Determination of xanthohumol in hops (Humulus lupulus L.) by nonaqueous CE

Xanthohumol (XN) is a prenylated chalcone with antimutagenic and anticancer activity from hops. A nonaqueous reverse polarity capillary electrophoretic method for the determination of XN in hop extract was developed and validated. The optimal parameters were a 64.5 cm long fused-silica capillary with 50 microm id at 25 degrees C; 30 kV negative voltage (anode at detector side of the capillary); nonaqueous buffer with 75 mM NaOH and 50 mM boric acid in methanol; hydrodynamical injection with 10 mbar for 40 s; and detection at 440 nm. XN, isoxanthohumol (IX), colupulone, adlupulone, and n-lupulone were well resolved on the electropherogram. The LOD for XN was 0.05 mg/L and RSD for peak area was below 3%. The amount of XN in different samples of hop pellets varied from 0.14 to 0.42%.     

Separation of living and dead polymers in synthetic polypeptide mixtures by nonaqueous capillary electrophoresis using differences in ionization states

The complexity in the mechanisms of polymerization of N-carboxyanhydrides requires the development of new analytical techniques able to separate mixtures of synthetic polypeptides. This work focuses on the separation of poly(N(epsilon)-trifluoroacetyl-L-lysine) (PTLL) mixtures by nonaqueous capillary electrophoresis (CE). The main goal of this work was to find electrophoretic conditions that permit the separation and the quantification of the dead polymer families that were previously identified in the samples. The influence of the pH of the electrolyte on the selectivity of the separation was carefully investigated. The mechanisms of separation of the PTTLs are discussed as a function of their ionization state. The separations obtained on a noncovalently coated capillary were compared with those obtained on a fused-silica capillary. Finally, using two different electrolytes, it is possible to quantify the three families of PTLLs, namely, the living PTLLs, the dead PTLLs with N-formyl end group and the dead PTLLs with a carboxylic end group. These results confirm the importance of CE for the separation of synthetic organic polymers in nonaqueous electrolytes.     

Calculation of alcohol conformations by molecular mechanics

The geometries and energies of simple alcohols were calculated with a molecular mechanics force field. The force field requires the application of the charge interaction model with charges calculated by the CNDO/2 method, the importance of electrostatic interactions for the equilibrium of rotamers about the C-O bond exceeds that of van der Waals interactions. The calculated rotamer populations are discussed with regard to the value of ¹H NMR coupling constants ³JHCOH and other experimental data.     

Sensitive determination of herbicides in food samples by nonaqueous CE using pressurized liquid extraction

We have developed a method involving extraction with mixtures of solvents under pressure (pressurized liquid extraction (PLE)) for the determination of triazine herbicides in a series of samples from the food industry. The organic extracts obtained were subjected to a clean-up step with SPE, using Oasis MCX sorbents, after which they were analyzed by NACE. Potato was chosen as a representative matrix of horticultural products since it has a high water content. Spiked potato samples were used to optimize extraction conditions. In order to compare the results obtained with NACE, different studies were also conducted using HPLC. The detection limits in NACE were similar to those found with HPLC and were of the order of 10-15 microg/kg, depending on the analyte. Satisfactory results were obtained on applying the method proposed for the potato matrix (PLE with separation by electrophoresis) to other food matrices such as other tubercles, fruits, vegetables and cereals.     

Determination of olive oil acidity by CE

In this work, a CE method for the determination of olive oil acidity was proposed. The method was based on an ethanolic extraction (at 60 degrees C) of the oil long-chain free fatty acids (LC-FFAs) components followed by CE determination in pH 6.86 phosphate buffer at 15 mmol/L concentration containing 4 mmol/L sodium dodecylbenzenesulfonate (SDBS), 10 mmol/L polyoxyethylene 23 lauryl ether (Brij 35), 2% v/v 1-octanol and 45% v/v ACN under indirect UV detection at 224 nm. Although this electrolyte promoted baseline separation of myristic acid (C14:0) (internal standard (IS)) and olive oil major components (palmitic acid (C16:0), oleic acid (C18:1c) and linoleic acid (C18:2cc)) in less than 8 min, after a few injections, the electropherogram profiles were severely altered (peak broadening, migration time shifts, etc.) and the current increased substantially. An adsorption study was conducted revealing that the dissolution of the capillary external polyimide coating during the electrophoretic run caused the detrimental effect. After removal of the capillary tip coating, ten consecutive injections could be performed without any disturbances and this simple procedure was, therefore, implemented during quantitative purposes. The reliability of the proposed method was further investigated by the determination of acidity of an extra virgin olive oil sample in comparison to the established methodology (AOCS method Ca 5a-40, alkaline volumetric titration (AVT)). No statistical differences were found within 95% confidence level. A % acidity of 0.39 +/- 0.02 was found for the olive oil sample under consideration.     

