂ TPR等分析测试技术对催化剂的结构进行了表征;在微型固定床反应器中对催化剂乙烷二氧化碳氧化脱氢制乙烯的催化性能进行了评价,并考察了反应条件对催化性能的影响。结果表明,催化剂中Cr的质量分数大于5%时,Cr的物相为Cr₂O₃,但Cr质量分数较低时,检测不到Cr的物相;Cr质量分数为5%的催化剂具有较大的比表面积,Cr质量分数变大或变小,催化剂的比表面积都会减小;催化剂的孔径在2nm左右,并与Cr的质量分数关系不大;Cr质量分数为5%的催化剂具有最好的催化活性,在750℃的反应条件下,乙烷和二氧化碳的转化率可达79.29%和23.74%,乙烯的收率可达67.91%;Cr质量分数为5%的催化剂具有适宜的氧化还原性能,这有利于乙烷和二氧化碳的转化。     

Oxidative dehydrogenation of propane by nitrous oxide and/or oxygen over Co beta zeolite

The oxidative dehydrogenation of propane has been studied with nitrous oxide (or mixture of nitrous oxide and oxygen) as oxidant. Nitrous oxide is a more selective but less active oxidant as compared with molecular oxygen. Upon increasing the concentration of N2O in the reaction mixture of propane and oxygen results in a substantial increase of propane conversion, while the selectivity to propene remains constant. The synergistic effect of O₂ and N₂O leads to a threefold higher yield of propene relative to than that of oxygen or nitrous alone. This revised version was published online in June 2006 with corrections to the Cover Date.     

Oxidative dehydrogenation of ethylbenzene with carbon dioxide over zeolite-supported iron oxide catalysts

Oxidative dehydrogenation of ethylbenzene with carbon dioxide was carried out over ZSM-5 zeolite-supported iron oxide catalysts. In the presence of carbon dioxide, ethylbenzene was predominantly converted into styrene by oxidation. It was found that carbon dioxide in this reaction plays a role as a soft oxidant to greatly improve catalytic activity. An active phase for the dehydrogenation with carbon dioxide was suggested as rather reduced and isolated magnetite-like phase having oxygen deficiency in zeolite matrix.     

Oxidative dehydrogenation of isobutane to isobutylene over supported transition metal oxide catalysts

Para-selectivity of ZSM-5 zeolites with similar bulk Si/Al ratio, but different particle size and surface Al concentration has been investigated in toluene disproportionation. Results showed that enhancedpara-selectivity is a consequence not only of the particle size but also of the external surface aluminium concentration in the particles.     

P改性V-MCM-41催化剂的合成及其在丙烷直接脱氢中的应用（英文）

钒基催化剂的脱氢性能与表面氧钒物种的形态密切相关。为了进一步增强传统原位合成的V-MCM-41催化剂上钒物种的分散性,本研究通过在制备过程中添加有机磷前驱物的方法对其进行改性。采用XRD、N₂吸附-脱附、TPR、TPD、XPS、拉曼光谱及O₂脉冲等方法对催化剂的结构、钒物种形态及分散度进行了系统的表征。表征结果表明,P改性后V-MCM-41催化剂的比表面积随着P含量的增加而缓慢下降,但整体仍能保持有序的六方介孔结构;P改性后表面钒物种的还原性和分散性均得到改善,聚合形态的钒物种比例明显下降。丙烷脱氢反应结果表明P改性后催化剂的丙烷脱氢性能和稳定性均有提高。在Si/P投料物质的量比为30时制备的催化剂能够获得最大表面钒氧位点和最佳丙烷脱氢性能。     

Optimizing zeolite stabilized Pt-Zn catalysts for propane dehydrogenation

Propane dehydrogenation (PDH) provides an alternative route to non-petroleum based propylene and eligible catalysts with good overall performance are still bein...     

Oxidative dehydrogenation of ethane over Cr/ZSM-5 catalysts using CO2 as an oxidant

Highly active catalysts for oxidative dehydrogenation of ethane with CO2 were characterized by temperature-programmed reduction (TPR), temperature-programmed oxidation (TPO), Fourier transform infrared (FTIR) spectroscopy, and X-ray absorption fine-structure (XAFS) analysis. In the active catalysts, Cr/H-ZSM-5 (SiO2/Al2O3 > 190), Cr6+ = O, or possibly Cr5+ = O was the catalytic species on the zeolite support. In contrast, little Cr6+ (or Cr5+) was detected in the less-active catalysts. The Cr6+ (or Cr5+) species was reduced to an octahedral Cr3+ species by treatment with ethane at 773 K, and the reduced Cr species was reoxidized to the Cr6+ (or Cr5+) species by treatment with CO2 at 673-773 K. The Cr redox cycle played an important role in the catalyst's high activity.     

NbMCM-41 mesoporous molecular sieves in oxidative dehydrogenation of ethane and propane

It has been evidenced that the dissolution of niobium in silica mesoporous matrix significantly increases the catalytic effectiveness in the oxidative dehydrogenation of alkanes as compared with unsupported Nb₂O₅. This revised version was published online in June 2006 with corrections to the Cover Date.     

Modification of VPO catalysts for oxidative dehydrogenation of ethane

Based on the previously discussed hypothesis concerning the mechanism of conversion of paraffins, we have modified the structure of VPO catalysts by developing the (220) plane of VOHPO₄·0.5H₂O and introducing a bismuth additive. We have shown that this leads to an increase in the P/V ratio on the surface, an increase in the number of Lewis centers and the strength of such centers, and a change in the ratio of Lewis centers to Brönsted centers. The change in the surface characteristics of the samples, in accordance with the hypotheses, improves their properties in oxidative dehydrogenation of ethane, increasing the catalytic activity and the yield of the target product ethylene.     

Oxidative dehydrogenation of ethane to ethylene with carbon dioxide over supported Ga,Fe, and Cr-containing catalysts

Oxydative dehydrogenation of ethane to ethelene over Ga-, Fe- and Cr-oxide systems has been investigated. CO₂ was used as an oxidizing agent. The activity and stability of the synthesized catalysts were studied. The most efficient catalytic system was selected and the experimental conditions for the optimal conversion/selectivity ratio were found.     

HCl存在下CeO2基催化剂上乙烷氧化脱氢制乙烯

报道了一种HCl存在时温和条件下的乙烷氧化脱氢制乙烯催化转化新途径. 研究发现,在多种金属氧化物催化剂中,CeO₂呈现最佳乙烯生成的催化性能. 与纳米粒子相比,具有棒状和立方体状形貌的CeO₂纳米晶具有较高的乙烷转化率和乙烯选择性. 以MnO_x修饰CeO₂可进一步提高催化性能. 在8 wt% MnO_x-CeO₂催化剂上,723K反应2 h时乙烷转化率和乙烯选择性分别为94%和69%. 该催化剂性能稳定,反应100 h乙烯收率可保持在65%-70%. HCl的存在对乙烯的选择性生成起着至关重要的作用,一部分乙烯来自于氯乙烷的脱HCl反应.     

Oxidative dehydrogenation of propane in a dense tubular membrane reactor

Oxidative dehydrogenation of propane (ODP) to propylene was investigated in a dense tubular membrane reactor made of Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF) at 700^oC and 750^oC. The propylene selectivity in the membrane reactor (44.2%) is much higher than that in the fixed-bed reactor (15%) at the similar propane conversion (23-27%). Higher propylene selectivity in the membrane reactor was attributed to the lattice oxygen (O^2-) supplied through the membrane. This revised version was published online in June 2006 with corrections to the Cover Date.