Determination of the molecular mass distribution of synthetic polymers by size-exclusion electrochromatography

The performance of size-exclusion electrochromatography (SEEC) for the mass distribution analysis of synthetic polymers was studied and compared to conventional, pressure-driven size-exclusion chromatography (SEC). Electroosmotic flow control, within-day, day-to-day and column-to-column repeatability were determined for SEEC with respect to retention and separation efficiency. It was shown that by using the retention ratio instead of the migration time, the precision of the mass distribution calculations is sufficiently high, and that similar distributions were obtained for a sample analyzed by pressure-driven SEC and by SEEC. Furthermore, hexafluoroisopropanol was demonstrated to be a new and potent solvent for SEEC. It was used for the separation of narrow polymethylmethacrylate standards and several commercially important polymers such as polycarbonate, polycaprolactam and poly(ethylene terephthalate), using UV detection in the deep UV region (195-230 nm).     

Determination of molecular weights and solubility parameters of high-polymers by gas chromatography

Summary A new method for the simultaneous determination of molecular weight and solubility parameter of high-polymer was proposed using the sample polymer as the solvent and a halogen as the solute in gas chromatography at two different temperatures. Molecular weights of Silicon Oil DC 550, 702, and 710, and of PEG 1500, 4000, and 6000 are 50000, 62300, and 89200, and 1500, 3100, and 6750, respectively. Solubility parameters of them are 8.1, 8.0, and 7.9, and 11.7, 11.6, and 11.6, respectively.

---

Gas-chromatographische Bestimmung von Molekulargewichten und Löslichkeitsparametern von Hochpolymeren

Zusammenfassung Bei der empfohlenen Methode wird eine gas-chromatographische Bestimmung bei zwei verschiedenen Temperaturen mit dem Polymeren als Lösungsmittel und einem Halogen als gelöster Substanz durchgeführt. Die Molekulargewichte von Silicon Oil DC 550, 702 und 710 sowie von PEG 1500, 4000 und 6000 wurden zu 50000, 62300, 89200, 1500, 3100 und 6750 gefunden; die entsprechenden Löslichkeitsparameter betragen 8,1, 8,0, 7,9, 11,7, 11,6 und 11,6.

The authors are indebted to Dr. Y. Dozen for his skilful measurements of molecular weights with the usual methods.     

Noncovalent coatings for the separation of synthetic polypeptides by nonaqueous capillary electrophoresis

Recently, we demonstrated the possibility to extend the range of capillary electrophoresis (CE) applications to the separation of non-water-soluble synthetic polymers. This work focuses on the control of the electro-osmotic flow (EOF) and on the limitation of the solute adsorption in nonaqueous electrolytes. For these purposes, different strategies were investigated. For the initial, a viscous additive (ethylene glycol or glycerol) was used in the electrolyte in order to decrease the EOF magnitude and, possibly, to compete with solute adsorption. A second strategy was to modify, before separation, the fused-silica capillary wall by the adsorption of poly(ethylene oxide) (PEO) via hydrogen bonding. The influence of the molecular mass of the adsorbed PEO on the EOF magnitude and direction was studied in electrolytes based on methanol/acetonitrile mixtures containing ammonium ions. For PEO molecular masses above 1000 g/mol, reversed (anodic) EOF were reported in accordance with previous results obtained with PEO covalently bonded capillaries. The influence of the nature and the concentration of the background electrolyte cation on the EOF magnitude and direction were also investigated. A third strategy consisted in modifying the capillary wall by the adsorption of a cationic polyelectrolyte layer. Advantageously, this polyelectrolyte layer suppressed the adsorption of the polymer solutes onto the capillary wall. The results obtained in this work confirm the high potential and the versatility of CE for the characterization of ionizable organic polymers in nonaqueous media.     

Determination of organic acids by CE and CEC methods

A comprehensive overview of the analysis of low-molecular-mass organic acids employing electromigration methods in the capillary format is given. This review includes papers published since 2003 and can be seen as an update of the review paper published by Galli et al. in 2003. Tables included in this review contain application papers describing the determination of organic acids from a variety of fields like the analysis of food and beverages, environmental samples, samples from clinical origin, and from natural products.     

Cluster analysis of molecular conformations

We describe a method for locating clusters of geometrically similar conformers in ensembles of chemical conformations. We first calculate the pairwise interconformational distance matrix in either torsional or Cartesian space and then use an agglomerative, single-link clustering method to define a hierarchy of clusterings in the same space. Especially good clusterings are distinguished by high values of the separation ratio: the ratio of the shortest intercluster distance to the characteristic threshold distance defining the clustering. We also discuss other statistics. The method has been embodied in a program called XCluster, which can display the distance matrix, the hierarchy of clusterings, and the clustering statistics in a variety of formats. XCluster can also write out the clustered conformations for subsequent or simultaneous viewing with a molecular visualization program. We demonstrate the sorts of insight that this approach affords with examples obtained from conformational search and molecular dynamics procedures. © 1994 by John Wiley & Sons, Inc.     

Separation of non-UV-absorbing synthetic polyelectrolytes by CE with contactless conductivity detection

A specific method for the separation and detection of non-UV-absorbing polyelectrolytes has been developed. The analysis of such polyelectrolytes by liquid chromatography is nearly impossible due to strong ionic interactions and charge density effects. CE makes use of these charge density effects and thus enables for proper separation. A capacitively coupled contactless conductivity detector has been applied for the detection in CE. A low molar mass poly(acrylic acid) sodium salt standard (PAA1.3k) was separated in free solution CE and detected with the contactless conductivity detector. Different amphoteric electrolytes have been tested for their applicability as BGE for the separation of polyelectrolytes with conductivity detection. It has been shown that the best detection results are obtained with an arginine-sorbate buffer.     

Ultrasonic solvent extraction and nonaqueous CE for the determination of herbicide residues in potatoes

In the present work we address the development of a simple and effective method for the determination of triazine herbicide residues in horticultural products by CE in nonaqueous media (NACE). Potato samples were selected as a representative matrix of such foods with a nonfatty content. Isolation of the analytes from the sample matrix was accomplished by extraction with organic solvents, assisted by ultrasound; a clean‐up step of the organic extracts was carried out with SPE, using an Oasis MCX® sorbent to retain the analytes directly from the organic medium. The detection limits achieved in spiked potatoes (1.7–4.0 μg/kg) were lower than the default value of maximum residue level (MRL) established by current EU legislation for pesticide residues in foodstuffs. The results obtained were compared with HPLC in order to evaluate the performance of the NACE procedure.     

Preparation of high molecular weight polyurethane particles by nonaqueous emulsion polyaddition

A versatile nonaqueous emulsion polyaddition process for the one-step fabrication of spherical polyurethane nanoparticles is presented. Three different emulsion systems were used consisting of N,N′-dimethylformamide (DMF) dispersed in n-hexane, acetonitrile dispersed in cyclohexane, and acetonitrile dispersed in tetradecane. After successful stabilization of the emulsion systems by using a poly(isoprene)-poly(methylmethacrylate) block copolymer, the fabrication of the polyurethanes was carried out within the dispersed polar phase. The polyurethane particles showed average diameters as small as 35 nm. Additionally, infrared (IR) characterization revealed that the formation of any urea, which decreases the mechanical properties of the polyurethanes, was prevented during the polyaddition. This was attributed to the anhydrous reaction conditions. Gel permeation chromatography (GPC) analysis demonstrated the average molecular weights (M _n) of the polyurethanes to be as high as 16,500 g/mol, corresponding to conversions of 0.98. Comparable molecular weights and conversions have not previously been achieved without the formation of urea.     

Dipole moments and molecular conformations of acetylpyrimidines

By comparing experimentally determined dipole moments with those derived from vector-addition and semiempirical computation using MNDO and AM 1 approximations the conformations of 4- and 5-acetylpyrimidines were found to be close to planar, while that of 2-acetylpyrimidine exhibited a torsion angle of 90°.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1387–1390, October, 1992.     

Determination of molecular parameters of hydroxyethyl and hydroxypropyl celluloses by chromatography with dual detection

Hydroxyethylcellulose (HEC) and hydroxypropylcellulose (HPC) were studied by means of size exclusion chromatography with dual detection, i.e. employing simultaneously a refractive index (concentration sensitive) and a multiangle light scattering (molecular weight sensitive) detectors. The eluent was water and water solutions containing different concentrations of ionic salts. Molecular weight distributions and averages, coefficients of the scaling law of molecular dimensions and unperturbed dimensions were thus obtained from a single polydisperse sample of each polymer. Measurements were performed at 25 degrees C and the anomalous chromatographic behaviour, due to a combination of ion and size exclusion mechanisms, found when using pure water as eluent is transformed into a size exclusion mechanism by the addition of ionic salts. However, the two polymers behave on a different way in presence of salts. Thus, HEC, which is of low degree of substitution (DS), is close to theta conditions in the aqueous salt solutions (i.e. the q exponent of the scaling law has a value close to 0.5), whereas in the case of HPC the addition of salt improves the quality of the solvent up to a value of q around 0.6. Unperturbed dimensions are also calculated for both celluloses.     

Determination of total basicity and available lysine in proteins by nonaqueous titrimetry

A simple method is presented for the determination of the available lysine residues of proteins. The sample is titrated directly with 0.05 or 0.1 M perchloric acid in anhydrous acetic or propionic acid to a potentiometric end-point. The titration is repeated after acylation of the sample. The difference between the two basicity values gives the available lysine content of the proteins. Results are provided for the available lysine contents of bovine serum albumin, human γ-globulin, β-casein, soya bean meals meat meal and milk protein; in most cases, they agree closely with literature data obtained by other methods. The standard error for the procedure is <3.9%.